Rechercher des projets européens

36 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Volvo/Renault Car-mechanic

Date du début: 1 juil. 2014, Date de fin: 30 juin 2016,

Four years ago our school, Tegelbruksskolan, ventured into an e-Twinning project with the French school, Lycée Profesionnel Ferdinand Dégruiller. Mrs Déleris and Mrs Wrentner have since worked together on two different projects. The natural next step was to enable our students, who are vocational Car-Mechanic students, to carry out a part of their vocational training abroad. The students have ben ...
Voir le projet

 2

 TERMINÉ 

"Тechnical achievements in motor vehicles in the service of environmental protection"

Date du début: 1 juil. 2016, Date de fin: 30 juin 2017,

...ld get professional and practical training in the car services in Sevilla - Spain. The visiting period will be from 6 – 20, March, 2017. Practical work will be realized in several car services "Renault", "Bosch", "Porshe", or other ones. The main objective of this project is the following:- Introduction to the technical characteristics, functional dependence of parts of the ecological vehicles.- ...
Voir le projet

 2

 TERMINÉ 

Smart Control and Diagnosis for Economic and Clean Engine (SCODECE)

Date du début: 30 sept. 2009, Date de fin: 30 déc. 2013,

...RD) programmed second half 2012- A video made by a professional of multimedia will be delivered.- 4 PhD students & 3 Postdocs recruited - their experience can benefit automotive systems companies (Renault, Peugeot, Ricardo, ...) or environmental/academic institutions.Are all partners and territories benefitting from the results?Target groups:These include the partner institutions (HEI, UPJV, UoS) ...
Voir le projet

 3

 TERMINÉ 

Demonstration of the feasibility of electric vehicles towards climate change mitigation (DemoEV)

Date du début: 1 sept. 2011, Date de fin: 31 déc. 2014,

...f EV in Malta. In socio-economic terms, additional jobs will be created to cater for the new vehicle technology. New electric vehicle ranges started arriving in Malta in 2013 (e.g. the Renault Zoe and the Kia Soul) prior to DemoEV’s final conference, which was attended by representatives from these and other companies involved in EVs; all interested in the project’s findings and Malta’s driv ...
Voir le projet

 4

 TERMINÉ 

Industrial Platform Demonstrator to achieve 95% recycling of the "end-of-life vehicle" (ICARRE 95)

Date du début: 1 sept. 2011, Date de fin: 1 juil. 2015,

...been formalised to avoid cross pollution. Two grades of recycled polypropylene developed during the project are now listed as authorised plastics for the making of panels in RENAULT cars. Dismantling is also used to extract parts for repairing old cars, a long-existing market limited by old-fashioned management. The ICARRE 95 project developed a modern alternative through quality control, tracea ...
Voir le projet

 5

 TERMINÉ 

Auslandspraktikum für kaufmännische Auszubildende in Brest/Szeged

Date du début: 1 juil. 2014, Date de fin: 1 juin 2016,

...us participants learn how to lead sales conversations and to understand their importance in retail. IFAC is also able to offer internship opportunities in car sales companies selling French brands (Renault, Citroen, Peugeot). Alongside the enhancement of professional skills, the project also focuses on the acquisition of social, personal, intercultural and linguistic competences. Cultural activiti ...
Voir le projet

 3

 TERMINÉ 

Европейска визия на професионалното обучение

Date du début: 1 sept. 2014, Date de fin: 31 août 2015,

...me, having its headquarters in Rimini, Italy. It ensures work placements in Angelo CIRIGLIANO TRANSPORTI. ZONA Ind.le TITO Scalo ( Rimini , Italy) logistic centers, sales and service-centers of Fiat, Renault, IVECO, Mercedes and Nissan in conformity with needs, interests and qualification of beneficiaries. Transnational mobility enables beneficiaries to easily adapt and self-actualize on the labor ...
Voir le projet

 2

 TERMINÉ 

SKILLS ON THE ROAD - mobilité dans le secteur de l'automobile

Date du début: 1 juin 2015, Date de fin: 31 mai 2017,

...of the 4 accompanying adults and 4 trainers. Young people will realize a intership for one month in Portugal and Spain to perform mechanical work on the air conditioning system in the Fiat, Citroen, Renault and Honda brands. The objectives of the project are: - to provide opportunities for youth to work with air conditioning systems in countries where the use of air conditioning is intense and w ...
Voir le projet

 3

 TERMINÉ 

Efficient Dual Clutch Şanzıman Stajı

Date du début: 1 juin 2015, Date de fin: 31 mai 2016,

...ent Dual Clutch (EDC) Gearbox Technology a major innovation in the automobile world and even accepted a revolution is one of the developments in the field. This technology has been used especially by Renault and Dacia and by the giant car companies such as Ford, Volvo, Nissan, Volkswagen, Audi, Bugatti, Skoda and Seat with different names in recent years. Nobody except for the technicians train ...
Voir le projet

 4

 TERMINÉ 

La mobilité Europe, un renforcement de l'appartenance à la citoyenneté européenne pour nos élèves de bac professionnel filière tertiaire

Date du début: 1 juin 2016, Date de fin: 31 mai 2017,

...ir future jobs for the last 2 years thanks to theoretical classes and thanks to their different work experiences in France in firms sometimes having a European or international development (Renault, PSA Peugeot Citroën, Vinci, Véolia, EADS, Catella Property Group France...).We are expecting the following results for the mobility project to come:* Concerning the students:- a cultural opening, and ...
Voir le projet

 5

 TERMINÉ 

Optimized Fuels for sustainable transport in Europe (OPTFUEL)

Date du début: 1 janv. 2009, Date de fin: 31 déc. 2012,

... this pathway with different parameter studies, dissemination of biomass supply concepts and the demonstration of BtL blend fuel in show cars are included. VOLKSWAGEN has joined forces with Ford and Renault providing test facilities for the new fuels which are produced by Choren Industries, the leading company in biomass gasification for synthetic transport fuels including adapted feedstock conce ...
Voir le projet

 11

 TERMINÉ 

ARAÇLARDA HİBRİT MOTOR TEKNOLOJİSİ

Date du début: 8 nov. 2016, Date de fin: 7 nov. 2017,

...n developed high cars. Examples of these are examples of some companies and cars that have been produced: the Opel Ampera, the Mercedes E300 Blu TEC HYBRID Toyota pirius, Toyota Avensis, Honda Civic, Renault fluan za, chevrolet malibu, among others. Produced hybrid vehicles being offered for such purposes as the consumer has a choice today. Especially active population resulting from traffic noise ...
Voir le projet

 6

 TERMINÉ 

Electric Smart Eco Vacuum Pump For Green Cars (ESEV-4-GR)

Date du début: 1 sept. 2015, Date de fin: 29 févr. 2016,

... units in the period between 2017-2026. The main customer groups of the safety system “low emission electric vacuum pump”, are the Vehicle Manufacturers of “green an low emissions cars”(VW, Renault, Opel, BMW, Mercedes..), and the Component manufacturers/tier1.
Voir le projet

 1

 TERMINÉ 

Hydrogen Mobility Europe 2 (H2ME 2)

Date du début: 1 mai 2016, Date de fin: 30 juin 2022,

...European manufacturers into the hydrogen sector, and demonstrate new vehicles across a range of platforms, with increased choice: new cars (Honda, and Daimler), new vans (range extended vehicles from Renault/Symbio and Renault/Nissan/Intelligent Energy) and a new medium sized urban delivery truck (Renault Trucks/Symbio). H2ME 2 develops an attractive proposition around range extended vehicles and ...
Voir le projet

 37

 TERMINÉ 

High Pressure Die Casting (HPDC) Lost-Core (LC) technology for the production of Aluminium Closed Deck blocks for next generation Euro7 engines (CORE 4.0)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2018,

...e Die Casting (HPDC) Lost-Core (LC) technology for the manufacturing and commercialization of a new Closed-Deck Aluminium Block for the M9T Diesel Engine, one of the next generation Euro 7 engines of Renault. The aim is to bring the HPDC-LC technology, which is currently at TRL 6 up to TRL9 for market take up. For this purpose during the project (2016-2017) the new Closed-Deck Aluminium product an ...
Voir le projet

 5

 TERMINÉ 

New Electric Vehicle Chassis-Cab 10-14 for urban logistic (NEC14)

Date du début: 1 avr. 2015, Date de fin: 31 mars 2017,

...ucks. It exist many small electric quadricycles. Gaz and electric trucks (up to 12 tons and plus) also exist. But in the “-3T5” category the only vehicles are derived from person vehicles (like Renault Kangoo, …) and offer less than 4 cu.m. Above that nothing between 5 cu.m and 16 cu.m. Our customers, our leasers confirm this current, and for still 3 years at least, situation: Mooville 4-9 is the ...
Voir le projet

 1

 TERMINÉ 

Hydrogen Mobility Europe (H2ME)

Date du début: 1 juin 2015, Date de fin: 31 mai 2020,

...nsortium to:• Trial a large fleet of FCEVs in diverse applications across Europe - 200 OEM FCEVs (Daimler and Hyundai) and 125 fuel cell range-extended vans (Symbio FCell collaborating with Renault) will be deployed• Deploy 29 state of the art refuelling stations, using technology from the full breadth of Europe’s hydrogen refuelling station providers. The scale will ensure that stations will be l ...
Voir le projet

 27

 TERMINÉ 

Quality and Production Control with Integrated Machine Vision (QualiLine-C-2.0)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2017,

...a supplier of high speed quality control and in-line metrology systems to leading multinationals (Nemak, Daimler, Sanofi, Epcos, Visteon) who produce parts for leading automotive companies (GE, AUDI, Renault, BMW, VW).Our custom-made inspection machines have been a huge success and our sales have increased from 1.2 million Euros in 2009 to 2.2 million Euros in 2013 and will be almost doubled in th ...
Voir le projet

 1

 TERMINÉ 

Optimized Structural components and add-ons to improve passive safety in new Electric Light Trucks and Vans (ELTVs) (OPTIBODY)

Date du début: 1 avr. 2011, Date de fin: 30 juin 2014,

...erman Federal Cabinet -19/08/2009), plans to get 1 million EVs on Germany by 2020; the Spanish Ministry of Industry intends to reach the 1 million EVs in Spain by 2014; manufacturers like RENAULT have forecasted 6 million EVs in Europe by 2010; besides, encouraging the EV is one of the main objectives of the Spanish presidency of the UE.OPTIBODY will imply decreases in severity of injuries as a re ...
Voir le projet

 10

 TERMINÉ 

Efficient Additivated Gasoline Lean Engine (EAGLE)

Date du début: 1 oct. 2016, Date de fin: 31 mars 2020,

The decrease of CO2 & particulates emissions is a main challenge of the automotive sector. European OEMs and automotive manufacturers need new long term technologies, still to be implemented by 2030. Currently, hybrid powertrains are considered as the main trend to achieve clean and efficient vehicles. EAGLE project is to improve energy efficiency of road transport vehicles by developing an ultra ...
Voir le projet

 9

 TERMINÉ 

NeMo : Hyper-Network for electroMobility (NeMo)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

Electromobility is a major factor towards transport decarbonisation. However a number of challenges (limited charging options, lack of interoperability, absence of a unified identification/payment process, energy grid overload, expensive charging tariffs) limit the potential for interoperable and seamless electromobility services to a wider of actors and geographic area, hindering electromobility ...
Voir le projet

 19

 TERMINÉ 

aDverse wEather eNvironmental Sensing systEm (DENSE)

Date du début: 1 juin 2016, Date de fin: 31 mai 2019,

Current driver assistance systems are not all-weather capable. They offer comfort and safety in sound environmental conditions. However, in adverse weather conditions where the accident risks are highest they malfunction or even fail. Now that we are progressing towards automated cars and work machines, the requirements of fully reliable environment perception are only accentuated. The project is ...
Voir le projet

 16

 TERMINÉ 

European Initiative to Enable Validation for Highly Automated Safe and Secure Systems (ENABLE-S3)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2019,

ENABLE-S3 will pave the way for accelerated application of highly automated and autonomous systems in the mobility domains automotive, aerospace, rail and maritime as well as in the health care domain. Virtual testing, verification and coverage-oriented test selection methods will enable validation with reasonable efforts. The resulting validation framework will ensure Europeans Industry competiti ...
Voir le projet

 76

 TERMINÉ 

Collaborative Robotics for Assembly and Kitting in Smart Manufacturing (ColRobot)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2019,

Manufacturing competitiveness depends largely on its productivity, flexibility and agility to react to market demands. Robots are a key element to achieve such competitiveness, especially if they are able to collaborate with humans in a shared workspace in the shop-floor, creating a co-working partnership. The paradigm for robot usage has changed from an idea in which robots work with complete aut ...
Voir le projet

 11

 TERMINÉ 

Twin-model based virtual manufacturing for machine tool-process simulation and control (TWIN-CONTROL)

Date du début: 1 oct. 2015, Date de fin: 30 sept. 2018,

Europe is the world’s largest manufacturer of machine tools but this position is threatened due to the emergence of Asian countries. However, Europe has world-class capabilities in the manufacture of high-value parts for such competitive sectors like aerospace & automotive and this has led to the creation of a high-technology, high-skill industry. European machine tool builders, part manufacturers ...
Voir le projet

 12

 TERMINÉ 

Coordination of Automated Road Transport Deployment for Europe (CARTRE)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2018,

Automated Road Transport (ART) is seen as one of the key technologies and major technological advancements influencing and shaping our future mobility and quality of life. The ART technology encompasses passenger cars, public transport vehicles, and urban and interurban freight transport and also extends to the road, IT and telecommunication infrastructure needed to guarantee safe and efficient op ...
Voir le projet

 36

 TERMINÉ 

Safe and COnnected aUtomation in road Transport (SCOUT)

Date du début: 1 juil. 2016, Date de fin: 30 juin 2018,

"The project "Safe and COnnected aUtomation in road Transport" (SCOUT) aims at identifying pathways for an accelerated proliferation of safe and connected high-degree automated driving in Europe, taking into account user needs and expectations, technical and non-technical gaps and risks, viable business models as well as international cooperation and competition.The analysis will start from a thor ...
Voir le projet

 12

 TERMINÉ 

New cooperative business models and guidance for sustainable city logistics (NOVELOG)

Date du début: 1 juin 2015, Date de fin: 31 mai 2018,

Urban areas represent the greatest challenges for freight transport and service trips, both in terms of goods distribution and service allocation performance, and environmental impacts (air emission, traffic congestion, road safety, accidents and noise). The salient scope of the proposal is the enabling of knowledge and understanding of freight distribution and service trips by providing guidance ...
Voir le projet

 28

 TERMINÉ 

REal World Advanced Technologies foR Diesel Engines (REWARD)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2018,

The overall objective of the REWARD project is to develop the knowhow, intellectual property rights and technical capabilities to adequately and cost-effectively produce cleaner, highly efficient Diesel powertrains and aftertreatment technologies for future cleaner class A, B, C, D and E passenger cars and light commercial vehicles (LCVs) up to 3,500 kg that “go beyond Euro 6 limits under Real Dri ...
Voir le projet

 16

 TERMINÉ 

European COmpetitiveness in Commercial Hybrid and AutoMotive PowertrainS (ECOCHAMPS)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2018,

The ECOCHAMPS project addresses topic GV-4-2014, Hybrid Light and Heavy Duty Vehicles. The work will, in a single coordinated project, address all aspects of this topic and will be conducted by 26 partners representing the European automotive industry (OEMs (EUCAR), suppliers (CLEPA), ESPs and universities (EARPA)) including members of ERTRAC and EGVIA. The objective is to achieve efficient, compa ...
Voir le projet

 28

 TERMINÉ 

Safety CaUsation, Benefits and Efficiency (SafetyCube)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2018,

The objective of SafetyCube is to develop an innovative road safety Decision Support System (DSS) that will enable policy-makers and stakeholders to select and implement the most appropriate strategies, measures and cost-effective approaches to reduce casualties of all road user types and all severities.At the core of the project will be a novel and comprehensive analysis of accident causation fac ...
Voir le projet

 18

 TERMINÉ 

Automotive Big Data Marketplace for Innovative Cross-sectorial Vehicle Data Services (AutoMat)

Date du début: 1 avr. 2015, Date de fin: 31 mars 2018,

Inside today's vehicles ~4000 CAN-Bus signals/sec are processed in comparison to very few signals in smart phones and alike. This large amount of continuously gathered vehicle data represents major big data business potentials, not only for the automotive industry but in particular for cross-sectorial industries with interdisciplinary applications. With today's proprietary approaches focusing on b ...
Voir le projet

 12

 TERMINÉ 

Energy Local Storage Advanced system (ELSA) (ELSA)

Date du début: 1 avr. 2015, Date de fin: 31 mars 2018,

Integration of distributed small/medium size storage systems can allow operating distribution grids much more flexibly, thus realizing smart grid features like local demand-supply balancing, congestion relief, peak shaving and effective RES integration. However, few technologically mature decentralized storage systems are commercially available today at affordable prices, while both viable busines ...
Voir le projet

 10

 TERMINÉ 

Training in Embedded Predictive Control and Optimization (TEMPO)

Date du début: 1 févr. 2014, Date de fin: 31 janv. 2018,

"TEMPO addresses the needs of European companies and society for embedded control technology, through training on cutting edge research in the rapidly emerging inter-disciplinary field of embedded predictive control and optimization. The key objectives are:- to expand the scientific and technical knowledge platform for Embedded Predictive Control and Optimization in Europe;- to exploit this platfo ...
Voir le projet

 12

 TERMINÉ 

Renewable source nanostructured precursors for carbon fibers (CARBOPREC)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2017,

"More and more industrial sectors (e.g. automotive, wind energy, boatbuilding) are demanding lightweight and high-performance composite materials, which represent a strong driver to develop the carbon fibre (CF) industry. Today, almost 80% of CF available on the market are using PolyAcryloNitrile (PAN) as the starting raw material because of its superior properties compared to pitch based carbon f ...
Voir le projet

 14

 TERMINÉ 

PELlets versus GRanulates: Irradiation, Manufacturing & Modelling (PELGRIMM)

Date du début: 1 janv. 2012, Date de fin: 30 juin 2017,

PELGRIMM is a 4 year project, addressing Minor-Actinide (MA) bearing fuel developments for Generation IV Fast Reactor Systems to support the Strategic Research Agenda (SRA) of the European Sustainable Nuclear Energy –Technology Platform (SNE-TP). Both options, MA homogeneous recycle in driver fuels with MA content at a few percent, and heterogeneous recycle on UO2 fuels bearing high MA contents, l ...
Voir le projet

 12