Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Flexible FE/BE Sensor Pilot Line for the Internet of Everything (IoSense)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2019,

The EU has set the stage to empower semiconductor manufacturing in Europe being one of the key drivers for innovation and employment and creator for answers to the challenges of the modern society. Aim of IoSense is to boost the European competitiveness of ECS industries by increasing the pilot production capacity and improving Time-to-Market for innovative microelectronics, accomplished by establ ...
Voir le projet

 33

 TERMINÉ 

Power Semiconductor and Electronics Manufacturing 4.0 (SemI40)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2019,

Addressing European Policies for 2020 and beyond the “Power Semiconductor and Electronics Manufacturing 4.0” (SemI40) project responds to the urgent need of increasing the competitiveness of the Semiconductor manufacturing industry in Europe through establishing smart, sustainable, and integrated ECS manufacturing. SemI40 will further pave the way for serving highly innovative electronic markets w ...
Voir le projet

 38

 TERMINÉ 

Innovative High Resolution Electro-Static printing of Multifunctional Materials. (Hi-Response)

Date du début: 1 mars 2015, Date de fin: 31 août 2018,

The EU is well placed to exploit printed electronic technologies to create greater economic and social benefits for the EU, but only if we are able to commercialise innovative technologies created within the EU.Ink jet printing technologies are at the forefront of printed electronic developments. However, Ink jet printing has only been able to achieve a resolution of >=10um and the viscosity of pr ...
Voir le projet

 14

 TERMINÉ 

Social innovation and light electric vehicle revolution on streets and ambient (Silver Stream)

Date du début: 1 juin 2015, Date de fin: 31 mai 2018,

The SilverStream project addresses the challenges associated with sustainable and affordable personal mobility for the growing and ageing population in congested European cities. The project combines both ergonomic concepts conceived for elderly people and advanced automotive technologies that are quiet, clean, energy efficient and safe. The particular objectives of SilverStream are: i) specificat ...
Voir le projet

 10

 TERMINÉ 

Integrated Components for Complexity Control in affordable electrified cars (3Ccar)

Date du début: 1 juin 2015, Date de fin: 31 mai 2018,

The 3Ccar project will provide highly integrated ECS Components for Complexity Control in thereby affordable electrified cars. The new semiconductors for Complexity management (Control, reduction) will offer the next level of energy efficiency in transportation systems.3Ccar’s impact is maximizing pragmatic strategy: Use semiconductor technology innovations to manage functionality & complexity inc ...
Voir le projet

 47

 TERMINÉ 

Enhanced substrates and GaN pilot lines enabling compact power applications (PowerBase)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2018,

The key objective of PowerBase “Enhanced substrates and GaN pilot lines enabling compact power applications” is to ensure the availability of Electronic Components and Systems (ECS) for key markets and for addressing societal challenges, aiming at keeping Europe at the forefront of the technology development, bridging the gap between research and exploitation, creating economic and employment grow ...
Voir le projet

 40

 TERMINÉ 

Micromachined terahertz systems -a new heterogeneous integration platform enabling the commercialization of the THz frequency spectrum (M3TERA)

Date du début: 1 févr. 2015, Date de fin: 31 janv. 2018,

This project envisions the wide-spread use of low-cost THz technology in our society, enabled by the proposed micromachined heterogeneous integration platform, which provides an unprecedented way to highly-integrated, volume-manufactuable, cost- and energy-efficient, reconfigurable submillimeter-wave and terahertz (THz) systems. The proposed THz integration platform is envisioned to initiate an im ...
Voir le projet

 8

 TERMINÉ 

European Network of competencies and platforms for Enabling SME from any sector building Innovative CPS products to sustain demand for European manufacturing (EuroCPS)

Date du début: 1 févr. 2015, Date de fin: 31 janv. 2018,

SMEs play a key role in European economies; they constitute the largest business block and provide the bulk of employment. They generate most of the innovative ideas for ICT and CPS-enabled IoT products, two areas which represent an inflection point for innovators and industry in Europe. EuroCPS is an ambitious project that aims to arm Europe with a network of design centres that will boost and i ...
Voir le projet

 15

 TERMINÉ 

Silicon Carbide Power Technology for Energy Eficient Devices (SPEED)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2017,

"Highly efficient Power Electronics (PE) employed in power generation, transmission, and distribution is the prerequisite for the Europe-wide penetration of renewable energies; improves the energy efficiency; increases the power quality and enables continuous voltage regulation, reactive power compensation and automated distribution. It also facilitates the integration of distributed resources lik ...
Voir le projet

 17

 TERMINÉ 

Next-COMM: Event-driven design approach to achieve maximum energy efficiency for the next generation digital communication circuits” (Next-COMM)

Date du début: 1 nov. 2015, Date de fin: 31 oct. 2017,

...nce which leads to higher data rates (closer to the theoretical limit). Improvement in energy-efficiency will help the European market get one step ahead of the competitors, mainly in the US and Asia.Infineon, as the host organization, is highly supportive to this idea gaining one of the top-level experts in asynchronous and continuous-time digital circuits to strengthen the European Semiconductor ...
Voir le projet

 1

 TERMINÉ 

Nano-carbons for versatile power supply modules (NANOCATE)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

The multidisciplinary consortium of the NanoCaTe project will develop a more efficient thermoelectric- and storage material based on nanocarbon (e.g. graphene and CNT) to reclaim waste heat by thermoelectric generators and to storage the energy in super capacitors or secondary batteries for manifold applications like pulsed sensors or mobile electronic devices.The integration of the developed mate ...
Voir le projet

 14

 TERMINÉ 

Silicon Microphone (SiMic)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

MEMS (Micro-Electrical-Mechanical System) based microphones, so called “silicon microphones” - are relevant in many applications as their manufacturability is better compared to electret condenser mics (ECM). Often MEMS mics hold embedded ADCs (Analog-to-Digital Converter) on the same CMOS chip. Those “digital output mics” perfectly fit into innovative digital products e.g. smart phones. Extremely ...
Voir le projet

 2

 TERMINÉ 

Embedded Multi-Core Systems for Mixed Criticality Applications in Dynamic and Changeable Real-Time Environments (EMC2)

Date du début: 1 avr. 2014, Date de fin: 30 juin 2017,

Embedded systems are the key innovation driver to improve almost all mechatronic products with cheaper and even new functionalities. Furthermore, they strongly support today's information society as inter-system communication enabler.Consequently boundaries of application domains are alleviated and ad-hoc connections and interoperability play an increasing role. At the same time, multi-core and ma ...
Voir le projet

 101

 TERMINÉ 

Excellence in Speed and Reliability for More Than Moore Technologies (ERAMP)

Date du début: 1 avr. 2014, Date de fin: 1 avr. 2017,

Europe’s strengths are based on the deep knowledge and market position in automotive industry, industrial electronics industry and leading know how for More-than-Moore based embedded system. It is of vital interest for the electronics manufacturers in Europe to have fast access to reliable prototypes of electronic devices as well as competitive advanced manufacturing of such devices made in Europe ...
Voir le projet

 26

 TERMINÉ 

Arrowhead (ARROWHEAD)

Date du début: 1 mars 2013, Date de fin: 28 févr. 2017,

"Our society is facing both energy and competitiveness challenges. These challenges are tightly linked and require new dynamic interactions between energy producers and energy consumers, between machines, between systems, between people and systems, etc. Cooperative automation is the key for these dynamic interactions and is enabled by the technology developed around the Internet of Things and Ser ...
Voir le projet

 87

 TERMINÉ 

MAssive MiMO for Efficient Transmission (MAMMOET)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2016,

The Internet of the future will to a large extent rely on mobile networks. Mobile data grew with 70% in 2012 and is predicted to grow 13-fold in the next 5 years. This puts very high demands on the development of mobile access technology. MAMMOET will advance the development of Massive MIMO (MaMi), a new and most promising direction in mobile access. MaMi makes a clean break with current technolog ...
Voir le projet

 8

 TERMINÉ 

Multi-entity-security using active Transmission Technology for improved Handling of Exportable security credentials Without privacy restrictions (MATTHEW)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2016,

With the increasing pervasion of our society by mobile devices like smart phones and tablets and many users running several security relevant applications on multiple mobile devices at the same time, security and privacy challenges outranging those on personal computers arise. In the near future, users are expected to move personal roles and identities between mobile platforms. Electronic represen ...
Voir le projet

 8

 TERMINÉ 

Holistic Energy Management for third and fourth generation of EVs:\neDAS = efficiency powered by smart Design meaningful Architecture connected Systems (eDAS)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2016,

Modern societies are eagerly looking for the integration of mobility and their urban living area to enable reliable and safe transportation, better efficiency and cost, comfort and low emissions for the environment. The trends are obvious, however, providing a hybrid/electrical car is only one part of the full picture. The "standard" customer is still very reluctant to buy a full electrical vehicl ...
Voir le projet

 17

 TERMINÉ 

INnovative COst efficient management system for next generation high voltage BATteries (INCOBAT)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2016,

In recent years, electric mobility has been promoted as the clean and cost-efficient alternative to combustion engines. Although there are already solutions on the market, mass take-up has not yet taken place. There are different challenges that hinder this process from an end user point of view such as costs of the vehicle, driving range, or infrastructure support. Several of these challenges are ...
Voir le projet

 8

 TERMINÉ 

Silicon Integrated Digital RF Transmitters for Massively Deployed Systems (SIDMAS)

Date du début: 1 sept. 2014, Date de fin: 31 août 2016,

... better services bringing great value for Europe’s society will be offered.Prof. Papananos expertise in RFIC design as well as in active and passive RF device modeling will complement the skills of Infineon’s R&D team towards the quest for a beyond state-of-the-art digital transmitter design. This cooperation will provide to the researcher an invaluable exposure to a leading industrial IC design e ...
Voir le projet

 1

 TERMINÉ 

Critical System Engineering Acceleration (CRYSTAL)

Date du début: 1 mai 2013, Date de fin: 31 juil. 2016,

CRYSTAL aims at fostering Europe’s leading edge position in embedded systems engineering in particular regarding quality and cost effectiveness of safety-critical embedded systems and architecture platforms.Its overall goal is to enable sustainable paths to speed up the maturation, integration, and cross-sectoral reusability of technological and methodological bricks of the factories for safety-cr ...
Voir le projet

 70

 TERMINÉ 

Enhanced Power Pilot Line - EPPL (EPPL)

Date du début: 1 avr. 2013, Date de fin: 31 mars 2016,

A sustainable and competitive European power semiconductor industry is essential to support the megatrend developments formulated in the Europe 2020 strategy - climate change, energy security, food security, and health and aging population. In practically all these areas, power semiconductors play a vital role. Thus, it is of paramount importance to defend and further extend Europe’s leading posit ...
Voir le projet

 33

 TERMINÉ 

Environmental Sensors for Energy Efficiency (ESEE)

Date du début: 1 avr. 2013, Date de fin: 31 mars 2016,

ESEE – Environment Sensors for Energy Efficiency targets the markets, were with highly reliable information regarding environmental conditions measures can be deducted, which safe the use of energy. The research will be performed on several different sensor technoglogy approaches and finally validated in a test environment, e.g. under the environmental conditions of an aircraft. In addition an app ...
Voir le projet

 27

 TERMINÉ 

POWER SoC With Integrated PassivEs (PowerSwipe)

Date du début: 1 oct. 2012, Date de fin: 31 mars 2016,

...th competencies covering the full supply chain from the main OEMs (Audi, BMW, Daimler, Fiat, PSA, RSA, VW) to Tier1 suppliers (Bosch, Continental, Magneti Marelli) to leading semiconductor companies (Infineon, ST). The vision for electronic automotive control units in 2020 is that the battery will supply multi-core µControllers via multiple power supplies using an on-chip, granular power managemen ...
Voir le projet

 9

 TERMINÉ 

Holistic Approaches for Integrity of ICT-Systems (HINT)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2015,

The security of modern ICT (Information and Communication Technologies) systems relies fundamentally on the integrity of hardware components. This is the case for user identification and authentication as in smartcards, e-Id, e-Passports, e-health devices or for the integrity checking of computers and mobile systems as in trusted computing and TPMs. But it is also the case for telecommunication i ...
Voir le projet

 9

 TERMINÉ 

European Library-based flow of Embedded Silicon and test Instruments (ELESIS)

Date du début: 1 juin 2012, Date de fin: 1 juin 2015,

This project aims to increase European Integrated Circuits (IC) quality and competitiveness by developing generic test instruments and interfaces which will drasticly improve the testability and reliability of ICs.Presently, production testing of ICs is done by large and expensive Automated Test Equipment (ATE). A disadvantage of this approach is that while the production cost of a transistor decr ...
Voir le projet

 16

 TERMINÉ 

Verification and Testing to Support Functional Safety Standards (VeTeSS)

Date du début: 1 mai 2012, Date de fin: 30 avr. 2015,

New safety standards, such as ISO 26262, present a challenge for companies producing safety-relevant embedded systems. Safety verification today is often ad-hoc and manual; it is done differently for digital and analogue, hardware and software.The VeTeSS project will develop standardized tools and methods for verification of the robustness of safety-relevant systems, particularly against transient ...
Voir le projet

 26

 TERMINÉ 

Enable power technologies on 300mm wafer diameter (EPT300)

Date du début: 1 avr. 2012, Date de fin: 1 mars 2015,

EPT 300 aims to be a decisive step forward to strengthen Europe’s leading position in power semiconductor technologies and More-than-Moore manufacturing capabilities relating to energy efficient electronic solutions. Power semiconductor devices fabricated in a European leading pilot line for 300mm wafer production are the scope of the project, for which manufacturing excellence, cost competitivene ...
Voir le projet

 22

 TERMINÉ 

DC Components and Grid (DCC+G)

Date du début: 1 avr. 2012, Date de fin: 1 mars 2015,

Europeans economic success depends highly on a safe, reliable and sustainable energy supply. The European Community has specified its 20-20-20 targets on energy consumption savings and electricity generation from renewable sources to reduce Europe’s dependency from imported energy sources, to conserve European fossil fuels for future generations and to reduce Europe’s CO2 footprint. Buildings cont ...
Voir le projet

 14

 TERMINÉ 

GaN-based normally-off high power switching transistor for efficient power converters (HiPoSwitch)

Date du début: 1 sept. 2011, Date de fin: 28 févr. 2015,

Highly efficient power electronics is needed for low volume and low weight future power conversion systems. The proposed project aims for the exploitation of novel gallium nitride (GaN) transistors for advanced switched power supplies. High voltage normally-off GaN power devices on Si substrates in vertical device architecture will be developed and its technology transferred to an European industr ...
Voir le projet

 9

 TERMINÉ 

Combined Model-based Analysis and Testing of Embedded Systems (MBAT)

Date du début: 1 nov. 2011, Date de fin: 31 déc. 2014,

"One of the most important strategic sectors in which Europe is developing, integrating and delivering high-quality products is the transportation domain. Here, high-class safety-related products as e.g. airplanes, cars and trains have a huge market impact. More and more of the market value of these vehicles is gained by embedded systems inside these products, and the number and importance of thes ...
Voir le projet

 42

 TERMINÉ 

Internet of Energy for Electric Mobility (IoE)

Date du début: 1 mai 2011, Date de fin: 31 oct. 2014,

The objective of Internet of Energy (IoE) is to develop hardware, software and middleware for seamless, secure connectivity and interoperability achieved by connecting the Internet with the energy grids. The application of the IoE will be the infrastructure for the electric mobility. The underlying architecture is of distributed Embedded Systems (ESs), combining power electronics, integrated circu ...
Voir le projet

 43

 TERMINÉ 

Verification for heterogeneous Reliable Design and Integration (Verdi)

Date du début: 1 sept. 2011, Date de fin: 31 août 2014,

Systems of Systems (SoS) are heterogeneous whereby the functionality more and more rely on the interaction and interoperability between the analogue/mixed-signal (AMS), digital electronics, software and other physical domains.To achieve the required reliability, robustness and quality of SoS, mastering the heterogeneous behaviour across domains is the most essential part during the development pro ...
Voir le projet

 8

 TERMINÉ 

Nanostructured ThermoElectric Systems for Green Transport & Energy Efficient Applications (NANOTEG)

Date du début: 1 juil. 2011, Date de fin: 1 juin 2014,

The concept of NANOTEG is to solve crucial cooling and energy-management issues in transport and energy-efficient applications, based on the technical leverage enabled by highly efficient nanostructured ThermoElectric (TE) modules compatible with high volume fabrication processes. Seven relevant industrial demonstrators will be produced to create a strong impact in 4 identified application domains ...
Voir le projet

 16

 TERMINÉ 

Agile RF Transceivers and Front-Ends for Future Smart Multi-Standard Communications Applications (ARTEMOS)

Date du début: 1 avr. 2011, Date de fin: 1 mars 2014,

This project aims at developing architecture and technologies for implementing agile radio frequency (RF) transceiver capacities in future radio communication products. These new architecture and technologies will be able to manage multi-standard (multi-band, multi-data-rate, and multi-waveform) operation with high modularity, low-power consumption, high reliability, high integration, low costs, l ...
Voir le projet

 41

 TERMINÉ 

Nanoelectronics for Electric Vehicle Intelligent Failsafe Drive Train (MOTORBRAIN)

Date du début: 1 avr. 2011, Date de fin: 1 mars 2014,

The overall objective is to develop sustainable drive train topologies including control concepts for inherently safe electric vehicle power-train. The project focuses on significant steps ahead in terms of: 1. Development of smart electrical power-train concepts comprising high efficiency torque dense motors fully integrated with power converters and storage systems for modularity, compactness re ...
Voir le projet

 30

 TERMINÉ 

Best-Reliable Ambient Intelligent Nano Sensor Systems (e-BRAINS)

Date du début: 1 sept. 2010, Date de fin: 28 févr. 2014,

Best-Reliable Ambient Intelligent Nanosensor Systems – e-BRAINS – represent a giant leap for outstanding future applications in the area of ambient living with the ultimate need for integration of heterogeneous technologies, high-performance nanosensor devices, miniaturization, smart wireless communication and best-reliability.e-BRAINS with minimum volume and weight as well as reduced power consum ...
Voir le projet

 20

 TERMINÉ 

Process Oriented Electrical Control Units for Electrical Vehicles Developed on a Multi-system Real-time Embedded Platform (POLLUX)

Date du début: 1 mars 2010, Date de fin: 30 sept. 2013,

"The objective of POLLUX is to develop a distributed real time embedded systems platform for next generation electric vehicles, by using a component and programming-based design methodology. Reference designs and embedded systems architectures for high efficiency innovative mechatronics systems will be addressed with regard to requirements on composability, networking, security, robustness, diagno ...
Voir le projet

 37

 TERMINÉ 

Secure, Embedded Platform with advanced Process Isolation and Anonymity Capabilities (SEPIA)

Date du début: 1 juin 2010, Date de fin: 31 mai 2013,

Mobile and embedded devices are rapidly evolving into powerful, ubiquitous personal assistants. As such, they will be involved in security-critical operations like authentication, payment, e-Banking and e-Government applications. Nevertheless, they have to be open platforms on which entertainment applications need to find their place. Being part of the Internet of Things, these platforms become an ...
Voir le projet

 6

 TERMINÉ 

Design methods for Radio Architectures GOing Nanoscale (DRAGON)

Date du début: 1 févr. 2010, Date de fin: 31 mai 2013,

Description DRAGON develops a design platform and novel flexible RF architectures for SoC( Systems on Chip) and SiP (Systems in Package).The DRAGON project seeks to achieve distinct reductions in cost, size and energy consumption for multi-standard cellular handsets, and other products employing similar technology, while meeting higher de ...
Voir le projet

 8