Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Flood zoning in Southeast Attica using gauge calibrated radar rainfall and advanced modeling techniques (FLADAR)

Date du début: 1 sept. 2007, Date de fin: 31 août 2011,

"The chief objective of the FLADAR project is to combine the main researcher’s expertise in flood assessment studies and the technical and personnel support of two major research institutes, the National Technical University of Athens (NTUA) and the National Observatory of Athens (NOA), to produce flood risk zones in selected areas southeast of Athens, Greece. No prior studies of flood risk maps e ...
Voir le projet

 1

 TERMINÉ 

The Greek Interoperability Centre: Enabling Research in the Interoperability Domain (G.I.C.)

Date du début: 1 févr. 2008, Date de fin: 31 janv. 2012,

...ic with high political and technological value. The main goal of the proposed project is to establish a new research centre targeting eGovernment and eBusiness Interoperability Research, within the National Technical University of Athens, the leading technological research institute in Greece. The Greek Interoperability Centre (G.I.C.) aims at becoming a premium research centre in the field of In ...
Voir le projet

 1

 TERMINÉ 

Marine Electrical Initiative (MARINELIVE)

Date du début: 15 déc. 2010, Date de fin: 14 juin 2014,

"MARINELIVE is an initiative both at a national and European level, aiming at establishing a Centre of Excellence in the field of Marine Electrical Engineering at the School of Naval Architecture & Marine Engineering of the National Technical University of Athens (NAME-NTUA), as well as at building a European community of ""All Electric Ship"" (AES) research and technology. MARINELIVE, focusing on ...
Voir le projet

 1

 TERMINÉ 

INtegrating the emerging research Potential of the University of Athens Cancer Research Group in the European research area (INsPiRE)

Date du début: 1 sept. 2011, Date de fin: 31 août 2014,

The main concept of INsPiRE is the scientific and technological reinforcement of the National & Kapodistrian University of Athens (NKUA) basic and translational Cancer Research Group (NKUA-CRG) towards its integration into the more advanced core of the European cancer research area. Thus, a central objective of the proposal is to gain a full convergence of NKUA-CRG to the European research area of ...
Voir le projet

 1

 TERMINÉ 

Spectroscopic and computational investigation of chromium binding on pure minerals and Asopos aquifer soils (SPECHROM)

Date du début: 1 juil. 2013, Date de fin: 30 juin 2015,

This project has two parallel research objectives to transfer and expand the expertise of the U.S.-based researcher, Dr. Maria Chrysochoou to the host institution, the National Technical University of Athens (NTUA). The first objective addresses a frequent environmental problem, the mobility of hexavalent chromium (Cr(VI)) in polluted groundwater. Surface complexation modeling relies in recent yea ...
Voir le projet

 1

 TERMINÉ 

KINOPTIM: An ICT solution for the implementation of an innovating fall prevention and holistic management service for the elderly community (KINOPTIM)

Date du début: 1 mars 2013, Date de fin: 28 févr. 2017,

...iated changes. It promises to redefine fall prevention by motivating people to be more active, in a friendly way and with tele-supervision if necessary. By covering the entire value-chain (academics: National Technical University of Athens, University of Orléans, University of Barcelona; private research organization: CEIT; Industry: SingularLogic, BRAINSTORM, MEDeTIC, health service provider: MED ...
Voir le projet

 8

 TERMINÉ 

Laser Digital Micro-Nano fabrication for Organic Electronics and Sensor applications (LaserMicroFab)

Date du début: 1 mars 2013, Date de fin: 28 févr. 2017,

LaserMicroFab proposes a joint research programme exploiting on the knowledge and expertise of two academic partners (National Technical University of Athens (NTUA) and CNRS-LP3) and one SME, Oxford Lasers (OL) through inter-sectorial exchange of knowledge, networking activities and training in the areas of advanced laser processing for organic electronic devices and biosensors. The goal for this ...
Voir le projet

 4

 TERMINÉ 

Κατάρτιση εκπαιδευτικών σε καινοτόμες εργαστηριακές εφαρμογές & τεχνικές αξιοποίησης πρώτων υλών, για την διαμόρφωση αρωμάτων από φυσικά εκχυλισματα & την ανάπτυξη φυτικών καλλυντικών & λοιπών αρωματικών προιόντων

Date du début: 1 sept. 2016, Date de fin: 31 août 2017,

...n between Sivitanidios Public School of Trades and Vocations, which is the applicant-sending organization and receiving partner organisation ASFO GRASSE.The company ASFO-GRASSE,( member of PRODAROM, National Association of Fragrance Manufacturers. Grasse, France ) has 30 years experience in education and training in the field of aromatic products and has established in 2002 the International Inst ...
Voir le projet

 2

 TERMINÉ 

European Format for Exchange of Social Security Education

Date du début: 1 sept. 2014, Date de fin: 31 août 2017,

This project responds to the need for and current absence of a truly comprehensive curriculum on social security. The latter means that all disciplinary (law, economics and social policy) and national perspectives are combined into one EU-wide curriculum. The only way to develop a widely accessible, comprehensive and European curriculum is to work with the virtual exchange of courses between diffe ...
Voir le projet

 4

 TERMINÉ 

Higher education student and staff mobility project

Date du début: 1 juin 2014, Date de fin: 30 sept. 2015,

...panies and organizations of the European Union and to teaching & administrative staff wishing to participate in teaching & training activities. The Programme takes place with the support of the Greek National Agency and the funding of the European Commission. The main subject areas to which the AUEB Consortium originally focused were Informatics, Economics and Business Administration, while durin ...
Voir le projet

 1

 TERMINÉ 

Development of A Cost Efficient Policy Tool for reduction of Particulate Matter in AIR (ACEPT-AIR)

Date du début: 1 sept. 2010, Date de fin: 31 août 2014,

...uction of 20% relative to average concentrations is the target set for all Member States, to be attained between 2010 and 2020. High ambient PM concentrations have been recorded in Greece. Although national air monitoring programmes record PM2.5 and PM10 levels at fixed operating stations, specifically nine stations in the project study areas, more information on source apportionment is needed to ...
Voir le projet

 5

 TERMINÉ 

Sustainable Management of E-waste in Greece (Sumanewag)

Date du début: 1 nov. 2001, Date de fin: 1 nov. 2003,

... Objectives The project included the promotion of policy actions, technical know-how and legislation at a local, regional and national scale related to the sustainable management of used electronic equipment. Other aims included: - to establish plans and proposals for the implementation of regulations, agreements, admini ...
Voir le projet

 3

 TERMINÉ 

European cities for integrating cycling within sustainable mobility management schemes (CycleCities)

Date du début: 31 déc. 2011, Date de fin: 30 déc. 2014,

... medium sized European cities are represented in the consortium (Lisbon, Piraeus – lead partner, London Borough of Merton, Gdansk, Leipzig, Genoa and Ljubljana), which is supported by the National Technical University of Athens, who specialises in mobility management analysis. Achieve ...
Voir le projet

 8

 TERMINÉ 

Federation for FIRE Plus (Fed4FIREplus)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2021,

The Fed4FIRE+ project has the objective to run and further improve Fed4FIRE’s “best-in-town” federation of experimentation facilities for the Future Internet Research and Experimentation initiative. Federating a heterogeneous set of facilities covering technologies ranging from wireless, wired, cloud services and open flow, and making them accessible through common frameworks and tools suddenly op ...
Voir le projet

 24

 TERMINÉ 

Infrastructure and integrated tools for personalized learning of reading skill (iRead)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

The overarching aim of the iRead project is to develop a software infrastructure of personalised, adaptive technologies and a diverse set of applications for supporting learning and teaching of reading skills. The specific goals of the project proposed are to:1. Develop a scalable, cloud-based software infrastructure of open, interoperable components, including real-time user modelling and domai ...
Voir le projet

 17

 TERMINÉ 

Smart mitigation of flow-induced acoustic radiation and transmission for reduced aircraft, surface transport, workplaces and wind energy noise (SmartAnswer)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

A step change in our noise mitigation strategies is required in order to meet the environmental targets set for a number of sectors of activity affecting people through noise exposure. Besides being a hindrance to our daily life and subject to regulations, noise emission is also a competitive issue in today’s global market. To address these issues, new technologies have been emerging recently, bas ...
Voir le projet

 13

 TERMINÉ 

Production of Scandium compounds and Scandium Aluminum alloys from European metallurgical by- products (SCALE)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2020,

Scandium (Sc) is one of the highest valued elements in the periodic table and an element which is usually grouped in REEs as it shares many characteristics with Yttrium. Scandium technological applications are unique, as it is a key component in producing Solid Oxide Fuel Cells (Scandia-Stabilized-Zirconia solid electrolyte layer) or high strength Aluminum alloys used in aerospace and 3D printing ...
Voir le projet

 20

 TERMINÉ 

Biowaste derived volatile fatty acid platform for biopolymers, bioactive compounds and chemical building blocks (VOLATILE)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2020,

VOLATILE aims in the development of an innovative Volatile Fatty Acids Platform for the bioconversion of municipal solid bio-waste fraction and sludgy biowaste from other industries. The platform will be integrated in anaerobic digestion. The volatile fatty acids will be recovered continuously using sophisticated membrane technology and will be provided as feedstock / carbon source for value added ...
Voir le projet

 21

 TERMINÉ 

SmArt BI-directional multi eNergy gAteway (SABINA)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2020,

Flexibility needs to be added to Europe’s power system to accommodate an increasing share of variable power generation from renewable sources. Indeed, service quality issues start to arise on the grid when this share in electricity consumption reaches 10%. To meet the EU’s targets for reduction of greenhouse gas emissions this share should rise to 30% by 2030 and up to 50% by 2050. The cost of thi ...
Voir le projet

 10

 TERMINÉ 

Innovative approaches to turn agricultural waste into ecological and economic assets (NoAW)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,

NoAW : No Agro-Waste.Innovative approaches to turn agricultural waste into ecological and economic assets.Driven by a “near zero-waste” society requirement, the goal of NoAW project is to generate innovative efficient approaches to convert growing agricultural waste issues into eco-efficient bio-based products opportunities with direct benefits for both environment, economy and EU consumer. To ach ...
Voir le projet

 32

 TERMINÉ 

HOLIstic optimisation of SHIP design and operation for life cycle (HOLISHIP)

Date du début: 1 sept. 2016, Date de fin: 31 août 2020,

Most maritime products are typically associated with large investments and are seldom built in large series. Where other modes of transport benefit from the economy of series production, this is not the case for maritime products which are typically designed to refined customer requirements increasingly determined by the need for high efficiency, flexibility and low environmental impact at a compe ...
Voir le projet

 39

 TERMINÉ 

Climate Proofing Urban Municipalities (LIFE UrbanProof)

Date du début: 1 oct. 2016, Date de fin: 31 mai 2020,

...ronment and its citizens have consequences for public health, water availability and quality, energy consumption and essential infrastructure. Although climate change projections have been made at national level for many countries there is not enough information available to assess climate change impacts at local level. This precludes municipalities from developing urban adaptation strategies. ...
Voir le projet

 8

 TERMINÉ 

Partnership for Research in Geopolymer Concretes (PRIGeoC)

Date du début: 1 juin 2016, Date de fin: 31 mai 2020,

Concrete, owing to its availability, easy preparation and fabrication, is the most popular construction material. However, the cement industry is facing unprecedented challenges caused by energy resources and CO2 emissions. Despite the incremental improvements in process efficiency adopted by the cement industry in recent years, OPC production is still responsible for around 6% of all man-made glo ...
Voir le projet

 3

 TERMINÉ 

Scale-up of low-carbon footprint material recovery techniques in existing wastewater treatment plants (SMART-Plant)

Date du début: 1 juin 2016, Date de fin: 31 mai 2020,

SMART-Plant will scale-up in real environment eco-innovative and energy-efficient solutions to renovate existing wastewater treatment plants and close the circular value chain by applying low-carbon techniques to recover materials that are otherwise lost. 7+2 pilot systems will be optimized fore > 2 years in real environment in 5 municipal water treatment plants, inclunding also 2 post-processing ...
Voir le projet

 27

 TERMINÉ 

Green Integrated Structural Elements for Retrofitting and New Construction of Buildings (GREEN INSTRUCT)

Date du début: 1 oct. 2016, Date de fin: 31 mars 2020,

The Green INSTRUCT project will develop a prefabricated modular structural building block that is superior to conventional precast reinforced concrete panels by virtue of its reduced weight, improved acoustic and thermal performance and multiple functionalities. The Green INSTRUCT block consists of over 70% of CDW in weight. The Green INSTRUCT project will: (i) achieve sustainability and cost sav ...
Voir le projet

 15

 TERMINÉ 

Modified cost effective fibre based structures with improved multi-functionality and performance (MODCOMP)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2020,

Current technological demands are increasingly stretching the properties of advanced materials to expand their applications to more severe or extreme conditions, whilst simultaneously seeking cost-effective production processes and final products. The aim of this project is to demonstrate the influence of different surface enhancing and modification techniques on CF-based materials for high value ...
Voir le projet

 17

 TERMINÉ 

Long Lasting Reinforced Concrete for Energy Infrastructure under Severe Operating Conditions (LORCENIS)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2020,

The main goal of the LORCENIS project is to develop long reinforced concrete for energy infrastructures with lifetime extended up to a 100% under extreme operating conditions. The concept is based on an optimal combination of novel technologies involving customized methodologies for cost-efficient operation. 4 scenarios of severe operating conditions are considered:1. Concrete infrastructure in d ...
Voir le projet

 17

 TERMINÉ 

Transforming Intangible Folkloric Performing Arts into Tangible Choreographic Digital Objects (Terpsichore)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2020,

"Intangible Cultural Heritage (ICH) content means "the practices, representations, expressions, knowledge, skills – as well as the instruments, objects, artefacts and cultural spaces associated therewith". Although, ICH content, especially traditional folklore performing arts, is commonly deemed worthy of preservation by UNESCO (Convention for the Safeguarding of ICH) and the EU Treaty, most of th ...
Voir le projet

 9

 TERMINÉ 

Optimization Driven Architectural Design of Structures (OptArch)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2020,

...ops, seminars and long-term visits will be organized at the coordinating and partner institutions. The results will be published in scientific journals, professional magazines and presented in international conferences."
Voir le projet

 12

 TERMINÉ 

Development and application of Novel, Integrated Tools for monitoring and managing Catchments (INTCATCH)

Date du début: 1 juin 2016, Date de fin: 31 janv. 2020,

INTCATCH will instigate a paradigm shift in the monitoring and management of surface water quality that is fit for global waters in the period 2020-2050. INTCATCH will do this by developing efficient, user-friendly water monitoring strategies and systems based on innovative technologies that will provide real time data for important parameters, moving towards SMART Rivers. The business model will ...
Voir le projet

 23

 TERMINÉ 

PAYT - Tool to Reduce Waste in South Europe (LIFE PAYT)

Date du début: 1 sept. 2016, Date de fin: 31 déc. 2019,

Background Municipal waste management practices are failing to achieve high recycling rates in several southern European countries, making it difficult to achieve EU targets. The Waste Framework Directive requires Member States to increase the re-use and recycling of waste materials, such as paper, metal, plastic and glass from households, to a minimum of ...
Voir le projet

 8

 TERMINÉ 

Low energy treatment technology for leachate valorisation (LIFE LEACHLESS)

Date du début: 1 oct. 2016, Date de fin: 31 déc. 2019,

...t is completed; Authorities able to increase the competitiveness and improve environmental legislation through better management of leachate; and Dissemination of the project results at national and international level through the dissemination plan and networking activities.
Voir le projet

 4

 TERMINÉ 

Achieving Complex Collaborative Missions via Decentralized Control and Coordination of Interacting Robots (Co4Robots)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

Imagine a scenario where multiple robots have been deployed to provide services such as object handling/transportation, or pickup and delivery operations. In such a context, different robots with varying capabilities must be coordinated in order to achieve various multi-tasking procedures. Thus, the effective supervision and coordination of the overall heterogeneous system mandates a decentralized ...
Voir le projet

 7

 TERMINÉ 

Up to University - Bridging the gap between schools and universities through informal education (Up2U)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

...ble after the lifetime of the project. Therefore, the project is going to develop business plans and investigate appropriate business models using the expertise of the Small Medium Enterprise and National Research and Education Network partners and their contacts with third-party business actors. Our plan is to make it easy for new schools to join the Up2U infrastructure and ecosystem that will fo ...
Voir le projet

 18

 TERMINÉ 

Novel Processes and Equipment in Composite Repair Technology (NEWCORT)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

NEWCORT will develop and validate novel processes and equipment for the repair of composite airframes. Three key stages in the bonded composite repair procedure were identified, namely material removal & surface preparation, heating for polymerization of patch and positive pressure application for improved compaction of patch layers. In all three stages novel processes will be developed, either th ...
Voir le projet

 5

 TERMINÉ 

Semantic EO Data Web Alert and Retrieval Framework (SEO-DWARF)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

Technological advances in remote sensing have increased the availability of satellite images with different spatiotemporal and spectral characteristics.There is difficulty for retrieving the most appropriate data for each user's needs.One key challenge is to connect the quantitative information of the EO images with the qualitative (high-level user queries) and be able to mine these connections in ...
Voir le projet

 10

 TERMINÉ 

Developing advanced Engine Multi-disciplinary Optimization Simulations (DEMOS) (DEMOS)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

The “Innovative Aircraft Architecture” technology stream of the Clean Sky 2 Airframe ITD focuses on advanced power-plant solutions (such as CROR and UHBR) that are able to deliver a significant gain in aircraft performance. Project DEMOS will develop advanced predictive modelling and simulation capabilities for engine design space exploration and performance optimization of such novel propulsion s ...
Voir le projet

 3

 TERMINÉ 

OpenRiskNet: Open e-Infrastructure to Support Data Sharing, Knowledge Integration and in silico Analysis and Modelling in Risk Assessment (OpenRiskNet)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2019,

Toxicology and risk assessment are undergoing a paradigm shift, from a phenomenological to a mechanistic discipline based on in vitro and in silico approaches that represent an important alternative to classical animal testing applied to the evaluation of chronic and systemic toxicity risks. Large databases and highly sophisticated methods, algorithms and tools are available for different tasks su ...
Voir le projet

 14

 TERMINÉ 

Moving towards Life Cycle Thinking by integrating Advanced Waste Management Systems (Waste4Think)

Date du début: 1 juin 2016, Date de fin: 30 nov. 2019,

The main objective of this project is to move forward the current waste management practices into a circular economy motto, demonstrating the value of integrating and validating a set of 20 eco-innovative solutions that cover all the waste value chain. The benefits of these solutions will be enhanced by a holistic waste data management methodology, and will be demonstrated in 4 complementary urban ...
Voir le projet

 19

 TERMINÉ 

High Performance Laser-based Additive Manufacturing (HIPERLAM)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,

HIPERLAM is an SME driven Research and Innovation Action (RIA) well-aligned to the Factories of the Future (FoF) Initiative with a strong emphasis upon demonstrating superior cost and speed performance in end-to-end processes featuring laser-based additive manufacturing in two key applications requiring high resolution printed conductive metallic lines, namely laser printed RFID antenna and laser ...
Voir le projet

 8