Rechercher des projets européens

29 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

CYPRES the ICS and SCADA security companion (CYPRES)

Date du début: 1 sept. 2015, Date de fin: 28 févr. 2018,

Industrial Automation and control systems are vital for city critical infrastructures which are soft targets by excellence. Awareness of their vulnerability arose since 2009 with the worm Stuxnet damaging Iranian nuclear sites. Most National Security Agencies reinforce the obligation to protect vital importance soft targets. So far, most solutions are partial and unsatisfying, and limited to Corpo ...
Voir le projet

 2

 TERMINÉ 

DIRECT REUTILIZATION OF DYE BATHS AND SELF-MONITORING OF THE PROCESS "ON LINE" (DYEING BATH REUSE)

Date du début: 1 sept. 2003, Date de fin: 31 août 2005,

... The main objectives of the project were: •To design and characterise a process for the direct reutilization of dye baths, building a trial prototype on an industrial scale that permits the automatic “on line” control of the whole dyeing processes. •To make-ready a self-monitoring system of processes “on line”, based on the application of laser s ...
Voir le projet

 1

 TERMINÉ 

Sustainable water management in the textile wet industry through an innovative treatment process for wastewater re-use (PROWATER)

Date du début: 1 oct. 2004, Date de fin: 28 févr. 2007,

.... Waste water was mixed with fresh water in other processes to generate favourable outcomes and overall the project demonstrated that fresh water consumption could be reduced by 40% on an industrial scale (Supposing 500 textile industries with a total effluent production of 1,000 m3/day, the proposed treatment system could then result in a saving of 44 million/m3 of fresh water a year). This findi ...
Voir le projet

 8

 TERMINÉ 

UP-grading of landfillgas for lowering CO2 emissions (UPGAS-LOWCO2)

Date du début: 1 janv. 2010, Date de fin: 30 juin 2012,

...ed on the chemical absorption of CO2 with an alkaline aqueous solution that produces carbonate-rich solutions. This spent solution is fed to a regeneration step, where it is mixed with alkaline industrial residues (such as fly or bottom ashes, steel slag and cement wastes), producing a sludge rich in calcium or magnesium carbonate and a regenerated alkaline solution, that is recycled to the absorp ...
Voir le projet

 5

 TERMINÉ 

Water re-born - artificial recharge: innovative technologies for the sustainable management of water resources (WARBO)

Date du début: 1 janv. 2012, Date de fin: 31 déc. 2014,

...is also a key factor. The project’s test sites were located in two main areas: two in the high Friuli Plain (north-eastern Italy) and one in the Po Valley. In the first area, one site was in the industrial zone of Ponte Rosso (Pordenone province), where a wetland receives treated industrial wastewater, and the other was in Mereto di Tomba (Udine province) and involved an innovative experimental ...
Voir le projet

 9

 TERMINÉ 

Innovative hybrid MBR-(PAC-NF) systems to promote water reuse (aWARE)

Date du début: 1 janv. 2013, Date de fin: 30 nov. 2016,

...a major concern in many arid and semi-arid countries worldwide. Increasing demand has been a major contributing factor, for reasons including continued population growth, new consumption patterns and industrial development. There are also significant supply issues, including over-dependence on single supply sources, depletion and pollution of groundwater, and hydrological and climate change. The ...
Voir le projet

 5

 TERMINÉ 

Διαχείριση Εφοδιαστικής Αλυσίδας. Σύγχρονες προσεγγίσεις με τεχνολογίες πληροφορικής και επικοινωνιών.

Date du début: 1 juin 2015, Date de fin: 31 mai 2016,

...of the school unit with 6 accompanying teachers have participated in this project. - Students of public vocational education receive training with theoretical applications that are limited within the industrial area of the school. - The curriculum does not include modern objects such as storage and logistics, the efficient operation of the warehouse and other logistics applications - They are not ...
Voir le projet

 4

 TERMINÉ 

Mesleki Becerilerin Avrupa Yoluyla Geliştirilmesi

Date du début: 1 juin 2015, Date de fin: 31 mai 2016,

...ith this project. The students from Electric-Electronics&Technologies Dept. will conduct internship activities on programmable controllers, i.e. PLC Programming Techniques that are used industrial control systems. Within the scope of this project, one of our main objectives is to understand the current developments on PLCs, which have developed as their size have got smaller since 1980s, and bui ...
Voir le projet

 4

 TERMINÉ 

Öğrencilerin Bilgisayar Destekli İmalat Becerilerinin Güçlendirilerek İşgücü Piyasasına Hazırlanması

Date du début: 1 juin 2015, Date de fin: 31 mai 2016,

...n of the machine parts cannot be carried out without the use of the computer-aided technologies. OSTIM (Middle East Industry and Trade Center) located in Ankara is the biggest small and medium-sized industrial production area with 5.000 member firms. 69% of the firms in OSTIM is active in the manufacturing sector and 62% of these firms is operating in the field of machine and metal. The enterpris ...
Voir le projet

 3

 TERMINÉ 

Harvesting energy via aligned porosity pyroelectrics (HEAPPs)

Date du début: 10 juin 2016, Date de fin: 9 juin 2018,

Energy harvesting continues to receive increasing amounts of industrial and academic interest since it provides a route for the realisation of autonomous and self-powered low-power electronic devices. Pyroelectric materials, the focus of this proposal, are of interest since under the correct conditions they have the ability to operate with a high thermodynamic efficiency for converting temperature ...
Voir le projet

 1

 TERMINÉ 

Hazard-Sensing, Network Connected Garments for Industrial Safety-Critical Environments (Hazijax)

Date du début: 1 août 2016, Date de fin: 31 oct. 2016,

...6 billion per annum by 2020. WTL’s voice of the customer surveys have identified enormous opportunities for garments which will extend functionality to network connectivity for improved safety in industrial markets. These products represent the outcome of this project. Benefits that arise from this include the ability to sense hazardous chemicals and then indicate danger not only to the garment we ...
Voir le projet

 1

 TERMINÉ 

Integrated Zero Defect Manufacturing Solution for High Value Adding Multi-stage Manufacturing systems (ForZDM)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,

...quires innovative defect management and control methods, novel technologies for in-line inspection and integration of knowledge management and ICT tools for smart and sustainable decisions in complex industrial scenarios, which are not available in the market. The aim of the ForZDM project is to develop and demonstrate tools to support the rapid deployment of ZDM solutions in industry and design m ...
Voir le projet

 13

 TERMINÉ 

Development and Pilot Line Validation of a Modular re-configurable Laser Process Head (ModuLase)

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

State-of-the-art fibre-delivered laser sources are an industrially accepted tool for performing a range of materials processing applications. Despite the unrivalled capability of fibre-delivered laser sources to perform a wide range of processes, the potential flexibility of the laser source is limited by the need to change the processing head for these processes to be performed. The majority of i ...
Voir le projet

 8

 TERMINÉ 

Data-driven Modelling in Dynamic Networks (SYSDYNET)

Date du début: 1 sept. 2016, Date de fin: 31 août 2021,

.... The accuracy of the models is key to their subsequent use in model-based operations. With the growing spatial complexity of engineering systems, e.g., in power networks, transportation networks and industrial production systems, also referred to as cyber-physical systems of systems, there is a strong need for effective modelling tools for dynamic networks, being considered as interconnected dyna ...
Voir le projet

 1

 TERMINÉ 

SEISMIC ENGINEERING RESEARCH INFRASTRUCTURES FOR EUROPEAN SYNERGIES (SERIES)

Date du début: 1 mars 2009, Date de fin: 31 juil. 2013,

...em by the S/T community of earthquake engineering, especially that of Europe’s most seismic regions. A 23-strong Consortium of the key actors in Europe’s seismic engineering research (including 3 industrial partners) addresses these problems in a sustainable way via a 4-year programme of activities at an annual cost to the Commission less than 1.35% of the total present value (€190m) of the RIs’ m ...
Voir le projet

 23

 TERMINÉ 

Control of Triboelectricity from Micro to Macro as a Principle ofSticking, Particulate Contamination and ESD Prevention of Micromachines (Tribocharge)

Date du début: 1 mars 2016, Date de fin: 28 févr. 2018,

...frictional electricity), which has been overlooked so far. Tribocharging is a very common event causing value losses due to electrostatic sticking and electrostatic discharging (ESD) problems in many industrial manufacturing processes such as static cling of powder materials in drug processing, ESD problems in electronics. Attempts to eliminate static electricity from solid and liquid materials i ...
Voir le projet

 1

 TERMINÉ 

Milk Powder for Enhancing Probiotic PERformance (Milk PEPPER)

Date du début: 10 janv. 2015, Date de fin: 9 févr. 2017,

...ality. This implies an in-depth study of interactions between milk components and LGG, based on the development of new methodologies to characterize the bacterial location within the structure. The industrial objectives are to optimize and control the processes to suit industrial needs: encapsulation efficiency, stability during processing and storage, gastric resistance, intestinal release.
Voir le projet

 1

 TERMINÉ 

Ultra Dynamic Optical Systems for High Throughput Laser Surface Processing (ultraSURFACE)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2018,

In nearly every sector of industrial manufacturing surface processing techniques are used, e.g. for structuring or polishing of aesthetical or functional surfaces. In many applications laser based surface processing techniques already achieve highest precision and quality. But often the throughput is limited.State of the art for many applications in laser surface processing is the utilization of o ...
Voir le projet

 10

 TERMINÉ 

KiWi Power Limited’s Revolutionary, Low Cost, Demand Response Platform (KDRP) (KDRP)

Date du début: 1 mars 2015, Date de fin: 30 juin 2015,

...ty; flexibility & remote monitoring, forecasting model - for integration of renewables; & optimisation engine - to max. revenues.END USERS: [1] Initial target = large scale commercial & industrial (C&I) orgs with high MW capacity (>1MW) e.g. financial, telecoms, hospitals, hotels etc. Asset types: DRUPS systems & HVAC. [2] Secondary target = SMEs with low MW capacity (50kW< capacity < 1MW) incl. ...
Voir le projet

 1

 TERMINÉ 

Wireless devices for smart energy management systems (MICROBAT)

Date du début: 1 mai 2015, Date de fin: 31 oct. 2015,

There is a growing need for smart energy-efficient homes, offices and industrial plants, and this need is increasingly being supported by legislation. Hence there is a growing market for technologies to enable this, through the deployment of smart metering as well as intelligent heating, ventilation, lighting, and monitoring control systems. To address this market, a new class of low-power wirel ...
Voir le projet

 1

 TERMINÉ 

Airborne Wind Energy System Modelling, Control and Optimisation (AWESCO)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2018,

...odically pulling a ground based generator via a winch, or by small wind turbines mounted on the kite that exploit its fast cross wind motion. While the concept is highly promising, major academic and industrial research is still needed to achieve the performance required for industrial deployment. This can best be done by innovative junior researchers in a closely cooperating consortium of academi ...
Voir le projet

 10

 TERMINÉ 

Trusted Apps for open CPS (TAPPS)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2017,

...in for trusted application development including verification tools. This multi-level trusted Apps platform and tool chain are matured and validated in health and automotive application domains using industrial, realistic use cases paving the way for future exploitation in further demanding application domains.
Voir le projet

 9

 TERMINÉ 

Holistic Human Factors and System Design of Adaptive Cooperative Human-Machine Systems (HOLIDES)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2016,

... and Automotive market is still sadly limited. The development and especially the qualification and certification of AdCoS in-volving several interactive Embedded Systems are not yet well-mastered in industrial develop-ment. The lack of adequate means of compliance with human factors and safety regulations may force the designers to simplify systems in order to make them certifiable. This clearly ...
Voir le projet

 32

 TERMINÉ 

Reducing Internet Transport Latency (RITE)

Date du début: 1 nov. 2012, Date de fin: 30 nov. 2015,

...ly delivery. Applications that need low latency currently require a dedicated network and/or operator traffic engineering. In response to this, RITE brings together a consortium with the research and industrial experience required to locate and explore the root causes of Internet latency. Research will specify and implement new methods to significantly reduce - or even eliminate - the effects of l ...
Voir le projet

 9

 TERMINÉ 

Advanced Autonomous Model-Based Operation of Industrial Process Systems (Autoprofit)

Date du début: 1 oct. 2010, Date de fin: 31 déc. 2013,

This project aims at improving the operational efficiency of large-scale dynamic plants as found in petrochemical, chemical and other process industries. Costs related with industrial implementation of current model-based operation support systems, like Model Predictive Control, Real-Time Optimization and soft-sensors for these complex processes are currently very high. Moreover it is widely recog ...
Voir le projet

 7

 TERMINÉ 

FLEXIBLE PRODUCTION TECHNOLOGIES AND EQUIPMENT BASED ON ATMOSPHERIC PRESSURE PLASMA PROCESSING FOR 3D NANO STRUCTURED SURFACES (N2P)

Date du début: 1 juin 2008, Date de fin: 30 nov. 2012,

...present high market value segments: photovoltaics, aeronautics, automotive, steel. The consortium includes 7 technology leading SMEs and 4 multi-national industries, cooperating with 9 institutes for industrial research and a public body from 8 European countries.
Voir le projet

 22

 TERMINÉ 

"Development of an automatic process of in-house collection, storage and application of adaptive bacteria culture for fish farms." (ADAPOND)

Date du début: 1 sept. 2008, Date de fin: 28 févr. 2011,

...-up and recovery processes in fish farm are slow, taking 3-6 weeks. (b) Methods of bacteria extraction and storage are designed for usage in laboratory and not providing the efficiency required for industrial applications; (c) Limited knowledge about how is the recovery performance of recultivated bacteria related to the health before collection; (d) Existing methods to assess the viability and me ...
Voir le projet

 13

 TERMINÉ 

Reduction in Maintenance Costs of Wind Turbine Renewable Electricity Generation through Online Condition Monitoring (MONITUR)

Date du début: 1 janv. 2013, Date de fin: 31 déc. 2014,

To achieve the EC binding targets of 20% electricity generation from renewables by 2020 will require between 600 and 833 TWh to be produced by wind power which will require between 119,000 to 165,000 new turbines. According to the European Wind Energy Technology Platform publication “O&M strategies are based on periodic inspection; fault statistics from existing stock is either unavailable or insu ...
Voir le projet

 8

 TERMINÉ 

Distributed Control of Large-Scale Offshore Wind Farms project proposal (Aeolus)

Date du début: 1 mai 2008, Date de fin: 30 sept. 2011,

...o address objectives related to cost, quality of power and mechanical loads, models and control paradigms must be developed that allow wind resource allocation to individual turbines. Inspired by the industrial case of complex large-scale distributed offshore wind farms, the Aeolus project will research and develop models that allow real-time predictions of flows and incorporate measurements from ...
Voir le projet

 6