Rechercher des projets européens

17 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Energy for Smart Objects (EnSO)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

The goal of EnSO is to develop and consolidate a unique European ecosystem in the field of autonomous micro energy sources (AMES) supporting Electronic European industry to develop innovative products, in particular in IoT markets. In summary, EnSO multi-KET objectives are:• Objective 1: demonstrate the competitiveness of EnSO energy solutions of the targeted Smart Society, Smart Health, and Smart ...
Voir le projet

 36

 TERMINÉ 

Tidal Turbine Power Take-Off Accelerator (TIPA)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,

...l uses outside the tidal sector, such as wave power and marine propulsion.The project is led by Nova Innovation, a world-leading tidal energy technology and project developer. Project partners are: SKF, Siemens, The University of Edinburgh, Delft Technical University, Wood Group and the Center for Wind Power Drives RWTH Aachen University.This proposal is being submitted to the call LCE-07-2016-201 ...
Voir le projet

 7

 TERMINÉ 

Floating Tidal Energy Commercialisation project (FloTEC) (FloTEC)

Date du début: 1 janv. 2016, Date de fin: 30 juin 2019,

The FloTEC project will demonstrate the potential for floating tidal stream turbines to provide low-cost, high-value energy to the European grid mix. The FloTEC project has 5 core objectives:1. Demonstrate a full-scale prototype floating tidal energy generation system for optimised energy extraction in locally varying tidal resources;2. Reduce the Levelised Cost of Energy of floating tidal energy ...
Voir le projet

 9

 TERMINÉ 

INNOVATIVE ENGINEERING OF GROUND VEHICLES WITH INTEGRATED ACTIVE CHASSIS SYSTEMS (EVE)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2017,

Innovation technologies in ground vehicle engineering require strong interdisciplinary and intersectoral investigations with an international dimension. In this context the project EVE proposes sustainable approach based on intensive staff exchange that leads to collaborative research and training between universities and industrial organizations from Germany, Belgium, Spain, Sweden, The Netherlan ...
Voir le projet

 11

 TERMINÉ 

Hub of Application Laboratories for Equipment Assessment in Laser Based Manufacturing (APPOLO)

Date du début: 1 sept. 2013, Date de fin: 31 août 2017,

During more than 50 years of the laser existence, they have been proved as the unique tool for diverse material processing application. New application ideas, coming from universities and research institutions, are usually implemented by spin-off companies with limited resources for market penetration. Research laboratories are using universal laser tools, while effective and low-cost production r ...
Voir le projet

 36

 TERMINÉ 

Continous improvements in an added value chain

Date du début: 1 juin 2015, Date de fin: 31 mai 2017,

Participants are teacher, supervisors and prospective operators in the industrial sector. They study on secondary courses related to SKF Sweden AB,Perstrop AB, Volvo Cars and Volvo Trucks. The participants follow designed upper secondary programs with a technical profile. The participants need expertise in several special areas such as: maintenance, grinding technology, steering techniques, etc. ...
Voir le projet

 15

 TERMINÉ 

Arrowhead (ARROWHEAD)

Date du début: 1 mars 2013, Date de fin: 28 févr. 2017,

"Our society is facing both energy and competitiveness challenges. These challenges are tightly linked and require new dynamic interactions between energy producers and energy consumers, between machines, between systems, between people and systems, etc. Cooperative automation is the key for these dynamic interactions and is enabled by the technology developed around the Internet of Things and Ser ...
Voir le projet

 87

 TERMINÉ 

"Self healing innovative elastomers for dynamic seals, damping and noise reduction" (SHINE)

Date du début: 1 févr. 2013, Date de fin: 31 juil. 2016,

"Overall objective of the SHINE project is to develop a novel generation of elastomers that undergo spontaneous self-healing, leading to enhanced durability and reliability of the products made thereof (dynamic seals, shock absorbers, anti-vibration devices for vehicles, roads, railroads and bridges). The elastomers can heal without human intervention and can undergo multiple healing stages. They ...
Voir le projet

 12

 TERMINÉ 

COmplete Vehicle Energy-saving Technologies for Heavy-Trucks (CONVENIENT)

Date du début: 1 nov. 2012, Date de fin: 30 avr. 2016,

The CONVENIENT project targets a 30% reduction of fuel consumption in vehicles for long-distance freight transport by developing an innovative heavy-truck archetype featuring a suite of innovative energy-saving technologies and solutions.From the customer viewpoint, fuel efficiency is top priority because of its significant impact in terms of cost (in the EU, fuel represents about 30% of the Total ...
Voir le projet

 23

 TERMINÉ 

ACTUATION 2015: Modular Electro Mechanical Actuators for ACARE 2020 Aircraft and Helicopters (ACTUATION2015)

Date du début: 1 nov. 2011, Date de fin: 30 avr. 2016,

The All-Electric Aircraft is a major target for the next generation of aircraft to lower consumption of non-propulsive power and thus fuel burn. To eliminate hydraulic circuits, pumps and reservoirs, Electro Mechanical Actuators (EMA) are mandatory but now need to meet cost, reliability and weight requirements from the airframers.ACTUATION2015 aims to develop and validate a common set of standard ...
Voir le projet

 56

 TERMINÉ 

Engineering Tribochemistry and Interfaces with a Focus on the Internal Combustion Engine (ENTICE)

Date du début: 1 févr. 2012, Date de fin: 31 janv. 2016,

The main aim of the ENTICE proposal is to provide professional development in the multidisciplinary field of ENgineering Tribochemistry and Interfaces for IC Engines, capable to develop the new generation of clean and energy-efficient engines. It aims to train the next generation of researchers to work in diverse teams, to cross disciplinary and sectoral boundaries and apply advanced communicatio ...
Voir le projet

 9

 TERMINÉ 

Product Remanufacturing Service System (PREMANUS)

Date du début: 1 sept. 2011, Date de fin: 30 juin 2015,

For centuries mankind has attempted to exploit the resources available to it through the reuse of objects and artifacts. However, as wealth of modern man has grown, the financial necessity to utilize the lifetime of these objects has dramatically declined, especially in developed countries with high focus on manufacturing. The demand for new products also placed undue pressure on the world's res ...
Voir le projet

 13

 TERMINÉ 

Multiscale Modelling of Hydrogen Embrittlement (MultiHy)

Date du début: 1 mai 2011, Date de fin: 30 avr. 2015,

The proposed project aims to advance the state-of-the-art of numerical modelling of hydrogen embrittlement (HE). The primary focus and novelty of the project is the description of H transport in modern advanced materials with complex microstructures. This goal will be achieved through development of a multiscale modelling framework, which will enable the extraction and propagation of information p ...
Voir le projet

 12

 TERMINÉ 

Simulation Platform for Non Destructive Evaluation of Structures and Materials (SIMPOSIUM)

Date du début: 1 sept. 2011, Date de fin: 31 déc. 2014,

In all industrial sectors, Non Destructive Evaluation techniques play a critical role for ensuring structures reliability, plant safety and increasingly also for ensuring quality and efficiency of products and processes. The emerging use of numerical simulation is a major trend in the field with tremendous potential benefits in terms of costs reduction, enhanced diagnosis reliability and consequen ...
Voir le projet

 20

 TERMINÉ 

Enhanced reliability and lifetime of ceramic components through multiscale modelling of degradation and damage (RoLiCer)

Date du début: 1 déc. 2011, Date de fin: 30 nov. 2014,

Engineering ceramics possess superior mechanical and physical properties. The exceptional wear, corrosion and contact fatigue resistance of silicon nitride and SiAlON ceramics makes them attractive materials for high temperature metalforming tools and rolling elements for bearings. Despite the efforts devoted to study this class of materials, there still exists a gap between their microstructural ...
Voir le projet

 7

 TERMINÉ 

SUPERSONIC DEPOSITION OF NANOSTRUCTURED SURFACES (SUPERSONIC)

Date du début: 1 déc. 2009, Date de fin: 30 nov. 2013,

"The basic scientific and technological concept of the project is to use agglomerated nanophased powders to be transferred onto a substrate in the form a coating with very little or none change of crystal structure. This will allow to obtain nano-structured coatings with a crystal size very close to the powder one. The concept will be extended to an important breakthrough concept that is the “Sup ...
Voir le projet

 12

 TERMINÉ 

"Reliability focused research on optimizing Wind Energy systems design, operation and maintenance: Tools, proof of concepts, guidelines & methodologies for a new generation." (RELIAWIND)

Date du début: 15 mars 2008, Date de fin: 14 mars 2011,

"The EU Council of Ministers held 8 & 9th march 2007 examined theses issues and agreed: “Renewable energy will cover at least 20 % of the EU’s energy demand by 2020”, amongst others. Wind power can make the most important contribution to these targets, if sufficient emphasis is established on technological R&D and market development. Because of the current European scenario and its forecasted evol ...
Voir le projet

 11