Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

A.dditive MA.nufacturing for T.iltrotor HO.using (AMATHO)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2021,

AMATHO (A.dditive MA.nufacturing T.iltrotor HO.using) is aimed to design, assess and manufacture a novel tiltrotor drive system housing exploiting the features of additive manufacturing techniques. Preliminarily, functional, structural and technological peculiarities of rotorcraft main gearbox housings are analysed and relevant requirements are issued. In the meantime, viable AM processes are revi ...
Voir le projet

 3

 TERMINÉ 

Advanced direct biogas fuel processor for robust and cost-effective decentralised hydrogenproduction (BIOROBURplus)

Date du début: 1 janv. 2017, Date de fin: 30 juin 2020,

BioROBURplus builds upon the closing FCH JU BioROBUR project (direct biogas oxidative steam reformer) to develop an entire pre-commercial fuel processor delivering 50 Nm3/h (i.e. 107 kg/d) of 99.9% hydrogen from different biogas types (landfill gas, anaerobic digestion of organic wastes, anaerobic digestion of wastewater-treatment sludges) in a cost-effective manner.The energy efficiency of biogas ...
Voir le projet

 11

 TERMINÉ 

Intuitive Natural Prosthesis UTilization (INPUT)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2020,

"INPUT will strive to make the control of complex upper limb prostheses simple, natural and to be used on a daily basis by amputees effortlessly after donning -"don and play". Currently, the most advanced routine prosthetic control on the market is more than 4 decades old, outdated and constitutes the bottle neck to introducing highly dexterous prostheses. The project builds on achievements reache ...
Voir le projet

 7

 TERMINÉ 

Novel ALL-IN-ONE machines, robots and systems for affordable, worldwide and lifetime Distributed 3D hybrid manufacturing and repair operations (4D hybrid)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

From aeronautics to oil&gas, complex metal parts embrace major challenges across their lifecycles from the green field intensive manufacturing to the numerous maintenance and repairing operations worldwide distributed. The synergic combination of additive and subtractive processes could overcome individual shortcomings, going beyond the simple succession of steps. 'Plug and produce' modular approa ...
Voir le projet

 20

 TERMINÉ 

Collaborative Recommendations and Adaptive Control for Personalised Energy Saving (enCOMPASS)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,

Achieving the European environmental objectives for 2020 requires not only technological progress, but also a major change in energy consumption behaviour. The enCOMPASS project will implement and validate an integrated socio-technical approach to behavioural change for energy saving, by developing innovative user-friendly digital tools to make energy consumption data available and understandable ...
Voir le projet

 14

 TERMINÉ 

Factory Automation Edge Computing Operating System Reference Implementation (FAR-EDGE)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

Despite the proclaimed benefits (i.e. scalability, reliability, cost-effectiveness) of Future Internet (FI) technologies (i.e. edge & cloud computing, IoT/CPS) for factory automation, their adoption from manufacturers remains low for various reasons, including technology issues (e.g., poor situation awareness, limited deployments, no standards-based reference implementations) and the lack of a smo ...
Voir le projet

 12

 TERMINÉ 

HUman MANufacturing (HUMAN)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

EU manufacturers are increasingly adopting automation solutions that can improve productivity and reduce costs.Enterprises’ ability to utilize these technologies may be their single most important competitive advantage, and the specific skills, experiences, competences,and flexibility of workers are pivotal to and at the core of this ability.To create a healthy workplace and increase the competiti ...
Voir le projet

 12

 TERMINÉ 

Distributed control and simulAtion platform to support an Ecosystem of DigitAL aUtomation developerS (Daedalus)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

Daedalus is conceived to enable the full exploitation of the CPS concept of virtualized intelligence, through the adoption of a completely distributed automation platform based on IEC-61499 standard, fostering the creation of a Digital Ecosystem that could go beyond the current limits of manufacturing control systems and propose an ever-growing market of innovative solutions for the design, engine ...
Voir le projet

 14

 TERMINÉ 

CHEAP AND EFFICIENT APPLICATION OF RELIABLE GROUND SOURCE HEAT EXCHANGERS AND PUMPS (Cheap-GSHPs)

Date du début: 1 juin 2015, Date de fin: 31 mai 2019,

To reduce the total cost of low enthalpy geothermal systems by 20-30 % the project will improve actual drilling/installation technologies and designs of Ground Source Heat Exchangers (GSHE’s). This will be combined with an holistic approach for optimum selection, design and implementation of complete systems across different underground and climate conditions. The proposal will focus on one hand ...
Voir le projet

 17

 TERMINÉ 

Incubate a New Learning and Inspiration Framework for Education (INLIFE)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2018,

INLIFE will provide an innovative gamification framework targeting both typical as well as special education and social inclusion activities based on Serious Games. INLIFE’s core concept leverages on the potential of the Internet-of-Things (IoT) paradigm to directly link actions, decisions and events happening in real-life with in-game educational progress and modern gaming technologies. This brid ...
Voir le projet

 7

 TERMINÉ 

Multi-disciplinArY integrated simulAtion and forecasting tools, empowered by digital continuity and continuous real-world synchronization, towards reduced time to production and optimization (MAYA)

Date du début: 1 oct. 2015, Date de fin: 30 sept. 2018,

MAYA aims at developing simulation methodologies and multidisciplinary tools for the design, engineering and management of CPS-based (Cyber Physical Systems) Factories, in order to strategically support production-related activities during all the phases of the factory life-cycle, from the integrated design of the product-process- production system, through the optimization of the running factory, ...
Voir le projet

 11

 TERMINÉ 

SYMBIONICA - Reconfigurable Machine for the new Additive and Subtractive Manufacturing of next generation fully personalized bionics and smart prosthetics (Symbionica)

Date du début: 1 oct. 2015, Date de fin: 30 sept. 2018,

Medtech products belongs to a huge expanding market, in which Europe hosts some of the biggest global player, accounting for 30% of the world market and for more than 575,000 people employed by nearly 25,000 medical technology companies – 95% of which are SMEs.Symbionica project focuses on the manufacturing of personalized bionics, smart endoprosthetics and exo-prosthetics that require geometric a ...
Voir le projet

 12

 TERMINÉ 

Human-mimetic approach to the integrated monitoring, management and optimization of a symbiotic cluster of smart production units (SYMBIOPTIMA)

Date du début: 1 sept. 2015, Date de fin: 31 août 2018,

Improvements of the overall sustainability of process industries from an economic, environmental and social point of view require the adoption of a new industrial symbiosis paradigm - the human-mimetic symbiosis - where critical resources (materials, energy, waste and by-products) are coordinated among multiple autonomous Production Units organized in industrial clusters.SYMBIOPTIMA will improve E ...
Voir le projet

 15

 TERMINÉ 

Movement Assisting Devices: Manufacturing of personalized Kineto-Dynamics parts and products for workers, elderly and children (MovAiD)

Date du début: 1 sept. 2015, Date de fin: 31 août 2018,

I - Over forty million workers in the EU are affected by work-place related musculoskeletal disorders, as a result of working in painful or tiring positions and handling heavy loads with repetitive hand or arm movements.II - The aging population is growing fast and approaching the mean age where loss of function and hence loss of mobility is to begin. In addition to diabetic and obesity, in 5 year ...
Voir le projet

 13

 TERMINÉ 

Open social transport network for urban approach to carpooling (SocialCar)

Date du début: 1 juin 2015, Date de fin: 31 mai 2018,

SocialCar is an Intelligent Transport System based on an innovative approach to transport demand management, and more specifically to carpooling in urban and peri-urban areas. SocialCar’s main objective is devopping a new communication network for intelligent mobility, sharing information of car-pooling integrated with existing transport and mobility systems. It will be achieved by means of powerf ...
Voir le projet

 28

 TERMINÉ 

Borealis – the 3A energy class Flexible Machine for the new Additive and Subtractive Manufacturing on next generation of complex 3D metal parts. (BOREALIS)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2017,

Borealis project presents an advanced concept of machine for powder deposition additive manufacturing and ablation processes that integrates 5 AM technologies in a unique solution. The machine is characterized by a redundant structures constituted by a large portal and a small PKM enabling the covering of a large range of working cube and a pattern of ejective nozzles and hybrid laser source targe ...
Voir le projet

 16

 TERMINÉ 

FREE and open source software tools for WATer resource management (FREEWAT)

Date du début: 1 avr. 2015, Date de fin: 30 sept. 2017,

"FREEWAT aims at promoting water management and planning by simplifying the application of the Water Framework Directive and other EU water related Directives. FREEWAT will be an open source and public domain GIS integrated modelling environment for the simulation of water quantity and quality in surface water and groundwater with an integrated water management and planning module.Specific objecti ...
Voir le projet

 20

 TERMINÉ 

Virtual Prototyping of Tactile Displays (PROTOTOUCH)

Date du début: 1 mai 2013, Date de fin: 30 avr. 2017,

"It is estimated that touch screen module revenues will reach $23.9 billion by 2017. These user interfaces have become one of the most common input devices for digital media, e.g. in mobile phones and computers. Current devices incorporate relatively primitive vibrotactile haptic-feedback. The aim of PROTOTOUCH is to develop tactile displays with high fidelity haptic recognition, so that buttons w ...
Voir le projet

 10

 TERMINÉ 

Digital Social Innovation for Europe (DSI4EU)

Date du début: 1 févr. 2016, Date de fin: 31 mars 2017,

The DSI4EU project will support, grow and scale the current Digital Social Innovation network of projects and organisations, bringing together social entrepreneurs, hackers, communities and academics working on key DSI fields such as the makers movement, the collaborative economy, open democracy and digital rights.DSI4EU will foster digital innovations for the social good, helping communities shar ...
Voir le projet

 4

 TERMINÉ 

SmartH2O: an ICT Platform to leverage on Social Computing for the efficient management of Water Consumption (SmartH2O)

Date du début: 1 avr. 2014, Date de fin: 31 mars 2017,

Description SmartH2O: an ICT Platform to leverage on Social Computing for the efficient management of Water Consumption  The SmartH2O project develops an ICT platform for improving the management of urban and peri-urban water demand thanks to the integrated use of smart meters, social computation, ...
Voir le projet

 12

 TERMINÉ 

European Roadmap for Cyber-Physical Systems in Manufacturing (sCorPiuS)

Date du début: 1 févr. 2015, Date de fin: 31 janv. 2017,

The worldwide economic downturn forces the Western companies to cut costs and enhances the performances of their processes in order to maintain the European leadership and excellence in manufacturing. Effectively, European businesses cannot compete anymore on workforce costs with Eastern countries: as a result the manufacturers have to leverage on more sustainable and efficient production systems. ...
Voir le projet

 6

 TERMINÉ 

Constructing buildings with customizable size PV modules integrated in the opaque part of the building skin (CONSTRUCT-PV)

Date du début: 1 févr. 2013, Date de fin: 31 janv. 2017,

Construct-PV will develop and demonstrate customizable, efficient, and low cost BIPV for opaque surfaces of buildings. Opaque surfaces are selected because they represent massive wide-area spaces of untapped harvesting potential across Europe. To develop highly efficient systems, most promising PV technologies have been selected, i.e. back contact cells fabricated with MWT technology, extensively ...
Voir le projet

 12

 TERMINÉ 

New Approaches to Network Design (NEWNET)

Date du début: 1 janv. 2012, Date de fin: 31 déc. 2016,

"Networks pervade every aspect of nowadays life. This is one of the reasons why their design, management, and analysis is one of the most active areas of theoretical and empirical research in Computer Science and Operations Research. The main goal of this project is to increase our theoretical understanding of networks, with a special focus on faster exact exponential-time algorithms and more accu ...
Voir le projet

 2

 TERMINÉ 

Computational Cloud Services and Workflows for Agile Engineering (CloudFlow)

Date du début: 1 juil. 2013, Date de fin: 31 déc. 2016,

Traditionally, the European manufacturing industry is characterized by innovative technology, quality processes and robust products which have leveraged Europe's industrialization. However, globalization has exposed Europe's industry to new emerging and industrialized manufacturing markets and the current economic challenges have decelerated the internal boost and investment, respectively. Hence, ...
Voir le projet

 29

 TERMINÉ 

ADvanced Digital technologies and virtual engineering for mini-Factories (ADDFACTOR)

Date du début: 1 sept. 2013, Date de fin: 31 déc. 2016,

In today globalized world, companies are trying to remain competitive through the adoption of a strategy where high quantity production of goods is the leverage to reduce costs.By negating this approach, ADDFactor proposes the “Mini-factories” concept, which is conceived to be an innovative solution for most of the actors involved in the whole supply chain: the relationship between retailers and t ...
Voir le projet

 16

 TERMINÉ 

Demonstration at industrial scale of the FLeXible manufacturing of SMART multifunctional photovoltaic building elements (SMART-FLEX)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2016,

Building integrated photovoltaics (BIPV) is a promising area while it is still considered as a novelty dedicated only to exclusive construction. However, BIPV potential is much greater and many more solutions could be developed and BIPV could become a broadly accepted technology if the main barriers, hindering the market deployment are overcome.SMART-FLeX consortium aims to address the identified ...
Voir le projet

 8

 TERMINÉ 

MANufacturing through ergonoMic and safe Anthropocentric aDaptive workplacEs for context aware factories in EUROPE (MAN-MADE)

Date du début: 1 sept. 2013, Date de fin: 31 août 2016,

"The MAN-MADE project aims at defining new socially sustainable workplaces where the human dimension is a key cornerstone. Workers are foreseen at the centre of the factory, on the one hand, in terms of workplace adaptation (and production planning, at large) to skills, expertise and characteristic of each single worker and, on the other hand, in terms of capability to make the most out of worker’ ...
Voir le projet

 9

 TERMINÉ 

white room based on Reconfigurable robotic Island for optoelectronics (whiteR)

Date du début: 1 sept. 2013, Date de fin: 31 août 2016,

The young optoelectronic industry has critical mass and already impacts for more than the 10% on the European economy, employing 290 000 people and guarantees a stable double digit growth in current and coming years. Europe is playing a leading role in R&D (>1,000 research organization active) and is still able to face Far East and American competitors in manufacturing. white’R is a necessary acti ...
Voir le projet

 13

 TERMINÉ 

Biogas robust processing with combined catalytic reformer and trap (BioRobur)

Date du début: 1 mai 2013, Date de fin: 31 août 2016,

In the BioROBUR project a robust and efficient fuel processor for the direct reforming of biogas will be developed and tested at a scale equivalent to 50 Nm3/h production of PEM-grade hydrogen to demonstrate the achievement of all the call mandates. The system energy efficiency of biogas conversion into hydrogen will be 65%, for a reference biogas composition of 60%vol CH4 and 40%vol CO2.Key innov ...
Voir le projet

 9

 TERMINÉ 

Advanced Material Textile for Reinforced Structures for Complex Lightweight Applications (MADMAX)

Date du début: 1 août 2013, Date de fin: 31 juil. 2016,

"The objective of this project is to regroup a cluster of private and academic laboratories supported by key manufacturers from both aeronautic, automotive and railway sectors in order to investigate the possibility to benchmark specific composites :• from the aeronautics. Depending on the application targeted, the cluster will be able to take advantage of the mutual return on experiment in order ...
Voir le projet

 19

 TERMINÉ 

Local flexible manufacturing of green personalized furniture Close To the Customer in time, space and cost (CTC)

Date du début: 1 juin 2013, Date de fin: 31 mai 2016,

"The CTC project aims to support European Industry to adapt to global competitive pressures by developing methods and innovative enabling technologies towards local flexible manufacturing of green personalized products close to the customer in terms of features offered, place of fabrication, time to deliver, and cost. This vision is implemented and demonstrated within an European industrial sector ...
Voir le projet

 10

 TERMINÉ 

Development of the CYBER crime and CYBER terrorism reseach ROADmap (CYBERROAD)

Date du début: 1 juin 2014, Date de fin: 31 mai 2016,

This project will identify current and future issues in the fight against Cyber crime and cyber terrorism in order to draw a roadmap for cyber security research. A detailed snapshot of the technological, social, economic, political, and legal scenario on which cyber crime and cyber terrorism do develop will be first provided. Then, cyber crime and cyber terrorism will be studied, in order to inde ...
Voir le projet

 22

 TERMINÉ 

High-frequency ELectro-Magnetic technologies for advanced processing of ceramic matrix composites and graphite expansion (HELM)

Date du début: 1 juin 2012, Date de fin: 31 mai 2016,

"Lightweight ceramics and fibre reinforced ceramic composites, such as non-oxide Ceramic Matrix Composites (CMCs) and Expanded Graphite (EG), represent very promising solutions for high temperature applications in strategic industrial sectors, such as transport and energy. In fact, these materials are one of topical priorities of the European Technology Platform EuMAT and a strategic issue of the ...
Voir le projet

 21

 TERMINÉ 

INNOVATIVE THERMAL MANAGEMENT CONCEPTS FOR THERMAL PROTECTION OF FUTURE SPACE VEHICLES (THOR)

Date du début: 1 janv. 2013, Date de fin: 31 déc. 2015,

There are key space technologies existing at European level and during the last space calls many European projects are framed on space re-entry, but none of them dealing with radically new technologies, able to compete with technologies from other leading countries or allowing collaboration with them. The THOR project will provide knowledge in key space technologies for accessing space, through th ...
Voir le projet

 9

 TERMINÉ 

NAnoSCale Engineering for Novel Computation using Evolution (NASCENCE) (NASCENCE)

Date du début: 1 nov. 2012, Date de fin: 31 oct. 2015,

The aim of this project is to model, understand and exploit the behaviour of evolving nanosystems (e.g. networks of nanoparticles, carbon nanotubes or films of graphene) with the long term goal to build information processing devices exploiting these architectures without reproducing individual components. With an interface to a conventional digital computer we will use computer controlled manipul ...
Voir le projet

 5

 TERMINÉ 

Tools for Enhanced Photovoltaic System Performance (PERFORMANCE PLUS)

Date du début: 1 nov. 2012, Date de fin: 31 oct. 2015,

For a continued decrease of levelised costs of energy from photovoltaics (PV), the prices of PV system components have to be further decreased while performance, functionality, reliability and lifetime on the component and system level need to be increased. In an integrated view, PV system performance emerges from, but is not limited to the performance of the components. The Performance Plus proje ...
Voir le projet

 9

 TERMINÉ 

Factory ECO-friendly and energy efficient technologies and adaptive autoMATION solutions (FACTORY-ECOMATION)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2015,

The production landscape is changing. Traditionally, energy costs represented a small part of the production expenses, meaning that the design of production facilities usually neglected efficient energy usage in favour of maximization of production throughput; the energy consumption of factories has been always high, but energy cost has increased dramatically in the last decades, pushing industria ...
Voir le projet

 12

 TERMINÉ 

EXPLORE - EXTENDED EXPLOITATION OF EUROPEAN RESEARCH PROJECTS’ KNOWLEDGE AND RESULTS (EXPLORE)

Date du début: 1 sept. 2013, Date de fin: 31 août 2015,

The European Manufacturing Industry competitiveness and sustainability strongly depends on Innovation, targeting new consumer needs and societal challenges. This calls for significant public and private investments in R&D, but also a growing capability to transform the created knowledge into new products, processes, services and business models.Many of these challenges are multi-sectorial as the t ...
Voir le projet

 14

 TERMINÉ 

Development and scale-up of nanostructured based materials and processes for low cost high efficiency chalcogenide based photovoltaics (SCALENANO)

Date du début: 1 févr. 2012, Date de fin: 31 juil. 2015,

This project will exploit the potential of chalcogenide based thin film photovoltaic technologies for the development and scale-up of new processes based on nanostructured materials for the production of high efficiency and low cost photovoltaic devices and modules compatible with mass production requirements. Cu(In,Ga)(S,Se)2 (CIGS) chalcogenide based devices have the highest efficiency of all th ...
Voir le projet

 14

 TERMINÉ 

Wearable interfaces for hAnd function recoverY (WAY)

Date du début: 1 oct. 2011, Date de fin: 31 mai 2015,

This project addresses the scientific problem of recovery of hand function after amputation, or neurological disabilities like spinal cord injury, brachial plexus injury, and stroke. It introduces several conceptual novelties which explicitly take into account and overcome the limited band-width in actual Brain-Neural Communication Interfaces (BNCI). WAY demonstrators are able to restore a physiol ...
Voir le projet

 7