Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 
The aim of the SOURCE Network of Excellence is to create a robust and sustainable virtual centre of excellence capable of exploring and advancing societal issues in security research and development. The SOURCE Network of Excellence is built upon five types of activities: networking activities, research, information gathering, education and training, and knowledge-sharing. These five areas togethe ...
Voir le projet

 14

 TERMINÉ 
IMPRESSIONS will provide empirically-grounded, transformative science that quantifies and explains the consequences of high-end climate scenarios for both decision-makers and society. IMPRESSIONS will develop and apply a novel participatory methodology that explicitly deals with uncertainties and strong non-linear changes focussing on high-end climate change, but also including intermediate warmin ...
Voir le projet

 25

 TERMINÉ 

HEalthy Youth

Date du début: 18 mai 2016, Date de fin: 17 déc. 2017,

With HEY a project about the healthy living habits of the young people of Europe, the City of Campodoro aims at offering to its community an opportunity of cultural and social development .The Project, within the framework of the social development and the prevention of addictions, will deal with the issues of obesity, drugs , alcoholism, and gambling addiction.It is common knowledge that addict ...
Voir le projet

 9

 TERMINÉ 

Engine Module Validators (ENOVAL)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

The ENOVAL project will provide the next step of engine technologies to achieve and surpass the ACARE 2020 goals on the way towards Flightpath 2050. ENOVAL completes the European 7th Framework Programme (FP7) roadmap of Level 2 aero engine projects. ENOVAL will focus on the low pressure system of ultra-high by-pass ratio propulsion systems (12 < BPR < 20) in conjunction with ultra high overall pre ...
Voir le projet

 37

 TERMINÉ 
FoAM-BUILD will develop next generation External Thermal Insulation Composite Systems (ETICS) for new builds and retrofitting applications. This comprises innovations in:1) Insulation material: development of new, lightweight and highly insulating nano-cellular foams, with a 50% reduction in thermal conductivity compared to conventional insulation elements. Non-halogenated nano-based flame retarda ...
Voir le projet

 12

 TERMINÉ 

European Control System Security Incident Analysis Network (ECOSSIAN)

Date du début: 1 juin 2014, Date de fin: 31 mai 2017,

The protection of critical infrastructures increasingly demands solutions which support incident detection and management at the levels of individual CI, across CIs which are depending on each other, and across borders. An approach is required which really integrates functionalities across all these levels. Cooperation of privately operated CIs and public bodies (governments and EU) is difficult b ...
Voir le projet

 22

 TERMINÉ 
With the growing relevance of distributed renewable energy sources (DRES) in the generation mix and the increasingly pro-active demand for electricity, power systems and their mode of operation need to evolve. evolvDSO will define future roles of distribution system operators (DSOs) on the basis of scenarios which will be driven by different DRES penetration levels, various degrees of technologica ...
Voir le projet

 16

 TERMINÉ 

Computational Cloud Services and Workflows for Agile Engineering (CloudFlow)

Date du début: 1 juil. 2013, Date de fin: 31 déc. 2016,

Traditionally, the European manufacturing industry is characterized by innovative technology, quality processes and robust products which have leveraged Europe's industrialization. However, globalization has exposed Europe's industry to new emerging and industrialized manufacturing markets and the current economic challenges have decelerated the internal boost and investment, respectively. Hence, ...
Voir le projet

 29

 TERMINÉ 
The project aims at developing innovative systems for masonry enclosures, to be used for façades, envelopes and internal partitions of reinforced concrete framed buildings, to derive sound concepts for their analysis and to develop reliable, simple and efficient methods for their design in the everyday engineering practice. Masonry enclosure systems have excellent, yet still improvable, performanc ...
Voir le projet

 16

 TERMINÉ 
The DREAM project will lay the foundations for a novel heterarchical management approach of complex electrical power grids, providing new mechanisms for consumer involvement in economical and ecological electricity use as well as stable and cost effective integration of distributed renewable resources.Applying the principles of autonomous agent-based systems to the control and management of the el ...
Voir le projet

 15

 TERMINÉ 
INNO INDIGO will set up a more relevant STI approach in terms of social and technical innovation, a broader in terms of funding and a more focussed in terms of topics - to answer the needs of the European as well as Indian societies and markets and address the needs of the engines for innovation. These are SMEs and industries as well as existing clusters of excellence. Future joint programmes will ...
Voir le projet

 16

 TERMINÉ 
Hybrid-EVs and Full-EVs on the market are products where the Internal-Combustion-Engine (ICE) is supplemented by an electric-motor (HEV) or replaced by an all-electric power-train (FEV). Neither approach address lightweight or modularity inheriting the same disadvantages as conventional ICEV - Electrification of mobility must face a conceptual rEVOLUTION! This project breaks the paradigm of curren ...
Voir le projet

 25

 TERMINÉ 

A BLUEPRINT of Haematopoietic Epigenomes (BLUEPRINT)

Date du début: 1 oct. 2011, Date de fin: 30 sept. 2016,

In response to the call for a high impact initiative on the human epigenome, the BLUEPRINT Consortium has been formed with the aim of generating at least 100 reference epigenomes and studying them to advance and exploit knowledge of the underlying biological processes and mechanisms in health and disease. BLUEPRINT will focus on distinct types of haematopoietic cells from healthy individuals and o ...
Voir le projet

 45

 TERMINÉ 
The proposed project aims to develop innovative methods, tools and concepts for the replacement of copper in European organic and low input fruit, grapevine, potato, and tomato production systems. Copper-free production systems will be achieved by (i) providing alternative compounds, (ii) ‘smart’ application tools and (iii) by integrating these tools into traditional and novel copper-free crop pro ...
Voir le projet

 22

 TERMINÉ 

Simulators and Interfaces with Quantum Systems (SIQS)

Date du début: 1 mai 2013, Date de fin: 30 avr. 2016,

The overarching goal of our project is to develop systems based on direct and deterministic interactions between individual quantum entities, which by involving large-scale entanglement can outperform classical systems in a series of relevant applications.We plan to achieve that by improving technologies from atomic, molecular and optical physics as well as from solid-state physics, and by develop ...
Voir le projet

 32

 TERMINÉ 
"Windows are critical elements to control the energy performance of buildings especially for zero-energy buildings. It is of paramount importance to develop windows which show reduced U-value, weight and costs and certain features to control and harvest energy. Such a window will have a high impact in the window industry and will reduce green house gas emissions as long as the window is affordable ...
Voir le projet

 15

 TERMINÉ 

Optimising Subsidiary Crop Applications in Rotations (OSCAR)

Date du début: 1 avr. 2012, Date de fin: 31 mars 2016,

There is a need to improve sustainability in farming systems particularly through soil care and improvement, but not at the expense of productivity. One approach is to focus on a comprehensive advance in conservation tillage. This will be developed from improved ways of integrating subsidiary crops (SC) as living or dead mulches or cover crops with the main crops in rotations so as to simultaneous ...
Voir le projet

 20

 TERMINÉ 

Creating an Agenda for Research ON Transportation sEcuity (CARONTE)

Date du début: 1 sept. 2014, Date de fin: 29 févr. 2016,

Easy, efficient, safe and secure transportation is a core factor for European growth, collaboration and employment and therefor an item in the Europe 2020 strategy. Land transportation has two main challenges concerning security: avoiding interrupts of transport itself to assure the flow of freight and passengers to guarantee supply of the population and avoiding that transportation modes themselv ...
Voir le projet

 12

 TERMINÉ 

Network for Integrated Cellular Homeostasis (NICHE)

Date du début: 1 janv. 2012, Date de fin: 31 déc. 2015,

"There is a need for greater understanding of integrated cellular physiology to exploit cells and to tailor their activities to optimise microbial productivity in synthetic circuits and to limit microbial activity in food and pharmaceutical products. Understanding the integration of the cellular metabolic processes is fundamental to developing and exploiting cells. We have assembled a team of inte ...
Voir le projet

 9

 TERMINÉ 

Future-oriented integrated management of European forest landscapes (INTEGRAL)

Date du début: 1 nov. 2011, Date de fin: 31 oct. 2015,

"The vital environmental and socio-economic role of European forests is well documented and acknowledged in policy documents of both the European Union and its member states. However, there are critical incoherencies within and between trans-national, national and local forest-related land use policies, the central issue being mismatches between the policies and their implementation at the landsca ...
Voir le projet

 22

 TERMINÉ 

Food Planning and Innovation for Sustainable Metropolitan Regions (FOODMETRES)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2015,

The proposed project ‘Food Planning and Innovation for Sustainable Metropolitan Regions’ (FOODMETRES) thrives to assess both the environmental and the socio-economic impacts of food chains with regard to spatial, logistical and resource dimension of growing food as well as food planning and governance. Recognising that food production and consumption is not only linked via food chains in a physica ...
Voir le projet

 18

 TERMINÉ 

Secure idenTity acrOss boRders linKed 2.0 (STORK 2.0)

Date du début: 1 avr. 2012, Date de fin: 30 sept. 2015,

"Secure idenTity acrOss boRders linKed 2.0" builds on the success and results of STORK by taking further steps to decisively push the lines for wider uptake of eID in Europe, aiming at realising a single European electronic identification & authentication area. Its highly innovative focus lies on the convergence of private and public sectors in an operational framework and infrastructure encompass ...
Voir le projet

 65

 TERMINÉ 

Increasing Resilience in Surveillance Societies (IRISS)

Date du début: 1 févr. 2012, Date de fin: 31 janv. 2015,

"IRISS (Increasing Resilience in Surveillance Societies) will investigate societal effects of different surveillance practices from a multi-disciplinary social science and legal perspective. It will focus on the effects that surveillance practices introduced to combat crime and terrorism can have on citizens in open and democratic societies. It will review surveillance systems used in fighting cri ...
Voir le projet

 17

 TERMINÉ 
The HealthBread project (HealthBread product innovation based on FP6 HEALTHGRAIN results and knowledge) will, based on an SME and consumer oriented approach, develop whole grain and white breads with further improved nutritional and product quality by applying scientific and technological knowledge from the EU FP6 HEALTHGRAIN project into production and marketing of commercially viable, healthier ...
Voir le projet

 18

 TERMINÉ 

Technology & Design Kits for Printed-Electronics (TDK4PE)

Date du début: 1 oct. 2011, Date de fin: 30 sept. 2014,

The goal of Technology & Design Kit for Printed Electronics (TDK4PE) is to set a fundamental change in the way printed electronics (PE) are designed and manufactured in Europe, with the aim of reducing costs and time-to-market by more than an order of magnitude for more complex designs than ever before by addressing thousands of transistors on a substrate.The key is to develop a methodology to ena ...
Voir le projet

 10

 TERMINÉ 

Pharmaceutical Medicine Training Programme (PHARMATRAIN)

Date du début: 1 mai 2009, Date de fin: 30 avr. 2014,

"The proposed Pharmaceutical Medicine Training Programme provides a comprehensive solution for the complex needs of integrated drug development for all professionals involved, incl. physicians, pharmaceutical scientists,biologists, biometricians, health economists, and safety and regulatory scientists from universities, regulatory agencies, large, middle-sized and small pharmaceutical enterprises, ...
Voir le projet

 52

 TERMINÉ 

SEISMIC ENGINEERING RESEARCH INFRASTRUCTURES FOR EUROPEAN SYNERGIES (SERIES)

Date du début: 1 mars 2009, Date de fin: 31 juil. 2013,

"European seismic engineering research suffers from extreme fragmentation of research infrastructures (RI) between countries and limited access to them by the S/T community of earthquake engineering, especially that of Europe’s most seismic regions. A 23-strong Consortium of the key actors in Europe’s seismic engineering research (including 3 industrial partners) addresses these problems in a sust ...
Voir le projet

 23

 TERMINÉ 

Acoustically Green Road Vehicles and City Areas (CITYHUSH)

Date du début: 1 janv. 2010, Date de fin: 31 déc. 2012,

"The CITYHUSH project will support city administrations in the production and implementation of noise action plans according to the directive EC 2002/49.The identified hot spots and noise acting plans made with the existing technology suffer from major shortcomings:1. poor correlation between hot spots with annoyance and complaints;2. most measures lead to increased emissions;3. only indoor noise ...
Voir le projet

 17

 TERMINÉ 
The goal of this collaboration is to develop a roadmap for future European research in CAM that is appropriate for the health care needs of EU citizens, and acceptable to the EU parliament as well as their national research funders and healthcare providers. We will enable meaningful reliable comparative research and communication within Europe and create a sustainable structure and policy. CAMbrel ...
Voir le projet

 17

 TERMINÉ 

Tools and Expertise for 3D Collection Formation (3D-COFORM)

Date du début: 1 déc. 2008, Date de fin: 30 nov. 2012,

Description New tools for the digitisation of cultural heritage artefacts will result in richer and more realistic representations, better documentation and higher cost effectiveness of digitisationThe project addresses all aspects of 3D-capture, 3D-processing, the semantics of shape, material properties, metadata and provenance, integrat ...
Voir le projet

 20

 TERMINÉ 

European coordination action on human biomonitoring (COPHES)

Date du début: 1 déc. 2009, Date de fin: 30 nov. 2012,

This proposal has been elaborated by a consortium of 35 partners coming from 27 European countries and including scientists, government institutions and authorities, NGOs and industry. The main goal is to develop a coherent approach to HBM in Europe as requested by ACTION 3 of the EU Environment and Health Action Plan through coordination of ongoing and planned HBM activities. The project will exp ...
Voir le projet

 40

 TERMINÉ 

Vehicle Concept Modelling (VECOM)

Date du début: 1 oct. 2008, Date de fin: 30 sept. 2012,

The aim of the proposed training network is to provide dedicated research training in the emerging field of vehicle concept modelling for up-front pre-CAD functional performance engineering, bridging between industry and academia across Europe. The research area is of highly strategic importance to European automotive OEMs, who must launch products on an ever shorter time frame, at increased quali ...
Voir le projet

 15

 TERMINÉ 

Biometric European Stakeholders Network (BEST NETWORK)

Date du début: 1 oct. 2009, Date de fin: 31 mars 2012,

The main objective of BEST NETWORK is to bring together knowledge and hands-on experience with biometric deployments, addressing gaps in the gathering and dissemination of best practices, lessons learned in the scope of studies, pilots and deployments on European and Member States level.Recent experiences with biometrics-enabled systems and services have revealed issues beyond accuracy of identifi ...
Voir le projet

 24

 TERMINÉ 

Markers for emphysema versus airway disease in COPD (EvA)

Date du début: 1 oct. 2008, Date de fin: 31 mars 2012,

COPD is characterized by emphysema (destruction of the lung alveoli) and airway disease (inflammation and thickening of the bronchial wall) both of which lead to airway obstruction. These two features co-exist in most patients but some patients present with only emphysema (E) or only airway disease (A). The aim of the project is to identify markers specific to E and A of COPD. Our hypothesis is th ...
Voir le projet

 15

 TERMINÉ 

Keeping Emulation Environments Portable (KEEP)

Date du début: 1 févr. 2009, Date de fin: 29 févr. 2012,

Description KEEP creates portable emulators enabling access to and use of digital objects stored on outdated media. The technology is being tested on early computer games.KEEP is developing an Emulation Access Platform enabling the accurate rendering of objects produced on obsolete machines, so that they can be securely accessed in the lo ...
Voir le projet

 9

 TERMINÉ 

Fusion Energy Materials Science – Coordination Action (FEMaS-CA)

Date du début: 1 oct. 2008, Date de fin: 30 sept. 2011,

The timely availability of qualified materials for use in fusion power reactors is a necessity for the fast deployment of fusion power. 27 European institutions have joined together in the FEMaS-CA to advance fusion materials science in Europe and in close cooperation with EFDA, the European Fusion Development Agreement. The overarching objective of this Coordination Action is: The FEMaS-CA w ...
Voir le projet

 31

 TERMINÉ 

Blastworthy textile-based luggage containers for aviation safety (FLY-BAG)

Date du début: 1 déc. 2008, Date de fin: 28 févr. 2011,

"The rise in worldwide terrorism has required measures be taken to harden aircraft against catastrophic in-flight failure due to concealed explosives. Commercial aviation can be protected from the threat of explosives by : 1. preventing explosives from reaching the aircraft 2. mitigating the effects of an explosive protecting the aircraft from an onboard explosion. The risk that a small quantity ...
Voir le projet

 10

 TERMINÉ 

Biobanking and Biomolecular Resources Research Infrastructure (BBMRI)

Date du début: 1 févr. 2008, Date de fin: 31 janv. 2011,

The Preparatory Phase for a pan-European Biobanking and Biomolecular Resources Research Infrastructure (BBMRI) will focus on technical, legal, governance, and financial issues to • prepare to construct BBMRI, building on existing biobanks, resources and technologies, specifically complemented with innovative components and properly embedded into European scientific, ethical, legal and societal fra ...
Voir le projet

 55

 TERMINÉ 

INcreasing Security and Protection through Infrastructure REsilience (INSPIRE)

Date du début: 1 nov. 2008, Date de fin: 31 janv. 2011,

The INSPIRE proposal aims at enhancing the European potential in the field of security by assuring the protection of critical information infrastructures through the identification of their vulnerabilities and the development of innovative techniques for securing networked process control systems.To increase the resilience of such systems INSPIRE will develop traffic engineering algorithms, self-r ...
Voir le projet

 9

 TERMINÉ 
"This proposal aims at a compact version of a gasifier by integrating the fluidized bed steam gasification of biomass and the hot gas cleaning and conditioning system into one reactor vessel. Such arrangement will guarantee the conversion of tar, elimination of trace elements and an efficient abatement of the particulate, delivering high purity syngas, suitable to assure a substantial share of pow ...
Voir le projet

 10