Rechercher des projets européens

27 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Fully recyclable 100% PET package for food contact with O2 barrier, improved transparency and low CO2 footprint (GREEN PACK)

Date du début: 1 déc. 2013, Date de fin: 30 nov. 2016,

"The main scientific and technological objective of the current project is: producing prototypes of fully recyclable PET trays for food preservation by using recycled PET (RPET). The proposed idea will be able to give a solution to this problem by providing a mono-material tray in virgin PET (for food contact) and RPET for the rest of the tray. The necessary barrier properties will be guaranteed b ...
Voir le projet

 9

 TERMINÉ 

Credits-based, people-centric approach for the adoption of healthy life-styles and balanced Mediterranean diet in the frame of social participation and innovation for health promotion (CREDITS4HEALTH)

Date du début: 1 sept. 2013, Date de fin: 31 août 2016,

The CREDITS4HEALTH project’s main goal is to develop a person centric approach based on the “credits for health” concept to reduce sedentary behavior and enhance the level of physical activity and healthy dietary styles in people living in Euro-Mediterranean Countries. The concept of credits is simple and effective: this means that each participant will earn credits from his local, regional or nat ...
Voir le projet

 16

 TERMINÉ 

Development of a cost effective system for exchange and management of information related to construction products in terms of articles, addressing European legislation and market requirements (PRODUCTINFOX)

Date du début: 1 juin 2013, Date de fin: 31 mai 2016,

This proposal addresses the collective challenge faced by the SMEs in the construction sector of collecting and using information on products and equipment – designated articles – to comply with regulatory requirements and expectations from their customers.The new regulation on construction products lays down a number of provisions on products to be used in the sector to improve the free flow of p ...
Voir le projet

 12

 TERMINÉ 

Sensor Based Detection of Implant Loosening in Total Hip Replacements (SMART-HIP)

Date du début: 1 févr. 2014, Date de fin: 31 janv. 2016,

"Ageing, sedentary behaviour,and obesity are predictors of osteoarthritis, and the combination of arthritis and obesity causes an undue stress on joints, and when conservative treatments no longer yield a satisfactory response, joint replacement becomes necessary. Despite the standardized procedures, a significant share of total joint replacements fail because the prosthesis becomes loose or becau ...
Voir le projet

 6

 TERMINÉ 

In-pipe flexible robot for water pipes inspection (TRACT)

Date du début: 1 déc. 2013, Date de fin: 30 nov. 2015,

Recent studies surprisingly estimate the losses in European Water Distribution Networks to an average of around 30 to 40%, peaking to more than 50% in some Eastern European countries. It is clear that the economic impact and scarcity of public water sources mandate the development of a systemic leakage control program; while this would seem the most intuitive and feasible approach, currently no te ...
Voir le projet

 8

 TERMINÉ 

Development of an automated processing method, a “Green Box”, for production of bio heating oil from waste sources (BIOHEATINGOIL)

Date du début: 1 sept. 2013, Date de fin: 30 nov. 2015,

The BioHeatingOil project will develop a robust and cost-effective automated processing method, a “Green Box”, for production of bio heating oil - using waste sources in form of fat & grease from the food production industry and grease traps as raw material. In current State of the art (SoA) methods which use fat & grease as a raw material, the quality of the raw material put into the production d ...
Voir le projet

 7

 TERMINÉ 

Innovative high efficiency phase change fluid based heat engine (UP-THERM)

Date du début: 1 sept. 2013, Date de fin: 31 oct. 2015,

A simple and economic engine concept is proposed as an alternative to the conventional heat engine.The main innovative character of the project is determined by the conceptual approach toward technological solution of the challenging problems of heat engines with external heat supply. This approach includes the use of working fluids changing phase, with crucial benefits in terms of:• liquid workin ...
Voir le projet

 8

 TERMINÉ 

Durable biofilm-restraining surfaces and cleaning procedures for the food processing industry (CLEANSURF)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2015,

Efficient and safe food production is a prerequisite for building a society capable of feeding the growing population. With the world population growing at extraordinary rates and the consequent repercussions in the dietary and consumption habits, it is estimated that food production has to be increased at least by 70% in the next 30 years, with the looming threat of a proportional surge of food-b ...
Voir le projet

 7

 TERMINÉ 

Electric Motor based on PArallel paTH effect (EMPATHY)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2015,

EMPATHY aims at developing an innovative configuration of permanent magnet electrical motor, based on the evolution of the FSPM (Flux Switching Permanent Magnet) architecture, enabling to limit torque ripple which traditionally affects such a configuration, opening the way to the industrial exploitation of magnetic flux switching motors, which are able to offer unparalleled performance.The novel u ...
Voir le projet

 6

 TERMINÉ 

"A new methodology based on an advanced molecular probe for early detection of DPD enzyme deficiency in oncological patients, also enabling a personalised and effective drug management" (CARESS)

Date du début: 1 mai 2013, Date de fin: 30 juin 2015,

"Amongst all the chemotherapy agents, 5-FU (fluorouracil) is being in use since 40 years, and is one of the most successful and widely employed in the treatment for breast, colon, and skin cancer, three of the most frequently occurring malignant tumours. In general, 5-FU is relatively well tolerated at standard doses, but there are some important issues that must be duly taken into consideration: ...
Voir le projet

 7

 TERMINÉ 

Metal Hydride Heat Pump for Waste Heat Recovery in Vans Refrigeration Systems (HP-ACS)

Date du début: 1 avr. 2013, Date de fin: 31 mars 2015,

According to Global Industry Analysis Inc., refrigerated transportation world market will reach 5 billion € by 2015. Increasing awareness about food safety, consumer spending on high value perishable goods and replacement of refrigerated vehicles are driving the growth in refrigerated transportation market. Approximately 650.000 refrigerated road vehicles are currently in use within the EU.The in ...
Voir le projet

 6

 TERMINÉ 

Fluid Foods Pasteurizer and Homogenizer based on Centrifugal Hydrocavitation Reactor (FCHR)

Date du début: 1 sept. 2012, Date de fin: 31 oct. 2014,

The FCHR project proposes the implementation of an integrated pasteuriser and homogenizer for fluid foods based on an alternative approach induced only by mechanical means: hydrodynamic cavitation, which consists in the generation of huge amounts of energy in the form of shock waves, due to the turbulence produced in a fluid by pressure fluctuations. Opposite to currently studied alternatives, su ...
Voir le projet

 8

 TERMINÉ 

Separating eggshell and its membrane to turn eggshell waste into valuable source materials (SHELLBRANE)

Date du début: 1 mai 2012, Date de fin: 30 avr. 2014,

Agricultural waste management is one of the most emerging problems of food processors. The amount of the generated waste as well as the cost of waste disposal is ever increasing across Europe. Egg processors face the problem of the disposal of eggshell waste.According to EC regulations, industrial egg-shell is considered as hazardous waste and it is collected by national authorities. This can indu ...
Voir le projet

 8

 TERMINÉ 

Development of a universal flood protection tool using the force of the water to protect against floods (INFLATER)

Date du début: 1 oct. 2011, Date de fin: 31 janv. 2014,

"The flooding of rivers has always been a problem, and thanks to advances in civil engineering humans learnt of methods to keep the river in its bed. In urban areas especially, but in rural areas as well, embankments have been built to keep the river where it belongs. Unfortunately even with embankments flooding occurs as we can see it all over Europe and the World. Due to global warming flooding ...
Voir le projet

 9

 TERMINÉ 

"IMPROVING PLC PROGRAMMING THROUGH A NEW GRAPHICAL, OBJECT-ORIENTED AND BRAND- INDEPENDENT PROGRAMMING FRAMEWORK" (PLC-PROG)

Date du début: 1 sept. 2010, Date de fin: 31 août 2013,

"Most Modern automation installations are driven by Programmable Logic Controllers (PLCs). Nowadays, the low level programming languages that have been used for decades, such as Ladder Diagrams (LD), are still being used to develop the new software. Besides, there are ‘hidden’ penalties: PLC software is brand dependent. The solution to this problem has been the adoption of new paradigms that allow ...
Voir le projet

 12

 TERMINÉ 

SEA Kinetic Energy Recovery System (SEAKERS)

Date du début: 1 janv. 2011, Date de fin: 31 déc. 2012,

"SEAKERS originates from a joint initiative of top level SMEs and players of the marine yachting sector, aiming at introducing a high impact potential innovation, which it is expected to provide a valuable market and economic return; the SMEPs partnered together in order to develop a research and industrial action plan. SEAKERS intends to make available an innovative device, both in is concept and ...
Voir le projet

 11

 TERMINÉ 

Development of a sustainable and cost effective ballast water treatment technology with reverse pulsed DC electric field that excludes formation of oxidising free radicals (EcoSeaSafe)

Date du début: 1 nov. 2010, Date de fin: 31 oct. 2012,

The objective of the proposed project is development of a ballast water treatment system by using a pulsed DC electrical field for microbial inactivation of invasive species in ballast water. The EcoSeaSafe applies an electrical designed pulse shape with instant reversation of the current direction, which generates a reversed electric field that prevents a secondary reaction of radicals which chan ...
Voir le projet

 7

 TERMINÉ 

Development of a novel autonomous vehicle significantly reducing costs related to subsea sensors deployment and recovery (AutoDrop)

Date du début: 1 nov. 2010, Date de fin: 31 oct. 2012,

There is a distinct need for an improved method for accurate and inexpensive deployment and retrieval of seabed sensors and equipment. The AutoDrop will be hydro dynamically designed in order to glide through the water experiencing a minimum of drag. The rudders will maintain stability and change the direction if desired. It is important that the time used by the AutoDrop to travel from the surfac ...
Voir le projet

 11

 TERMINÉ 

Development of a cost effective system for exchanging information and managing risks of chemicals for the construction industry, addressing new challenges related to European chemical legislation (ChemXchange)

Date du début: 1 janv. 2009, Date de fin: 31 oct. 2012,

This proposal addresses the great challenge faced by the SMEs in the construction sector of complying with today’s obligations and regulatory requirements regarding exchange of information on hazardous chemicals between various actors in the sector. The European construction sector, being the largest industrial sector highly dominated by small enterprises, is a major downstream user of chemicals a ...
Voir le projet

 15

 TERMINÉ 

Patient Centric Approach for an Integrated, Adaptive, Context Aware Remote Diagnosis and Management of Cardiovascular Diseases (BRAVEHEALTH)

Date du début: 1 mars 2010, Date de fin: 31 juil. 2012,

BRAVEHEALTH proposes a patient-centric vision to CVD management and treatment, providing people already diagnosed as subjects at risk with a sound solution for continuous and remote monitoring and real time prevention of malignant events. The solution proposed will be made up of the following sub-systems: 1)WEARABLE UNIT: it is an innovative concept of miniaturised multi-parameter sensor, able to ...
Voir le projet

 18

 TERMINÉ 

PERFOMANCE OF INNOVATIVE MECHANICAL CONNECTIONS IN PRECAST BUILDINGS STRUCTURES UNDER SEISMIC CONDITIONS (SAFECAST)

Date du début: 1 mars 2009, Date de fin: 29 févr. 2012,

"The seismic behaviour of connections in precast construction systems has been largely recognized as a crucial matter to be addressed both by the industry sector and by the related research community. In spite of this situation, the complexity of the problem and the variety of inherent issues to be harmonizedly dealt with in proposing design procedures for connections and precast structures as a w ...
Voir le projet

 17

 TERMINÉ 

"Biosensor based instrumentations to be used in vineyards and wineries for fast and sensitive detection of Botrytis cinerea ,grey rot, in grapes" (SAFEGRAPE)

Date du début: 1 nov. 2009, Date de fin: 30 nov. 2011,

"Botrytis cinerea is a fungus that affects wine grapes and is responsible for the grey rot infection, which can strongly alter the quality of grapes and derived wine, causing: browning, destruction of flavour compounds, decrease of foaming properties, fermentation stopping. Grey rot is the largest infection of grapes in vineyards all over the world and is a major problem both for wine growers and ...
Voir le projet

 10

 TERMINÉ 

Development of innovative and sustainable technology for control of marine biofouling on heat exchangers of vessels with ozone technology (BioFoulControl)

Date du début: 1 sept. 2009, Date de fin: 30 nov. 2011,

The objective of the proposed project is development of a cost effective and sustainable seawater treatment system to control accumulation of marine organisms on heat exchangers of vessels by applying ozone technology. To maximize the dispersion in the seawater and achieve effective contact between water and ozone, there is a need to develop a novel ozone injection and dispersion unit. In addition ...
Voir le projet

 9

 TERMINÉ 

Development of automated technology for large scale land based production of lobster juveniles and lobster to market size, including development of robotic feeding and imaging control system (LobsterPlant)

Date du début: 15 sept. 2008, Date de fin: 14 sept. 2011,

Strategic Objectives Addressed: The proposed project is focused on making large scale land based farming of European and American lobster feasible, both financially and practically, by developing automated technology for feeding and monitoring of each lobster individually. European and American lobster are cannibalistic in nature, and are therefore kept in individual housing cells demanding indiv ...
Voir le projet

 11

 TERMINÉ 

BIOETHANOL PRODUCTION VIA LIGNOCELLULOSIC FERMENTATION OF OLIVE OIL RESIDUES (ETOILE)

Date du début: 1 nov. 2008, Date de fin: 31 janv. 2011,

"Bioethanol has been increasingly becoming the renewable energy source that could reduce the oil dependence of the developed countries. Biorefineries can use the locally grown agriculture to produce ethanol. However, food chain supply is beginning to suffer the effects of the ethanol massive production raising major ethical concerns. Cellulosic ethanol can overcome the environmental risks that acc ...
Voir le projet

 9

 TERMINÉ 

Development of a X-Ray tube based on the Field Emission properties of Carbon Nanotubes (NANORAY)

Date du début: 1 nov. 2008, Date de fin: 31 janv. 2011,

"NANORAY aims to realize an innovative device capable to generate X-rays by means of a novel concept of cold cathode, based on carbon nanotubes selectively grown upon ad-hoc synthesized nanostructures (such as vertically oriented nanotubes on metallic tips, selected deposition of CNTs on predetermined areas, array of oriented bundles, etc..) Its performances can be wrapped up by mentioning some of ...
Voir le projet

 10

 TERMINÉ 

Good practices for European developers of advanced ICT-enabled energy-efficiency Systems (GENESYS)

Date du début: 1 sept. 2008, Date de fin: 12 avr. 2010,

So far, several EU funded projects and other initiatives have taken up the challenge of Promoting sustainable development, Ensuring security and diversity of energy supply, Improving industrial competitiveness, Enhancing economic and social cohesion; furthermore, very valuable research work has been carried out in the past, but the gap to the market(s) and to the full inclusion of the nowadays tec ...
Voir le projet

 10