Rechercher des projets européens

30 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Development of a real-time information and monitoring system to support the risk assessment of nanomaterials under REACH (LIFE NanoMOnitor)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2018,

Background Nanotechnology is one of the fastest growing and most promising technologies with implications for a wide range of sectors from electronics and ceramics to optics and automation. The number of Engineered Nanomaterials (ENMs) available on the market is increasing, but concerns have been raised about their potential impacts on human health and t ...
Voir le projet

 4

 TERMINÉ 

Development of an innovative manufacturing process for the in-LINE COAting of pultruded composites (COALINE)

Date du début: 1 sept. 2013, Date de fin: 28 févr. 2017,

"COALINE will develop a in-line clean one-stage process, which is free of VOCs and small particles emissions, able to produce properly coated composite pultruded profiles by means of the development of the sensing technology, advanced mould design and microwave aided curing needed to foster an improved composite – coating adhesion with a reduced labor and process cost. COALINE profiles will be joi ...
Voir le projet

 14

 TERMINÉ 

Arrowhead (ARROWHEAD)

Date du début: 1 mars 2013, Date de fin: 28 févr. 2017,

"Our society is facing both energy and competitiveness challenges. These challenges are tightly linked and require new dynamic interactions between energy producers and energy consumers, between machines, between systems, between people and systems, etc. Cooperative automation is the key for these dynamic interactions and is enabled by the technology developed around the Internet of Things and Ser ...
Voir le projet

 87

 TERMINÉ 

TRADEIT: Traditional Food: Entrepreneurship, Innovation and Technology Transfer (TRADEIT)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2016,

The TRADEIT project is a multidisciplinary, multi-sectorial collaborative project supporting a Network of Traditional Food SMEs and Food Researchers in the areas of Collaboration, Innovation, Entrepreneurship, Knowledge and Technology Transfer to increase the competitiveness and inter-regional advantage of Traditional Food Producing SMEs. This will be achieved through focused regional coordination ...
Voir le projet

 20

 TERMINÉ 

Best practices effectiveness, prevention and protection measures for control of risk posed by engineered nanomaterials (LIFE nanoRISK)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2016,

Background The development of nanomaterials - defined as having at least one dimension of 100 nanometres or less – is a particularly exciting area of science and industry, which is expected to yield numerous technological advances. More than 300 European businesses are now involved in the production of substances at nano scale and overall output is soon ...
Voir le projet

 5

 TERMINÉ 

Joining up ICT and service processes for quality integrated care in Europe (SmartCare)

Date du début: 1 mars 2013, Date de fin: 31 août 2016,

Against the background of the European Innovation Partnership on Active & Healthy Ageing, SmartCare aims to define a common set of standard functional specifications for an open ICT platform enabling the delivery of integrated care to older European citizens. A total of 24 regions and their key stakeholders will define a comprehensive set of integration building blocks around the challenges of dat ...
Voir le projet

 46

 TERMINÉ 

Extended shelf-life biopolymers for sustainable and multifunctional food packaging solutions (NANOBARRIER)

Date du début: 1 mars 2012, Date de fin: 29 févr. 2016,

The overall concept of NanoBarrier is to develop a new nanotechnology platform based on inorganic-organic hybrid polymers, microfibrillated cellulose, nanocapsules with controlled permeability and additive technology and combine this with resource-efficient processing technologies to realize safe and extended shelf-life and multifunctional biopolymer food packaging solutions. These solutions based ...
Voir le projet

 18

 TERMINÉ 

EPIC-CVD: Individualised CVD risk assessment: tailoring targeted and cost-effective approaches to Europe's diverse populations (EPIC-CVD)

Date du début: 1 janv. 2012, Date de fin: 31 déc. 2015,

"EPIC-CVD's overarching goal is to provide clinicians and policy-makers with a menu of evidence-based options for cost-effective individualised risk assessment that enables the EU's increasingly resource-constrained economies to achieve more personalised predictive medicine in harmony with Europe's diverse cultures and healthcare systems.We will achieve this through developing and validating innov ...
Voir le projet

 33

 TERMINÉ 

CEREAL WASTE VALORISATION THROUGH DEVELOPMENT OF FUNCTIONAL KEY FIBRES TO INNOVATE IN FIBRE PACKAGING MATERIALS (FUNKIFIBRE)

Date du début: 1 sept. 2013, Date de fin: 30 nov. 2015,

Cereal waste biomass is a potential source of valuable compounds such as bio-based fibres that can be used in new potential applications. This is the case of the microfibrillated cellulose (MFC) which is a novel type of cellulose with nano-scale dimensions and very interesting properties for the development of composite materials due to its high strength and stiffness combined with its low weight, ...
Voir le projet

 6

 TERMINÉ 

New Generation of Functional Cellulose Fibre Based Packaging Materials for Sustainability (NEWGENPAK)

Date du début: 1 déc. 2011, Date de fin: 30 nov. 2015,

"The NEWGENPAK ITN is an interdisciplinary research training network of 8 European universities, 3 research institutes and 6 enterprises, three of which are Full partners. Its primary aim is to create a European training network designed to improve the career prospects of its 10 ESRs and 2 ERs in both the public and private sector. The network will deliver a joint multidisciplinary research traini ...
Voir le projet

 12

 TERMINÉ 

Water Enhanced Resource Planning "Where water supply meets demand" (WatERP)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2015,

Water supply involves many actors. While many management tools exist, they cannot intercommunicate and no framework is available for integrating all of them, preventing integrated water resources management to be fully achieved. WatERP will develop a web-based Open Management Platform (OMP), integrating intelligent systems through open interfaces, to enable water supply distribution chains to be m ...
Voir le projet

 11

 TERMINÉ 

Roll-to-roll PAper Sensors (ROPAS)

Date du début: 1 mai 2011, Date de fin: 30 avr. 2015,

ROPAS aims to develop a wireless sensor device on a paper surface which can be manufactured using high-end and low-cost printing techniques.A technological platform is created on a fiber based substrate consisting of the following building blocks: 1. a planar printed battery, 2. a (wireless) signaling device, and 3. a printed sensor switch. Hereto, recent advantages in nanotechnology ((encapsulati ...
Voir le projet

 15

 TERMINÉ 

Mitigation of risk and control of exposure in nanotechnology based inks and pigments - NANOMICEX - (NANOMICEX)

Date du début: 1 avr. 2012, Date de fin: 31 mars 2015,

The main aim of NANOMICEX project is to reduce the potential risk upon workers’ exposure to the engineered nanoparticles employed in the operative conditions of the inks and pigments industry, by addressing at the health and environmental consequences associated with the inclusion of nanoadditives within all stages of nanotechnology based products (production, use and disposal). To achieve it, new ...
Voir le projet

 13

 TERMINÉ 

Active packaging for extended shelf life of peeled and cut fruit (EASYFRUIT)

Date du début: 1 janv. 2013, Date de fin: 31 déc. 2014,

Even though the variety of fruits in the supermarket is increasing, their consumption is decreasing daily in Europe. Low fruit intake is responsible for many diseases, obesity among others, and 2.7 million (4.9%) deaths worldwide (85% from cardiovascular diseases, 15% from cancers). Statistics indicate that recommended daily fruit consumption is not meet; it is especially critical for children (57 ...
Voir le projet

 7

 TERMINÉ 

Boosting Life Cycle Assessment Use in European Small and Medium-sized Enterprises: Serving Needs of Innovative Key Sectors with Smart Methods and Tools (LCA to go)

Date du début: 1 janv. 2011, Date de fin: 31 déc. 2014,

"""LCA to go"" develops sectoral methods and tools for bio-based plastics, industrial machinery, electronics, renewable energy, sensors and smart textiles. These sectors have been chosen, as the manufacturers show a high interest in making clear the environmental benefits of their products to customers (""Green industries"") and in prioritizing so they can reduce their environmental impacts. This ...
Voir le projet

 18

 TERMINÉ 

Development of a best practices guide for the safe handling and use of nanoparticles in packaging industries (NanoSafePACK)

Date du début: 1 déc. 2011, Date de fin: 30 nov. 2014,

The main aim of the NanoSafePACK project is to develop a best practices guide to allow the safe handling and use of nanomaterials in packaging industries, considering integrated strategies to control the exposure to nanoparticles (NP) in industrial settings, and provide the SMEs with scientific data to minimize and control the NP release and migration from the polymer nanocomposites placed on the ...
Voir le projet

 7

 TERMINÉ 

Maximisation of greenhouse horticulture production with low quality irrigation waters (CARBGROWTH)

Date du début: 1 déc. 2011, Date de fin: 30 nov. 2014,

Agriculture in the European Union faces some serious challenges in the coming decades:competition for water resources, rising costs, competition for international markets, changes in climate and uncertainties in the effectiveness of current European policies as adaptation strategies. Greenhouse production appears as an alternative to face some of the upcoming challenges. In 2009, the surface dedic ...
Voir le projet

 11

 TERMINÉ 

Advanced cellulose packaging (ADCELLPACK)

Date du début: 1 nov. 2012, Date de fin: 31 oct. 2014,

The use of bio-based materials is a promising alternative in the packaging industry to reduce the disposal and the use of non-renewable resources. A 5% substitution of these materials using Modified Atmosphere Packaging (MAP) applications would reduce over 300.000 tons of non renewable plastic packaging wastes disposal. Packaging used in MAP is usually based on multilayer plastic materials that ar ...
Voir le projet

 9

 TERMINÉ 

Collaboration Concepts for Comodality (CO3)

Date du début: 1 sept. 2011, Date de fin: 31 août 2014,

Collaboration Concepts for Co-modality, CO3 is a business strategy enabling companies throughout the supply chain to set up and maintain initiatives to manage and optimise their logistics and transport operations by increasing load factors, reducing empty movements and stimulate co-modality, through Horizontal Collaboration between industry partners, thereby reducing transport externalities such a ...
Voir le projet

 19

 TERMINÉ 

OpenLab: extending FIRE testbeds and tools (OpenLab)

Date du début: 1 sept. 2011, Date de fin: 30 juin 2014,

Experimentally-driven research is key to success in exploring the possible futures of the Internet. An open, general-purpose, shared experimental facility, both large-scale and sustainable, is essential for European industry and academia to innovate today and assess the performance of their solutions. OpenLab brings together the essential ingredients for such a facility. We extend early prototypes ...
Voir le projet

 31

 TERMINÉ 

Boosting raw material and energy efficiency using advanced sheet structure design and fibre modifications (BoostEff)

Date du début: 1 juin 2010, Date de fin: 31 mai 2013,

BoostEff aims at developing new innovative manufacturing concepts for wood-fibre based products giving a significant reduction in environmental footprint. The targeted products are important commodities for the European society: paper and construction board. In spite of the different end uses, the paper making and construction board sectors share wood fibres as a common raw material and convert th ...
Voir le projet

 14

 TERMINÉ 

UpgradiNg ICT excellence by strengthening cooperation between research Teams in an enlarged Europe (UNITE)

Date du début: 1 févr. 2010, Date de fin: 30 avr. 2013,

UNITE develops a set of activities to reinforce the cooperation between research teams and improve the level of excellence of ICT research across an Enlarged Europe, in the federated theme of "Future of the Internet". The project takes benefit from the large experience of the consortium in research oriented collaborative activities, and uses the collaborative platform of I-VLab to support its acti ...
Voir le projet

 5

 TERMINÉ 

"Development of innovative renewable trays for poultry products, based on biopolymers and bast fibers" (TRAYSRENEW)

Date du début: 1 janv. 2011, Date de fin: 31 mars 2013,

"Poultry is considered by consumers as healthy, inexpensive and a nutritious source of protein. Poultry consumption will increase 9,4% by 2015 and the projected consumption and production would increase from 98 Mt in 2009 to 120 Mt in 2017. However, poultry is a highly perishable food and it gets spoiled between 4 up to 10 days. The demand to extend of shelf life has led the industry to develop s ...
Voir le projet

 11

 TERMINÉ 

Development of a flexible and energy-efficient pressurised microwave heating process to produce 3D-shaped renewable bio-polymer foams for a novel generation of transportation packaging (REBIOFOAM)

Date du début: 1 févr. 2009, Date de fin: 31 janv. 2013,

Expanded Polystyrene (EPS), Polyurethane (EPU), Polyethylene (EPE) and Polypropylene (EPP) represent the most popular moulded cushion packaging materials applied for transport packaging applications. However, despite of their functionality, the widespread use of these polymer foams of synthetic origin implies considerable environmental concerns. The depletion of non-renewable fossil raw material r ...
Voir le projet

 11

 TERMINÉ 

Development of Sustainable Composite Materials (SustainComp)

Date du début: 1 sept. 2008, Date de fin: 31 août 2012,

The SustainComp project aims at the development of a series of completely new wood-based sustainable composite materials for use in a wide array of market sectors, ranging from the medical, transportation and packaging to the construction sector. A primary goal is to substitute fossil-based materials used in these sectors. The performance of today’s biocomposite materials is not sufficient for a r ...
Voir le projet

 17

 TERMINÉ 

Business Models for User Centred Products (MADE4U)

Date du début: 1 juil. 2008, Date de fin: 30 juin 2012,

Recent research results by one of the partners have shown that human beings display unique behaviour (visual strategy), in the way they look at objects. Thus it has been (2006) possible to create spectacles with Progressive Addition lenses which were personalized to a subject’s visual strategy, finding that they dimensionally improved overall user experience, practically eliminating the spectacle- ...
Voir le projet

 15

 TERMINÉ 

Natural Antimicrobials For Innovative and Safe Packaging (NAFISPACK)

Date du début: 1 nov. 2008, Date de fin: 31 déc. 2011,

"The main objective of the present project is to develop novel packaging technologies that will avoid/reduce and detect the growth of pathogens and spoilage microoganism responsible for product lost in perishable food products of interest: fresh fish, fresh chicken and minimally processed vegetables (MPVs). The target foods were selected among many, for different reasons: the consumption of MPVs i ...
Voir le projet

 17

 TERMINÉ 

Mass transfer of metals and sulfur between mafic silicate melts and volatiles: an interdisciplinary approach (MAGMA)

Date du début: 15 nov. 2008, Date de fin: 14 nov. 2011,

"A systematic experimental study will be conducted to obtain quantitative information on the distribution of Cu, Au and S between andesitic and basaltic silicate melts and volatile phases. The experiments will be carried out in cold seal and internally heated pressure vessels, at various conditions characteristic of upper crustal magma reservoirs. The fluid phase will be trapped as synthetic flu ...
Voir le projet

 1

 TERMINÉ 

Recovered Paper Sorting with Innovative Technologies (SORT IT)

Date du début: 1 mai 2008, Date de fin: 31 oct. 2011,

SORT IT aims at developing new technologies for a more efficient and profitable sorting of recovered paper and board from various collection systems. These include: * New sensors based on near infrared spectrometry, image analysis and colour measurement (WP 2) * New physical separation devices like robots (WP 3) * New sorting concepts (WP 4) The new sorting devices will be implemented into an indu ...
Voir le projet

 14

 TERMINÉ 

User Driven Stimulation of Radical New Technological Steps in Surface Transport (USTIR)

Date du début: 1 janv. 2009, Date de fin: 31 déc. 2010,

"U-STIR defines the know-how and technologies addressing Europe’s surface transport problems beyond 2050. A lead user centred approach will stimulate the development and capture of radical new technological concepts. Local connecting offices will analyse deficits and establish activities reaching out for fundamentally new solutions for the mobility and transport demands, improving environmental, e ...
Voir le projet

 8