Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 
... n the Arctic and beyond. APPLICATE will address this challenge and develop enhanced predictive capacity by bringing together scientists from academia, research institutions and operational prediction centres, including experts in weather and climate prediction and forecast dissemination. APPLICATE will develop a comprehensive framework for observationally constraining and assessing weather and cli ...
Voir le projet

 16

 TERMINÉ 

Soot Processes and Radiation in Aeronautical inNOvative combustors (SOPRANO)

Date du début: 1 sept. 2016, Date de fin: 31 août 2020,

For decades, most of the aviation research activities have been focused on the reduction of noise and NOx and CO2 emissions. However, emissions from aircraft gas turbine engines of non-volatile PM, consisting primarily of soot particles, are of international concern today. Despite the lack of knowledge toward soot formation processes and characterization in terms of mass and size, engine manufactu ...
Voir le projet

 18

 TERMINÉ 

INTEGRATED MODEL GUIDED PROCESS OPTIMIZATION OF STEAM CRACKING FURNACES (IMPROOF)

Date du début: 1 sept. 2016, Date de fin: 31 août 2020,

The objective of the project IMPROOF is to drastically improve the energy efficiency of steam cracking furnaces by at least 20%, in a cost effective way, while simultaneously reducing emissions of greenhouse gasses and NOx per ton ethylene produced by at least 25%. One important way to reduce the energy input in steam cracking furnaces is to reduce coke formation on the reactor wall. The use of ei ...
Voir le projet

 11

 TERMINÉ 
The goal of PRIMAVERA is to deliver novel, advanced and well-evaluated high-resolution global climate models (GCMs), capable of simulating and predicting regional climate with unprecedented fidelity, out to 2050. This capability will deliver innovative climate science and a new generation of advanced Earth System Models. Sector-specific end-users in policy and business will be identified and engag ...
Voir le projet

 19

 TERMINÉ 

Excellence in SImulation of Weather and Climate in Europe (ESiWACE)

Date du début: 1 sept. 2015, Date de fin: 31 août 2019,

... iWACE leverages two established European networks, namely (1) the European Network for Earth System modelling, representing the European climate modelling community and (2) the world leading European Centre for Medium-Range Weather Forecasts. The governance structure that defines the services to be provided will be driven by the European weather and climate science community.Weather and climate co ...
Voir le projet

 16

 TERMINÉ 

Energy oriented Centre of Excellence for computer applications (EoCoE)

Date du début: 1 oct. 2015, Date de fin: 30 sept. 2018,

The aim of the present proposal is to establish an Energy Oriented Centre of Excellence for computing applications, (EoCoE). EoCoE (pronounce “Echo”) will use the prodigious potential offered by the ever-growing computing infrastructure to foster and accelerate the European transition to a reliable and low carbon energy supply. To achieve this goal, we believe that the present revolution in hardwa ...
Voir le projet

 14

 TERMINÉ 
AFLoNext is a four year EC L2 project with the objective of proving and maturing highly promising flow control technologies for novel aircraft configurations to achieve a quantum leap in improving aircraft’s performance and thus reducing the environmental footprint. The project consortium is composed by forty European partners from fifteen countries. The work has been broken down into seven work p ...
Voir le projet

 41

 TERMINÉ 
The ability to simulate aerodynamic flows using CFD methods has progressed rapidly over the last decades and has given rise to a change in design processes in aeronautics already. But more improvement is necessary to overcome the (still) existing lack in confidence in CFD usage, based on turbulence modelling. The TILDA project will offer methods and approaches combining advanced and efficient high ...
Voir le projet

 12

 TERMINÉ 

EUDAT2020

Date du début: 1 mars 2015, Date de fin: 28 févr. 2018,

... search discipline to preserve, find, access, and process data in a trusted environment, as part of a Collaborative Data Infrastructure (CDI) conceived as a network of collaborating, cooperating centres, combining the richness of numerous community-specific data repositories with the permanence and persistence of some of Europe’s largest scientific data centres. EUDAT2020 builds on the foundations ...
Voir le projet

 36

 TERMINÉ 
"INTECOCIS is a project on energy production by combustion built by IMFT (experiments, theory and instabilities) and CERFACS (numerical simulation). Combustion produces 90 percent of the earth energy and will remain our first energy source for a long time. Optimizing combustors is a key issue to burn fossil and renewable fuels more efficiently but also to replace wind or solar energy production on ...
Voir le projet

 2

 TERMINÉ 

European Reanalysis of the Global Climate System (ERA-CLIM2)

Date du début: 11 nov. 2013, Date de fin: 1 janv. 2018,

Production of an extended climate reanalysis of the 20th century, with consistent descriptions of the global atmosphere, ocean, land-surface, cryosphere, and the carbon cycle. Production of a new reanalysis of the satellite era with near-real time data updates for climate monitoring. Research and development in various aspects of coupled data assimilation to improve the use of observations in futu ...
Voir le projet

 16

 TERMINÉ 

Enhancing prediction of tropical Atlantic climate and its impacts (PREFACE)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2017,

Tropical Atlantic climate recently experienced pronounced shifts of great socio-economic importance. The oceanic changes were largest in the eastern boundary upwelling systems. African countries bordering the Atlantic strongly depend upon their ocean - societal development, fisheries, and tourism. They were strongly affected by these climatic changes and will face important adaptation challenges a ...
Voir le projet

 30

 TERMINÉ 
The central goal of JERONIMO is the understanding of the physical mechanisms of ultrahigh bypass ratio (UHBR) engines with a bypass ratio (BPR) larger than 12 and the related installed jet noise with potential jet-wing interaction. The aim is to reduce uncertainties in jet noise characterisation of this novel installation configuration by wind tunnel tests and predictions and being able to derive ...
Voir le projet

 13

 TERMINÉ 

Low Emissions Core-Engine Technologies (LEMCOTEC)

Date du début: 1 oct. 2011, Date de fin: 30 juin 2017,

The main objective of the LEMCOTEC project will be the improvement of core-engine thermal efficiency by increasing the overall pressure ratio (OPR) to up to 70 leading to a further reduction of CO2. Since NOx increases with OPR, combustion technologies have to be further developed, at the same time, to at least compensate for this effect. The project will attain and exceed the ACARE targets for 20 ...
Voir le projet

 39

 TERMINÉ 
IS-ENES2 is the second phase project of the distributed e-infrastructure of models, model data and metadata of the European Network for Earth System Modelling (ENES). This network gathers together the European modelling community working on understanding and predicting climate variability and change. ENES organizes and supports European contributions to international experiments used in assessment ...
Voir le projet

 23

 TERMINÉ 
The World Meteorological Organization (WMO) sponsored the Global Framework on Climate Services (GFCS) where the need for actionable climate information for periods from several months up to several years for economic, industrial and political planning has been expressed. However, progress in seasonal forecasting has been slow and decadal forecasting is still incipient. At the same time, new model ...
Voir le projet

 21

 TERMINÉ 

Climate Information Platform for Copernicus (CLIPC) (CLIPC)

Date du début: 11 nov. 2013, Date de fin: 1 déc. 2016,

CLIPC will provide access to climate information of direct relevance to a wide variety of users, from scientists to policy makers and private sector decision makers. Information will include data from satellite and in-situ observations, climate models and re-analyses, transformed data products to enable impacts assessments and climate change impact indicators. The platform will complement existing ...
Voir le projet

 23

 TERMINÉ 

Full Aero-thermal Combustor-Turbine interactiOn Research (FACTOR)

Date du début: 1 déc. 2010, Date de fin: 30 nov. 2016,

To achieve lower Specific Fuel Consumption (SFC) and CO2/NOx emissions, modern turbomachineries operate at high velocities and high temperature conditions. The lack of confidence in the prediction of combustor-turbine interactions leads to apply extra safety margins on components design. Therefore, the understanding of combustor-turbine flow field interactions is mandatory to preserve High Pressur ...
Voir le projet

 24

 TERMINÉ 

Uncertainty Management for Robust Industrial Design in Aeronautics (UMRIDA)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2016,

Virtual prototyping (VP) is a key technology for environmental friendly and cost effective design in the aircraft industry. However, the underlying analysis and simulation tools (for loads, stresses, emissions, noise), are currently applied with a unique set of input data and model variables, although realistic operating conditions are a superposition of numerous uncertainties under which the indu ...
Voir le projet

 22

 TERMINÉ 
... lti-host EST FP6 programme AeroTraNet, AeroTraNet 2 clusters the complementary expertise of 5 established European academic institutes, 2 EU multi-national companies, 1 SME, and one national research centre to offer structured, flexible, well-integrated, a la carte, doctoral and post-doctoral training programme for the new generation of EU aerodynamics and noise specialists. Six academic partners ...
Voir le projet

 8

 TERMINÉ 

Coupled Parallel Simulation of Gas Turbines (COPA-GT)

Date du début: 1 janv. 2012, Date de fin: 31 déc. 2015,

"The proposed project COPA-GT has been structured to provide training of a multi-disciplinary and intersectorial nature for young Fellows in Europe in the field of propulsion and electric power generation systems. The young researchers will obtain expertise in gas turbines engine (GT) design, based on fluid and structural mechanics, combustion, acoustics and heat transfer. They will become familia ...
Voir le projet

 8

 TERMINÉ 

Research on Core Noise Reduction (RECORD)

Date du début: 1 janv. 2013, Date de fin: 31 déc. 2015,

In order to achieve the greening of the European air transport with the deployment of low emission and low noise propulsion systems the reduction of core noise plays an important role. The ability to design low core noise aero-engines requires the development of reliable prediction tools. This development demands extensive research with dedicated experimental test cases and sophisticated numerical ...
Voir le projet

 21

 TERMINÉ 

Dynamical Exascale Entry Platform (DEEP)

Date du début: 1 déc. 2011, Date de fin: 31 août 2015,

DEEP proposes to develop a novel, Exascale-enabling supercomputing platform along with the optimisation of a set of grand-challenge codes simulating applications highly relevant for Europe's science, industry and society. The DEEP System will realise a Cluster Booster Architecture that can cope with the limitations purported by Amdahl's Law. It will serve as proof-of-concept for a next-generation ...
Voir le projet

 18

 TERMINÉ 

Monitoring Atmospheric Composition and Climate -III (MACC-III)

Date du début: 1 août 2014, Date de fin: 31 août 2015,

MACC-III is the last of the pre-operational stages in the development of the Copernicus Atmosphere Service. Its overall institutional objective is to function as the bridge between the developmental precursor projects - GEMS, PROMOTE, MACC and MACC-II- and the Atmosphere Service envisaged to form part of Copernicus Operations.MACC-III will provide continuity of the atmospheric services provided by ...
Voir le projet

 39

 TERMINÉ 

EUropean DATa (EUDAT)

Date du début: 1 oct. 2011, Date de fin: 31 mars 2015,

... agencies that invest in research infrastructures and programmes of research, infrastructure operators and research communities who rely on the availability of data-management services, national data centres and providers of connectivity and, of course, the users who rely on the availability of data and services, innovators who add value to the raw results of scientific research.EUDAT is a three-y ...
Voir le projet

 28

 TERMINÉ 

Distributed Research Infrastructure for Hydro-Meteorology (DRIHM)

Date du début: 1 sept. 2011, Date de fin: 28 févr. 2015,

Predicting weather and climate and its impacts on the environment, including hazards such as floods and landslides, is still one of the main challenges of the 21st century, with significant societal and economic implications. At the heart of this challenge, as also suggested by the DRIHMS (Distributed Research Infrastructure for Hydro-Meteorology Study) project, lies the ability to have easy acce ...
Voir le projet

 12

 TERMINÉ 

Fuel Injector Research for Sustainable Transport (FIRST)

Date du début: 1 déc. 2010, Date de fin: 30 nov. 2014,

FIRST will deliver key enabling technologies for combustion emission reduction by developing improved design tools and techniques for modelling and controlling fuel sprays and soot.Aviation’s environmental impact must be reduced to allow sustainable growth to benefit European industry and society. This is captured in ACARE’s 2020 goals of reducing CO2 by 50%, NOx by 80% and in SRA1/2 proposed redu ...
Voir le projet

 22

 TERMINÉ 

Monitoring Atmospheric Composition and Climate Interim Implementation (MACC II)

Date du début: 1 nov. 2011, Date de fin: 31 juil. 2014,

MACC II (Monitoring Atmospheric Composition and Climate – Interim Implementation) is designed to meet the requirements that have been expressed for prototype operational GMES services for the atmospheric domain. From late-2011 MACC II will continue the operation and development of the GMES service lines established by the MACC project and prepare for its transition in 2014 to become the atmospheri ...
Voir le projet

 39

 TERMINÉ 
"The European integrating project COMBINE brings together research groups to advance Earth system models (ESMs) for more accurate climate projections and for reduced uncertainty in the prediction of climate and climate change in the next decades. COMBINE will contribute to better assessments of changes in the physical climate system and of their impacts in the societal and economic system. The pro ...
Voir le projet

 24

 TERMINÉ 

Flutter-Free Turbomachinery Blades (FUTURE)

Date du début: 1 juil. 2008, Date de fin: 30 juin 2013,

"FUTURE brings together European and international well reputed centres-of-excellence in order to reach major scientific & technical objectives in striving towards flutter-free turbomachine blades. By advancing the state-of-the-art in flutter prediction capabilities and design rules, the FUTURE project will lead to benefits in terms of decreased development cost, reduced weight and fuel consumptio ...
Voir le projet

 26

 TERMINÉ 

"Knowledge for Ignition, Acoustics and Instabilities" (KIAI)

Date du début: 1 mai 2009, Date de fin: 30 avr. 2013,

"For the time being, the European engine industry does not have at its disposal methodologies adapted to predict the unsteady behaviour of low NOx combustors. Consequently and in order to be able to set up the development of low NOx technologies, KIAI will deliver reliable unstationary CFD tools which will allow a deep comprehension of unsteady phenomena. The main objective of the KIAI project is ...
Voir le projet

 18

 TERMINÉ 

InfraStructure for the European Network for Earth System Modelling (IS-ENES)

Date du début: 1 mars 2009, Date de fin: 28 févr. 2013,

"IS-ENES will develop a Virtual Earth System Modelling Resource Centre (V.E.R.C.), integrating the European Earth system models (ESMs) and their hardware, software, and data environments. The overarching goal of this e-infrastructure is to further integrate the European climate modelling community, to help the definition of a common future strategy, to ease the development of full ESMs, to foster ...
Voir le projet

 20

 TERMINÉ 

Technologies Enhancement for Clean Combustion in Aero-engines (TECC-AE)

Date du début: 1 juil. 2008, Date de fin: 31 déc. 2012,

"Due to continuous efforts through past and ongoing European projects, lean combustion by means of internally staged injectors now appears to be the promising technology for obtaining the required emission reductions compatible with a sustainable growth of aviation transport. (cf ACARE 2020) Recognising that putting into service such a technology as soon as possible is the only way to effectively ...
Voir le projet

 18

 TERMINÉ 

GReener Aeronautics International Networking (GRAIN)

Date du début: 1 oct. 2010, Date de fin: 31 déc. 2012,

"Aerochina1&2 have been networking projects co-funded by FP7 and AVIC (China) and coordinated by CIMNE. Many of the GRAIN partners have participated in them. These collaborative projects gathered experts on the two Europe (13) and China (17) sides to foster cooperation and debate future trends in the field of integrated multi physics modeling, computer simulations and code validation, experimental ...
Voir le projet

 18

 TERMINÉ 
"The IMG4 project CRESCENDO addresses the Vision 2020 objectives for the aeronautical industry by contributing significantly to the fulfilment of three specific targets of the aeronautical industry’s Strategic Research Agenda. CRESCENDO will develop the foundations for the Behavioural Digital Aircraft (BDA), taking experience and results from VIVACE, and integrating these into a federative system ...
Voir le projet

 59

 TERMINÉ 

Limit cycles of thermo-acoustic oscillations in gas turbine combustors (LIMOUSINE)

Date du début: 1 oct. 2008, Date de fin: 30 sept. 2012,

"In LIMOUSINE multi-disciplinary research and training is provided to address the problem and provide tools to design and operate gas turbine engines in a robust way with a diversity of fuels and operation conditions. Their robustness is dependent on their design and operation however. The major risk of failure is due to mechanical failure of combustor components. This failure is most often caused ...
Voir le projet

 11

 TERMINÉ 

Massively Parallel Computations of Combustion and Emission Simulations (MyPlanet)

Date du début: 1 oct. 2008, Date de fin: 30 sept. 2012,

The MyPlanet collaborative initial training network represents a European initiative to train a new generation of engineers in the field of high performance computing applied to the numerical combustion simulation, energy conversion processes and related atmospheric pollution issues. Indeed, the project is based on the recognised lack on European level of highly skilled engineers that are equally ...
Voir le projet

 8

 TERMINÉ 

Aerodynamic loads estimation at extremes of the flight envelope (ALEF)

Date du début: 1 mai 2009, Date de fin: 30 avr. 2012,

"ALEF's objective is to enable the European aeronautical industry to create complete aerodynamic models of their aircraft based on numerical simulation approaches within the respective development processes. I.e. ALEF will kick-off a paradigm shift from greater confidence in experimentally measured loads data to greater confidence in computational results. Beyond the scope of ALEF this paradigm sh ...
Voir le projet

 20

 TERMINÉ 

Monitoring Atmospheric Composition and Climate (MACC)

Date du début: 1 juin 2009, Date de fin: 31 déc. 2011,

"MACC (Monitoring Atmospheric Composition and Climate) is designed to meet the requirements that have been expressed for the pilot Core GMES Atmospheric Service. The project has been prepared by the consortia of the FP6 project GEMS and the GSE project PROMOTE, whose core service lines will provide the starting point for MACC. From mid-2009 MACC will continue, improve, extend, integrate and valida ...
Voir le projet

 45

 TERMINÉ 

Common Metadata for Climate Modelling Digital Repositories (METAFOR)

Date du début: 1 mars 2008, Date de fin: 31 août 2011,

Climate science plays an increasingly important role for European policy-makers and private sector companies. Basic research and development of effective strategies to mitigate climate change and deal with its impact on society are required, involving a wide range of experts from multiple disciplines. These expert need to access climate data, in particular data from model projections for the next ...
Voir le projet

 12