Plus de 40 projets européens trouvés
Recherche sur 125080 projets européens
TERMINÉ
Molecular Tools for Nucleic Acid Manipulation for Biological Intervention (MMBio)
Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,
...t no single research grouping could provide. The incorporation of early-stage and later stag ebiotechnology enterprises ensures that commercialisation of methodologies as well as the drug development process is covered in this ITN. We hope that MMBio will train scientists able to understand both the biological problem and the chemistry that holds the possible solution and develop original experime ...
Voir le projet
13
Participants partenaires
TERMINÉ
Low Emissions Intensity Lime and Cement (LEILAC)
Date du début: 1 janv. 2016, Date de fin: 31 déc. 2020,
...easing, international competitiveness. LEILAC will develop, build and operate a 240 tonne per day pilot plant demonstrating Direct Separation calcining technology which will capture over 95% of the process CO2 emissions (which is 60 % of total CO2 emissions) from both industries without significant energy or capital penalty.Direct Separation technology uses indirect heating in which the process CO ...
Voir le projet
13
Participants partenaires
TERMINÉ
High Temparature concentrated solar thermal power plan with particle receiver and direct thermal storage (NEXT-CSP)
Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,
According to the Integrated Roadmap of the Set-plan, and to reach the new EU target of 27% of renewable energies in 2030, there is the need to rapidly expand the use of all renewable energy sources in Europe to accelerate the fight against global climate change. This requires the acceleration of development of new options that are emerging today, particularly, technologies that solve the key issue ...
Voir le projet
10
Participants partenaires
TERMINÉ
Improved energy and resource efficiency by better coordination of production in the process industries (CoPro)
Date du début: 1 nov. 2016, Date de fin: 30 avr. 2020,
The goal of CoPro is to develop and to demonstrate methods and tools for process monitoring and optimal dynamic planning, scheduling and control of plants, industrial sites and clusters under dynamic market conditions. CoPro will provide decision support to operators and managers and develop closed-loop solutions to achieve an optimally energy and resource efficient production. In most plants of t ...
Voir le projet
17
Participants partenaires
TERMINÉ
Sustainable Processes and Optimized Technologies for Industrially Efficient Water Usage (SPOTVIEW)
Date du début: 3 oct. 2016, Date de fin: 2 avr. 2020,
The objective of the SPOTVIEW project is to develop and demonstrate innovative, sustainable and efficient processes and technology components, in order to optimize the use of natural resources, especially water, in three industrial sectors (Dairy, Pulp and Paper and Steel) contributing to 44% of industrial water usage in EU. This resource optimization (including water, energy, raw materials and ad ...
Voir le projet
15
Participants partenaires
TERMINÉ
New process for efficient CO2 capture by innovative adsorbents based on modified graphene aerogels and MOF materials (GRAMOFON)
Date du début: 1 oct. 2016, Date de fin: 31 mars 2020,
...ing capture and regeneration of the material compared to liquid absorption. The key objectives of GRAMOFON projects are: (i) to develop and protoype a new energy and cost-competitive dry separation process for post-combustion CO2 capture based on innovative hybrid porous solids Metal organic frameworks (MOFs) and Graphene Oxide nanostructures.(ii) to optimize the CO2 desorption process by means of ...
Voir le projet
10
Participants partenaires
TERMINÉ
European Gram Negative Antibacterial Engine (ENABLE)
Date du début: 1 févr. 2014, Date de fin: 31 janv. 2020,
The intensive use and misuse of antibiotics has resulted in some level of antibiotic resistance in essentially all human bacterial pathogens. There is a growing concern that the loss of therapeutic options will present us with a post-antibiotic era where present and future medical advances are negated. Resistant bacteria dramatically reduce the possibilities of treating infections effectively, a ...
Voir le projet
42
Participants partenaires
TERMINÉ
Next GenerAtion MateriAls and Solid State DevicEs for Ultra High Temperature Energy Storage and Conversion (AMADEUS)
Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,
This project will investigate the next generation of materials and devices for latent heat thermal energy storage (LHTES) at ultra-high temperatures of up to 2000ºC, which are well beyond today's maximum operation temperatures of ~1000ºC. We will synthetize new phase change materials (PCMs) with latent heat in the range of 2-4 MJ/kg (an order of magnitude greater than that of typical salt-based PC ...
Voir le projet
7
Participants partenaires
TERMINÉ
Nano-Enabled Conducting Materials Accelerating Device Applicability (NECOMADA)
Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,
...s to address internet of things opportunities.The consortium will integrate materials development with end application requirements in terms of technical performance (thermal/electrical conductivity, processing conditions, materials integrity and adhesion) and unit cost of production to facilitate market adoption. The project will utilise and build on existing CPI pilot facilities (R2R print line ...
Voir le projet
14
Participants partenaires
TERMINÉ
INternational Smart Collaborative Open-access hybrid Printed Electronics pilot line (InSCOPE)
Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,
...cts at TRL6-7. It positions itself in between R&D and industry and deploys a service for validating potential H-TOLAE products. Manufacturing progresses beyond R&D level (TRL5 towards 6) by improving processes, functionality and reliability allowing sampling at high quality and in relevant numbers needed for industrial qualification (TRL 6-7). The applications addressed cover automotive, healthcar ...
Voir le projet
14
Participants partenaires
TERMINÉ
Tools and TECHNOlogies for Breakthrough in hEArt Therapies (TECHNOBEAT)
Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,
...EAT’s ultimate objectives are 1) to advance therapeutic scale cell production through innovative bioreactor technologies and novel cell monitoring tools, and 2) to develop regulatory compliant bioprocessing of innovative iPSC-based cardiac µ-tissue. The clinical translation of cardiac µ-tissue will require 3) the development and application of tools for improved cell delivery and longitudinal in ...
Voir le projet
8
Participants partenaires
TERMINÉ
High Temperature Solar-Heated Reactors for Industrial Production of Reactive Particulates (SOLPART)
Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,
The main objective of the SOLPART project is to develop, at pilot scale, a high temperature (950°C) 24h/day solar process suitable for particle treatment in energy intensive industries (e.g. cement or lime industries). The project aims at supplying totally or partially the thermal energy requirement for CaCO3 calcination by high temperature solar heat thus reducing the life cycle environmental imp ...
Voir le projet
10
Participants partenaires
TERMINÉ
Systematic Design and Testing of Advanced Rotating Packed Bed Processes and Phase-Change Solvents for Intensified Post-Combustion CO2 Capture (ROLINCAP)
Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,
ROLINCAP will search, identify and test novel phase-change solvents, including aqueous and non-aqueous options, as well as phase-change packed bed and Rotating Packed Bed processes for post-combustion CO2 capture. These are high-potential technologies, still in their infancy, with initial evidence pointing to regeneration energy requirements below 2.0 GJ/ton CO2 and considerable reduction of the e ...
Voir le projet
12
Participants partenaires
TERMINÉ
BIO-based products from FORestry via Economically Viable European Routes (BIOFOREVER)
Date du début: 1 sept. 2016, Date de fin: 31 août 2019,
...cially viable and sustainable value chains. Using a fast-track (3-year) and open innovation approach, BIOFOREVER teams up 14 leading industrial partners in feedstock supply, pre-treatment, downstream processing and producers of chemicals, food and specialties in order to rapidly progress commercialization of these value chains. Assessment of feedstock sustainability, customer perception and stake ...
Voir le projet
14
Participants partenaires
TERMINÉ
Systematic Models for Biological Systems Engineering Training Network (SyMBioSys)
Date du début: 1 sept. 2015, Date de fin: 31 août 2019,
...l and biological systems engineering research, these include four universities and two research centres; (ii) four industrial beneficiaries including key players in developing simulation software for process systems engineering, metabolic engineering and industrial biotechnology; (iii) three partner organisations from pharmaceutical, biotechnological and entrepreneurial sectors. SyMBioSys is commi ...
Voir le projet
11
Participants partenaires
TERMINÉ
Secure Management Platform for Shared Process Resources (SHAREBOX)
Date du début: 1 sept. 2015, Date de fin: 31 août 2019,
To pave the way forward for IS as a solution for more efficient processing and energy systems for the process industry, we will develop a secure ICT platform (SHAREBOX) for the flexible management of shared process resources that will provide plant operations and production managers with the robust and reliable information that they need in real-time in order to effectively and confidently share r ...
Voir le projet
17
Participants partenaires
TERMINÉ
Empowering Photonics through Regional Innovation Strategies in Europe (EPRISE)
Date du début: 1 janv. 2017, Date de fin: 30 juin 2019,
EPRISE project aims to promote and support Photonics as a KET with focus on Life Science applications in 4 target markets where Europe holds a leading position – Medical Technologies, Pharmaceuticals, Agriculture and Food. Companies developing photonics-based products for these markets face highly specific Go-to-Market challenges such as long time to market adoption, complex regulatory frameworks ...
Voir le projet
9
Participants partenaires
TERMINÉ
The Development of Medium- and Large-Scale Sustainable Manufacturing Process Platforms for Clinically Compliant Solid Core Nanopharmaceuticals (NANOFACTURING)
Date du début: 1 févr. 2015, Date de fin: 31 janv. 2019,
...logram quantities- providing large-scale and GMP production for clinical trials and nanomedicine translation. The NANOFACTURING project, through a consortium of 9 partners, will develop the synthetic processes, process control methods, analytical assays for QA/QC, functional specifications, and best practices, interfacing existing R&D centres of excellence, transfer organisations and private GMP m ...
Voir le projet
10
Participants partenaires
TERMINÉ
Bringing flexible organic electronics to pilot innovation scale (PI-SCALE)
Date du début: 1 janv. 2016, Date de fin: 31 déc. 2018,
...nd cost requirements of end users. Together with end-users for various markets, such as automotive and designer luminaires, PI-SCALE will demonstrate the capabilities of this pilot line doing process optimisation for product demonstrators to enable cost efficient production and facilitate an effective market introduction. In addition PI-SCALE will include a number of outreach activities to active ...
Voir le projet
14
Participants partenaires
TERMINÉ
Enabling CLoud Orchestration, Performance and Cost Efficiency Tools for QoE Enhancement and Provider Ranking (CloudPerfect)
Date du début: 1 déc. 2016, Date de fin: 30 nov. 2018,
...cisive step for migration and owners of SaaS to be unable to present performance vs cost tradeoffs to their customers when acting as IaaS customers. CLOUDPERFECT aims at delivering a set of tools and processes that will enable a) Cloud providers to enhance the stability and performance effectiveness of their infrastructures, through modelling/understanding of the overheads, optimal groupings of co ...
Voir le projet
8
Participants partenaires
TERMINÉ
Factories of the Future Resources, Technology, Infrastructure and Services for Simulation and Modelling 2 (Fortissimo 2)
Date du début: 1 nov. 2015, Date de fin: 31 oct. 2018,
Fortissimo 2 will drive the uptake of advanced modelling, simulation and data analytics by European engineering and manufacturing SMEs and mid-caps. Such an uptake will deliver improved design processes, better products and services, and improved competitiveness. For the European Union as a whole this means improved employment opportunities and economic growth.The importance of advanced ICT to the ...
Voir le projet
38
Participants partenaires
TERMINÉ
Activating Value Chains for EU leadership in FORMulation Manufacturing 4.0 (AceForm4.0)
Date du début: 1 oct. 2016, Date de fin: 30 sept. 2018,
... barriers and opportunities offered by Industry 4.0 and the drive towards a Circular Economy. Whilst a number of the challenges faced by manufacturers of formulated products are shared with the wider process industry, their nature is very different. Being often micro-heterogeneous, formulated products tend to be unstable and rely on a judicious selection of ingredients and fine-tuned production me ...
Voir le projet
7
Participants partenaires
TERMINÉ
ECO-FRIENDLY CERAMIC MEMBRANE BIOREACTOR (MBR) BASED ON RECYCLED AGRICULTURAL AND INDUSTRIAL WASTES FOR WASTE WATER REUSE (REMEB)
Date du début: 1 sept. 2015, Date de fin: 31 août 2018,
... start the commercialization of the technology, once the project will be finished. The low cost recycled ceramic membranes of the project are based on residues obtained in agricultural and industrial processes (sub-products), such as olive oil solid wastes, marble working wastes and chamotte from fired scrap, in addition to the typical raw materials used in the ceramic tile industry. The project a ...
Voir le projet
12
Participants partenaires
TERMINÉ
Predictable Flexible Molten Salts Solar Power Plant (PreFlexMS)
Date du début: 1 juin 2015, Date de fin: 31 mai 2018,
...allow optimal management of the energy storage to maximize revenues while respecting constraints/commitments (e.g. to the grid). Towards 1), an innovative design approach is proposed, integrating process and equipment design with dynamic simulation of the system. Proven technologies in separate fields (molten salt ; once-through steam generator ; optimum control) will be for the first time integra ...
Voir le projet
16
Participants partenaires
TERMINÉ
Seven Nanometer Technology (SeNaTe)
Date du début: 1 avr. 2015, Date de fin: 31 mars 2018,
...admap on real devices in the Advanced Patterning Center at imec using innovative device architecture and comprising demonstration of a lithographic platform for EUV and immersion technology, advanced process and holistic metrology platforms, new materials and mask infrastructure.A lithography scanner will be developed based on EUV technology to achieve the 7nm module patterning specification. Metr ...
Voir le projet
41
Participants partenaires
TERMINÉ
FAST industrialisation by CAtalysts Research and Development (FASTCARD)
Date du début: 1 janv. 2014, Date de fin: 31 déc. 2017,
...valuation of the impact of diverse and variable bio-feedstocks on catalyst performance;-Addressing major challenges impacting on the efficiency and implementation of 4 key catalytic steps in biobased processes:• Hydrotreating (HT) and co-Fluid Catalytic Cracking forming the pyrolysis liquid value chain for near term implementation in existing refining units as a timely achievement of the 20-20-20 ...
Voir le projet
14
Participants partenaires
TERMINÉ
Innovative Nanoformulation of Antimicrobial Peptides to Treat Bacterial Infectious Diseases (FORMAMP)
Date du début: 1 déc. 2013, Date de fin: 30 nov. 2017,
Resistance to traditional antibiotics is a rapidly increasing problem that in a few years could make infections impossible to treat and bring the state of medical care back to the pre-antibiotic era from the beginning of the last century. Antimicrobial peptides (AMPs) have a huge potential as new therapeutics against infectious diseases as they are less prone to induce resistance due to their fast ...
Voir le projet
18
Participants partenaires
TERMINÉ
Up-Scaled Production of Graphene Reinforced Thermosetting Polymers for Composite, Coating and Adhesive Applications (PolyGraph)
Date du début: 1 nov. 2013, Date de fin: 31 oct. 2017,
... in the strength, stiffness, toughness, electrical conductivity and thermal properties; such as fibre-reinforced composite resins, coatings and adhesives.The ultimate aim of PolyGraph is to develop a process in which graphene can be produced and dispersed “in-situ” within thermosetting polymer resins, using relatively inexpensive expanded graphite as a starting material.We propose a staged approac ...
Voir le projet
14
Participants partenaires
TERMINÉ
Pilot manufacturing line for production of highly innovative materials (PILOTMANU)
Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,
The vision of PilotManu is the upscale of the current mechanical alloying technological facility into a powder manufacturing pilot line by further developing existing IPR-covered results owned by the SMEs in the consortium related to mechanical alloying technology and to innovative powder materials for different applications.The baseline technology that will be upscaled from a technological facili ...
Voir le projet
10
Participants partenaires
TERMINÉ
re-conceptualize shopping malls from consumerism to energy conservation (COMMONENERGY)
Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,
...approach. The main concept to advance the state-of-the-art is the shift from single-action refurbishment to deep retrofitting, with a systemic performance-driven approach including: integrated design process guidelines, integrative modelling environment, energy-economic evaluation tools, lean construction and management procedures, continuous commissioning approach, environmental and socio-cultura ...
Voir le projet
23
Participants partenaires
TERMINÉ
Smart Tanks for Space (SMARTTS)
Date du début: 1 janv. 2017, Date de fin: 30 juin 2017,
... for end-of-life disposal compliance. Further, fluid slosh presents a challenging control problem - reducing pointing accuracy and introducing potential resonances that threaten platform safety.Atout Process Ltd. (‘Atout’) is a European SME founded in 2010 to develop innovative products based on non-intrusive electromagnetic imaging and measurement techniques. Atout has commercialised a novel moni ...
Voir le projet
1
Participant partenaire
TERMINÉ
OPERATIONALISATION OF NATURAL CAPITAL AND ECOSYSTEM SERVICES: FROM CONCEPTS TO REAL-WORLD APPLICATIONS (OPENNESS)
Date du début: 1 déc. 2012, Date de fin: 31 mai 2017,
Despite improved understanding of the links between ecosystem health, provision of ecosystem services and human well-being, further conceptual and empirical work is needed to make the ideas of ecosystem services (ESS) and natural capital (NC) operational. OpenNESS will therefore develop innovative and practical ways of applying them in land, water and urban management: it will identify how, where ...
Voir le projet
39
Participants partenaires
TERMINÉ
High value-added chemicals and BIoreSIns from alGae biorefineries produced from CO2 provided by industrial emissions (BISIGODOS)
Date du début: 1 nov. 2013, Date de fin: 30 avr. 2017,
...plications, starting from algae biomass fed directly with CO2 from industrial emissions (cement, steel factory, thermal power plants, etc.) as a raw material that is cost-effective and renewable. The process is assisted by solar radiation, nutrients and sea water microalgae. This approach is based on the technology developed by the Partner Biofuel Systems (BFS) to produce bio-oil. In order to deve ...
Voir le projet
18
Participants partenaires
TERMINÉ
Sustainable Technologies for Calcined Industrial Minerals in Europe (STOICISM)
Date du début: 1 janv. 2013, Date de fin: 31 déc. 2016,
...and manufacturing industries.The main objective of STOCISM is to enhance the competitiveness of the European industrial minerals industry by developing cleaner, more energy efficient extraction and processing technologies. STOICISM is an industry-led project with a specific focus on calcined industrial minerals which are presently energy intensive to produce. Most calcining uses the direct combu ...
Voir le projet
17
Participants partenaires
TERMINÉ
Innovative hybrid MBR-(PAC-NF) systems to promote water reuse (aWARE)
Date du début: 1 janv. 2013, Date de fin: 30 nov. 2016,
...hnical feasibility and economic and environmental advantages of two different technologies as advanced treatments for wastewater and reclamation facilities.
The project proposes an innovative hybrid process using membrane bioreactors (MBR), powdered activated carbon (PAC) and nanofiltration (NF) to enable re-use of wastewater. It will experiment with MBR-PAC-NF configurations - including PAC dosa ...
Voir le projet
5
Participants partenaires
TERMINÉ
Innovative plasma based transformation of food waste into high value graphitic carbon and renewable hydrogen (PLASCARB)
Date du début: 1 déc. 2013, Date de fin: 30 nov. 2016,
...into the EU from regions which are often politically unstable or competitive. PlasCarb will integrate an established technology (anaerobic digestion) with innovative, low temperature microwave plasma processing and leading edge control of carbon morphology and purification. This project will extend beyond current Best Available Techniques (BAT) in the valorisation of food waste of anaerobic digest ...
Voir le projet
8
Participants partenaires
TERMINÉ
Enabling the drying process to save energy and water, realising process efficiency in the dairy chain (ENTHALPY)
Date du début: 1 nov. 2013, Date de fin: 31 oct. 2016,
Saving energy and water in the Dairy industry, by introducing innovations in the processing plant. Namely RF heating, solar thermal energy, mono-disperse atomising, dryer modelling, inline monitoring, cleaning with enzymes and membrane technology. With these technologies energy and water loops are closed instead of lost in the plant. These technologies will be demonstrated in pilot facilities.The ...
Voir le projet
19
Participants partenaires
TERMINÉ
Preclinical development of drugs and drug delivery technology for the treatment of inherited photoreceptor degeneration (DRUGSFORD)
Date du début: 1 sept. 2012, Date de fin: 31 août 2016,
Dysregulation of cGMP is a pathological hallmark of inherited retinal degenerations (RD) affecting photoreceptors, the sensory cells of the retina. These RDs, including Retinitis Pigmentosa, Lebers Congenital Amaurosis, and Achromatopsia, are major causes of blindness, affecting approximately one in every 2000 individuals worldwide, and remain without effective treatment. In photoreceptors, cGMP i ...
Voir le projet
6
Participants partenaires
TERMINÉ
Advanced Materials and Electric Swing Adsorption Process for CO2 Capture (MATESA)
Date du début: 1 sept. 2013, Date de fin: 31 août 2016,
...utilization of commercially available materials was employed in the former evaluations. New materials with targeted properties to capture CO2 from flue gases can improve the performance of adsorption processes significantly.The vision of MATESA is to develop an innovative post-combustion capture termed as Electric Swing Adsorption (ESA). The utilization of hybrid CO2 honeycomb monoliths with high- ...
Voir le projet
12
Participants partenaires
TERMINÉ
Factories of the Future Resources, Technology, Infrastructure and Services for Simulation and Modelling (FORTISSIMO)
Date du début: 1 juil. 2013, Date de fin: 30 juin 2016,
The importance of advanced simulation to the competitiveness of both large and small companies is well established. The principal objective of Fortissimo is to enable European manufacturing, particularly small to medium enterprises (SMEs), to benefit from the efficiency and competitive advantage inherent in the use of simulation. However, the simulation of, for example, high-pressure gas cylinders ...
Voir le projet