Rechercher des projets européens

18 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Design for Resource and Energy efficiency in cerAMic kilns (DREAM)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

The DREAM project aims to design, develop and demonstrate a radically improved architecture for ceramic industrial furnaces, characterised by optimised energy consumption, reduced emissions, and lower operating costs compared to currently available technological solutions. This will be obtained by substantially enhancing specific furnace parts (control system, refractories, emissions abatement sys ...
Voir le projet

 11

 TERMINÉ 

Distributed control and simulAtion platform to support an Ecosystem of DigitAL aUtomation developerS (Daedalus)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

Daedalus is conceived to enable the full exploitation of the CPS concept of virtualized intelligence, through the adoption of a completely distributed automation platform based on IEC-61499 standard, fostering the creation of a Digital Ecosystem that could go beyond the current limits of manufacturing control systems and propose an ever-growing market of innovative solutions for the design, engine ...
Voir le projet

 14

 TERMINÉ 

Industrial Thermal Energy Recovery Conversion and Management (I-ThERM)

Date du début: 1 oct. 2015, Date de fin: 31 mars 2019,

Waste heat recovery systems can offer significant energy savings and substantial greenhouse gas emission reductions. The waste heat recovery market is projected to exceed €45,0 billion by 2018, but for this projection to materialise and for the European manufacturing and user industry to benefit from these developments, technological improvements and innovations should take place aimed at improvin ...
Voir le projet

 13

 TERMINÉ 

Multi-disciplinArY integrated simulAtion and forecasting tools, empowered by digital continuity and continuous real-world synchronization, towards reduced time to production and optimization (MAYA)

Date du début: 1 oct. 2015, Date de fin: 30 sept. 2018,

MAYA aims at developing simulation methodologies and multidisciplinary tools for the design, engineering and management of CPS-based (Cyber Physical Systems) Factories, in order to strategically support production-related activities during all the phases of the factory life-cycle, from the integrated design of the product-process- production system, through the optimization of the running factory, ...
Voir le projet

 11

 TERMINÉ 

Human-mimetic approach to the integrated monitoring, management and optimization of a symbiotic cluster of smart production units (SYMBIOPTIMA)

Date du début: 1 sept. 2015, Date de fin: 31 août 2018,

Improvements of the overall sustainability of process industries from an economic, environmental and social point of view require the adoption of a new industrial symbiosis paradigm - the human-mimetic symbiosis - where critical resources (materials, energy, waste and by-products) are coordinated among multiple autonomous Production Units organized in industrial clusters.SYMBIOPTIMA will improve E ...
Voir le projet

 15

 TERMINÉ 

Movement Assisting Devices: Manufacturing of personalized Kineto-Dynamics parts and products for workers, elderly and children (MovAiD)

Date du début: 1 sept. 2015, Date de fin: 31 août 2018,

I - Over forty million workers in the EU are affected by work-place related musculoskeletal disorders, as a result of working in painful or tiring positions and handling heavy loads with repetitive hand or arm movements.II - The aging population is growing fast and approaching the mean age where loss of function and hence loss of mobility is to begin. In addition to diabetic and obesity, in 5 year ...
Voir le projet

 13

 TERMINÉ 

Borealis – the 3A energy class Flexible Machine for the new Additive and Subtractive Manufacturing on next generation of complex 3D metal parts. (BOREALIS)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2017,

Borealis project presents an advanced concept of machine for powder deposition additive manufacturing and ablation processes that integrates 5 AM technologies in a unique solution. The machine is characterized by a redundant structures constituted by a large portal and a small PKM enabling the covering of a large range of working cube and a pattern of ejective nozzles and hybrid laser source targe ...
Voir le projet

 16

 TERMINÉ 

ADvanced Digital technologies and virtual engineering for mini-Factories (ADDFACTOR)

Date du début: 1 sept. 2013, Date de fin: 31 déc. 2016,

In today globalized world, companies are trying to remain competitive through the adoption of a strategy where high quantity production of goods is the leverage to reduce costs.By negating this approach, ADDFactor proposes the “Mini-factories” concept, which is conceived to be an innovative solution for most of the actors involved in the whole supply chain: the relationship between retailers and t ...
Voir le projet

 16

 TERMINÉ 

MANufacturing through ergonoMic and safe Anthropocentric aDaptive workplacEs for context aware factories in EUROPE (MAN-MADE)

Date du début: 1 sept. 2013, Date de fin: 31 août 2016,

"The MAN-MADE project aims at defining new socially sustainable workplaces where the human dimension is a key cornerstone. Workers are foreseen at the centre of the factory, on the one hand, in terms of workplace adaptation (and production planning, at large) to skills, expertise and characteristic of each single worker and, on the other hand, in terms of capability to make the most out of worker’ ...
Voir le projet

 9

 TERMINÉ 

white room based on Reconfigurable robotic Island for optoelectronics (whiteR)

Date du début: 1 sept. 2013, Date de fin: 31 août 2016,

The young optoelectronic industry has critical mass and already impacts for more than the 10% on the European economy, employing 290 000 people and guarantees a stable double digit growth in current and coming years. Europe is playing a leading role in R&D (>1,000 research organization active) and is still able to face Far East and American competitors in manufacturing. white’R is a necessary acti ...
Voir le projet

 13

 TERMINÉ 

Local flexible manufacturing of green personalized furniture Close To the Customer in time, space and cost (CTC)

Date du début: 1 juin 2013, Date de fin: 31 mai 2016,

"The CTC project aims to support European Industry to adapt to global competitive pressures by developing methods and innovative enabling technologies towards local flexible manufacturing of green personalized products close to the customer in terms of features offered, place of fabrication, time to deliver, and cost. This vision is implemented and demonstrated within an European industrial sector ...
Voir le projet

 10

 TERMINÉ 

Factory ECO-friendly and energy efficient technologies and adaptive autoMATION solutions (FACTORY-ECOMATION)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2015,

The production landscape is changing. Traditionally, energy costs represented a small part of the production expenses, meaning that the design of production facilities usually neglected efficient energy usage in favour of maximization of production throughput; the energy consumption of factories has been always high, but energy cost has increased dramatically in the last decades, pushing industria ...
Voir le projet

 12

 TERMINÉ 

Exploiting Factory of the Future projects through Enhanced Clustering towards Technology Transfer, Innovation and Value creation for European industry. (EFFECTIVE)

Date de fin: 1 janv. 2015,

The EFFECTIVE project foresees the following objectives:• analyse business trends and market prospects, and perform reviews & workshops to get a consistent set of information for clustering and exploitation of FoF projects activities and results;• develop and industrial exploitation framework for the promotion and transfer of FoF projects activities and results, and structure networks & alliances ...
Voir le projet

 4

 TERMINÉ 

Customized Green, Safe, Healthy and Smart Work and Sports Wear (MyWear)

Date du début: 1 déc. 2011, Date de fin: 30 nov. 2014,

The MY Wear project will develop a new generation of customised, green, safe, healthy and smart work wear and sport wear products for elderly, obese, diabetics and disabled. Therefore a specific reference framework will be set up based on an innovative data integration platform gathering consumers data, during both products orders and usage, for customisation and extended services providing comfor ...
Voir le projet

 10

 TERMINÉ 

Development of new technologies for the flexible and eco-efficient production of customized healthy clothing, footwear and orthotics for consumers with highly individualised needs (FASHION-ABLE)

Date du début: 1 nov. 2011, Date de fin: 31 oct. 2014,

FASHION-ABLE project aims at providing the European innovative and customization-concerned SMEs with the technological means that will enable the agile and eco-efficient production of personalised products addressing the complex individualised needs of growing market niches out of the scope of mass-produced goods in terms of health and performance. FASHION-ABLE vision is to provide the innovative ...
Voir le projet

 14

 TERMINÉ 

Customer-oriented and eco-friendly networks for healthy fashionable goods (CoreNet)

Date du début: 1 juin 2010, Date de fin: 31 mai 2013,

The objective of CoReNet is to address consumer needs and expectations of wide range of European citizens as well as specific target groups - such as elderly, obese, disabled, or diabetic persons -by supplying small series of functional and fashionable clothes and footwear of high quality, affordable price and eco-compatibility. Therefore the European Textile, Clothing and Footwear Industry wil ...
Voir le projet

 14

 TERMINÉ 

Framework of Integrated Technologies for User Centred Products (FIT4U)

Date du début: 1 juil. 2009, Date de fin: 30 juin 2012,

Ongoing social and economic globalization processes will offer major challenges on the global market for consumer oriented manufacturing sectors. In particular, the shoes and gloves markets are expected to grow by more than 25% within the next 5 years, and the market niches for high value added shoes and gloves are expected to grow even faster. As a consequence there is today a unique opportunity ...
Voir le projet

 13

 TERMINÉ 

Innovative networks of SMEs for complex products manufacturing (Net-Challenge)

Date du début: 1 juin 2009, Date de fin: 29 févr. 2012,

European SMEs will have to adopt new business models and to establish dynamic and non-hierarchical networks to respond to market opportunities, assuring quick response, fast time to market, differentiated offerings and competitive prices. Sustainability for SMEs will be found in high-variety low-volume businesses, related with complex products manufacturing. However, there are currently no proven ...
Voir le projet

 15