Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

European Research Infrastructure supporting Smart Grid Systems Technology Development, Validation and Roll Out (ERIGrid)

Date du début: 1 nov. 2015, Date de fin: 30 avr. 2020,

Renewable energy sources are key enablers to decrease greenhouse gas emissions and to cope with the anthropogenic global warming. The intermittent behaviour of them and their limited storage capabilities present new challenges to power system operators in maintaining power quality and reliability. However, the increased availability of advanced automation and communication technologies has also pr ...
Voir le projet

 19

 TERMINÉ 

Automation as accepted and trustful teamMate to enhance traffic safety and efficiency (AutoMate)

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

Automation in passenger cars is constantly increasing. In order to leverage the introduction of highly automated vehicles to the market and to fully exploit the automation’s potential to improve traffic safety and efficiency the careful design of the human-machine interaction is of utmost importance. Human drivers will remain part of the system for a long time. The vision of AutoMate is a novel dr ...
Voir le projet

 10

 TERMINÉ 

Trillium Bridge II - Reinforcing the Bridges and Scaling up EU/US Cooperation on Patient Summary (Trillium II)

Date du début: 1 janv. 2017, Date de fin: 30 juin 2019,

Trillium-II steps forward with an outstanding consortium to further advance global Electronic Health Record (EHR) interoperability. Activities surrounding the International Patient Summary (IPS) standards can nurture digital health innovation, lower trade barriers, and advance patient safety & trust, bridging the gap between strategic intent and capability for action by Standards Development Organ ...
Voir le projet

 21

 TERMINÉ 

European Initiative to Enable Validation for Highly Automated Safe and Secure Systems (ENABLE-S3)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2019,

ENABLE-S3 will pave the way for accelerated application of highly automated and autonomous systems in the mobility domains automotive, aerospace, rail and maritime as well as in the health care domain. Virtual testing, verification and coverage-oriented test selection methods will enable validation with reasonable efforts. The resulting validation framework will ensure Europeans Industry competiti ...
Voir le projet

 76

 TERMINÉ 

Safe and secure mixed-criticality systems with low power requirements (SAFEPOWER)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2018,

Critical Real-Time Embedded Systems (CRTES) such as railway, aerospace, automotive and energy generation systems face a disruptive challenge caused by the massive irruption of mixed-criticality systems based on multicore processors. At the same time low-power is an intensifying demand in many market segments, a competitive advantage for CRTES that have to operate with limited energy (e.g., batter ...
Voir le projet

 9

 TERMINÉ 

Modular Microserver DataCentre (M2DC)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2018,

Modular Microserver DataCentre (M2DC) will investigate, develop and demonstrate (Technology Readiness Level 7) a modular, highly-efficient, cost-optimized server architecture composed of heterogeneous microserver computing resources, being able to be tailored to meet requirements from various application domains such as image processing, cloud computing or even HPC. To achieve this objective, M2DC ...
Voir le projet

 14

 TERMINÉ 

EU eHealth Interoperability Conformity Assessment Scheme (EURO-CAS)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2018,

EURO-CAS, European eHealth Interoperability Conformity Assessment Scheme aims at maintaining and developing the adoption and take-up of testing the interoperability of ICT solutions against identified eHealth standards and profiles defined in the eHealth European Interoperability Framework (eEIF). The key deliverable is a sustainable Conformity Assessment Scheme (CAS) for Europe. Based on recommen ...
Voir le projet

 16

 TERMINÉ 

Integrated Components for Complexity Control in affordable electrified cars (3Ccar)

Date du début: 1 juin 2015, Date de fin: 31 mai 2018,

The 3Ccar project will provide highly integrated ECS Components for Complexity Control in thereby affordable electrified cars. The new semiconductors for Complexity management (Control, reduction) will offer the next level of energy efficiency in transportation systems.3Ccar’s impact is maximizing pragmatic strategy: Use semiconductor technology innovations to manage functionality & complexity inc ...
Voir le projet

 47

 TERMINÉ 

EfficienSea 2 - Efficient, Safe and Sustainable Traffic at Sea (EfficienSea 2)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2018,

The trend in navigational accidents no longer appears to decrease. In a Formal Safety Assessment (IMO NAV59-6, Annex 1) 5.544 navigational and 7.275 other accidents resulted in the loss of 6.264 lives (2001-2010). The coincide of EU policies on safer and more efficient waterborne operations and in particular the e-maritime initiative with IMO’s strategy for e-navigation opens a unique window of op ...
Voir le projet

 32

 TERMINÉ 

CPS Engineering Labs - expediting and accelerating the realization of cyber-physical systems (CPSELabs)

Date du début: 1 févr. 2015, Date de fin: 31 janv. 2018,

Smart cyber-physical systems (CPS) are considered to be the next revolution in ICT with lots of game-changing business potential for integrated services and products.Mastering the engineering of complex and trustworthy CPS is key to implementing CPS-based business models. Current CPS, however, are often engineered and maintained at very high cost and sometimes with unknown risks, and recent techno ...
Voir le projet

 11

 TERMINÉ 

A FRAMEWORK FOR USER CENTRED PRIVACY AND SECURITY IN THE CLOUD (CLARUS)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2017,

Although cloud computing offers many benefits, security issues such as confidentiality and privacy are still major concerns to those intending to migrate to the cloud. Traditional cloud security has been based on assurance to customers that cloud providers follow sound security practices. As a result, current security mechanisms are commonly located within the cloud platform, hence compelling cust ...
Voir le projet

 10

 TERMINÉ 

European Liaison on Electricity Committed Towards long-term Research Activities for Smart Grids (ELECTRA)

Date du début: 1 déc. 2013, Date de fin: 30 nov. 2017,

The ELECTRA Integrated Research Programme on Smart Grids (ELECTRA) brings together the partners of the EERA Joint Programme on Smart Grids (JP SG) to reinforce and accelerate Europe’s medium to long term research cooperation in this area and to drive a closer integration of the research programmes of the participating organisations and of the related national programmes. ELECTRA’s joint research a ...
Voir le projet

 23

 TERMINÉ 

Embedded Multi-Core Systems for Mixed Criticality Applications in Dynamic and Changeable Real-Time Environments (EMC2)

Date du début: 1 avr. 2014, Date de fin: 30 juin 2017,

Embedded systems are the key innovation driver to improve almost all mechatronic products with cheaper and even new functionalities. Furthermore, they strongly support today's information society as inter-system communication enabler.Consequently boundaries of application domains are alleviated and ad-hoc connections and interoperability play an increasing role. At the same time, multi-core and ma ...
Voir le projet

 101

 TERMINÉ 

Towards Cyber-Physical Systems Engineering Tools Interoperability Standardisation (CP-SETIS)

Date du début: 1 mars 2015, Date de fin: 28 févr. 2017,

CPS require multiple engineering competences across various engineering disciplines. The development of such systems is a huge challenge, also because of the heterogeneity of engineering tools involved in development platforms across the development lifecycle. In order to overcome this challenge, past and on-going EU research projects have developed the basis for an International Open Standard for ...
Voir le projet

 9

 TERMINÉ 

Modelling Reliability under Variability (MoRV)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2016,

While feature sizes are continuously scaled towards atomic dimensions, industry is increasingly confronted with unexpected physical artefacts to be considered at each new technology node. Among these, process variation and parameter degradation lead to reliability concerns impacting integrated circuit design at all abstraction levels. As variation and degradation may become a limiting factor for f ...
Voir le projet

 7

 TERMINÉ 

Holistic Human Factors and System Design of Adaptive Cooperative Human-Machine Systems (HOLIDES)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2016,

HoliDes addresses development and qualification of Adaptive Cooperative Human-Machine Sys-tems (AdCoS) where many humans and many machines act together, cooperatively, in a highly adaptive way. They adapt to each other and to the context to guarantee fluent and cooperative task achievement. Such systems with higher levels of automation are urgently needed to enhance safety and to increase the conf ...
Voir le projet

 32

 TERMINÉ 

Cooperative dynamic formation of platoons for safe and energy-optimized goods transportation (COMPANION)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2016,

The objective of the project is to develop co-operative mobility technologies for supervised vehicle platooning, in order to improve fuel efficiency and safety for goods transport. The potential social and environmental benefits inducted by heavy-duty vehicle platoons (or road trains) have been largely proven. However, until now, the creation, coordination, and operation of such platoons have been ...
Voir le projet

 8

 TERMINÉ 

Design of embedded mixed-criticality CONTRol systems under consideration of EXtra-functional properties (CONTREX)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2016,

Description CONTREX (Design of embedded mixed-criticality CONTRol systems under consideration of EXtra-functional properties)Abstract – Up to now mission & safety critical services of Systems of Systems (SoS) have been running on dedicated and often custom designed Hardware/Software platforms. In the near future such systems will be accessib ...
Voir le projet

 15

 TERMINÉ 

Developing Hardware and Design Methodologies for Heterogeneous Low Power Field Programmable Servers (FiPS)

Date du début: 1 sept. 2013, Date de fin: 31 août 2016,

The goal of this project is to reduce the power performance ratio within data-centres by improving the usability and usefulness of FPGAs, embedded CPU (eCPU), GPUs and multi/manycore accelerators in high-performance and low-power heterogeneous computing servers. We target applications between traditional super computing tasks (where huge amount of man-power can be spent for manual algorithm optimi ...
Voir le projet

 10

 TERMINÉ 

Applying Pilot Models for Safer Aircraft (A-PiMod)

Date du début: 1 sept. 2013, Date de fin: 31 août 2016,

The A-PiMod proposal addresses improved flight safety by proposing a new approach to human centred cockpit design, which expands the understanding of the human factor in joint human-machine system, taking into account increasing levels of operational complexity and new operational concepts (SESAR). The project will advance concepts for a fully adaptive and human centered automation, through the in ...
Voir le projet

 8

 TERMINÉ 

Critical System Engineering Acceleration (CRYSTAL)

Date du début: 1 mai 2013, Date de fin: 31 juil. 2016,

CRYSTAL aims at fostering Europe’s leading edge position in embedded systems engineering in particular regarding quality and cost effectiveness of safety-critical embedded systems and architecture platforms.Its overall goal is to enable sustainable paths to speed up the maturation, integration, and cross-sectoral reusability of technological and methodological bricks of the factories for safety-cr ...
Voir le projet

 70

 TERMINÉ 

Transatlantic CPS Summit (CPS Summit)

Date du début: 1 févr. 2015, Date de fin: 31 juil. 2016,

Cyber-physical systems (CPS) are a core enabling technology for securing economic leadership in embedded systems and ICT, having an enormous social and economic importance, and making decisive contributions to societal challenges. The EU and the US face common challenges to push forward the limits of the science for engineering CPS, creating a favorable environment for strategic and pre-competitiv ...
Voir le projet

 6

 TERMINÉ 

Distributed Intelligence for Cost-Effective and Reliable Distribution Network Operation (DISCERN)

Date du début: 1 févr. 2013, Date de fin: 30 avr. 2016,

As the patterns of power generation and distribution are rapidly changing in Europe towards a highly dispersed and volatile system, Distribution System Operators need to completely change traditional ways of grid operations. Currently developed solutions to increase the intelligence of medium and low voltage grids to cope with this task are often highly specialized, non-replicable and therefore no ...
Voir le projet

 13

 TERMINÉ 

Model-based Cooperative and Adaptive Ship-based Context Aware Design (CASCADe)

Date du début: 1 janv. 2013, Date de fin: 31 déc. 2015,

The development of ship bridge systems is characterized by being non-harmonious and far from guaranteed to be of optimal design for the actual users of them. Existing regulations for system and procedure design are disconnected and defined on a level which is not informative for bridge design. Research has shown clearly, that in many cases, accidents and incidents were caused by human error due to ...
Voir le projet

 7

 TERMINÉ 

TRustworthy Embedded systems for Secure Cloud Computing Applications (TRESCCA)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2015,

Cloud Computing is an inevitable trend. In the near future almost every consumer electronics device will be connected to an ecosystem of third-party partners providing payment systems, streamed content, etc. However, a whole field of cloud services still lacks solutions because of security issues. Cloud operators and their end users (individuals, companies, etc.) do not always trust each other. As ...
Voir le projet

 7

 TERMINÉ 

Scalable, Standard based Interoperability Framework for Sustainable Pro-active Post Market Safety Studies (SALUS)

Date du début: 1 févr. 2012, Date de fin: 30 avr. 2015,

Pre-approval clinical trials cannot possibly ensure that a drug will not have disastrous side effects once it arrives on the market. Post-approval safety data gathering was put in place to address this problem, but as implemented, it has not proven to be as effective as hoped. This is due to the fact that, current post market safety studies largely depend on the submission of spontaneous case repo ...
Voir le projet

 10

 TERMINÉ 

Designing for Adaptability and evolutioN in System of systems Engineering (DANSE)

Date du début: 1 nov. 2011, Date de fin: 31 janv. 2015,

Systems of Systems consist of collections of (possibly independent, pre-existing, geographically distributed and following their own goals) constituent systems whose behaviours are coordinated to provide services and additional value with respect to their original intended operations. This kind of entities offer severe technical, management, and political challenges as witnessed by energy blackout ...
Voir le projet

 11

 TERMINÉ 

Combined Model-based Analysis and Testing of Embedded Systems (MBAT)

Date du début: 1 nov. 2011, Date de fin: 31 déc. 2014,

"One of the most important strategic sectors in which Europe is developing, integrating and delivering high-quality products is the transportation domain. Here, high-class safety-related products as e.g. airplanes, cars and trains have a huge market impact. More and more of the market value of these vehicles is gained by embedded systems inside these products, and the number and importance of thes ...
Voir le projet

 42

 TERMINÉ 

ICT-enabled Wearable Artificial Kidney and Personal Renal Care System (NEPHRON+)

Date du début: 1 avr. 2010, Date de fin: 31 déc. 2014,

Description Renal patients can stay at home with wearable, artificial kidney.NEPHRON+ aims to provide a major leap forward in renal care: The project experts are developing a wearable artificial kidney for on-body blood purification - a next generation, integrated solution for personalized treatment and management of patients with chronic ...
Voir le projet

 10

 TERMINÉ 

AALIANCE2 - Next Generation European Ambient Assisted Living Innovation Alliance (AALIANCE2)

Date du début: 1 oct. 2011, Date de fin: 31 mai 2014,

Description AALIANCE2 is building further upon the AALIANCE Innovation platform (2008-2010) to:1. Transform the existing AALIANCE Community in a long-term sustainable network:a central 'meeting point' for Ambient Assisted Living (AAL)-related issues and stakeholders in Europea European Technology Platform on integrated solutions for the soci ...
Voir le projet

 10

 TERMINÉ 

Nanoelectronics for Electric Vehicle Intelligent Failsafe Drive Train (MOTORBRAIN)

Date du début: 1 avr. 2011, Date de fin: 1 mars 2014,

The overall objective is to develop sustainable drive train topologies including control concepts for inherently safe electric vehicle power-train. The project focuses on significant steps ahead in terms of: 1. Development of smart electrical power-train concepts comprising high efficiency torque dense motors fully integrated with power converters and storage systems for modularity, compactness re ...
Voir le projet

 30

 TERMINÉ 

Designing Dynamic Distributed Cooperative Human-Machine Systems (D3CoS)

Date du début: 1 mars 2011, Date de fin: 28 févr. 2014,

Transportation based on cars, aircraft and ships is a key factor for modern human societies. Human operators have historically been in charge of the two main facets of transportation: vehicle control and traffic control. Technological innovations have progressively allowed the introduction of advanced automated assistance systems leading to a complex interplay of humans and automation which has be ...
Voir le projet

 24

 TERMINÉ 

Modeling, verification and control of complex systems: From foundations to power network applications (MoVeS)

Date du début: 1 oct. 2010, Date de fin: 30 sept. 2013,

We propose novel methods for modelling, analysis and control of complex, large scale systems. Fundamental research is motivated by applied problems in power networks. We adopt the framework of stochastic hybrid systems (SHS), which allows one to capture the interaction between continuous dynamics, discrete dynamics and probabilistic uncertainty. In the context of power networks, SHS arise naturall ...
Voir le projet

 6

 TERMINÉ 

Exchangeable and Customizable Scanning Probe Tips (NanoBits)

Date du début: 1 sept. 2010, Date de fin: 31 août 2013,

The atomic force microscope (AFM) has become a standard and wide spread instrument for characterizingnanoscale devices and can be found in most of today's research and development areas. The NanoBitsproject provides exchangeable and customizable scanning probe tips that can be attached to standard AFMcantilevers offering an unprecedented freedom in adapting the shape and size of the tips to the su ...
Voir le projet

 6

 TERMINÉ 

CO-design and Power Management in PLatform-based \nDesign Space EXploration (COMPLEX)

Date du début: 1 déc. 2009, Date de fin: 31 mars 2013,

The main objective of the COMPLEX project is to increase the competitiveness of the European semiconductor, system integrator and EDA industry by addressing the problem of platform-based design space exploration under consideration of power and performance constraints early in the design process. High performance usually causes high power consumption. A main challenge in today's embedded system de ...
Voir le projet

 15

 TERMINÉ 

Multi Purpose Mobile Robot for Ambient Assisted Living (Florence)

Date du début: 1 févr. 2010, Date de fin: 31 janv. 2013,

...econd problem addressed by Florence is the acceptance of robots by elderly. For this purpose the project adopts a user-centric approach, by starting with focus-group sessions, having lab-tests in the OFFIS IDEAAL lab, and finally evaluating the services in the Granada AAL living labs. The Florence consortium contains partners from the complete value chain: robot vendors, care providers, and consum ...
Voir le projet

 6

 TERMINÉ 

An Intelligent Platform for Personalized Remote Monitoring of the Cardiac Patients with Electronic Implant Devices (iCARDEA)

Date du début: 1 févr. 2010, Date de fin: 31 janv. 2013,

Over the last decade, there has been an exponential growth in the number of cardiac implantable devices, in their electronic and software complexity widening their function and application. However, due to their limited processing capabilities restricted by their size, CIEDs need to be supported with software running on the data centers. Currently, the data center processing is standalone with the ...
Voir le projet

 8

 TERMINÉ 

Modeling, Control and Management of Thermal Effects in Electronic Circuits of the Future (THERMINATOR)

Date du début: 1 janv. 2010, Date de fin: 31 déc. 2012,

Electronic devices of the latest generations, being those integrated circuits or discrete components, are often required to operate in harsh environmental conditions, where the temperature may reach over hundred degrees centigrade. Obviously, this has negative impact on several parameters of the electronic devices, ranging from slow-down and transient, recoverable errors to permanent failures and ...
Voir le projet

 21

 TERMINÉ 

Haptic, Audio and Visual Interfaces for Maps and Location-Based Services (HaptiMap)

Date du début: 1 sept. 2008, Date de fin: 31 août 2012,

The HAPTIMAP project will deeply embed accessibility into digital mainstream maps and mobile location-based services. Our strategy is twofold: firstly to develop tools that make it easier for developers to add adaptable multimodal components (designed to improve accessibility) to their applications; and secondly, to raise the awareness of these issues via new guidelines and to suggest extensions t ...
Voir le projet

 16

 TERMINÉ 

Cost-Efficient Methods and Processes for Safety Relevant Embedded Systems (CESAR)

Date du début: 1 mars 2009, Date de fin: 30 juin 2012,

"The embedded safety-critical systems design and development industry is facing increasing complexity and variety of systems and devices, coupled with increasing regulatory constraints while costs, performances and time to market are constantly challenged.This has led to a profusion of enablers (new processes, methods and tools), which are neither integrated nor interoperable because they have bee ...
Voir le projet

 54