Plus de 40 projets européens trouvés
Recherche sur 125080 projets européens
TERMINÉ
Scanning probe microscopies for nanoscale fast, tomographic and composition imaging (SPM2.0)
Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,
Advanced Microscopy techniques are widely recognized as one of the pillars onto which the research and manufacture of Nanotechnology based products is sustained. At present, the greatest challenge faced by these techniques is the realization of fast and non-destructive tomographic images with chemical composition sensitivity and with sub-10 nm spatial resolution, in both organic and inorganic mate ...
Voir le projet
10
Participants partenaires
TERMINÉ
Quantum sensors - from the lab to the field (Q-Sense)
Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,
Q-SENSE will promote international and inter-sector collaboration for the advancement of science and the development of innovation in the area of cold atom quantum sensors. In particular it fosters a shared culture of research and innovation that turns the Nobel-prize winning ideas of cold atom research and precision measurement (Nobel prizes 1997 and 2005) into innovative products. In particular, ...
Voir le projet
10
Participants partenaires
TERMINÉ
CLOck NETwork Services: Strategy and innovation for clock services over optical-fibre networks (CLONETS)
Date du début: 1 janv. 2017, Date de fin: 30 juin 2019,
"A scientific and technological paradigm change is taking place, concerning the way that very high performance time and frequency reference signals are distributed, moving from radio signal broadcasting to signal transport over optical fibre networks. The latter technology demonstrates performance improvements by orders of magnitude, over distances up to continental scale. Research infrastructures ...
Voir le projet
16
Participants partenaires
TERMINÉ
Towards Replacement of Critical Catalyst Materials by Improved Nanoparticle Control and Rational Design (CritCat)
Date du début: 1 juin 2016, Date de fin: 31 mai 2019,
The CritCat proposal aims to provide solutions for the substitution of critical metals, especially rare platinum group metals (PGMs), used in heterogeneous and electrochemical catalysis. CritCat will explore the properties of ultra-small transition metal (TM) nanoparticles in order achieve optimal catalytic performance with earth-abundant materials. The emphasis will be on industrially-relevant ch ...
Voir le projet
9
Participants partenaires
TERMINÉ
Piezoelectronic Transduction Memory Device (PETMEM)
Date du début: 1 déc. 2015, Date de fin: 30 nov. 2018,
Computer clock speeds have not increased since 2003, creating a challenge to invent a successor to CMOS technology able to resume performance improvement. The key requirements for a viable alternative are scalability to nanoscale dimensions – following Moore’s Law – and simultaneous reduction of line voltage in order to limit switching power. Achieving these two aims for both transistors and memor ...
Voir le projet
11
Participants partenaires
TERMINÉ
Activating Value Chains for EU leadership in FORMulation Manufacturing 4.0 (AceForm4.0)
Date du début: 1 oct. 2016, Date de fin: 30 sept. 2018,
AceForm4.0 will strengthen European leadership in the development and commercialisation of innovative and sustainable formulated products by i) engaging stakeholders and establishing a strategic common vision, European 2025 roadmap for formulated products and an associated implementation plan; and ii) facilitating knowledge exchange activities aiming at the formation of new collaborative value cha ...
Voir le projet
7
Participants partenaires
TERMINÉ
Graphene-based disruptive technologies (GrapheneCore1)
Date du début: 1 avr. 2016, Date de fin: 31 mars 2018,
This project is the second in the series of EC-financed parts of the Graphene Flagship. The Graphene Flagship is a 10 year research and innovation endeavour with a total project cost of 1,000,000,000 euros, funded jointly by the European Commission and member states and associated countries. The first part of the Flagship was a 30-month Collaborative Project, Coordination and Support Action (CP-CS ...
Voir le projet
158
Participants partenaires
TERMINÉ
Gap Analysis for Integrated Atmospheric ECV CLImate Monitoring (GAIA-CLIM)
Date du début: 1 mars 2015, Date de fin: 28 févr. 2018,
There is a recognised need for establishing sound methods for the characterisation of satellite-based Earth Observation (EO) data by surface-based and sub-orbital measurement platforms - spanning Atmosphere, Ocean and Land observations and the entire radiance spectrum. Robust EO instrument characterisation is about significantly more than simply where and when a given set of EO and ground-based / ...
Voir le projet
18
Participants partenaires
TERMINÉ
Harmonized Evaluation, Certification and Testing of Security Products (HECTOS)
Date du début: 1 sept. 2014, Date de fin: 31 janv. 2018,
Today physical security equipment and systems are very diverse in technology, concept of operations, application areas and performance. Similar security products are difficult to compare in terms of performance, accuracy, usage, trust and validation of functionality. Currently, there are very few certification procedures in Europe mutually recognized by differentMember States. This leads to fragme ...
Voir le projet
8
Participants partenaires
TERMINÉ
Quality Assurance for Essential Climate Variables (QA4ECV)
Date du début: 27 sept. 2013, Date de fin: 1 janv. 2018,
Policy makers are increasingly relying on Earth Observation (EO) data to make decisions on mitigating and adapting to climate change. These decisions need to be 'evidence-based' and this requires complete confidence in EO-derived products. Although EO data is plentiful, it is rare to have reliable, traceable and understandable quality information. The situation is often further confused because va ...
Voir le projet
19
Participants partenaires
TERMINÉ
Resource Efficient Production Route for Rare Earth Magnets (REProMag)
Date du début: 1 janv. 2015, Date de fin: 31 déc. 2017,
The overall objective of the REProMag project is to develop and validate an innovative, resource-efficient manufacturing route (SDS process) for Rare Earth magnets that allows for the economically efficient production of net-shape magnetic parts with complex structures and geometries, while being 100% waste-free along the whole manufacturing chain. The new Shaping, Debinding and Sintering (SDS) pr ...
Voir le projet
15
Participants partenaires
TERMINÉ
Cost-reduction through material optimisation and Higher EnErgy outpuT of solAr pHotovoltaic modules - joining Europe’s Research and Development efforts in support of its PV industry (CHEETAH)
Date du début: 1 janv. 2014, Date de fin: 31 déc. 2017,
Europe has invoked the SET-Plan to design and implement an energy technology policy for Europe to accelerate the development and deployment of cost-effective renewable energy systems, including photovoltaics. With lower cost of solar electricity, PV could significantly contribute to the achievements of the 20-20-20 objectives.The Joint Program on PV of the European Energy Research Alliance (EERA-P ...
Voir le projet
37
Participants partenaires
TERMINÉ
solving CHAllenges in Nuclear DAta (CHANDA)
Date du début: 1 déc. 2013, Date de fin: 30 nov. 2017,
"The CHANDA project main objective is to address the challenges in the field of nuclear data for nuclear applications and its acronym stands for solving CHAllenges in Nuclear DAtaThe project will prepare a proposal for an organization that will coordinate the nuclear data research program, and the infrastructures and capabilities of the EU Member States in a stable structure, well integrated with ...
Voir le projet
35
Participants partenaires
TERMINÉ
QUANTItative scanning probe microscopy techniques for HEAT transfer management in nanomaterials and nanodevices (QUANTIHEAT)
Date du début: 1 déc. 2013, Date de fin: 30 nov. 2017,
The thermal properties of nanostructured materials are of fundamental importance to modern technology, but at present reproducible metrological definitions, tools and methods do not exist. This is because the mechanisms of heat transport at the nanoscale are entirely different to those at the macro scale.The project will place nanothermal metrology on a solid basis by an integrated physics-based e ...
Voir le projet
23
Participants partenaires
TERMINÉ
Dimensional micro and nanometrology using areal topography data produced by 3D surface metrology instruments (METROSURF)
Date du début: 9 févr. 2015, Date de fin: 31 oct. 2017,
The project investigates the development of original methods and algorithms for the dimensional and geometric verification of products and/or surface features defined at micro and nanometric scales. The idea is to overcome the current limitations of SEM imaging (only qualitative information) and micro/nano CMMs (slow, difficult to use) through an unconventional use of measurement data produced by ...
Voir le projet
2
Participants partenaires
TERMINÉ
Nanometrology Standardization Methods for Magnetic Nanoparticles (NANOMAG)
Date du début: 1 nov. 2013, Date de fin: 31 oct. 2017,
The NanoMag project is to improve and redefine existing analyzing methods and in some cases, to develop new analyzing methods for magnetic nanostructures. Using improved manufacturing technologies we will synthesize magnetic nanoparticles with specific properties that will be analyzed with a multitude of characterization techniques (focusing on both structural as well as magnetic properties) and b ...
Voir le projet
18
Participants partenaires
TERMINÉ
International Network for the Training of Early stage Researchers on Advanced Quality control by Computed Tomography (INTERAQCT)
Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,
"The non-destructive quality control of a wide variety of high-added value products, produced by innovative manufacturing techniques, remains a challenge. Examples include additive manufacturing parts, micro parts, and fibre reinforced composite parts. Common to these workpieces is the dependency of their performance on internal and inaccessible elements. Nevertheless, customers in multiple sector ...
Voir le projet
11
Participants partenaires
TERMINÉ
FUTURE ATOMIC CLOCK TECHNOLOGY (FACT)
Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,
During the last decades atomic clocks and frequency standards have become an important resource for advanced economies with impact ranging from satellite navigation (GPS, GLONASS, Galileo) to high speed communication networks, where they ensure synchronisation of data packets at ever higher bit rates. In this field the wake of the new millennium has been marked by the invention of frequency comb t ...
Voir le projet
15
Participants partenaires
TERMINÉ
European Initiative for the standardization and manufacturability of complex micro-fluidic devices (MFMANUFACTURING)
Date du début: 3 mars 2014, Date de fin: 3 mars 2017,
The objective of the MFManufacturing project is to bring the manufacturing of microfluidic devices to the same level of maturity and industrialisation of electronic devices, enabling them to address more widely in the healthcare needs. Electronic devices, which have been on the market for many years, have benefited from the long going standardization of electronic components, and were therefore ea ...
Voir le projet
21
Participants partenaires
TERMINÉ
A common European approach to the regulatory testing of nanomaterials (NANOREG)
Date du début: 1 mars 2013, Date de fin: 28 févr. 2017,
The innovative and economic potential of Manufactured Nano Materials (MNMs) is threatened by a limited understanding of the related EHS issues. While toxicity data is continuously becoming available, the relevance to regulators is often unclear or unproven. The shrinking time to market of new MNM drives the need for urgent action by regulators. NANoREG is the first FP7 project to deliver the answe ...
Voir le projet
73
Participants partenaires
TERMINÉ
Demonstrator of EGNSS Services based on Time Reference Architecture (DEMETRA)
Date du début: 1 janv. 2015, Date de fin: 31 déc. 2016,
DEMETRA aims to demonstrate the feasibility of delivering early EGNSS timing services to end users by utilising an operational demonstrator and conducting tests with pilot applications. Based on the current practice of national metrological laboratories, DEMETRA will define and develop a prototype of a European time disseminator, based on EGNSS., An array of important service features that are nec ...
Voir le projet
14
Participants partenaires
TERMINÉ
Pre-standardisation of incremental FIB micro-milling for intrinsic stress evaluation at the sub-micron scale (ISTRESS)
Date du début: 1 janv. 2014, Date de fin: 31 déc. 2016,
"Intrinsic (or residual) stresses, resulting from manufacturing or processing steps, mostly define the performance and limit the lifetime of nanostructured materials, thin films, coatings and MEMS devices.The established techniques for micron-scale measurement of residual stress still have strong limitations, e.g. in terms of spatial resolution, lack of depth sensing, their applicability on non-cr ...
Voir le projet
16
Participants partenaires
TERMINÉ
Electrical spin manipulation in electroACtive MOLecules (ACMOL)
Date du début: 1 janv. 2014, Date de fin: 31 déc. 2016,
The project "Electrical spin manipulation in electroACtive MOLecules" (ACMOL) has the ambitious goal of fabricating a switchable, room-temperature spin-polarizer employing electro-active and magnetic molecules, which are integrated into graphene-type electrodes modified with ferromagnetic materials. The combination of these molecules with ferromagnetic electrodes is a new route in spintronics. Exp ...
Voir le projet
6
Participants partenaires
TERMINÉ
technology development and fabrication of HIgh TEmperature high frequency CApacitors for power switch integration (HITECA)
Date du début: 1 déc. 2014, Date de fin: 30 nov. 2016,
Automotive, aerospace, and energy production industries can greatly benefit from the development of semiconductor based electronics operating at temperature higher than 150 °C. Wide bandgap semiconductors like SiC and GaN are key enablers as these allow electronics to function at much higher temperatures than silicon. Consequently devices made from these materials can handle more current and thus ...
Voir le projet
3
Participants partenaires
TERMINÉ
Graphene-Based Revolutions in ICT And Beyond (GRAPHENE)
Date du début: 1 oct. 2013, Date de fin: 31 mars 2016,
This Flagship aims to take graphene and related layered materials from a state of raw potential to a point where they can revolutionize multiple industries – from flexible, wearable and transparent electronics, to new energy applications and novel functional composites.Our main scientific and technological objectives in the different tiers of the value chain are to develop material technologies fo ...
Voir le projet
154
Participants partenaires
TERMINÉ
Standardised metrology of Nano-sTrUctuRed CoAtings with Low surface energy (NATURAL)
Date du début: 1 mars 2013, Date de fin: 29 févr. 2016,
There is a growing range of applications that would benefit from the use of nanostructured coatings. The functional performance of a surface is intimately linked with its structure. The ability to characterise nanostructured coatings is therefore an essential part of their future uptake. However, the ability to examine and characterise at the nano-scale is currently limited to sophisticated, time- ...
Voir le projet
11
Participants partenaires
TERMINÉ
Nanoscale Defect Detection, Cleaning and Repair for Large Area Substrates (NANOMEND)
Date du début: 1 janv. 2012, Date de fin: 31 déc. 2015,
NanoMend will pioneer efforts to develop better, more integrated process inspection, cleaning, repair and control systems for nano-scale thin films on large area foils, and will do so in two exemplar vertical supply chains for functionalized polymer-coated paper products and for low cost flexible photovoltaics (PV). The aim is to demonstrate beyond state-of-the-art in-line detection, cleaning an ...
Voir le projet
15
Participants partenaires
TERMINÉ
Transparent Electrodes for Large Area, Large Scale Production of Organic Optoelectronic Devices (TREASORES)
Date du début: 1 nov. 2012, Date de fin: 31 oct. 2015,
Description
TREASORES: producing cheaper large area organic optoelectronic devices using roll-to-roll processes; developing new transparent, conductive, flexible electrodes and better barrier films.TREASORES (Transparent Electrodes for Large Area, Large Scale Production of Organic Optoelectronic Devices) is a project that seeks to develop ...
Voir le projet
16
Participants partenaires
TERMINÉ
Towards Neutral-atom Space Optical Clocks: Development of high-performance transportable and breadboard optical clocks and advanced subsystems (SOC2)
Date du début: 1 mars 2011, Date de fin: 31 oct. 2015,
"A range of new applications will be enabled by ultra-precise optical clocks, some of which by using them in space, near or far distant from Earth. They cover the fields of fundamental physics (tests of General Relativity), time and frequency metrology (comparison of distant terrestrial clocks, operation of a master clock in space), geophysics (mapping of the gravitational potential of the Earth), ...
Voir le projet
17
Participants partenaires
TERMINÉ
Managing Risks of Nanoparticles (MARINA)
Date du début: 1 nov. 2011, Date de fin: 31 oct. 2015,
While there are standard procedures for product life cycle analysis, exposure, hazard, and risk assessment for traditional chemicals, is not yet clear how these procedures need to be modified to address all the novel properties of nanomaterials. There is a need to develop specific reference methods for all the main steps in managing the potential risk of ENM. The aim of MARINA is to develop such ...
Voir le projet
54
Participants partenaires
TERMINÉ
Integrating European Infrastructure to support science and development of Hydrogen- and Fuel Cell Technologies towards European Strategy for Sustainable, Competitive and Secure Energy (H2FC)
Date du début: 1 nov. 2011, Date de fin: 31 oct. 2015,
"The European Strategy Forum on Research Infrastructures (ESFRI) recognizes in its roadmap for Research Infrastructures that ""in the near future, hydrogen, as an energy carrier derived from a number of other fuels, and fuel cells, as energy transformers, are expected to play a major role, for mobile and stationary applications"". With the current fragmentation of the European R&D infrastructures ...
Voir le projet
20
Participants partenaires
TERMINÉ
NANOELECTROMECHANICAL MOTION IN FUNCTIONAL MATERIALS (NANOMOTION)
Date du début: 1 nov. 2011, Date de fin: 31 oct. 2015,
The focus of modern solid-state technology is currently shifting from the single property (electric, magnetic, and elastic) to a coupling of different fields where a coupled materials response can be either used for their characterization or as a basis of novel applications. In the last few years, it became clear that the coupled electromechanical response of the materials (i.e., mechanical deform ...
Voir le projet
8
Participants partenaires
TERMINÉ
Component Performance-driven Solutions for Long-Term Efficiency Increase in Ultra Supercritical Power Plants - MACPLUS (MACPLUS)
Date du début: 1 janv. 2011, Date de fin: 30 juin 2015,
The intelligent and cost effective use of CCS technologies requires new strategies to increase the net efficiency of coal fired power plants. Among them, the most promising are summarised as below:- Increase working steam temperature and pressure in new USC power plants (350-370 bar, 700/720°C minimum), and hence increase the severity of fireside operating conditions,- Promote clean coal technolog ...
Voir le projet
26
Participants partenaires
TERMINÉ
Multi-Gigabit European Research and Education Network and Associated Services (GN3plus)
Date du début: 1 avr. 2013, Date de fin: 30 avr. 2015,
This proposal details activities that will ensure the continued enhancement and ongoing operation of the leading-edge GÉANT network, supporting a range of network and added-value services, targeted at users across the GÉANT service area.In the area of multi-domain network service operation, GN3plus plans to deliver fast, efficient provisioning of advanced services, develop operational support acro ...
Voir le projet
72
Participants partenaires
TERMINÉ
Multiscale Modelling of Hydrogen Embrittlement (MultiHy)
Date du début: 1 mai 2011, Date de fin: 30 avr. 2015,
The proposed project aims to advance the state-of-the-art of numerical modelling of hydrogen embrittlement (HE). The primary focus and novelty of the project is the description of H transport in modern advanced materials with complex microstructures. This goal will be achieved through development of a multiscale modelling framework, which will enable the extraction and propagation of information p ...
Voir le projet
12
Participants partenaires
TERMINÉ
The Piezo institute- European expertise centre for multifunctional and Integrated Piezoelectric Devices (PI)
Date du début: 1 mars 2012, Date de fin: 28 févr. 2015,
"The Piezo institute AISBL (PI) emerged from NoE MIND (Multifinctional & Integrated Piezoelectric Devices). PI is well a functioning non profit organisation with ongoing activities dedicated to support the integration of the fragmented European expertise and deliver innovative educational tools through postgraduate degrees combining materials, technology and device knowledge. It needs, however, t ...
Voir le projet
15
Participants partenaires
TERMINÉ
Volumetric Scanning Microwave Microscopy Analytical and Research Tool for Nanotechnology (V-SMMART NANO)
Date du début: 1 mars 2012, Date de fin: 28 févr. 2015,
This project will produce a new tool, the Volumetric Scanning Microwave Microscope (VSMM), for non-destructive 3D nanoscale structural characterisation. Full development of this new tool will take place ready for commercial exploitation within the project duration. The consortium, comprising three SMEs, a Large Company, an RTD Performer and two Research Institutions, will develop and commercialise ...
Voir le projet
8
Participants partenaires
TERMINÉ
Reduction of microalgae harvesting costs via the development of an ultrasound flow cell to provide pre-concentration (ALGAEMAX)
Date du début: 1 oct. 2012, Date de fin: 31 oct. 2014,
The worldwide production of microalgae is currently around 5,000 tons per year of dry algal biomass, and is used for livestock feed, fish meal, and high value extracts for dietary supplements, functional foods, cosmetics and pharmaceuticals. Microalgae contain around 30% by weight of lipids/oil, and are regarded as a highly promising feedstock for biofuels, primarily biodiesel.Microalgae are comme ...
Voir le projet
8
Participants partenaires
TERMINÉ
Minimizing Defects in Micro-Manufacturing Applications (MIDEMMA)
Date du début: 1 nov. 2011, Date de fin: 31 oct. 2014,
Micro-manufacturing requires 'Zero-Defect' oriented approaches, both in large scale and in short-run production. Current quality control approaches, coming from macro-manufactring, are mainly based on post-process geometric control, which produces a large time lag between the defect generation and its detection, usually leading to large amount of defect parts (large scale) or wasted high value pro ...
Voir le projet
18
Participants partenaires
TERMINÉ
Next Generation Nano-engineered Thermoelectric Converters - from concept to industrial validation (NEXTEC)
Date du début: 1 juin 2011, Date de fin: 31 mai 2014,
Global energy uncertainty and the limited recourses coupled with increased energy needs fuels the search for improving the efficiency of energy conversion technologies. Although the EU policies target increased use of renewable energy to 12% of gross energy production by 2010, this commitment has also highlighted the urgent need for improving the energy utilization of fossil-fuel based power-plant ...
Voir le projet