Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Catalyst Cascade Reactions in ‘One-Flow’ within a Compartmentalized, Green-Solvent ‘Digital Synthesis Machinery’ – End-to-End Green Process Design for Pharmaceuticals (One-Flow)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

"ONE-FLOW translates ‘vertical hierarchy’ of chemical multistep synthesis with its complex machinery into self-organising ‘horizontal hierarchy’ of a compartmentalized flow reactor system – a biomimetic digital flow cascade machinery with just one reactor passage. To keep horizontal hierarchy manageable, orthogonality among the consecutive reactions needs to be increased. The winning point of natu ...
Voir le projet

 8

 TERMINÉ 

GaN densily integrated with Si-CMOS for reliable, cost effective high frequency power delivery systems (GaNonCMOS)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

Power electronics is the key technology to control the flow of electrical energy between source and load for a wide variety of applications from the GWs in energy transmission lines, the MWs in datacenters that power the internet to the mWs in mobile phones. Wide band gap semiconductors such as GaN use their capability to operate at higher voltages, temperatures, and switching frequencies with gr ...
Voir le projet

 11

 TERMINÉ 

Fishfriendly Innovative Technologies for Hydropower (FIThydro)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2020,

FIThydro addresses the decision support in commissioning and operating hydropower plants (HPP) by use of existing and innovative technologies. It concentrates on mitigation measures and strategies to develop cost-efficient environmental solutions and on strategies to avoid individual fish damage and enhancing population developments. Therefore HPPS all over Europe are involved as test sites. The f ...
Voir le projet

 26

 TERMINÉ 

Agri and food waste valorisation co-ops based on flexible multi-feedstocks biorefinery processing technologies for new high added value applications (AgriMax)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,

Approximately one third of all food produced globally is wasted every year throughout the whole value chain-from farmers to consumers. To extract the significant amounts of valuable compounds contained in these wastes, AgriMax will combine affordable and flexible processing technologies (ultrasound assisted and solvent extraction, filtration, thermal and enzymatic treatments) for the valorization ...
Voir le projet

 30

 TERMINÉ 

HOLIstic optimisation of SHIP design and operation for life cycle (HOLISHIP)

Date du début: 1 sept. 2016, Date de fin: 31 août 2020,

Most maritime products are typically associated with large investments and are seldom built in large series. Where other modes of transport benefit from the economy of series production, this is not the case for maritime products which are typically designed to refined customer requirements increasingly determined by the need for high efficiency, flexibility and low environmental impact at a compe ...
Voir le projet

 39

 TERMINÉ 

Cost effective FCL using advanced superconducting tapes for future HVDC grids (FASTGRID)

Date du début: 1 janv. 2017, Date de fin: 30 juin 2020,

Sustainability of energy systems goes through high penetration of renewable energy with huge volumes of electricity to transmit over long distances. The most advanced solution is the HVDC Supergrid. But fault currents remain an issue even if DC circuit breakers have emerged. These are not satisfying, whereas Superconducting Fault Current Limiters (SCFCLs) using REBCO tapes bring an attractive solu ...
Voir le projet

 14

 TERMINÉ 

Innovative Ecological on-site Sanitation System for Water and Resource Savings (INNOQUA)

Date du début: 1 juin 2016, Date de fin: 31 mai 2020,

INNOQUA will accelerate the path to market of a modular set of innovative, patent protected, award winning and scalable fully ecological sanitation solutions that address wide market needs in rural communities, for agricultural industries, for sustainable home-builders or collective housing owners and for developing countries worldwide. The modular system is based on the purification capacity of b ...
Voir le projet

 20

 TERMINÉ 

BRIdges the GAp for Innovations in Disaster resilience (BRIGAID)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2020,

Recent studies from the IPCC indicate that Europe is particularly prone to increased risks of river and coastal floods, droughts resulting in water restrictions and damages from extreme weather such as heat events and wildfires. Evaluations also show a huge potential to reduce these risks with novel adaptation strategies. Researchers, innovators and incubators develop innovative products and servi ...
Voir le projet

 24

 TERMINÉ 

Modified cost effective fibre based structures with improved multi-functionality and performance (MODCOMP)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2020,

Current technological demands are increasingly stretching the properties of advanced materials to expand their applications to more severe or extreme conditions, whilst simultaneously seeking cost-effective production processes and final products. The aim of this project is to demonstrate the influence of different surface enhancing and modification techniques on CF-based materials for high value ...
Voir le projet

 17

 TERMINÉ 

Green Integrated Structural Elements for Retrofitting and New Construction of Buildings (GREEN INSTRUCT)

Date du début: 1 oct. 2016, Date de fin: 31 mars 2020,

The Green INSTRUCT project will develop a prefabricated modular structural building block that is superior to conventional precast reinforced concrete panels by virtue of its reduced weight, improved acoustic and thermal performance and multiple functionalities. The Green INSTRUCT block consists of over 70% of CDW in weight. The Green INSTRUCT project will: (i) achieve sustainability and cost sav ...
Voir le projet

 15

 TERMINÉ 

Analysis System for Gathered Raw Data (ASGARD)

Date du début: 1 sept. 2016, Date de fin: 29 févr. 2020,

ASGARD has a singular goal, contribute to Law Enforcement Agencies Technological Autonomy and effective use of technology. Technologies will be transferred to end users under an open source scheme focusing on Forensics, Intelligence and Foresight (Intelligence led prevention and anticipation). ASGARD will drive progress in the processing of seized data, availability of massive amounts of data and ...
Voir le projet

 34

 TERMINÉ 

Demonstration of soft stimulation treatments of geothermal reservoirs (DESTRESS)

Date du début: 1 mars 2016, Date de fin: 29 févr. 2020,

DESTRESS is aimed at creating EGS (Enhanced geothermal systems) reservoirs with sufficient permeability, fracture orientation and spacing for economic use of underground heat. The concepts are based on experience in previous projects, on scientific progress and developments in other fields, mainly the oil & gas sector. Recently developed stimulation methods will be adapted to geothermal needs, app ...
Voir le projet

 16

 TERMINÉ 

Accelerating HIV Cure in Europe (EU4HIVCURE)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2020,

...elerate the State of the Art in HIV CURE research in Europe, our EU4HIVCURE consortium brings together an intersectoral and interdisciplinary collaboration between 3 Universities, 3 Hospitals, 1 International Research Organisation from 4 European countries and 1 University from Canada. Our aim is to dissect the intricate mechanisms controlling HIV-1 latency and identify new druggable targets to de ...
Voir le projet

 6

 TERMINÉ 

European Gram Negative Antibacterial Engine (ENABLE)

Date du début: 1 févr. 2014, Date de fin: 31 janv. 2020,

The intensive use and misuse of antibiotics has resulted in some level of antibiotic resistance in essentially all human bacterial pathogens. There is a growing concern that the loss of therapeutic options will present us with a post-antibiotic era where present and future medical advances are negated. Resistant bacteria dramatically reduce the possibilities of treating infections effectively, a ...
Voir le projet

 42

 TERMINÉ 

Novel Processes and Equipment in Composite Repair Technology (NEWCORT)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

NEWCORT will develop and validate novel processes and equipment for the repair of composite airframes. Three key stages in the bonded composite repair procedure were identified, namely material removal & surface preparation, heating for polymerization of patch and positive pressure application for improved compaction of patch layers. In all three stages novel processes will be developed, either th ...
Voir le projet

 5

 TERMINÉ 

Safe long term operation of light water reactors based on improved understanding of radiation effects in nuclear structural materials (SOTERIA)

Date du début: 1 sept. 2015, Date de fin: 31 août 2019,

The overall aim of the SOTERIA project is to improve the understanding of the ageing phenomena occurring in reactor pressure vessel (RPV) steels and in the internal steels (internals) in order to provide crucial information to regulators and operators to ensure safe long-term operation (LTO) of existing European nuclear power plants (NPPs). SOTERIA has set up a collaborative research consortium wh ...
Voir le projet

 25

 TERMINÉ 

Ship Lifecycle Software Solutions (SHIPLYS)

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

SHIPLYS has been specified as necessary by our architect, shipbuilder and shipowner members, who, in order to survive in the world market, need to improve their capability to reduce the cycle time and costs of design and production, to be able to reliably produce better ship concepts through virtual prototyping and to meet the increasing requirements for LCCA (Life Cycle Cost Analysis), environmen ...
Voir le projet

 12

 TERMINÉ 

HYDRALAB+ Adapting to climate change (HYDRALAB-PLUS)

Date du début: 1 sept. 2015, Date de fin: 31 août 2019,

HYDRALAB is an advanced network of environmental hydraulic institutes in Europe, which has been effective in providing access to a suite of major and unique environmental hydraulic facilities from across the whole European scientific community.A continuation project will prepare environmental hydraulic modelling for the upcoming urgent technical challenges associated with adaptations for climate c ...
Voir le projet

 24

 TERMINÉ 

INTEGRATED AND ADAPTIVE RESPONSES TO TOXIC EMERGENCIES FOR RAPID TRIAGE: ENGINEERING THE ROADMAP FROM CASUALTY TO PATIENT TO SURVIVOR. (TOXI-triage)

Date du début: 1 sept. 2015, Date de fin: 31 août 2019,

The seven specific objectives of TOXI-triage address the operational; technological; ethical and societal dimensions of CBRN response and recovery, and importantly the economic base from which sustainable CBRN and multi-use systems are derived.19 partners in 4 Task forces will deliver 9 Work Packages (WPs) that address: end user specifications; Design and delivery; Test and Validation; and, Impact ...
Voir le projet

 19

 TERMINÉ 

Ecosystem for Collaborative Manufacturing Processes – Intra- and Interfactory Integration and Automation (COMPOSITION)

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

Data and services have become the key factor in manufacturing processes. The need to react on dynamically changing market demands is dramatically rising. One of the most imperative problems so far is to connect supply chain data and services between enterprises and to connect value chain data within a factory, so that it can meaningfully support decision-making. COMPOSITION will create a digital a ...
Voir le projet

 12

 TERMINÉ 

Open Sea Operating Experience to Reduce Wave Energy Cost (OPERA)

Date du début: 1 févr. 2016, Date de fin: 31 juil. 2019,

...gs together world leaders in wave energy research from four European countries and the IPR owner and most advanced teams to exploit each of these innovations. Last but not least, the project brings national in-cash co-financing of over €2 million to directly fund the open-sea testing.
Voir le projet

 12

 TERMINÉ 

PHotonics enhanced fAB LABS supporting the next revolution in digitalization (PHABLABS 4.0)

Date du début: 1 déc. 2016, Date de fin: 31 mai 2019,

PHABLABS 4.0 aims to integrate photonics in a durable way into the rapidly expanding ecosystem of European Fab Labs and Makerslabs, resulting in a larger and better skilled photonics workforce with superior innovation capacity to achieve a lasting, positive impact on the next revolution in digitization. Combining the forces of top experts from 13 European photonics institutes and STEM-oriented org ...
Voir le projet

 13

 TERMINÉ 

Quintuple Helix Approach to Targeted Open Innovation in Energy, Water, Agriculture in the South Mediterranean Neighborhood (5TOI_4EWAS)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2019,

...bility of young innovators/researchers and shared knowledge to improve their participation in the EU research area. It will contribute to the establishment of favorable and stable conditions for international cooperation and the set-up of a Common Knowledge and Innovation Space of specialization in the SMN for a real socio-economic impact, based on co-ownership and mutual benefits.Our partnership ...
Voir le projet

 25

 TERMINÉ 

European Initiative to Enable Validation for Highly Automated Safe and Secure Systems (ENABLE-S3)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2019,

ENABLE-S3 will pave the way for accelerated application of highly automated and autonomous systems in the mobility domains automotive, aerospace, rail and maritime as well as in the health care domain. Virtual testing, verification and coverage-oriented test selection methods will enable validation with reasonable efforts. The resulting validation framework will ensure Europeans Industry competiti ...
Voir le projet

 76

 TERMINÉ 

Sustainable oceans : our collective responsibility, our common interest. Building on real-life knowledge knowledge systems for developing interactive and mutual learning media (Respon-SEA-ble)

Date du début: 1 avr. 2015, Date de fin: 31 mars 2019,

The project will develop well-targeted and sound communication material that raises awareness on our (individual and collective) responsibility and interest in ensuring the sustainability of the ocean and of its ecosystems. The project builds on critical assessments of: (1) existing communication strategies, material and governance that focuses on the ocean; (2) the values, perceptions and underst ...
Voir le projet

 15

 TERMINÉ 

A novel process for manufacturing complex shaped Fe-Al intermetallic parts resistant to extreme environments (EQUINOX)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2019,

There is a need to find solutions to replace Critical Raw Materials (CRMs) such as Chromium, Nickel, Molybdenium and Vanadium in high volume end consumer products. Steels and superalloys with considerable amounts of these CRMs are widely used in many industrial applications, particularly under extreme conditions where corrosion and wear resistance are needed. It is generally accepted, that interme ...
Voir le projet

 11

 TERMINÉ 

Training in Reducing Uncertainty in Structural Safety (TRUSS)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2018,

The growth of cities, impacts of climate change and the massive cost of providing new infrastructure provide the impetus for this proposal – entitled Training in Reducing Uncertainty in Structural Safety (TRUSS) – which will maximize the potential of infrastructure that already exists. If flaws in a structure can be identified early, the cost of repair will be vastly reduced, and here an effective ...
Voir le projet

 9

 TERMINÉ 

Transnational Holistic Ecosystem 4 Better Energy Efficiency through Social innovation (THE4BEES)

Date du début: 16 déc. 2015, Date de fin: 15 déc. 2018,

...n the behavioural changes of users in public buildings needed to achieve reduction of energy consumption. Such changes will be originated by the use of innovative ICT applications developed by a transnational ecosystem.The Project will set-up transnational Labs involving academia, decision makers and key administrations, entrepreneurship and citizens. Awareness raising and capacity building action ...
Voir le projet

 13

 TERMINÉ 

Master Degree in Innovative Technologies in Energy Efficient Buildings for Russian & Armenian Universities and Stakeholders

Date du début: 15 oct. 2015, Date de fin: 14 oct. 2018,

Establishment and development of a new Master on “ENVIRONMENTAL PROTECTION AND ENERGY EFFICIENT BUILDINGS” in 3 RU and 2 AM Universities with affiliation of other 2 RU Universities, according to features and learning outcomes delivering graduates environmental and “green buildings” technological issues’ skills. 1. Curricular reform: to implement an effective curricular development oriented towards ...
Voir le projet

 20

 TERMINÉ 

Flight safety and airworthiness - a masters programme

Date du début: 15 oct. 2015, Date de fin: 14 oct. 2018,

The international aviation industry understandably devotes much attention to the question of Flight safety and airworthiness, stressing the need for a holistic understanding between the machines, people who use them and the environment in which they operate throughout the aircraft’s life cycle. This project addresses the issue by developing an educational programme that assists in bringing the ap ...
Voir le projet

 9

 TERMINÉ 

Toward an Open Resources Upon Services : Cloud Computing of Environmental Data

Date du début: 15 oct. 2015, Date de fin: 14 oct. 2018,

The TORUS project (Toward an Open Resources Upon Services: Cloud of environmental data) aims to make operational techniques of cloud computing (CC) in the disciplinary field of environmental science and massive databases (Big Data) for future training and projects in partner countries. Schematically, the CC is the mutualisation of hardware and software resources via the Internet. It reduces the co ...
Voir le projet

 8

 TERMINÉ 

Licence professionnelle en formation ouverte et à distance pour la performance énergétique et environnementale des bâtiments en Fédération de Russie, en Chine et en Azerbaïdjan

Date du début: 15 oct. 2015, Date de fin: 14 oct. 2018,

Joint project for the modernization of educational programs in climate engineering, regional priority for Russia and China, national priority for Azerbaijan.3 AIMS IN EACH COUNTRY:Reduce skills gaps on intermediate levels (construction site coordinator, design technician) by improving the employability of students and by perfecting corporate executives.Professionalize teaching programs in line wit ...
Voir le projet

 25

 TERMINÉ 

Development of two cycle innovative curricula in microelectronic engineering

Date du début: 15 oct. 2015, Date de fin: 14 oct. 2018,

... / curricula in microelectronics inclusive ECTS; to develop a set of 11 new core curricula and 5 transferable modules in micro-, nano-electronics incl. soft skills/adopt on institutional/ accredit on national level ; to develop, publish, purchase the new tutorials, handbooks, syllabi; to develop WEB based platform; to prepare a set of documentation for MicLabs, purchase/install the equipment; to r ...
Voir le projet

 17

 TERMINÉ 

Intercultural Europe: Urban Planning Based on the Principles of Social Integration

Date du début: 1 sept. 2015, Date de fin: 31 août 2018,

Social integration of ethnic groups and their mutual tolerance are the matters of great concern among the political quarters of Europe. Migrants tend to concentrate in the cities; urban planning and management must take account of the needs and concerns of the ethnic groups. Urban authorities must make urban planning decisions with account for the concerns of ethnic groups and prevent ghettoizatio ...
Voir le projet

 1

 TERMINÉ 

Enhancement of training capabilities in VVER technology through establishment of VVER training academy (CORONA II) (CORONA II)

Date du début: 1 sept. 2015, Date de fin: 31 août 2018,

...-art regional training center for VVER competence (which will be called CORONA Academy), whose pilot implementation through CORONA project (2011-2014) proved to be viable solution for supporting transnational mobility and lifelong learning amongst VVER operating countries. The project aims at continuation of the European cooperation and support in the area for preservation and further development ...
Voir le projet

 9

 TERMINÉ 

"""2nd Generation Active Wing“ – Active Flow- Loads & Noise control on next generation wing" (AFLONEXT)

Date du début: 1 juin 2013, Date de fin: 31 mai 2018,

AFLoNext is a four year EC L2 project with the objective of proving and maturing highly promising flow control technologies for novel aircraft configurations to achieve a quantum leap in improving aircraft’s performance and thus reducing the environmental footprint. The project consortium is composed by forty European partners from fifteen countries. The work has been broken down into seven work p ...
Voir le projet

 41

 TERMINÉ 

Aeroelastic Gust Modelling (AEROGUST)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2018,

Encounters with atmospheric turbulence are a vitally important in the design and certification of many manmade structures such as aircraft and wind turbines. Gusts cause rapid changes in the flow about the structures which leads to rigid and flexible unsteady responses. Knowledge of aircraft/gust interactions is therefore vital for loads estimation during aircraft design as it impacts on control s ...
Voir le projet

 13

 TERMINÉ 

Scientific and Technological Alliance for Guaranteeing the European Excellence in Concentrating Solar Thermal Energy (STAGE-STE)

Date du début: 1 févr. 2014, Date de fin: 31 janv. 2018,

... creating a new entity with effective governance structure; b) Enhance the cooperation between EU research institutions participating in the IRP to create EU added value; c) Synchronize the different national research programs to avoid duplication and to achieve better and faster results; d) Accelerate the transfer of knowledge to industry in order to maintain and strengthen the existing European ...
Voir le projet

 42

 TERMINÉ 

Product-Service sYMBIOtic SYStems (PSYMBIOSYS)

Date du début: 1 févr. 2015, Date de fin: 31 janv. 2018,

Product-service solutions are not a novelty for manufacturing domain, in particular for Europe. Services are becoming more and more not just an optional adjunct to products, but they are integral part of manufacturing industries’ offer, able to differentiate the product value proposition, to take a significant part of the revenue stream and even to substitute the traditional selling of products wi ...
Voir le projet

 13

 TERMINÉ 

Ecosystem infrastructure for smart and personalised inclusion and PROSPERITY for ALL stakeholders (Prosperity4All)

Date du début: 1 févr. 2014, Date de fin: 31 janv. 2018,

... the infrastructure to allow a new ecosystem to grow; one that is based on self-rewarding collaboration, that can reduce redundant development, lower costs, increase market reach and penetration internationally, and create the robust cross-platform spectrum of mainstream and assistive technology based access solutions required. This will be done through a process based on true value propositions f ...
Voir le projet

 25