Rechercher des projets européens

26 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Pre-commercial lines for production of surface nanostructured antimicrobial and anti-biofilm textiles, medical devices and water treatment membranes (PROTECT)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

PROTECT aims to introduce to the market One step antimicrobial finish processes for polymeric materials used in i) specialty textiles for public areas and hospitals, ii) water treatment membranes, and iii) implantable medical devices. Compared to main existing manufacturing routes, the proposed one-step coating technologies are simple, fast, and reproducible. For this, PROTECT uses as a starting p ...
Voir le projet

 23

 TERMINÉ 

Scanning probe microscopies for nanoscale fast, tomographic and composition imaging (SPM2.0)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

Advanced Microscopy techniques are widely recognized as one of the pillars onto which the research and manufacture of Nanotechnology based products is sustained. At present, the greatest challenge faced by these techniques is the realization of fast and non-destructive tomographic images with chemical composition sensitivity and with sub-10 nm spatial resolution, in both organic and inorganic mate ...
Voir le projet

 10

 TERMINÉ 

Green Integrated Structural Elements for Retrofitting and New Construction of Buildings (GREEN INSTRUCT)

Date du début: 1 oct. 2016, Date de fin: 31 mars 2020,

The Green INSTRUCT project will develop a prefabricated modular structural building block that is superior to conventional precast reinforced concrete panels by virtue of its reduced weight, improved acoustic and thermal performance and multiple functionalities. The Green INSTRUCT block consists of over 70% of CDW in weight. The Green INSTRUCT project will: (i) achieve sustainability and cost sav ...
Voir le projet

 15

 TERMINÉ 

Piezoelectronic Transduction Memory Device (PETMEM)

Date du début: 1 déc. 2015, Date de fin: 30 nov. 2018,

Computer clock speeds have not increased since 2003, creating a challenge to invent a successor to CMOS technology able to resume performance improvement. The key requirements for a viable alternative are scalability to nanoscale dimensions – following Moore’s Law – and simultaneous reduction of line voltage in order to limit switching power. Achieving these two aims for both transistors and memor ...
Voir le projet

 11

 TERMINÉ 

Novel nanoparticle enhanced Digital Materials for 3D Printing and their application shown for the robotic and electronic industry (DIMAP)

Date du début: 1 oct. 2015, Date de fin: 30 sept. 2018,

The here proposed DIMAP project focuses on the development of novel ink materials for 3D multi-material printing by PolyJet technology. We will advance the state-of-the art of AM through modifications of their fundamental material properties by mainly using nanoscale material enhanced inks. This widens the range of current available AM materials and implements functionalities in final objects. The ...
Voir le projet

 13

 TERMINÉ 

Development and implementation of Grouping and Safe-by-Design approaches within regulatory frameworks (NanoREG II)

Date du début: 1 sept. 2015, Date de fin: 31 août 2018,

One of the greatest challenges facing regulators in the ever changing landscape of novel nano-materials is how to design and implement a regulatory process which is robust enough to deal with a rapidly diversifying system of manufactured nanomaterials (MNM) over time. Not only does the complexity of the MNM present a problem for regulators, the validity of data decreases with time, so that the wel ...
Voir le projet

 46

 TERMINÉ 

Enhanced substrates and GaN pilot lines enabling compact power applications (PowerBase)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2018,

The key objective of PowerBase “Enhanced substrates and GaN pilot lines enabling compact power applications” is to ensure the availability of Electronic Components and Systems (ECS) for key markets and for addressing societal challenges, aiming at keeping Europe at the forefront of the technology development, bridging the gap between research and exploitation, creating economic and employment grow ...
Voir le projet

 40

 TERMINÉ 

Graphene-based disruptive technologies (GrapheneCore1)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2018,

This project is the second in the series of EC-financed parts of the Graphene Flagship. The Graphene Flagship is a 10 year research and innovation endeavour with a total project cost of 1,000,000,000 euros, funded jointly by the European Commission and member states and associated countries. The first part of the Flagship was a 30-month Collaborative Project, Coordination and Support Action (CP-CS ...
Voir le projet

 158

 TERMINÉ 

Actuation and characterisation at the single bond limit (ACRITAS)

Date du début: 1 oct. 2012, Date de fin: 31 mars 2017,

"Scanning probe microscopy(SPM) has now evolved to the point where not only is imaging and manipulation with single atom resolution achievable but the state of the art in the field involves sub-molecular and sub-atomic resolution: individual chemical bonds can be resolved, their properties measured, and their spatial symmetry exploited.SPM is, however, increasingly a victim of its own success. The ...
Voir le projet

 12

 TERMINÉ 

Taking Nanotechnological Remediation Processes from Lab Scale to End User Applications for the Restoration of a Clean Environment (NANOREM)

Date du début: 1 févr. 2013, Date de fin: 31 janv. 2017,

NANOREM is designed to unlock the potential of nanoremediation and so support both the appropriate use of nanotechnology in restoring land and aquifer resources and the development of the knowledge-based economy at a world leading level for the benefit of a wide range of users in the EU environmental sector.NANOREM uniquely takes a holistic approach to examining how the potential for nanoremediati ...
Voir le projet

 30

 TERMINÉ 

Process Line Implementation for Applied Surface Nanotechnologies (PLIANT)

Date du début: 1 févr. 2013, Date de fin: 31 janv. 2017,

In this proposed integrating project we will develop innovative in-line high throughput manufacturing technologies which are all based on atmospheric pressure (AP) vapour phase surface and on AP plasma processing technologies. Both approaches have significant potential for the precise synthesis of nano-structures with tailored properties, but their effective simultaneous combination is particularl ...
Voir le projet

 24

 TERMINÉ 

Microwave Nanotechnology for Semiconductor and Life Sciences (NANOMICROWAVE)

Date du début: 1 janv. 2013, Date de fin: 31 déc. 2016,

Current applications of microwave technologies in communications, remote sensing and in industry are based on the properties of the interaction of microwaves with matter at supra-wave length scales (above centimetres). The developments performed in Nanotechnology in recent years makes now conceivable to explore the interaction of microwaves with matter at much smaller scales, from micrometres to n ...
Voir le projet

 10

 TERMINÉ 

Development of a cost-efficient, precise and miniaturized sensor system for quality and performance control in baking processes (BREAD-GUARD)

Date du début: 1 déc. 2013, Date de fin: 30 nov. 2016,

Quality assurance plays a key role in the food industry. Current control of safety and quality characteristics in the bakery industry is carried out mainly by random sampling of the initial, intermediate and/or final products. However, this methodology does not allow immediate adjustments to the production process in case any negative quality features are detected and consequently large batches of ...
Voir le projet

 12

 TERMINÉ 

Nanotechnology based gas multispectral sensing system for environmental control and protection (IAQSense)

Date du début: 1 sept. 2013, Date de fin: 31 août 2016,

IAQ is a crucial factor for human’s apperception. It is proven that air quality affects the health and the well-being of people. IAQSense focuses on R&D to develop a new nanotechnology based on innovative sensor system, miniaturized, low cost for mass produced sensors.The main technology innovation is based on surface ion mobility dynamics, it separates each gas component and its concentration lik ...
Voir le projet

 10

 TERMINÉ 

Development of a cost-efficient, precise and miniaturized sensor system (Nano-Spectrometer) for quality and process control in the food industry (FOOD-WATCH)

Date du début: 1 août 2014, Date de fin: 31 juil. 2016,

Quality assurance plays a key role in the food industry. Current control of safety and quality characteristics of the various products is carried out mainly by random sampling of the initial, intermediate and/or final products. However, this methodology does not allow immediate adjustments to the production process in case any negative quality features are detected and consequently large batches o ...
Voir le projet

 8

 TERMINÉ 

Sensitive MeAsuRemenT, detection, and identification of engineered NANOparticles in complex matrices (SMART-NANO)

Date du début: 1 juin 2012, Date de fin: 31 mai 2016,

SMART-NANO will develop an innovative, cost-effective technology platform that provides a total solution “from sample-to-result” for the detection, identification, and measurement of nanoparticles in complex matrices in Consumer Products, in Food, in the Environment and in situ in Biota. A key innovation is the miniaturized, application-specific, cartridge-based system integrating separation, dete ...
Voir le projet

 8

 TERMINÉ 

Graphene-Based Revolutions in ICT And Beyond (GRAPHENE)

Date du début: 1 oct. 2013, Date de fin: 31 mars 2016,

This Flagship aims to take graphene and related layered materials from a state of raw potential to a point where they can revolutionize multiple industries – from flexible, wearable and transparent electronics, to new energy applications and novel functional composites.Our main scientific and technological objectives in the different tiers of the value chain are to develop material technologies fo ...
Voir le projet

 154

 TERMINÉ 

Energy Efficient Converters using GaN Power Devices (E2COGAN)

Date du début: 1 avr. 2013, Date de fin: 31 mars 2016,

The E2COGaN project will target the demonstration of GaN-on-Si as a disruptive power device technology platform through the whole value chain up to demonstrators with high industrial, societal and environmental relevance. Its innovative character will be proven through a well-balanced and application specific trade-off between the “corner” benefits given by higher efficiency, higher switching freq ...
Voir le projet

 25

 TERMINÉ 

Neuronal NanoCarbon Interfacing Structures (NeuroCare)

Date du début: 1 mars 2012, Date de fin: 28 févr. 2015,

NeuroCare aims to create better retinal, cortical and cochlear implantable devices through the use of improved interfacing between the electronic implants and living cells. The NeuroCare concept involves low-cost, carbon-based materials, well-adapted for medical implants, because they (i) offer wide range of electronic properties (metal, semiconductor and insulator), (ii) are bio-inert and (iii) a ...
Voir le projet

 14

 TERMINÉ 

Volumetric Scanning Microwave Microscopy Analytical and Research Tool for Nanotechnology (V-SMMART NANO)

Date du début: 1 mars 2012, Date de fin: 28 févr. 2015,

This project will produce a new tool, the Volumetric Scanning Microwave Microscope (VSMM), for non-destructive 3D nanoscale structural characterisation. Full development of this new tool will take place ready for commercial exploitation within the project duration. The consortium, comprising three SMEs, a Large Company, an RTD Performer and two Research Institutions, will develop and commercialise ...
Voir le projet

 8

 TERMINÉ 

Nano-systems for the conservation of immoveable and moveable polymaterial Cultural Heritage in a changing environment (NANOMATCH)

Date du début: 1 nov. 2011, Date de fin: 31 oct. 2014,

Government authorities, restoration architects and conservation scientists have always had to face the problem of deterioration of historic building materials, in particular stone, wood and glass; an issue that has become more and more urgent since climate change has worsened natural decay and the impact of atmospheric pollution. In addition in recent years socio-economic requirements have claimed ...
Voir le projet

 14

 TERMINÉ 

Microstructure secured and self-verifying medicines (SAVEmed)

Date du début: 1 avr. 2011, Date de fin: 31 mars 2014,

Counterfeit medicines are a serious and fast expanding threat for the customer’s health and the pharmaceutical manufacturers business. The aim of this research collaboration is to add anti-counterfeiting and track & trace technology to the product level that goes beyond the state-of-the-art security approach on the packaging level. The project SAVEmed will bring a solution for the counterfeit and ...
Voir le projet

 7

 TERMINÉ 

Integrated and functional Lab-on-Chip (InFuLOC)

Date du début: 1 mars 2009, Date de fin: 28 févr. 2013,

The objective of this project is to create Lab-on-chip devices that allow sensitive analyte detection as well being highly integrated and have high functionality. The project will develop lab-on-chip platform technologies for fluidic manipulations and analyte detection and develop specific Lab-on-Chip (LOC) applications. Integrated and easy to use fluidic manipulations within LOC devices will be a ...
Voir le projet

 6

 TERMINÉ 

Biomineralization: Understanding of basic mechanisms for the design of novel strategies in nanobiotechnology (BIOMINTEC)

Date du début: 1 sept. 2008, Date de fin: 31 août 2012,

"Biomineralization is the formation of minerals by living cells and organisms. To understand the processes involved in biomineralization, at the cutting edge between inorganic and organic world, the cooperation between molecular and cell biologists, inorganic chemists, and physical chemists, but also computational scientists is required. The products formed by biomineralization are often composite ...
Voir le projet

 10

 TERMINÉ 

European observatory for science-based and economic expert analysis of nanotechnologies, cognisant of barriers and risks, to engage with relevant stakeholders regarding benefits and opportunities (observatoryNANO)

Date du début: 1 avr. 2008, Date de fin: 31 mars 2012,

observatoryNANO brings together leading EU organizations who collectively have expertise in the technological; economic; societal/ethical; health, safety, and environmental analysis of nanotechnologies. Its primary aim is to develop appropriate methodologies to link scientific and technological development of nanotechnologies with socio-economic impacts. Both of these aspects will be enhanced by e ...
Voir le projet

 16

 TERMINÉ 

Creating and disseminating novel nanomechanical characterisation techniques and standards (NANOINDENT)

Date du début: 1 sept. 2008, Date de fin: 31 août 2011,

"Our project aims to gather, improve, catalogue and present characterisation techniques, methods and equipment for nanomechanical testing. European-wide activities coordinated by a new virtual centre will improve existing nanoindentation metrology to reveal structure-properties relationship at the nano-scale. These methods are the only tools to characterise nanocomposite, nanolayer and interface m ...
Voir le projet

 17