16 projets européens trouvés
Recherche sur 125080 projets européens
TERMINÉ
Systems Biology to Identify Molecular Targets for Vascular Disease Treatment (SYSVASC)
Date du début: 1 févr. 2014, Date de fin: 31 janv. 2018,
Asymptomatic vascular damage accumulates for years before patients are identified and subjected to therapeutic measures. The limited knowledge on early vascular disease pathophysiology is reflected in the lack of therapeutic options. SysVasc aims to overcome this limitation by mounting a comprehensive systems medicine approach to elucidate pathological mechanisms, which will yield molecular target ...
Voir le projet
19
Participants partenaires
TERMINÉ
High Altitude Ice Crystals (HAIC)
Date du début: 1 août 2012, Date de fin: 31 janv. 2017,
Commercial aircraft have been experiencing in-service events while flying in the vicinity of deep convective clouds since at least the early 1990s. Heated probes and engines are the areas of air-craft most prone to mixed phase and glaciated icing threat. In anticipation of regulation changes regarding mixed phase and glaciated icing conditions, the HAIC project will provide the necessary Acceptabl ...
Voir le projet
40
Participants partenaires
TERMINÉ
Cold Spray Radical Solutions for Aeronautic Improved Repairs (CORSAIR) (CORSAIR)
Date du début: 1 juin 2013, Date de fin: 30 nov. 2016,
CORSAIR project is a wide investigation concerning the capabilities of Cold Spray Technology for maintenance and repair of aeronautic frames and components. Today, deep and systematic investigation in Cold Spray is required to better understand the capabilities and fully validate the technology in aeronautics. In this scenario, the activities planned in CORSAIR project are (1) Explore the real cap ...
Voir le projet
13
Participants partenaires
TERMINÉ
Semiconductor Equipment Assessment for Key Enabling Technologies (SEA4KET)
Date du début: 1 nov. 2013, Date de fin: 31 oct. 2016,
SEA4KET (Semiconductor Equipment Assessment for Key Enabling Technologies) is an IP proposal taking the consequent step from equipment R&D to equipment assessment experiments. The strategic objective is to effectively combine resources and expertise in a joint assessment of novel equipment for key enabling technologies to foster and accelerate the successful transfer of novel European equipment in ...
Voir le projet
26
Participants partenaires
TERMINÉ
EU taxation and third countries (EUTC)
Date du début: 1 août 2012, Date de fin: 31 juil. 2016,
The increasing interdependence of national economies and the globalization lead to new possibilities and risks related to cross-border taxation for investors and governments. To minimize the risks and to support the possibilities for European and third countries, alternatives to national fiscal sovereignty, i.e. various forms of treaties on a bilateral or supra-national level, may be required. Wit ...
Voir le projet
2
Participants partenaires
TERMINÉ
Accelerated Metallurgy - the accelerated discovery of alloy formulations using combinatorial principles (AccMet)
Date du début: 15 juin 2011, Date de fin: 14 juin 2016,
"The core concept of Accelerated Metallurgy is to deliver an integrated pilot-scale facility for the combinatorial synthesis and testing of many thousands of unexplored alloy formulations. This facility would be the first of its kind in the world and would represent a significant advance for metallurgy. The novel technology that enables this HTT facility is based on automated, direct laser deposit ...
Voir le projet
34
Participants partenaires
TERMINÉ
High-frequency ELectro-Magnetic technologies for advanced processing of ceramic matrix composites and graphite expansion (HELM)
Date du début: 1 juin 2012, Date de fin: 31 mai 2016,
"Lightweight ceramics and fibre reinforced ceramic composites, such as non-oxide Ceramic Matrix Composites (CMCs) and Expanded Graphite (EG), represent very promising solutions for high temperature applications in strategic industrial sectors, such as transport and energy. In fact, these materials are one of topical priorities of the European Technology Platform EuMAT and a strategic issue of the ...
Voir le projet
21
Participants partenaires
TERMINÉ
ACTUATION 2015: Modular Electro Mechanical Actuators for ACARE 2020 Aircraft and Helicopters (ACTUATION2015)
Date du début: 1 nov. 2011, Date de fin: 30 avr. 2016,
The All-Electric Aircraft is a major target for the next generation of aircraft to lower consumption of non-propulsive power and thus fuel burn. To eliminate hydraulic circuits, pumps and reservoirs, Electro Mechanical Actuators (EMA) are mandatory but now need to meet cost, reliability and weight requirements from the airframers.ACTUATION2015 aims to develop and validate a common set of standard ...
Voir le projet
56
Participants partenaires
TERMINÉ
Smart Intelligent Aircraft Structures (SARISTU)
Date du début: 1 sept. 2011, Date de fin: 31 août 2015,
The project proposal concerns the challenges posed by the physical integration of smart intelligentstructural concepts. It addresses aircraft weight and operational cost reductions as well as animprovement in the flight profile specific aerodynamic performance.This concerns material concepts enabling a conformal, controlled distortion of aerodynamicallyimportant surfaces, material concepts enablin ...
Voir le projet
68
Participants partenaires
TERMINÉ
International Tax Coordination (ITC)
Date du début: 1 avr. 2011, Date de fin: 31 mars 2015,
As a result of globalization and the increasing interdependence of national economies, new possibilities and risks related to cross-border taxation arise for investors and governments. To minimize the risks and to support the possibilities, alternatives to national fiscal sovereignty, i.e. various forms of tax coordination on a bilateral or supra-national level, may be required. Within the joint e ...
Voir le projet
2
Participants partenaires
TERMINÉ
Cost Effective Reinforcement of Fastener Areas in Composites (CERFAC)
Date du début: 1 oct. 2010, Date de fin: 31 déc. 2014,
"CERFAC’s major challenge is the design and manufacturing of strong and cost-efficient joints for high performance CFRP aero-structures.In particular, transfer of distributed loading along rivets lines in the assembly of flat or curved thin-walled stiffened panels, and introduction of concentrated loads for connecting lugs with thicker laminates are special & frequent problems. Hence, CERFAC focus ...
Voir le projet
15
Participants partenaires
TERMINÉ
Innovative Manufacturing of complex Ti sheet components (INMA)
Date du début: 1 sept. 2010, Date de fin: 30 juin 2014,
"The INMA project aims at developing an intelligent knowledge-based (KB) flexible manufacturing technology for titanium shaping that will lead to drastically reduce current aircraft development costs incurred by the fabrication of complex titanium sheet components with a minimal environmental impact. In particular, this project aims at strengthening European aircraft industry competitiveness, by t ...
Voir le projet
11
Participants partenaires
TERMINÉ
Forest biorefineries: Added-value from chemicals and polymers by new integrated separation, fractionation and upgrading technologies (AFORE)
Date du début: 1 sept. 2009, Date de fin: 31 août 2013,
The approach of AFORE project is to develop novel, industrially adaptable and techno-economically viable bio-based solutions for the separation, fractionation, and primary upgrading of green chemicals from forest residues, wood chips, and chemical pulping liquors to be used as starting materials for current and novel value-added applications. It is targeted that by this means European forest and p ...
Voir le projet
22
Participants partenaires
TERMINÉ
Cost Efficient Advanced Leading Edge Structure 2 (COALESCE2)
Date du début: 1 avr. 2009, Date de fin: 31 mai 2012,
"The objective is to develop new integrated technology and design concepts for fixed leading edge structure to achieve greater than 30% reduction in recurring manufacturing and assembly cost compared to to-day’s highly fabricated structure. The Project will explore material and processing technology options for both metallic and composite structural solutions that will result in preferred concepts ...
Voir le projet
9
Participants partenaires
TERMINÉ
Development of wear resistant coatings based on complex metallic alloys for functional applications (appliCMA)
Date du début: 1 déc. 2008, Date de fin: 30 nov. 2011,
The project aims at the development of a new type of coatings based on Complex Metallic Alloys (CMA). This is a family of ternary and quaternary alloys which exhibit unexpected properties. The CMAs “Al61.5Cu25.3Fe12.2 B1” and “Al59.5Cu25.3Fe12.2 B3” consist only of metals, which show not metallic- but ceramic-like behaviour. Moreover, the bulk versions of these quasicrystals have proven outstandin ...
Voir le projet
19
Participants partenaires
TERMINÉ
GENeric European Sustainable Information Space for Environment (GENESIS)
Date du début: 1 sept. 2008, Date de fin: 31 août 2011,
The GENESIS Project has the objective of providing Environment management and Health actors with an innovative solution based on advanced ICT. Relying on interoperability standards and harmonization process, GENESIS helps to constitute complex information networks, by combining benefits of various information systems with a collaborative systems approach. The proposed generic solution allows easy ...
Voir le projet