Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Cost-reduction through material optimisation and Higher EnErgy outpuT of solAr pHotovoltaic modules - joining Europe’s Research and Development efforts in support of its PV industry (CHEETAH)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2017,

Europe has invoked the SET-Plan to design and implement an energy technology policy for Europe to accelerate the development and deployment of cost-effective renewable energy systems, including photovoltaics. With lower cost of solar electricity, PV could significantly contribute to the achievements of the 20-20-20 objectives.The Joint Program on PV of the European Energy Research Alliance (EERA-P ...
Voir le projet

 37

 TERMINÉ 

Avionics Systems Hosted on a distributed modular electronics Large scale dEmonstrator for multiple tYpe of aircraft (ASHLEY)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

In search for a more competitive, multiple types of aircrafts, IMA based, avionics platform solution, the European aerospace industry has recently initiated the IMA2G paradigm thanks to the EC funded SCARLETT project.This latter successfully validated a first underlying set of IMA2G concepts (Separate Core Processing resources from I/O resources, introduce resource segments typology of electronics ...
Voir le projet

 39

 TERMINÉ 

Materials for Ageing Resistant Li-ion High Energy Storage for the Electric Vehicle (MARS-EV)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

MARS-EV aims to overcome the ageing phenomenon in Li-ion cells by focusing on the development of high-energy electrode materials (250 Wh/kg at cell level) via sustainable scaled-up synthesis and safe electrolyte systems with improved cycle life (> 3000 cycles at 100%DOD). Through industrial prototype cell assembly and testing coupled with modelling MARS-EV will improve the understanding of the age ...
Voir le projet

 17

 TERMINÉ 

Resource and Energy Efficient Manufacturing (REEMAIN)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

REEMAIN combines cutting edge knowledge and experience from production processes, professional energy simulation, energy and resource planning, and renewable energy and storage to develop and demonstrate a methodology and platform for the boost, of efficiency resources.Based on the knowledge of who are the energy consumers in manufacturing REEMAIN offers 3 solutions. 1) Innovation in technologies ...
Voir le projet

 18

 TERMINÉ 

Configurable and Adaptable Trucks and Trailers for Optimal Transport Efficiency (TRANSFORMERS)

Date du début: 1 sept. 2013, Date de fin: 31 août 2017,

Today trucks are designed and optimised towards a limited variance set of usage and for maximum payload. Future trucks-trailers are easily adaptable for each freight, load and mission. And, in the operation phase, the vehicle combination automatically adjusts itself to the actual driving environment (i.e. traffic situation, topology, and payload). This option has large potential to contribute to t ...
Voir le projet

 14

 TERMINÉ 

Accelerated Checkpoint Design Integration Test and Evaluation (XP-DITE)

Date du début: 1 sept. 2012, Date de fin: 31 juil. 2017,

The aim of the XP-DITE project is to develop, demonstrate and validate a comprehensive, passenger centred approach to the design and evaluation of integrated security checkpoints (CPs) at airports. The approach encompasses a variety of different types of requirements, relating to security, airport operations and societal aspects. An ethical framework will be defined which enables designers and op ...
Voir le projet

 15

 TERMINÉ 

Advanced Forest Fire Fighting (AF3)

Date du début: 1 mai 2014, Date de fin: 30 avr. 2017,

In recent years, the frequency of large-scale forest fires has increased significantly owing to a number of factors including the effects of climate change, urbanisation, poor landscape management and malevolent acts. These so-called “Mega-fires” are particularly destructive and difficult to control with the technologies and systems currently available to fire fighters and emergency agencies. The ...
Voir le projet

 20

 TERMINÉ 

Lower the impact of aggravating factors in crisis situations thanks to adaptative foresight and decision-support tools (SNOWBALL)

Date du début: 1 mars 2014, Date de fin: 28 févr. 2017,

SnowBall is a €5M STREP R&D proposal of 36 months. Its overall objective is to increase preparedness and response capacities of decision-makers, emergency planners and first responders in respect to amplifying hazards in large disasters.SnowBall consists in a deep analysis of cascading effects and development of methods to anticipate them; and in a Decision Support System able to display current c ...
Voir le projet

 14

 TERMINÉ 

small Electric Passenger vehicle with maximized Safety and Integrating a Lightweight Oriented Novel body architecture (EPSILON)

Date du début: 1 nov. 2013, Date de fin: 28 févr. 2017,

As the global population gravitates towards increasingly large urban agglomerates, the density of movements and the sheer numbers of people displacements is growing so fast that existing vehicles for personal transport increasingly seem insufficient: consuming too much energy (present day cars), or exposing their drivers to larger-than-needed accident risks (motorcycles or bicycles). As especially ...
Voir le projet

 11

 TERMINÉ 

Constructing buildings with customizable size PV modules integrated in the opaque part of the building skin (CONSTRUCT-PV)

Date du début: 1 févr. 2013, Date de fin: 31 janv. 2017,

Construct-PV will develop and demonstrate customizable, efficient, and low cost BIPV for opaque surfaces of buildings. Opaque surfaces are selected because they represent massive wide-area spaces of untapped harvesting potential across Europe. To develop highly efficient systems, most promising PV technologies have been selected, i.e. back contact cells fabricated with MWT technology, extensively ...
Voir le projet

 12

 TERMINÉ 

The development of in silico process models for roll compaction (IPROCOM)

Date du début: 1 janv. 2013, Date de fin: 31 déc. 2016,

"Particulate materials, e.g. pharmaceutical formulations, precious metal, fine chemical, metal & ceramic powders, have been compacted to produce a wide range of particulate products in a number of industrial sectors. The diversity of particulate materials and the complexity of manufacturing processes make it a challenging task in product development and process design for particulate product manuf ...
Voir le projet

 10

 TERMINÉ 

End-user driven DEmo for cbrNe (EDEN)

Date du début: 1 sept. 2013, Date de fin: 31 déc. 2016,

The accidental or deliberate release of CBRNE materials are low probability events that can have a significant impact on citizens and society. Whenever and wherever they occur, they usually require a gradual and multi-facetted response as they tend to provoke severe and unexpected physical, psychological, societal, economical and political effects that cross EU-borders. Successful CBRNE resilience ...
Voir le projet

 47

 TERMINÉ 

Simulation framework for multi-scale phenomena in micro- and nanosystems (SimPhoNy)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2016,

Accurate design and modeling of nano-enabled systems requires a multi-scale simulation approach that can link phenomena on the nano-, micro-, meso-, and macroscales. Numerous simulation methods and tools are available for describing a material accurately and efficiently on each of the scales separately. In addition, several approaches for linking and coupling various hierarchal scales are also ava ...
Voir le projet

 13

 TERMINÉ 

"Exploring transitions pathways to sustainable, low carbon societies" (PATHWAYS)

Date du début: 1 déc. 2013, Date de fin: 30 nov. 2016,

"The ambitious EU policy goals to move to sustainable, resource efficient, low-carbon and climate-resilient and biodiversity rich societies requires substantial transitions in the energy system and land-use and food systems. Different scientific approaches offer different perspectives on transitions, each with strengths and weaknesses. The PATHWAYS project takes a step in coupling three scientific ...
Voir le projet

 10

 TERMINÉ 

Novel materials and system designs for low cost, efficient and durable PEM electrolysers (NOVEL)

Date du début: 1 sept. 2012, Date de fin: 30 nov. 2016,

Water electrolysis based on PEM technology has demonstrated its applicability to produce hydrogen and oxygen in a clean and safe way. Systems have been demonstrated in a wide range of niche applications with capacities from 70 % (LHV). The improved materials will also be made available to current developers of PEM electrolysers to allow them to quantify the benefits, and to provide early feedback ...
Voir le projet

 9

 TERMINÉ 

A cost effective and efficient approach for a new generation of solar dish-Stirling plants based on storage and hybridization (BIOSTIRLING-4SKA)

Date du début: 1 juin 2013, Date de fin: 30 nov. 2016,

In the context of the Energy SET-Plan of the European Commission relevant research and developments channelled to increase the percentage of renewable energy sources. It is crucial the collaboration of the Industry, SME’s and research institutions to bring together the step forward to finally integrate renewable energies as the main source of electricity.Renewable energies represent a wide field u ...
Voir le projet

 15

 TERMINÉ 

Efficient, large-area arbitrary shape solar energy (ArtESun)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2016,

The ArtESun project combines the multidisciplinary and complementary competences of top-level European research groups and industries in order to make significant steps towards high-efficiency >15%, stable and cost efficient OPV technology. For this purpose, the project objectives are set to make break-through advances in the state of the art in terms of (i) the development of innovative high effi ...
Voir le projet

 13

 TERMINÉ 

HIGH EFFICIENCY REAR CONTACT SOLAR CELLS AND ULTRA POWERFUL MODULES (HERCULES)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2016,

"The European photovoltaics PV market still represents the predominant share of worldwide installations and electricity generated from PV is becoming increasingly competitive, with an average levelized cost of energy (LCOE) estimated to be between 0.10–0.16 €/kWh in 2011 . This constant reduction of LCOE means that the European industry can only regain its competitiveness with (i) a concomitant re ...
Voir le projet

 16

 TERMINÉ 

Advanced High Volume Affordable Lightweighting for Future Electric Vehicles (ALIVE)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2016,

By bringing together 21 partners including 7 major carmakers, 7 major suppliers, 2 SME's and 5 academia / research centres, ALIVE will develop directly exploitable knowledge on materials and design concepts which offer a high potential for significantly reducing the weight of vehicles for affordable application to high productions volumes, focusing on next generation Electric Vehicles (EVs).Specif ...
Voir le projet

 26

 TERMINÉ 

Smart, lightweight, cost-effective and energy efficient windows based on novel material combinations (WINSMART)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2016,

The main goal of the project is to develop a smart window system that will contribute to meeting the energy efficiency targets of the building industry by 2020. This goal will be achieved through a new vacuum insulation glazing (VIG) solution combined with newly developed and robust switchable glazing systems mounted in durable and energy efficient sash and frame. The Energy Performance of Buildin ...
Voir le projet

 8

 TERMINÉ 

More Effective use of Renewables Including compact seasonal Thermal energy Storage (MERITS)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2016,

As Europe moves towards low and zero-carbon housing, challenges arise in the management of building integrated renewable energy technologies. Electricity generating RES have the benefit of electrical connection and financial mechanisms allowing feed-in to the network. Thermal technologies do not have such general interconnectivity and therefore rely on sizing typically meeting 90% of summer demand ...
Voir le projet

 11

 TERMINÉ 

Development of Systemic Packages for Deep Energy Renovation of Residential and Tertiary Buildings including Envelope and Systems (INSPIRE)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2016,

Most of the energy consumption in Europe is due to heating and cooling used for domestic, tertiary and industrial purposes; This energy is largely produced by directly burning fossil fuels with a negative environmental impact. RES directive and the SET Plan focuses its attention on the use of RES to drive systems for heating and cooling in order to reduce greenhouse gas emissions and the dependenc ...
Voir le projet

 24

 TERMINÉ 

Fabrication and Functionalization of BioMedical Microdevices (FaBiMed)

Date du début: 2 sept. 2013, Date de fin: 1 sept. 2016,

The aim of FaBiMed proposal is to improve and develop new manufacturing techniques, based on micromoulding, specific for biomedical microdevices. The project will be to reducing the cost of mass production of diagnosis and therapeutic micro devices which have a common problematic: medium sized batches, customization needs, micron-scale geometrical features. These include optofluidic sensors (MIR t ...
Voir le projet

 12

 TERMINÉ 

Next generation heat pump for retrofitting buildings (GREENHP)

Date du début: 1 déc. 2012, Date de fin: 31 août 2016,

The building sector is one of the key consumers of energy in Europe today with an overall rising trend over the past 20 years. In order to achieve the current EU 20-20-20 goals or the targets set in the EU Energy Roadmap 2050, it is essential to renovate and retrofit these buildings and to replace inefficient heating systems based on fossil fuels or direct electric heating. The proposed heat pump ...
Voir le projet

 11

 TERMINÉ 

FREsnel for Solar Heat with New Receiver and Geometry (FRESH NRG)

Date du début: 1 mars 2013, Date de fin: 31 août 2016,

FRESH NRG will target efficiency of 60% at 250°C with a Linear Fresnel Collector (LFC) optimized for industrial use. Our integrated approach will design, implement and test disruptive innovations in 4 key parts of the value chain.Highly innovative sol-gel coatings will target robustness, durability and performance (transmittance >96%, absorbtivity >95%, emissivity250°C 90 to limit heat losses. Ult ...
Voir le projet

 7

 TERMINÉ 

Development of physically based simulation chain for microstructure evolution and resulting mechanical properties focused on additive manufacturing processes (SIMCHAIN)

Date du début: 1 juil. 2013, Date de fin: 31 août 2016,

Powder bed based additive manufacturing processes belong to the key technologies of the future. They allow the production of complex shaped components from powder with nearly no waste. However, to optimize the process and the properties of the components, it is fundamental to identify reasonable process windows, ensuring part integrity and stable mechanical properties without giving up too much fl ...
Voir le projet

 3

 TERMINÉ 

Production Method Of Electrical Energy by Enhanced Thermal Electron Emission by the Use of Superior Semiconductors (PROME3THE2US2)

Date du début: 1 mai 2013, Date de fin: 30 avr. 2016,

The project aims to develop, validate and implement a novel solid-state conversion mechanism able to transform concentrated solar radiation into electric energy, at very high efficiency, with a direct conversion obtained by an enhanced electron emission from advanced semiconductor structures. Its application is in high-flux concentrating solar systems, characterized by presently mature optical tec ...
Voir le projet

 8

 TERMINÉ 

Enhanced Large scale Architecture with Safety and Security Technologies and special Information Capabilities (ELASSTIC)

Date du début: 1 mai 2013, Date de fin: 30 avr. 2016,

"The overall objective of the ELASSTIC project is to improve the security and resilience of large scale multifunctional building complexes to natural and man-made disasters by providing a methodology and tools which enable to include security and resilience from the early design and planning phase of such projects.The ELASSTIC concept proposed is based upon the following key features:1) A comprehe ...
Voir le projet

 9

 TERMINÉ 

COmplete Vehicle Energy-saving Technologies for Heavy-Trucks (CONVENIENT)

Date du début: 1 nov. 2012, Date de fin: 30 avr. 2016,

The CONVENIENT project targets a 30% reduction of fuel consumption in vehicles for long-distance freight transport by developing an innovative heavy-truck archetype featuring a suite of innovative energy-saving technologies and solutions.From the customer viewpoint, fuel efficiency is top priority because of its significant impact in terms of cost (in the EU, fuel represents about 30% of the Total ...
Voir le projet

 23

 TERMINÉ 

Global solar spectrum harvesting through highly efficient photovoltaic and thermoelectric integrated cells (GLOBASOL)

Date du début: 1 mars 2013, Date de fin: 29 févr. 2016,

GLOBASOL will develop new concepts, materials and devices for advanced light harvesting and light management for a panchromatic collection of the solar energy and an unprecedented power conversion efficiency. This will be accomplished by integrating in a single device three light-to-electricity converters, exploiting different regions of the solar spectrum based on sensitized mesoscopic solar cell ...
Voir le projet

 7

 TERMINÉ 

Visible-Light Active Metal Oxide Nano-catalysts for Sustainable Solar Hydrogen Production (SOLAROGENIX)

Date du début: 1 févr. 2013, Date de fin: 31 janv. 2016,

The rising global interest in hydrogen as the fuel of future has prompted tremendous interest in the development of efficient hydrogen production technologies that may serve as economically viable solutions towards solar fuels.The project SOLARGENIX will investigate novel nanostructured photocatalysts starting from comprehensive theoretical and experimental investigations on visible-light active m ...
Voir le projet

 9

 TERMINÉ 

Responsible Research and Innovation in a Distributed Anticipatory Governance Frame. A Constructive Socio-normative Approach (RES-AGORA)

Date du début: 1 févr. 2013, Date de fin: 31 janv. 2016,

The EU seeks to become a genuine Innovation Union in 2020 striving for excellent science, a competitive industry and a better society without compromising on sustainability goals as well as ethically acceptable and socially desirable conditions. Europe thus needs to develop a normative and comprehensive governance framework for Responsible Research and Innovation (RRI). This is the major goal of R ...
Voir le projet

 8

 TERMINÉ 

SEcure Cloud computing for CRitical infrastructure IT (SECCRIT)

Date du début: 1 janv. 2013, Date de fin: 31 déc. 2015,

"Cloud Computing is a style of computing where elastic IT-related capabilities are provided as optimized, cost-effective, and on-demand utility-like services to customers using Internet technologies. Being one of the major trends in the IT industry recently, it has gained tremendous momentum and started to revolutionize the way enterprises create and deliver IT solutions. As more sectors adopt clo ...
Voir le projet

 10

 TERMINÉ 

Explosive Neutralisation and Mitigation Countermeasures for IEDs in Urban/Civil Environment (ENCOUNTER)

Date du début: 1 sept. 2012, Date de fin: 30 nov. 2015,

"The objective for the ENCOUNTER project is to identify, explore and validate both existing and innovative techniques for mitigation and neutralisation of found Improvised Explosive Devises (IED) in urban/civil environment.ENCOUNTER will start off with revisiting actual practices. Relevant scenarios will be developed where different types of IEDs and different stand-off distances will be considere ...
Voir le projet

 7

 TERMINÉ 

Orchestration of Renewable Integrated Generation in Neighbourhoods (ORIGIN)

Date du début: 1 nov. 2012, Date de fin: 31 oct. 2015,

We will develop a sophisticated intelligent ICT system for the management of energy in a community, and associated business models, focussed on the concepts of aligning energy demand with the availability of renewables-based supply, addressing community goals for cost, carbon footprint and other objectives.-The system will comprise algorithms for prediction of demand and supply, optimization of en ...
Voir le projet

 9

 TERMINÉ 

Managing Risks of Nanoparticles (MARINA)

Date du début: 1 nov. 2011, Date de fin: 31 oct. 2015,

While there are standard procedures for product life cycle analysis, exposure, hazard, and risk assessment for traditional chemicals, is not yet clear how these procedures need to be modified to address all the novel properties of nanomaterials. There is a need to develop specific reference methods for all the main steps in managing the potential risk of ENM. The aim of MARINA is to develop such ...
Voir le projet

 54

 TERMINÉ 

Best Training for Green and Silent Mobility (GRESIMO) (GRESIMO)

Date du début: 1 oct. 2011, Date de fin: 30 sept. 2015,

"Engineering for future mobility must be inspired by ecology and economy to enable green and silent vehicles. Current university based education is focusing on classical fields like mechanical engineering on one side with some aspects of Noise, Vibration & Harshness (NVH) and Light Weight Design (LWD) or like electrical engineering covering aspects of “Electrification” & “Hybridisation” on the oth ...
Voir le projet

 9

 TERMINÉ 

A Novel Decision Support System for Intelligent Maintenance (IMAIN)

Date du début: 1 sept. 2012, Date de fin: 31 août 2015,

“iMain” is an European level research project aiming to develop a novel decision support system for predictive maintenance. To that end, a multi-layer solution integrating embedded information devices and artificial intelligence techniques for knowledge extraction and novel reliability & maintainability practices will be developed. The resulting solution will provide extended capabilities compared ...
Voir le projet

 9

 TERMINÉ 

Tactical Approach to Counter Terrorists in Cities (TACTICS)

Date du début: 1 sept. 2012, Date de fin: 31 août 2015,

TACTICS seamlessly integrates new research results in the area of behaviour analysis, characteristics of the possible urban-based targets and situational awareness into a decision making framework comprising of a coherent set of tools and related processes, supporting security forces in responding more efficiently and effective to a given threat in order to actually prevent the attack or to limit ...
Voir le projet

 11

 TERMINÉ 

Efficient use of resources in energy converting applications (EURECA)

Date du début: 1 juil. 2012, Date de fin: 31 août 2015,

EURECA develops the next generation of µ-CHP systems based on advanced PEM stack technology.The idea is to overcome the disadvantages of complex gas purification, gas humidification and the low temperature gradient for the heat exchangers in a heating system. EURECA will develop a new stack generation based on PEM technology with operating temperatures of 90°C to 120°C. Thus results in a less comp ...
Voir le projet

 9