Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Rewiring the Streptomyces cell factory for cost-effective production of biomolecules (STREPSYNTH)

Date du début: 1 déc. 2013, Date de fin: 30 nov. 2018,

STREPSYNTH aims to set-up a Streptomyces-based new industrial production platform (SNIP) for high value added biomolecules. Streptomyces lividans was chosen as a bacterial host cell because it has been already shown to be highly efficient for the extracellular production of a number of heterologous molecules that vary chemically, has a robust tradition of industrial fermentation and is fully acces ...
Voir le projet

 17

 TERMINÉ 

Direct Normal Irradiance Nowcasting methods for optimized operation of concentrating solar technologies (DNICAST)

Date du début: 15 oct. 2013, Date de fin: 14 oct. 2017,

Concentrating solar technologies (CST) have proven to be very efficient sources of “clean” power for the electrical grid. The efficient operation of concentrating solar technologies requires reliable forecasts of the incident irradiance for two main reasons. First, such forecasts yield a better management of the thermodynamic cycle because it becomes possible to dynamically fine tune some of its p ...
Voir le projet

 13

 TERMINÉ 

Increasing Capacity 4 Rail networks through enhanced infrastructure and optimised operations (CAPACITY4RAIL)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

In 2011, the White Paper on European Transport reasserted how fundamental transport was for society, for the mobility of European citizens and for the growth and vitality of the European economy.CAPACITY4RAIL will deliver research that is innovative, prepares rail for the future and takes into account results from previous research projects and programmes. The project builds on previous useable re ...
Voir le projet

 48

 TERMINÉ 

Developing a validated technology platform for the application of oxygen dependent enzymes in synthesis and transformation of alcohols (BIOOX)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

Currently the aerobic bio-catalytic oxidation reaction is the one that would have the biggest impact on the future uptake of industrial biotechnology in Europe. Chemical oxidation is both hazardous and has high environment impacts. Many oxidative bio-catalytic reactions and transformations have been identified in academic laboratories but only a very small number have been applied by industry to o ...
Voir le projet

 12

 TERMINÉ 

Embedded Multi-Core Systems for Mixed Criticality Applications in Dynamic and Changeable Real-Time Environments (EMC2)

Date du début: 1 avr. 2014, Date de fin: 30 juin 2017,

Embedded systems are the key innovation driver to improve almost all mechatronic products with cheaper and even new functionalities. Furthermore, they strongly support today's information society as inter-system communication enabler.Consequently boundaries of application domains are alleviated and ad-hoc connections and interoperability play an increasing role. At the same time, multi-core and ma ...
Voir le projet

 101

 TERMINÉ 

VitaminD3-Omega3-Home Exercise- HeALTHy Ageing and Longevity Trial (DO-HEALTH)

Date du début: 1 janv. 2012, Date de fin: 30 juin 2017,

As the European population is ageing rapidly, the growing number of seniors with age-related chronic diseases poses a challenge on European societies and health care systems. Therapeutic interventions that are effective, affordable and well-tolerated in the prevention of chronic disease are urgently needed and will have an outstanding impact on public health as a whole. Among the most promising in ...
Voir le projet

 25

 TERMINÉ 

A common European approach to the regulatory testing of nanomaterials (NANOREG)

Date du début: 1 mars 2013, Date de fin: 28 févr. 2017,

The innovative and economic potential of Manufactured Nano Materials (MNMs) is threatened by a limited understanding of the related EHS issues. While toxicity data is continuously becoming available, the relevance to regulators is often unclear or unproven. The shrinking time to market of new MNM drives the need for urgent action by regulators. NANoREG is the first FP7 project to deliver the answe ...
Voir le projet

 73

 TERMINÉ 

THE EUROPEAN GAME JAM LEARNING HUB (JamToday)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2016,

Game Jams have been organised for several years around the world and are a powerful instrument to stimulate innovation in the creation, development and deployment of educational games. Game Jam events are typically organised for 48 hours and simultaneously conducted in various locations. They offer the possibility to develop an idea into a potentially innovative solution around specific themes wh ...
Voir le projet

 25

 TERMINÉ 

COst & PERformaNces Improvement for Cgh2 composite tanks (COPERNIC)

Date du début: 1 juin 2013, Date de fin: 30 nov. 2016,

A certain level of maturity of on-board compressed gaseous storage systems have been demonstrated through large Fuel Cell Electric Vehicle (FCEV) deployment projects like Clean Energy Partnership (100+ FCEVs). In addition, major car companies have confirmed their intent to start production by 2015. Nevertheless, major issues still remain to be addressed:- VOLUME: Actual CGH2 tank production is far ...
Voir le projet

 8

 TERMINÉ 

Soft Matter at Aqueous Interfaces (SOMATAI)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2016,

Soft nanotechnology is generally considered as a field that will have a major impact on technological developments in near future. However, the fundamental understanding of the wealth of new structures lacks far behind, despite supporting activity from material science. Such an understanding is indispensable for sustainable growth of this important research domain and its applications. A physics-o ...
Voir le projet

 14

 TERMINÉ 

The Human Brain Project (HBP)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2016,

Understanding the human brain is one of the greatest challenges facing 21st century science. If we can rise to the challenge, we can gain profound insights into what makes us human, develop new treatments for brain diseases and build revolutionary new computing technologies. Today, for the first time, modern ICT has brought these goals within sight. The goal of the Human Brain Project, part of the ...
Voir le projet

 116

 TERMINÉ 

Applying Pilot Models for Safer Aircraft (A-PiMod)

Date du début: 1 sept. 2013, Date de fin: 31 août 2016,

The A-PiMod proposal addresses improved flight safety by proposing a new approach to human centred cockpit design, which expands the understanding of the human factor in joint human-machine system, taking into account increasing levels of operational complexity and new operational concepts (SESAR). The project will advance concepts for a fully adaptive and human centered automation, through the in ...
Voir le projet

 8

 TERMINÉ 

INTElligent FIXtures for the manufacturing of low rigidity components (INTEFIX)

Date du début: 1 juil. 2013, Date de fin: 30 juin 2016,

In the manufacturing industry, the machining of medium and big size parts with the required and suitable precision is a challenge, especially in high added value products manufactured in small or single-unit batches made of high performance materials like in aeronautic, space or energy sectors, where conventional process engineering and test/error methods are not completely efficient.INTEFIX aims ...
Voir le projet

 33

 TERMINÉ 

Factories of the Future Resources, Technology, Infrastructure and Services for Simulation and Modelling (FORTISSIMO)

Date du début: 1 juil. 2013, Date de fin: 30 juin 2016,

The importance of advanced simulation to the competitiveness of both large and small companies is well established. The principal objective of Fortissimo is to enable European manufacturing, particularly small to medium enterprises (SMEs), to benefit from the efficiency and competitive advantage inherent in the use of simulation. However, the simulation of, for example, high-pressure gas cylinders ...
Voir le projet

 96

 TERMINÉ 

Airway Disease PRedicting Outcomes through Patient Specific Computational Modelling (AirPROM)

Date du début: 1 mars 2011, Date de fin: 30 juin 2016,

The airways diseases asthma and chronic obstructive pulmonary disease affect over 400 million people world-wide and cause considerable morbidity and mortality. Airways disease costs the European Union in excess of €56 billion per annum. Current therapies are inadequate and we do not have sufficient tools to predict disease progression or response to current or future therapies. Our consortium, Air ...
Voir le projet

 40

 TERMINÉ 

Innovative SOFC Architecture based on Triode Operation (T-CELL)

Date du début: 1 sept. 2012, Date de fin: 29 févr. 2016,

"The development of Solid Oxide Fuel Cells (SOFCs) operating on hydrocarbon fuels (natural gas, biofuel,LPG) is the key to their short to medium term broad commercialization. The development of direct HC SOFCs still meets lot of challenges and problems arising from the fact that the anode materials operate under severe conditions leading to low activity towards reforming and oxidation reactions, f ...
Voir le projet

 8

 TERMINÉ 

Effective Communication in Outbreak Management: development of an evidence-based tool for Europe (E-COM@EU)

Date du début: 1 févr. 2012, Date de fin: 31 janv. 2016,

Although scientific knowledge to respond to outbreaks has increased, deficiencies remain in the ability of health authorities to communicate the need for large-scale measures such as vaccination and antiviral therapy and increase its acceptance. For effective behavioural and communication strategies, integration is needed of social, behavioural, communication and media sciences.We bring together t ...
Voir le projet

 13

 TERMINÉ 

Novel catalyst materials for the cathode side of MEAs suitable for transportation applications (CATHCAT)

Date du début: 1 janv. 2013, Date de fin: 31 déc. 2015,

Novel low temperature fuel cell (FC) cathode catalyst and support systems will be designed and synthesized. The focus will be on highly active catalyst materials for polymer electrolyte membrane fuel cells (PEMFC) for transportation applications.These materials will be fully characterized, benchmarked and validated with a multi-scale bottom up approach in order to significantly reduce the amount o ...
Voir le projet

 9

 TERMINÉ 

Daguerreobase

Date du début: 1 nov. 2012, Date de fin: 31 oct. 2015,

The daguerreotype was the first successful photographic process in the history of photography and can be seen as the'Incunabula of Photography'. On January 7, 1839, the daguerreotype was presented at the Académie des Sciences inParis. The daguerreotype is named after its inventor Louis-Jacques-Mandé Daguerre, was widely used in Europe and represents the first photographic images of Europe and its ...
Voir le projet

 18

 TERMINÉ 

Quantifying projected impacts under 2°C warming (IMPACT2C)

Date du début: 1 oct. 2011, Date de fin: 30 sept. 2015,

Political discussions on the European goal to limit global warming to 2°C demands that discussions are informed by the best available science on projected impacts and possible benefits. IMPACT2C enhances knowledge, quantifies climate change impacts, and adopts a clear and logical structure, with climate and impacts modelling, vulnerabilities, risks and economic costs, as well as potential respons ...
Voir le projet

 29

 TERMINÉ 

BRIDGE: Bridging resources and agencies in large-scale emergency management (BRIDGE)

Date du début: 1 avr. 2011, Date de fin: 30 juin 2015,

"The goal of BRIDGE is to increase safety of citizens by developing technical and organisational solutions that significantly improve crisis and emergency management. The key to this is to ensure interoperability, harmonization and cooperation among stakeholders on the technical and organisational level.Therefor BRIDGE delivers:- Resilient ad-hoc network infrastructures, focussing on the requireme ...
Voir le projet

 15

 TERMINÉ 

The Body-on-a-Chip (BoC) (BOC)

Date du début: 1 juin 2012, Date de fin: 31 mai 2015,

High attrition and failures rates in pharmaceutical and biotechnological drug development require a paradigm change towards more physiological human cell-based assays at an early time point in the process. The central idea of this proposal is to develop a versatile and reconfigurable pharmaceutical screening technology platform that relies on organotypic three-dimensional spherical microtissues. T ...
Voir le projet

 5

 TERMINÉ 

Latin Amercian Chinese European Galaxy Formation Network (LACEGAL)

Date du début: 15 mai 2011, Date de fin: 14 mai 2015,

The focus in cosmology is shifting from the determination of the basic cosmological parameters to developing an understanding of how galaxies formed. Progress in this field has been driven by a combination of computer simulation and observational breakthroughs. Over the next few years, groundbreaking new facilities will come online and will provide data of unprecedented quality with which to test ...
Voir le projet

 9

 TERMINÉ 

GaN-based normally-off high power switching transistor for efficient power converters (HiPoSwitch)

Date du début: 1 sept. 2011, Date de fin: 28 févr. 2015,

Highly efficient power electronics is needed for low volume and low weight future power conversion systems. The proposed project aims for the exploitation of novel gallium nitride (GaN) transistors for advanced switched power supplies. High voltage normally-off GaN power devices on Si substrates in vertical device architecture will be developed and its technology transferred to an European industr ...
Voir le projet

 9

 TERMINÉ 

Evaluating the Climate and Air Quality Impacts of Short-Lived Pollutants (ECLIPSE)

Date du début: 1 nov. 2011, Date de fin: 28 févr. 2015,

ECLIPSE aims to develop and assess effective emission abatement strategies for short-lived climate agents in order to provide sound scientific advice on how to mitigate climate change while improving the quality of air. Current climate policy does not consider a range of short-lived gases and aerosols, and their precursors (including nitrogen oxides, volatile organic compounds, sulphate, and black ...
Voir le projet

 11

 TERMINÉ 

Development of a practical and reliable ash melting test for biomass fuels, in particular for wood pellets (ASHMELT)

Date du début: 1 janv. 2012, Date de fin: 31 déc. 2014,

The utilisation of renewable energy sources is a considerable contribution to the EU 2020 targets, and the utilisation of solid biomass for heat production is of great relevance in this regard. The market for solid biofuels is growing rapidly, and the demand for raw materials is increasing. Consequently it is aimed at extending the raw material basis for biofuel production covering also wooden mat ...
Voir le projet

 13

 TERMINÉ 

Damage risk assessment, economic impact and mitigation strategies for sustainable preservation of cultural heritage in the times of climate change (CLIMATE FOR CULTURE)

Date du début: 1 nov. 2009, Date de fin: 31 oct. 2014,

Climate change is one of the most critical global challenges of our time which also threatens cultural heritage. As a non-renewable important resource to the European identity, sustainable adaptation strategies are required for long term preservation. For this purpose and for the first time ever, the CLIMATE FOR CULTURE project will couple completely new high resolution (10x10km) climate change ev ...
Voir le projet

 28

 TERMINÉ 

Harmonised eCall European Pilot (HeERO)

Date du début: 1 janv. 2011, Date de fin: 30 juin 2014,

The HeERO project will prepare, carry-out and coordinate eCall pre-deployment pilots at European level taking into account the approved standards. The overall project objective is to prepare for the deployment of the necessary infrastructure in Europe with the aim of making the Pan-European in-vehicle emergency call service eCall a reality.In order to address the eCall interoperability which would ...
Voir le projet

 39

 TERMINÉ 

Sea Border Surveillance (SeaBILLA)

Date du début: 1 juin 2010, Date de fin: 28 févr. 2014,

The SeaBILLA proposal aims to 1) define the architecture for cost-effective European Sea Border Surveillance systems, integrating space, land, sea and air assets, including legacy systems; 2) apply advanced technological solutions to increase performances of surveillance functions; 3) develop and demonstrate significant improvements in detection, tracking, identification and automated behaviour an ...
Voir le projet

 29

 TERMINÉ 

Control of Light Use Efficiency in Plants and Algae - From Light to Harvest (HARVEST)

Date du début: 1 oct. 2009, Date de fin: 30 sept. 2013,

"Photoprotection against excess absorbed light energy is an essential and universal attribute of oxygenic photosynthetic organisms. This requirement has been a strong force in the evolution of plants and micro-organisms, and a diverse range of solutions have arisen. It has determined survival, productivity and habitat preference, and it determines the ceiling on the efficiency of energy conversion ...
Voir le projet

 18

 TERMINÉ 

Safety and Protection of built Infrastructure to Resist Integral Threats (SPIRIT)

Date du début: 1 août 2010, Date de fin: 31 juil. 2013,

"Terrorist attacks by bombing or CBR-agents are threats with a low probability but with disastrous consequences. There is strong need to protect people, the societal community and critical infrastructures and utilities against being damaged, destroyed or disrupted by deliberate acts of terrorism. Solutions have to be derived to realize sufficient resilience of the urban infrastructure for rare occ ...
Voir le projet

 11

 TERMINÉ 

BARDiag - Biomarker tests for early cancer detection (BARDiag)

Date du début: 1 déc. 2010, Date de fin: 31 mars 2013,

Colorectal cancer and lung cancer cause millions of death each year. Currently there is no suitable non-invasive method for the early detection of these types of cancer. The tumour suppressor gene BARD1 (BRCA1-associated RING domain protein) is aberrantly expressed in several types of cancer and could be a diagnostic target for early cancer diagnosis in blood samples. The overall objective of the ...
Voir le projet

 8

 TERMINÉ 

High quality meat-like products - from niche markets to widely accepted meat alternatives (LikeMeat)

Date du début: 1 nov. 2010, Date de fin: 28 févr. 2013,

Several environmental and health-promoting issues substantiate the shift from an animal protein – in particular meat – to a vegetable protein based diet. Although meat analogues have attracted increasing industry and consumer attention, the market for these products is still very small. This is probably due to the fact that commercial available meat analogues - in particular their sensory qualitie ...
Voir le projet

 15

 TERMINÉ 

An intelligent modular domestic heating and hot water platform that enables effective integration and use of renewable energy systems (SmartHeat)

Date du début: 1 janv. 2010, Date de fin: 31 janv. 2013,

We the SME AGs, represent the European SMEs involved in the design, manufacture and installation of heating, hot water and renewable energy systems (RES). Increasing the uptake of RES is crucial if Europe is to achieve ambitious energy and emission reduction targets. However, despite steep increases in energy prices the uptake of domestic RES is still very limited. The initial investment required ...
Voir le projet

 14

 TERMINÉ 

European Planetology Network Research Infrastructure (EuroPlaNeT RI)

Date du début: 1 janv. 2009, Date de fin: 31 déc. 2012,

The Europlanet RI project will provide the European planetary science community with a unique research infrastructure, combining access to a suite of state of the art facilities while fostering their joint development and integration in terms of capacity and performance. This research infrastructure will include access to laboratory and field site facilities, advanced modelling, simulation and dat ...
Voir le projet

 28

 TERMINÉ 

Development of New Tool Materials with Tailored Thermomechanical Properties (TailorTool)

Date du début: 1 déc. 2009, Date de fin: 30 nov. 2012,

Improving tool behaviour can optimise forming processes undergoing severe thermomechanical solicitations which are used to obtain high performance components. FGM are particularly appropriate for developing high performance tools since they allow this optimization through a graded variation of their properties. This project aims to develop a new generation of FGM with: •Functionally graded thermal ...
Voir le projet

 5

 TERMINÉ 

Future High-Altitude High-Speed Transport 20XX (FAST20XX)

Date du début: 1 déc. 2009, Date de fin: 30 nov. 2012,

"The current project aims at the investigation and development of technologies and steps necessary for approaches to conquer the grey zone between aeronautics and space in Europe, and thus to set the foundation of a new paradigm for transportation in the long term. The underlying concepts considered are a) a European space plane based on an airplane launch approach to advance European know how in ...
Voir le projet

 17

 TERMINÉ 

Pilot Demonstration of Eleven 7MW-Class WEC at Estinnes in Belgium (7MW-WEC-BY-11)

Date du début: 1 août 2008, Date de fin: 31 juil. 2012,

This action focuses on demonstrating the development of a cost-effective large scale high capacity wind park using new state-of-the-art multi megawatt turbines coupled with innovative technology used to stabilize the grid. A key objective of the ‘7-MW-WEC-by-11’ project is to introduce a new power class of large-scale Wind Energy Converters, the 7MW WEC, onto the market which has the potential to ...
Voir le projet

 10

 TERMINÉ 

Logistics Industry Coalition for Long-term, ICT-based Freight Transport Efficiency (Logistics for LIFE)

Date du début: 1 janv. 2010, Date de fin: 30 juin 2012,

Logistics for LIFE brings together leading logistic companies, technology providers and research organizations working on innovative ICT solutions to ensure long-term sustainability of the logistic industry by increasing its operational efficiency. The project is motivated by freight transport heavy reliance on fossil fuel, its contribution to CO2 emissions and by its impact on the environment and ...
Voir le projet

 19

 TERMINÉ 

Thin Interconnected Package Stacks (TIPS)

Date du début: 8 sept. 2008, Date de fin: 7 mars 2012,

The project TIPS aims at the conflation of embedding technologies for electronic components into extremely thin packages and the interconnection of those packages into stacked electronic systems. The testing of individual packages before stacking is performed will mitigate stacked package yield issues.Embedding of components will be developed starting from a basis of different technical approaches ...
Voir le projet

 6