Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Sharing Cities (SHAR-LLM)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2020,

Sharing Cities has four key objectives. 1) To achieve scale in the European smart cities market by proving that properly designed smart city solutions, based around common needs, can be integrated in complex urban environments. This will be done in a way that exhibits their true potential and allows for the significant scale-up and consequent increase in social, economic and environmental value. ...
Voir le projet

 36

 TERMINÉ 

Transforming the future of agriculture through synthetic photorespiration (FutureAgriculture)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2020,

For a new green revolution to feed the continually increasing population, agriculture productivity will have to be significantly improved. Photorespiration represents a big challenge in this respect, because it dissipates energy and leads to the futile loss of CO2, thereby limiting plant growth yield. Implementing an efficient metabolic bypass for photorespiration can therefore increase the photos ...
Voir le projet

 6

 TERMINÉ 

European AIDS Vaccine Initiative 2020 (EAVI2020)

Date du début: 1 nov. 2015, Date de fin: 31 oct. 2020,

HIV-1 is responsible for a global pandemic of 35 million people, and continues to spread at a rate of >2 million new infections/year. It is widely acknowledged that a protective vaccine would be the most effective means to reduce HIV-1 spread and ultimately eliminate the pandemic, while a therapeutic vaccine may help mitigate the clinical course of disease and lead to strategies of viral eradicati ...
Voir le projet

 27

 TERMINÉ 

Soot Processes and Radiation in Aeronautical inNOvative combustors (SOPRANO)

Date du début: 1 sept. 2016, Date de fin: 31 août 2020,

For decades, most of the aviation research activities have been focused on the reduction of noise and NOx and CO2 emissions. However, emissions from aircraft gas turbine engines of non-volatile PM, consisting primarily of soot particles, are of international concern today. Despite the lack of knowledge toward soot formation processes and characterization in terms of mass and size, engine manufactu ...
Voir le projet

 18

 TERMINÉ 

Cloud-MicroPhysics-Turbulence-Telemetry: An inter-multidisciplinary training network for enhancing the understanding and modeling of atmospheric clouds (COMPLETE)

Date du début: 1 juin 2016, Date de fin: 31 mai 2020,

Clouds are the largest source of uncertainty in weather prediction, climate science, and remain a weak link in modeling atmospheric circulation. This is rooted in the fact that clouds depend on the physical and chemical processes over a huge range of scales, from the collisions of micron-sized droplets and particles to the airflow dynamics on the scales of thousands of meters. Since ambiguities re ...
Voir le projet

 9

 TERMINÉ 

Sustainable CellulAr networks harVEstiNG ambient Energy (SCAVENGE)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2020,

Energy sustainability is key to future mobile networks due to their foreseen capacity upsurge. The objective of the ETN SCAVENGE (Sustainable CellulAr networks harVEstiNG ambient Energy) is to create a training network for early-stage researchers (ESRs) who will contribute to the design and implementation of eco-friendly and sustainable next-generation (5G) networks and become leaders in the relat ...
Voir le projet

 9

 TERMINÉ 

Pluggable Social Platform for Heritage Awareness and Participation (PLUGGY)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2019,

Pluggable Social Platform for Heritage Awareness and Participation (PLUGGY) will support citizens in shaping cultural heritage and being shaped by it. PLUGGY will enable them to share their local knowledge and everyday experience with others. The participation will include the contribution of cultural institutions and digital libraries, building extensive networks around a common interest in conn ...
Voir le projet

 10

 TERMINÉ 

Multimodal highly-sensitive PhotonICs endoscope for improved in-vivo COLOn Cancer diagnosis and clinical decision support (PICCOLO)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2019,

Colorectal cancer represents around one tenth of all cancers worldwide. Early and accurate diagnosis and precise intervention can increase cure rate up to 90%. Improved diagnostic techniques with enough sensitivity and specificity are required to allow in situ assessment, safe characterization and resection of lesions during clinical practice interventions.The multidisciplinary PICCOLO team propos ...
Voir le projet

 10

 TERMINÉ 

KONFIDO - Secure and Trusted Paradigm for Interoperable eHealth Services (KONFIDO)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,

KONFIDO advances the state of the art of eHealth technology with respect to four key dimensions of digital security, namely: data preservation, data access and modification, data exchange, and interoperability and compliance. To address the challenges of secure storage and exchange of eHealth data, protection and control over personal data, and security of health related data gathered by mobile de ...
Voir le projet

 16

 TERMINÉ 

EU Calculator: trade-offs and pathways towards sustainable and low-carbon European Societies (EUCalc)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,

EUCalc replies to topic a) Managing technology transition. The EUCalc project will deliver a much needed comprehensive framework for research, business, and decision making which enables an appraisal of synergies and trade-offs of feasible decarbonisation pathways on the national scale of Europe and its member countries + Switzerland. The novel and pragmatic modelling approach is rooted between p ...
Voir le projet

 14

 TERMINÉ 

EU-CHINA Lever for IPM Demonstration (EUCLID)

Date du début: 15 sept. 2015, Date de fin: 14 sept. 2019,

More sustainable pest management methods are needed in order to reduce the negative effects of pesticides on human health and the environment. The overall goal of EUCLID is to contribute to secure the production of food for the increasing worldwide population while developing sustainable production approaches to be used in the European and Chinese agriculture.The choice of the crops of interest in ...
Voir le projet

 19

 TERMINÉ 

Low Cost Materials Processing Technologies for Mass Production of Lightweight Vehicles (LoCoMaTech)

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

The overall aim of LoCoMaTech is, in the first place, to enable the novel HFQ® process, (patented by ICL) in its latest most advanced form, which includes 10 recently patented refining technologies (TRL4), to be used for the manufacture of lightweight, high strength body and chassis structures and components for low-cost vehicles, by establishing a prototype, full scale pilot production line (TRL6 ...
Voir le projet

 20

 TERMINÉ 

New aerospace advanced cost effective materials and rapid manufacturingtechnologies (MMTech)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2019,

This project will focus on the development of technologies and methodologies which have the potential to save costs and time across the whole life cycle of the aircraft (design, production, maintenance, overhaul, repair and retrofit), including for certification aspects. Moreover it will also target the integration of additional functions or materials in structural components of the aircraft, the ...
Voir le projet

 14

 TERMINÉ 

Lifecourse biological pathways underlying social differences in healthy ageing (LIFEPATH)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2019,

"The dramatic differentials in healthy ageing, quality of life and life expectancy between individuals of different socioeconomic groups, is a major societal challenge facing Europe. The overarching aim of the LIFEPATH project is to understand the determinants of diverging ageing pathways among individuals belonging to different socio-economic groups. This will be achieved via an original study de ...
Voir le projet

 18

 TERMINÉ 

Turning waste from steel industry into a valuable low cost feedstock for energy intensive industry (RESLAG)

Date du début: 1 sept. 2015, Date de fin: 28 févr. 2019,

The RESLAG project proposal is aligned with the challenges outlined in the call WASTE-1-2014: Moving towards a circular economy through industrial symbiosis. In 2010, the European steel industry generated, as waste, about 21.8 Mt of steel slag. The 76 % of the slag was recycled in applications such as aggregates for construction or road materials, but these sectors were unable to absorb the total ...
Voir le projet

 22

 TERMINÉ 

Effective Management of Pests and Harmful Alien Species - Integrated Solutions (EMPHASIS)

Date du début: 1 mars 2015, Date de fin: 28 févr. 2019,

EMPHASIS is a participatory research project addressing native and alien pests threats (insect pests, pathogens, weeds) for a range of both natural ecosystems and farming systems (field crops, protected crops, forestry, orchards and amenity plants).The overall goal is to ensure a European food security system and the protection of biodiversity and of ecosystems services while developing integrated ...
Voir le projet

 24

 TERMINÉ 

MANAGING THE EFFECTS OF MULTIPLE STRESSORS ON AQUATIC ECOSYSTEMS UNDER WATER SCARCITY (GLOBAQUA)

Date du début: 1 févr. 2014, Date de fin: 31 janv. 2019,

Water and water-related services are major components of the human wellbeing, and as such are major factors of socio-economic development in Europe; yet freshwater systems are under threat by a variety of stressors (organic and inorganic pollution, geomorphological alterations, land cover change, water abstraction, invasive species and pathogens. Some stressors, such as water scarcity, can be a st ...
Voir le projet

 27

 TERMINÉ 

Patient Empowerment through Predictive PERsonalised decision support (PEPPER)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2019,

This proposal is for a personalised decision support system for chronic disease management that will make predictions based on real-time data in order to empower individuals to participate in the self-management of their disease. The design will involve users at every stage to ensure that the system meets patient needs and raises clinical outcomes by preventing adverse episodes and improving lifes ...
Voir le projet

 7

 TERMINÉ 

Secure Big Data Processing in Untrusted Clouds (SecureCloud)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2018,

SecureCloud addresses the confidentiality, integrity and availability of applications executed in the cloud. Data at rest or in transit on the network is already nowadays protected by encryption. The main problem that we face is how to ensure the confidentiality of data while being processed. Our approach is based on upcoming hardware extensions of commodity CPUs like Intel's Secure Guard Extensio ...
Voir le projet

 8

 TERMINÉ 

MUltiSectoral Integrative approaches to CArdiac care (MUSICA)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2018,

MUltiSectoral Integrative approaches to CArdiac care – MUSICA - is proposed by a team of universities, companies and hospitals from 4 EU countries (Italy, United Kingdom, The Netherlands, Belgium). The main scope of MUSICA is to structure a new trans-sectoral and multidisciplinary network capable of developing research and technology with no barriers between academia, industries and clinicians in ...
Voir le projet

 10

 TERMINÉ 

80,000 TON/Y PRECOMMERCIAL INDUSTRIAL SCALE DEMONSTRATION PLANT ON SECOND GENERATION LIGNOCELLULOSIC ETHANOL (COMETHA)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2018,

The overall goal of COMETHA Project is the construction and operation of an integrated precommercial industrial facility for the production of 80,000 t/y of second generation bioethanol starting from lignocellulosic biomass (ethanol plant conversion yield: from 4.3 to 1) at Porto Marghera (VE, Italy). The plant will be the first in its kind at pre-commercial scale and will validate the innovative ...
Voir le projet

 5

 TERMINÉ 

Graphene-based disruptive technologies (GrapheneCore1)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2018,

This project is the second in the series of EC-financed parts of the Graphene Flagship. The Graphene Flagship is a 10 year research and innovation endeavour with a total project cost of 1,000,000,000 euros, funded jointly by the European Commission and member states and associated countries. The first part of the Flagship was a 30-month Collaborative Project, Coordination and Support Action (CP-CS ...
Voir le projet

 158

 TERMINÉ 

VALENCIA EMPLEA III

Date du début: 31 déc. 2016, Date de fin: 30 mars 2018,

VALENCIA EMPLEA III Consortium already has experience in the implementation of this project in the city of Valencia, and they have considered it suitable to contribute to socio-economic development of the city, through improving the employability of young people who participate in it once again.The socio-economic and labor situation in Valencia is still very serious as far as unemployment is conce ...
Voir le projet

 21

 TERMINÉ 

Strategies to develop effective, innovative and practical approaches to protect major European fruit crops from pests and pathogens (Dropsa)

Date du début: 1 janv. 2014, Date de fin: 28 févr. 2018,

The DROPSA consortium will create new knowledge and understanding of the damage and losses of fruit crops resulting from pests and pathogens, with a specific focus on the new and emerging threats due to Drosophila suzukii and quarantine pathogens Pseudomonas syringae, Xanthomonas fragariae and X. arboricola. The project will deliver a cost effective approach that can be widely implemented by the E ...
Voir le projet

 27

 TERMINÉ 

Asisttel en Europa

Date du début: 31 déc. 2016, Date de fin: 30 déc. 2017,

Asisttel en Europa is a project promoted and managed by Asisttel, organisation focused on services to the community, and trainingthe project consists in 9 weeks work experience for 30 students selected from vocational training courses implemented by Asisstel. countries where the internships will be possible are: Germany, Italy, Portugal, Ireland, and United Kingdom.Participants will develop intern ...
Voir le projet

 19

 TERMINÉ 

PHYSICAL ACTIVITY THROUGH SUSTAINABLE TRANSPORT APPROACHES (PASTA)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2017,

This project focuses on the systematic promotion and facilitation of active mobility (AM) (i.e. walking and cycling including the combination with public transport use) as an innovative approach to integrate physical activity (PA) into individuals’ everyday lives. In contrast to sports or exercise, AM requires less time and motivation, since AM provides both convenience as a mode of transport, and ...
Voir le projet

 18

 TERMINÉ 

Organic Bioelectronics (ORGBIO)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

Organic Bioelectonics is a new discipline which holds promise to shape, direct, and change future medical treatments in a revolutionary manner over the next decades. At the moment Europe has a unique leading position in this area, being almost all the world-leading groups in this field located in Europe and constituting the core of this international training network. However, realizing the promis ...
Voir le projet

 15

 TERMINÉ 

Advanced Immunization Technologies (ADITEC)

Date du début: 1 oct. 2011, Date de fin: 30 sept. 2017,

Vaccines so far have been developed mostly by following an empiric approach. To prevent and possibly cure unresolved and emerging infectious diseases we need to fully exploit the potential of the human immune system. Progress in science and technology makes it possible to achieve what was previously deemed impossible. The scope of this project is to produce knowledge necessary to develop novel and ...
Voir le projet

 53

 TERMINÉ 

Materials for Ageing Resistant Li-ion High Energy Storage for the Electric Vehicle (MARS-EV)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

MARS-EV aims to overcome the ageing phenomenon in Li-ion cells by focusing on the development of high-energy electrode materials (250 Wh/kg at cell level) via sustainable scaled-up synthesis and safe electrolyte systems with improved cycle life (> 3000 cycles at 100%DOD). Through industrial prototype cell assembly and testing coupled with modelling MARS-EV will improve the understanding of the age ...
Voir le projet

 17

 TERMINÉ 

Innovative Reuse of All Tyre Components in Concrete (ANAGENNISI)

Date du début: 1 janv. 2014, Date de fin: 30 juin 2017,

An estimated one billion tyres are discarded each year. Post-Consumer tyre arisings for EU countries (2010) are 3.4M tonnes per year. At the moment nearly 50% of all recycled tyres/components still end up as fuel, in low grade applications or in landfill.All tyre constituents (rubber, high strength steel cord and wire, high strength textile reinforcement) are high quality materials and deserve to ...
Voir le projet

 18

 TERMINÉ 

ACOREUROPA IV

Date du début: 1 juin 2015, Date de fin: 31 mai 2017,

ACOREUROPA is the institutional project of the town council of A Coruña which coordinates a local integrated Consortium through the provincial council office, 12 Public Training Centres and the city’s two associations of young business owners. > This project has two strategic objectives: 1. To create training opportunities in European countries which take-up the offer of professional technical tra ...
Voir le projet

 38

 TERMINÉ 

The genetic basis of meningococcal and other life threatening bacterial infections of childhood (EUCLIDS)

Date du début: 1 déc. 2011, Date de fin: 31 mai 2017,

Bacterial infection is the major cause of disability and death in children worldwide. We will use meningococcal disease (MD) as a model to understand genetic factors underlying susceptibility and severity of childhood bacterial infection which will then be applied to other childhood infections. We have established cohorts of patients with MD in Central and Southern Europe (CE,SE), UK and Africa as ...
Voir le projet

 16

 TERMINÉ 

Vaccination against Shigella and ETEC: novel antigens, novel approaches (STOPENTERICS)

Date du début: 1 nov. 2010, Date de fin: 30 avr. 2017,

To contribute to the development of vaccines against Shigella and ETEC for children of the developing world, STOPENTERICS will provide novel solutions by imposing a two-fold paradigm switch: (i) to break the dogma of serotype-specificity by inducing a cross-protective immunity (ii) to improve the immunogenicity of Shigella glycoconjugates by using synthetic oligosacharides mimicking the lipopolysa ...
Voir le projet

 20

 TERMINÉ 

Combined Efficient Large Scale Integrated Urban Systems (CELSIUS)

Date du début: 1 avr. 2013, Date de fin: 31 mars 2017,

...tive organizations, with track records both in creating technically and economically innovative demonstrators, as well as in understanding and overcoming the barriers for large scale deployment (e.g. Imperial College (UK), SP (S), TU Delft (NL), Cologne University of Applied Sciences (D), D’Appalonia (IT), LSE (UK)).CELSIUS has eight work packages targeting on the successful deployment of the 13 n ...
Voir le projet

 21

 TERMINÉ 

Imaging of Neuroinflammation in Neurodegenerative Diseases (INMiND)

Date du début: 1 mars 2012, Date de fin: 28 févr. 2017,

The goal of this proposal (INMiND) is to carry out collaborative research on molecular mechanisms that link neuroinflammation with neurodegeneration in order to identify novel biological targets for activated microglia, which may serve for both diagnostic and therapeutic purposes, and to translate this knowledge into the clinic. The general objectives of INMiND are:(i) to identify novel mechanisms ...
Voir le projet

 32

 TERMINÉ 

A FAST process and production system for high-throughput, highly flexible and cost-efficient volume production of miniaturised components made of a wide range of materials (Micro-FAST)

Date du début: 1 sept. 2013, Date de fin: 28 févr. 2017,

The aim of the project is to develop a completely new manufacturing system for the volume production of miniaturised components by overcoming the challenges on the manufacturing with a wide range of materials (metallic alloys, composites, ceramics and polymers), through: (i) developing a high-throughput, flexible and cost-efficient process by simultaneous electrical-forming and electric-fast-sinte ...
Voir le projet

 17

 TERMINÉ 

Water analytics and Intelligent Sensing for Demand Optimised Management (WISDOM)

Date du début: 1 févr. 2014, Date de fin: 31 janv. 2017,

Growing water demand caused by climate change, urbanization and population growth requires new business and technology platforms to manage the increased level of diversity and complexity of urban water resources management. The increasing variability of both supply and consumption will also require more sophisticated and optimized decision making.To achieve a step change in water and energy saving ...
Voir le projet

 13

 TERMINÉ 

Biomarkers For Enhanced Vaccine Safety (BIOVACSAFE)

Date du début: 1 mars 2012, Date de fin: 31 déc. 2016,

BioVacSafe is a concise consortium of selected academic, public, and SME participants used to co-working in industry-led projects, organised into focused Activity Cores to generate knowledge and tools to benchmark licensed vaccine reactogenicity, and create practical and generalizable guidelines and techniques to enhance immunosafety of novel vaccines from pre-development to post-marketing surveil ...
Voir le projet

 24

 TERMINÉ 

An industry system enabling the use of a patented materials processing technology for Low Cost forming of Lightweight structures for transportation industries (LoCoLite)

Date du début: 1 déc. 2013, Date de fin: 30 nov. 2016,

Environmental wellbeing backed by increasingly severe legislation dictates that pollution and energy consumption by automobiles must be reduced significantly. The outcomes of this project will enable both these imperatives to be achieved simultaneously. The project aim is to establish production lines in Europe that manufacture components for lightweight complex-shaped automobile body structures ...
Voir le projet

 16

 TERMINÉ 

MOVinVET

Date du début: 1 nov. 2014, Date de fin: 31 oct. 2016,

The MOVINVET project is targeting two main groups: training center's staff (short-time job shadowing in training centers) and young graduates that have obtained an accredited training certificate during the previous year to the departure (3 month internships). Hosting countries are Ireland, the United Kingdom, Germany, Italy, Lithuania and the Czech Republic. Job shadowing activities for staff wi ...
Voir le projet

 34