15 projets européens trouvés
Recherche sur 125080 projets européens
TERMINÉ
A FAST process and production system for high-throughput, highly flexible and cost-efficient volume production of miniaturised components made of a wide range of materials (Micro-FAST)
Date du début: 1 sept. 2013, Date de fin: 28 févr. 2017,
The aim of the project is to develop a completely new manufacturing system for the volume production of miniaturised components by overcoming the challenges on the manufacturing with a wide range of materials (metallic alloys, composites, ceramics and polymers), through: (i) developing a high-throughput, flexible and cost-efficient process by simultaneous electrical-forming and electric-fast-sinte ...
Voir le projet
17
Participants partenaires
TERMINÉ
Development of materials, processes, and means to enable the application of Piezoelectric materials in aero engine controls (AEROPZT)
Date du début: 12 mai 2014, Date de fin: 11 mai 2016,
The ACARE targets for civil aircraft include NOx and CO2 emissions reductions of 80% and 50% respectively by 2020. Although airframes make a significant contribution, most of the balance (especially NOx) will be contributed by the engines. These contributions are expected to be achieved by lean burn, increased propulsive efficiency and increments in cycle efficiency via reduced component losses. ...
Voir le projet
5
Participants partenaires
TERMINÉ
Valve hIgh PERformances for flow control separation in aircraft (VIPER)
Date du début: 1 nov. 2012, Date de fin: 30 avr. 2016,
"The Clean Sky call (CS-SFWA) requests the development, manufacturing and test of a mock-up of a flow control actuator subsystem. The mock-up shall simulate a flight-ready actuator prototype for controlling flow separation on the high lift devices of transport and business aircraft.CEDRAT TECHNOLOGIES (coordinator, SME) and ONERA/GMT/DERM (Major Sub Contractor, Research Establishment) forms a cons ...
Voir le projet
1
Participant partenaire
TERMINÉ
Smart Technologies for Transport Safety - Innovation Cluster Nesting (SMART-NEST)
Date du début: 1 janv. 2012, Date de fin: 31 déc. 2015,
The main objective of the proposed project is to establish a European-level vibrant training environment in a rapidly emerging research field at the crossroads of structural engineering and smart technologies. The participants link up their cross-sectoral expertise to support their researchers in pursuing an interdisciplinary career and to provide them with a cohesive training environment. The pro ...
Voir le projet
6
Participants partenaires
TERMINÉ
Innovative Methods of Separated Flow Control in Aeronautics (IMESCON)
Date du début: 1 mai 2011, Date de fin: 30 avr. 2015,
"The IMESCON network is a high quality training network to produce well qualified researchers in the area of active flow control and new helicopter technology. This training programme of best quality early stage and experienced researchers from industry and academia will combine expertise from fluid dynamics, composite material, Micro Electro Mechanical Systems (MEMS), experimental techniques and ...
Voir le projet
6
Participants partenaires
TERMINÉ
Plug and Produce Joint Interface Modules (PoPJIM)
Date du début: 1 sept. 2010, Date de fin: 31 août 2014,
PoPJIM identifies critical performance limiting problems in machine tool design and use. The project idea is based on two crucial innovative solutions: i) replacing conventional machine tool structural joint interfaces by a self configuring and optimising mechatronic module called Joint Interface Module, JIM, made of functional materials and ii) a wireless network consisting of these modules and a ...
Voir le projet
10
Participants partenaires
TERMINÉ
Piezo Power Supply Module for Piezo Actuator Bench (PPSMPAB)
Date du début: 1 mai 2011, Date de fin: 30 avr. 2014,
"The Green Rotorcraft research Consortium of Clean Sky (CS-GRC) requests the development of a Piezo Power Supply module (PPS) and the associated Man Machine Interface (MMI).CEDRAT (coordinator, SME) and UJF-G2ELAB (partner, lab from Grenoble Joseph Fourier University) forms a consortium using their shared experience on piezoelectric actuators and high efficiency high power supplies to meet the GRC ...
Voir le projet
2
Participants partenaires
TERMINÉ
A pilot line of antibacterial and antifungal medical textiles based on a sonochemical process (SONO)
Date du début: 1 oct. 2009, Date de fin: 30 sept. 2013,
Hospital-acquired (nosocomial) infections are a major financial issue in the European healthcare system. The financial impact of these infections counteract medical advances and expensive medical treatments by increasing the length of hospital stay by at least 8 days on average per affected patient, hence adding more than 10 millions patient days in hospitals in Europe per year. The statistics on ...
Voir le projet
17
Participants partenaires
TERMINÉ
PARYLENE based artificial smart LENSes fabricated using a novel solid-on-liquid deposition process (PARYLENS)
Date du début: 1 oct. 2010, Date de fin: 30 sept. 2013,
The main goal of the project PARYLENS is to develop the next generation optical devices, based on an innovative and reliable concept inspired by natural optical systems such as the human and the fly eyes. We propose the following devices to the European citizen and industry: 1) tuneable lenses 2) truly accommodative intraocular lenses 3) bistable flexible displays The development of those devices ...
Voir le projet
13
Participants partenaires
TERMINÉ
Plug and Produce Components for Optimum Dynamic Performance Manufacturing Systems (DYNXPERTS)
Date du début: 1 juil. 2010, Date de fin: 30 juin 2013,
Self-sufficient intelligent plug-and-produce components with advanced sensing and actuating functionalities, e.g. based on smart materials. Able to adapt their range of properties, depending on the changing process conditions. Use vibration for energy harvesting to drive the intelligent system. Smart materials: compensation of static and / or thermally induced dislocations, vibration damping and d ...
Voir le projet
12
Participants partenaires
TERMINÉ
Machine for Microparts Moulding based on UltraSound excitation (SONO”R”US)
Date du début: 1 mai 2011, Date de fin: 30 avr. 2013,
"A breakthrough concept in the manufacture of plastic micro and mini parts: the SONO“R”US Project will introduce into the market the first moulding machine based on the ultrasounds. Taking profit of previous results achieved by Sonoplast (Collaborative Project from the FP7), SONO“R”US intends to develop an optimized, ready-to-market ultrasonic moulding machine.Following an increasing trend in mini ...
Voir le projet
5
Participants partenaires
TERMINÉ
Self-Learning Sheet Metal Forming System (LearnForm)
Date du début: 1 avr. 2009, Date de fin: 31 mars 2012,
The automotive and white goods market tends towards individual customer solutions with product variants in small batch production, for which the forming system needs special setups, parameter change in self-learning control systems and high skilled operators. The self-learning sheet metal forming system LearnForm aims at an innovative knowledge-based drawing process with integrated multi sensors a ...
Voir le projet
8
Participants partenaires
TERMINÉ
Production Dependent Adaptive Machine Tool (CHAMELEON)
Date du début: 1 déc. 2008, Date de fin: 30 nov. 2011,
Machine tools are a key component in industrial production processes as they provide an important contribution to the added value of manufactured products. They are based on mechanical structures conceived as a result of optimised designs in order to achieve the required performances for each one of the machining processes. The relatively recent irruption of mechatronic concepts, which take advan ...
Voir le projet
12
Participants partenaires
TERMINÉ
In-situ wireless monitoring of on- and offshore WINd TURbine blades using energy harvesting technology (WINTUR)
Date du début: 1 juil. 2009, Date de fin: 31 août 2011,
"This project will develop an integrated system to monitor continuously the condition of wind turbine blades, without human intervention on site, using a novel integration of acoustic emission (AE) and long range ultrasonics (LRU). The system will use flexible light weight sensors. It will not be hardwired, deriving its power from energy harvested from the continuous flexing of the blade and trans ...
Voir le projet
12
Participants partenaires
TERMINÉ
New Process and Machinery for Microparts Moulding based on Ultrasound excitation (SONOPLAST)
Date du début: 1 juin 2008, Date de fin: 31 mai 2010,
"The aim of Sonoplast is to enable a completely revolutionary concept of plastification and moulding process of micro and mini parts based on the use of ultrasounds to respond flexibly, reliably and cost effectively to the need of micro system suppliers for the production of complex shaped and functional μ-parts. The objective of the Sonoplast project is the development and construction of the fir ...
Voir le projet