Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

ERA-NET for materials research and innovation (M-ERA.NET 2)

Date du début: 1 mars 2016, Date de fin: 28 févr. 2021,

...hnologies.A large network of 43 national and regional funding organisations from 23 EU Members States and Associated States and 5 countries outside Europe will implement joint calls to fund excellent innovative transnational RTD cooperation, including one call for proposals with EU co-funding and additional non-cofunded calls. Continuing the activities started under the predecessor project M-ERA.N ...
Voir le projet

 43

 TERMINÉ 

GaN densily integrated with Si-CMOS for reliable, cost effective high frequency power delivery systems (GaNonCMOS)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

Power electronics is the key technology to control the flow of electrical energy between source and load for a wide variety of applications from the GWs in energy transmission lines, the MWs in datacenters that power the internet to the mWs in mobile phones. Wide band gap semiconductors such as GaN use their capability to operate at higher voltages, temperatures, and switching frequencies with gr ...
Voir le projet

 11

 TERMINÉ 

Semiconductor-based Ultrawideband Micromanipulation of CAncer STEm Cells (SUMCASTEC)

Date du début: 1 janv. 2017, Date de fin: 30 juin 2020,

SUMCASTEC explores radically new approach for cancer stem cells (CSCs) real time isolation (i.e. within minutes vs current 40 days) and neutralization. A novel micro-optofluidic lab-on-chip (LOC) platform will be developed through a joint and iterative effort by biologists, clinicians and engineers. For the first time, a single LOC will be capable of delivering ultra-wide broadband radiation to co ...
Voir le projet

 6

 TERMINÉ 

Zorg verbindt

Date du début: 1 mars 2016, Date de fin: 28 févr. 2020,

Description (EN): On the one hand, the project Versorgung Verbindet focuses on the search for solutions regarding problems faced by citizens, the insured and patients. On the other hand, it concentrates on the effective and economic use of care facilities.Developments, such as the fast increase of chronic illnesses, the growing interest in health and wellness, the expecting labor sh ...
Voir le projet

 39

 TERMINÉ 

Directly Modulated Lasers on Silicon (DIMENSION)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2020,

... bonding and growing ultra-thin III-V structures onto the silicon front-end-of-line, the active optical functions are embedded into the back-end of line stack. This offers great opportunities for new innovative devices and functions at the chip-level but also for the assembly of such silicon devices. As processing takes place on silicon wafers, this project has the unique opportunity to bring the ...
Voir le projet

 6

 TERMINÉ 

Advanced Regenerative and REStorative Therapies to combat corneal BLINDNESS (ARREST BLINDNESS)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

Over 30 million Europeans are blind or visually impaired, leading to reduced quality of life and a tremendous loss of productivity in society. Corneal blindness is the second largest cause of blindness globally and while treatable, millions remain unnecessarily blind due to issues of access to transplantable tissue, lack of standardized treatments, and the lag in translating new regenerative medic ...
Voir le projet

 14

 TERMINÉ 

EnhANcing emergencY management and response to extreme WeatHER and climate Events (ANYWHERE)

Date du début: 1 juin 2016, Date de fin: 31 août 2019,

...enhance their anticipation and pro-active capacity of response to face extreme and high-impact weather and climate events. This will be achieved through the operational implementation of cutting-edge innovative technology as the best way to enhance citizen's protection and saving lives.ANYWHERE proposes to implement a Pan-European multi-hazard platform providing a better identification of the expe ...
Voir le projet

 32

 TERMINÉ 

Standardised approaches and products for the systemic retrofit of residential Buildings, focusing on HEATing and cooling consumptions attenuation. (BuildHEAT)

Date du début: 1 sept. 2015, Date de fin: 31 août 2019,

...h on the manufacturers’ and the professionals’ side.BuildHEAT addresses this challenging sector by:- elaborating systemic packages for the deep rehabilitation of residential buildings- developing innovative technologies facilitating the implementation of the renovation measures- developing financial tools enabling large public and private investments - involving the construction chain from the ver ...
Voir le projet

 18

 TERMINÉ 

PHotonic REServoir COmputing (PHRESCO)

Date du début: 1 nov. 2015, Date de fin: 30 avr. 2019,

...tworks based integrated photonic circuits were demonstrated. The PHRESCO project aims to bring photonic reservoir computing to the next level of maturity. A new RC chip will be co-designed, including innovative electronic and photonic component that will enable major breakthrough in the field. We will i) Scale optical RC systems up to 60 nodes ii) build an all-optical chip based on the unique elec ...
Voir le projet

 5

 TERMINÉ 

Large scale micro-and nanofabrication technologies for bioanalytical devices based on R2R imprinting (R2R Biofluidics)

Date du début: 1 févr. 2015, Date de fin: 31 janv. 2019,

Roll-to-roll (R2R) technologies are mature core processes in manufacturing lines for graphical printing industry. In several other areas (e.g. electronics or optics) R2R techniques are emerging, being expected to notably lower the unit prices of flexible devices. In particular, recently developed roller-based nanoimprinting methods enable unrivalled throughput and productivity for precise fabricat ...
Voir le projet

 10

 TERMINÉ 

Innovative Product for train door condition monitoring based on vibration analysis algorithms (VA-RCM)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2018,

...ts. To overcome this, a consortium led by German SME Hitex, have come together with the aim to rapidly seize the business opportunity presented by commercializing the VA-RCM system.VA-RCM is a highly innovative condition monitoring system based on cutting-edge technology involving advanced vibration analysis techniques. Its unique features will enable accurate assessment of train door actuators as ...
Voir le projet

 5

 TERMINÉ 

SMILE - SMall Innovative Launcher for Europe (SMILE)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2018,

.... The project focuses on research and innovation to obtain European solutions enabling the development and realization of such a launcher system. Main objectives are to:• develop a concept for an innovative, cost-effective European launcher system for small satellites (target price below 50.000 Euro/kg)• design a Europe-based ground facility for these launcher systems• increase the Technology Read ...
Voir le projet

 14

 TERMINÉ 

Further linking Russia to the ERA: Coordination of MS/ AC S&T programmes towards and with Russia (ERA.NET RUS PLUS)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2018,

The Partnership for Modernisation between the European Union and Russia states as one of the priority areas to enhance cooperation in innovation, research and development. In this context the 24 consortium members of ERA.Net RUS Plus propose to implement a Single Joint Call for transnational and scientifically excellent research projects in the fields of Nanotechnologies/Materials/Production Techn ...
Voir le projet

 33

 TERMINÉ 

SPACE ETHERNET PHYSICAL LAYER TRANSCEIVER (SEPHY)

Date du début: 1 mai 2015, Date de fin: 31 juil. 2018,

The growing complexity of space systems is creating the need for high speed networking technologies to interconnect the different elements of a spacecraft. This interest has spurred initiatives by both ESA and NASA to define the next generation networking technologies for Space. In both cases, Ethernet has been the preferred choice due to its wide adoption in terrestrial applications and because i ...
Voir le projet

 6

 TERMINÉ 

Full scale demonstration of energy positive sewage treatment plant concepts towards market penetration (POWERSTEP)

Date du début: 1 juil. 2015, Date de fin: 30 juin 2018,

... existing technologies, sewage treatment plants could actually become a new source of renewable energy, without compromising the treatment performance.The project POWERSTEP aims at demonstrating such innovative concepts in first full scale references for each essential process step in order to design energy positive wastewater treatment plants with currently available technologies. The following p ...
Voir le projet

 16

 TERMINÉ 

Dynamically Reconfigurable Optical-Wireless Backhaul/Fronthaul with Cognitive Control Plane for Small Cells and Cloud-RANs (5G-XHaul)

Date du début: 1 juil. 2015, Date de fin: 30 juin 2018,

Small Cells, Cloud-Radio Access Networks (C-RAN), Software Defined Networks (SDN) and Network Function Virtualization (NVF) are key enablers to address the demand for broadband connectivity with low cost and flexible implementations. Small Cells, in conjunction with C-RAN, SDN, NVF pose very stringent requirements on the transport network. Here flexible wireless solutions are required for dynamic ...
Voir le projet

 12

 TERMINÉ 

"""2nd Generation Active Wing“ – Active Flow- Loads & Noise control on next generation wing" (AFLONEXT)

Date du début: 1 juin 2013, Date de fin: 31 mai 2018,

AFLoNext is a four year EC L2 project with the objective of proving and maturing highly promising flow control technologies for novel aircraft configurations to achieve a quantum leap in improving aircraft’s performance and thus reducing the environmental footprint. The project consortium is composed by forty European partners from fifteen countries. The work has been broken down into seven work p ...
Voir le projet

 41

 TERMINÉ 

PhD on Innovation Pathways for TES (INPATH-TES)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2018,

Following the EC SET-Plan Education and Training Roadmap, the concept of this proposal is to develop a joint PhD programme between universities and research centres, on the topic of Thermal Energy Storage (TES). The goal of INPATH-TES is to create a network of universities and research institutes to implement a joint PhD programme on TES technologies. The final result of such a network is to educa ...
Voir le projet

 22

 TERMINÉ 

Cyber Physical System based Proactive Collaborative Maintenance (MANTIS)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2018,

...or global decision making. The research addressed in MANTIS will contribute to companies' assets availability, competitiveness, growth and sustainability. Use cases will be the testing ground for the innovative functionalities of the proactive maintenance service platform architecture and for its future exploitation in the industrial world. Results of MANTIS can be utilised directly in several ind ...
Voir le projet

 47

 TERMINÉ 

European Bus System of the Future 2 (EBSF_2)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2018,

"The objective of the EBSF_2 project is to validate different innovative solutions that combine efficiency of the bus system with more attractiveness. Such solutions are meant to represent the most innovative in the areas indicated by the Call: the project will proceed to their final validation before their introduction in the market, avoiding pure simulations or large use of prototypes. Following ...
Voir le projet

 43

 TERMINÉ 

Development of highly-efficient low-emission log wood-fired closed fireplace INSERts thanks to an automated elecTRONIC control system (INSERTRONIC)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2018,

... heaters. Thereby, RIKA aims at strengthening its position as European technology leader as well as to double its turnover until 2022. A technical concept of the INSERTRONIC, which builds on RIKA’s innovative log wood stove technology, has already been defined. Within the project the new technology shall be developed, tested and optimised in order to pass type testing at project end. A number of i ...
Voir le projet

 1

 TERMINÉ 

PANACHE

Date du début: 2 janv. 2014, Date de fin: 2 janv. 2018,

...ers, High security applications and general Electronics :The PANACHE project objective is to set-up a pilot line for embedded Flash technology design and manufacturing platform for the prototyping of innovative µcontrollers in Europe.The current 40nm technology platform as well as the already defined 55nm technology platform will be developed and consolidated in order to build a solid manufacturin ...
Voir le projet

 21

 TERMINÉ 

Analysis, modelling and sensing of both physiological and environmental factors for the customized and predictive self-management of Asthma (myAirCoach)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2017,

... validation of the results is expected to lead to increased confidence in the myAirCoach approach and in ICT decision support and self-management systems in general. The impact of such a holistic and innovative approach is huge and the foundations laid here are expected to result in a widespread adoption of sensor-based self-management systems not only in asthma, but also in other respiratory dise ...
Voir le projet

 13

 TERMINÉ 

A Low Cost Active Debris Removal Demonstration Mission (REMOVEDEBRIS)

Date du début: 11 nov. 2013, Date de fin: 11 nov. 2017,

A huge amount of debris has progressively been generated since the beginning of the space era. Most of the objects launched into space are still orbiting the Earth and today these object and their by-products represent a threat both in space and on Earth. In Space, debris lead to collisions and therefore to damages to operational satellites. For both issues, a credible solution has emerged over th ...
Voir le projet

 11

 TERMINÉ 

Experience For Training

Date du début: 1 nov. 2015, Date de fin: 31 oct. 2017,

...read further thanks to the website, mailing list, leaflets and associated activities, carried out by Aspire I Limited for UK, EVT in Italy, BEST for Austria, AID for Belgium, SPI for Portugal and Innovative Educators Association for Turkey. Partners' European networks will be used as dissemination channels and mainstreaming action at International level.
Voir le projet

 6

 TERMINÉ 

LOGRO-EUROPA

Date du début: 1 sept. 2016, Date de fin: 31 oct. 2017,

Logroño has a youth unemployment rate of around 32%, which is unacceptable from every point of view and against which we must fight with all means to reduce it to a "reasonable" level. Thus, the local young population has pressing needs related to lack of experience and job opportunities that justify the existence of LOGRO-EUROPA project whose main objective is to promote the employment of local y ...
Voir le projet

 20

 TERMINÉ 

An international network of 50 CubeSats for multi-point, in-situ measurements in the lower thermosphere and re-entry research (QB50)

Date du début: 1 nov. 2011, Date de fin: 31 oct. 2017,

The QB50 Project will demonstrate the possibility of launching a network of 50 CubeSats built by CubeSat teams from all over the world to perform first-class science and in-orbit demonstration in the largely unexplored middle and lower thermosphere. Space agencies are currently not pursuing a multi-spacecraft network for in-situ measurements in the middle and lower thermosphere because the cost of ...
Voir le projet

 17

 TERMINÉ 

TFP Strut Qualification (SPS_TFP_SQ)

Date du début: 1 oct. 2015, Date de fin: 30 sept. 2017,

This proposal aims at qualification by extensive testing of market relevant carbon fibre struts manufactured with the tailored fibre placement (TFP) technology up to TRL 8 for space applications.A strut is a very common structural element in launchers and satellites. The main novelty of the proposed solution is that even the fittings are carbon (state-of-the-art is metal).The requirements and mark ...
Voir le projet

 4

 TERMINÉ 

Distributed REal-Time Architecture for Mixed Criticality Systems (DREAMS)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

The objective of DREAMS is to develop a cross-domain architecture and design tools for networked complex systems where application subsystems of different criticality, executing on networked multi-core chips, are supported.DREAMS will deliver architectural concepts, meta-models, virtualization technologies, model-driven development methods, tools, adaptation strategies and validation, verification ...
Voir le projet

 16

 TERMINÉ 

Nano-carbons for versatile power supply modules (NANOCATE)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

...ld applications like pulsed sensors or mobile electronic devices.The integration of the developed materials into harvester and storage devices is a further step to characterize the performance of the innovative materials. Finally, a demonstrator consisting of harvester, storage and energy management represents a self-sustaining, universally usable, and maintenance-free power supply. The project wi ...
Voir le projet

 14

 TERMINÉ 

Balancing energy production and consumption in energy efficient smart neighbourhoods (e-balance)

Date du début: 1 oct. 2013, Date de fin: 31 juil. 2017,

Energy efficiency becomes crucial for rational consumption of the available resources and reduction of the CO2 production. But the reduction of energy consumption as the only remedy is only a partial solution. Similar, applying more environment-neutral or renewable energy sources without smart management systems may even cause failures in the energy grid or at least cause the energy to be wasted. ...
Voir le projet

 12

 TERMINÉ 

Scalable & Low-Power Microwave Photonics for Flexible, Terabit Telecom Payloads & High-speed Coherent Inter-satellite Links (BEACON)

Date du début: 2 oct. 2013, Date de fin: 1 juin 2017,

...EDFA employs new rad-hard doped microstructured fibre and enabling: >50% electrical power consumption reduction than using conventional EDFAs and small form factor packaging. BEACON integrates an innovative photonic beamformer (BFN) using CMOS compatible silicon photonic fabrication together with Ge diodes. The BFN chip consumes
Voir le projet

 8

 TERMINÉ 

ODISEO 2015

Date du début: 1 juin 2015, Date de fin: 31 mai 2017,

The Local Agency for Employment and Training of the City Council of Getafe in the framework of its activity in support of entry into the Workforce of the disadvantaged and at risk groups, this year has decided to introduce a mobility proposal within the new training program ERASMUS+. The ALEF is proposing through the ODISEO 2015 project to give the possibility to a group of young people from Getaf ...
Voir le projet

 28

 TERMINÉ 

Multi-Gigabit, Scalable & Energy Efficient on-board Digital Processors Employing Multi-core, Vertical, Embedded Opto-electronic Engines (ROBIN)

Date du début: 2 oct. 2013, Date de fin: 2 avr. 2017,

New multi-beam Tera-scale capacity satellites will require a disruptive approach to address digital on-board processors that rely on electronics which consume space, power and cost and reach their capacity saturation. The disruptive solution must combine scalability, technical feasibility, power-efficiency and cost-effectiveness. ROBIN aims to provide this solution realizing multi-gigabit optical ...
Voir le projet

 8

 TERMINÉ 

Development of an innovative manufacturing process for the in-LINE COAting of pultruded composites (COALINE)

Date du début: 1 sept. 2013, Date de fin: 28 févr. 2017,

...n time and the energy employed to produce the composites.• New range of modified resins and gel-coats with MW susceptors to improve radiation absorption and achieve a fast curing process.• An innovative control system to foster the adhesion of the coating to the composite by means of a controlled curing degree in each stage of the process.• The development of innovative fast curing primers to perm ...
Voir le projet

 14

 TERMINÉ 

European Patients' Academy on Therapeutic Innovation (EUPATI)

Date du début: 1 févr. 2012, Date de fin: 31 janv. 2017,

...sations and 16 EFPIA member companies. It features excellence across disease areas in state-of-the art, high quality, objective education to patients about therapeutic innovation. Supported by an innovative e-platform, EUPATI's network of patients, experts, companies and communicators develops recognised blended learning courses for patients to become 'Patient Experts' in treatment development. It ...
Voir le projet

 33

 TERMINÉ 

DIFFERENT (DIgital beam Forming For low-cost multi-static spacE-boRnE syNthetic aperTure radars) (DIFFERENT)

Date du début: 13 déc. 2013, Date de fin: 1 janv. 2017,

DIFFERENT aims at building the foundation of a new generation of space-borne Synthetic Aperture Radars (SAR) with a significant reduction in cost, size, mass and power consumption, and enhanced performances with respect to systems currently available. The final product will be a compact, dual-band, dual-polarization radar with DBF capabilities. DIFFERENT will achieve these results setting up a co ...
Voir le projet

 7

 TERMINÉ 

SmArt water management with Integrated Decision support systems (SAID)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2016,

...the production and deployment of more smart water management systems in Europe.The project will focus in the deployment and evaluation of a complex demonstrator, composed by several heterogeneous and innovative DSSs in the same river basin. This demonstrator, in the south of Spain, represents many similar basins in Europe, and will be based on cutting-edge DSS technologies in four areas: flood con ...
Voir le projet

 11

 TERMINÉ 

Radiation Hard Resistive Random-Access Memory (R2RAM)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2016,

The project aims to realize a strong methodology for the development and design of a radiation hard non-volatile memory technology by using standard CMOS silicon processing. Since standard silicon memories, such as flash memories tend to fail under irradiation, a new approach is envisaged: the development of a specific memory technology, so called resistive random-access memory (RRAM), which is ab ...
Voir le projet

 4

 TERMINÉ 

Biodegradable Magnetic Stent for Coronary Artery Luminal Regeneration (BIOMAGSCAR)

Date du début: 1 janv. 2012, Date de fin: 31 déc. 2016,

...in direct costs, only 10% of the total associated costs.Our consortium includes a vascular disease therapy company, a stent research and manufacturing company, four universities and a specialist in innovative technology investment, all of whom believe our technology will dramatically change this field.
Voir le projet

 8