Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Formaldehyde free Bio-Based thermosetting resin for wood pressed products (ECOPRESSWOOD)

Date du début: 1 mars 2014, Date de fin: 28 févr. 2017,

"Pressed wood panels are composed of chopped or cut wood that are glued together using adhesives. Most of these resins are petroleum based products containing a hazardous chemical: formaldehyde. The acceptable levels of formaldehyde in wood pressed products have been reduced over the past decades due to increased public awareness on its effects on health and the consequent consumer demand for non- ...
Voir le projet

 11

 TERMINÉ 

Innovative Packaging for the Detection of Fresh Meat Quality and Prediction of Shelf-Life (TOXDTECT)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2016,

In the last 10 years, EU beef production has declined nearly 15% due to decreased consumer demand because of animal disease issues. As the concern about food poisoning is growing among consumers and Food Standard and safety agencies, the food industry is called to bring in changes. On the other hand, current consume by and best before dates are confusing for consumers. A recent survey indicates th ...
Voir le projet

 10

 TERMINÉ 

Novel technology to boost the European Bioeconomy: reducing the production costs of PHA biopolymer and expanding its applications as 100% compostable food packaging bioplastic (EUROPHA)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2016,

Bioplastics like PHA are long-term sustainable alternatives because they can show equal performance to conventional petrochemical plastics, originate from renewable non-food resources and are 100% bio-degradable. Although PHA shows better performance than alternative bioplastics (PLA and starch), the market uptake of PHA biosplastics shows the following obstacles: 1) PHA is expensive (>4.5 €/kg), ...
Voir le projet

 9

 TERMINÉ 

Novel PUR foaming manufacturing process with reduced toxic isocyanate content (FREEFOAM)

Date du début: 1 mai 2013, Date de fin: 30 avr. 2016,

Polyurethane (PUR) is one of the most versatile materials ever created, present in the cars, under the carpets, as packaging material, cushioning material in almost all furniture and bedding. The European PUR foam sector has 50.000 companies that employ over 1.6 million people.Polyurethane foam technology consists on foam building by reacting two chemicals, isocyanate and polyol, in the presence o ...
Voir le projet

 9

 TERMINÉ 

Green roofs that clean SME industrial gas containing low and variable concentrations of Volatile Organic Compounds (GRABGAS)

Date du début: 1 mai 2014, Date de fin: 30 avr. 2016,

Cost-effectiveness for controlling emissions of Volatile Organic Compounds (VOC) in industrial waste gas depend on the characteristics of the gas emitted. SMEs affected by VOC emission Directive 99/13/EC (wood, printing, surface cleaning, dry cleaning, leather, vehicle refinishing) generate low and variable concentrations of several different VOCs in small volumes of waste air. This profile of VOC ...
Voir le projet

 8

 TERMINÉ 

A novel technology for producing bio-based synthetic textile fibres from biomass-derived furanic monomers (ECOLASTANE)

Date du début: 1 mars 2013, Date de fin: 29 févr. 2016,

"European Chemicals Industry supplies European Textile & Clothing industry with textile fibres, 75% of which are synthetic (polyester, elastane, nylon). The European Biomass Industry needs to gain market share to the petrochemical industry as supplier of sustainable biomaterials to the Chemicals Industry. More than 99.9% of the world synthetic fibers are made of non-renewable petrochemical resourc ...
Voir le projet

 9

 TERMINÉ 

COoperation and NEtworking between Europe and Latin America and the Caribbean to Coordinate Research Opportunities around ICT and Horizon 2020 challenges via Technology PlAtforms (CONECTA 2020)

Date du début: 1 mars 2014, Date de fin: 29 févr. 2016,

The CONECTA 2020 project embraces the collaboration between Europe and Latin American/Caribbean Countries around Information and Communication Technologies (ICT) and Horizon 2020. CONECTA 2020 proposes to create new mechanisms of collaboration and networking between Latin American Technology Platforms (LATPs) and ETPs in the form of innovative match-making tools around ICT and Future Internet area ...
Voir le projet

 9

 TERMINÉ 

Novel high performance, waterbased “high solids”and bio-based industrial wood coating (NEXT1KOAT)

Date du début: 1 janv. 2013, Date de fin: 31 déc. 2015,

The stringent Solvent Emission Directive (1999/13/EC), fully transposed in 2007, imposes limitations of emissions of volatile organic compounds (VOC) due to the use of organic solvents in paints and varnishes. The most economical way of limiting VOC emission is using water-based coating formulas in which water replaces a substantial amount of the organic solvents traditionally used. Unfortunately, ...
Voir le projet

 15

 TERMINÉ 

Low-cost, Green, Large Scale Manufacturing of new age conducting nanowires displays (NanoDiGree)

Date du début: 1 déc. 2013, Date de fin: 30 nov. 2015,

Currently, display industries, LCD and OLED displays manufacturing is based on Indium-Tin Oxide (ITO) Transparent Conducting Films (TCF). Nevertheless, Indium metal is a very scarce material and its worldwide resources are becoming increasingly limited. Thus, the prices of produced displays based on ITO will inevitably rise day by day if no alternative material is developed to replace it. More ...
Voir le projet

 7

 TERMINÉ 

DEMONSTRATION OF INNOVATIVE FIRE PROTECTION COATINGS FOR STEEL STRUCTURES (STEELPROST)

Date du début: 1 sept. 2013, Date de fin: 30 nov. 2015,

Current methods to provide fire protection of light steel structures lack performance and has resulted in a decrease in structural steel market share. State-of-the-art intumescent coatings (ICs) is not a robust technology due to extensive coating and drying times, and low fire resistance (FR) values. There have not been any innovative solutions to overcome such problems in the last few years, resu ...
Voir le projet

 7

 TERMINÉ 

PYROlysis based process to convert small WWTP sewage sludge into useful bioCHAR (PYROCHAR)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2015,

The PYROCHAR project brings together five SMEs and three research institutions to address the increasingly pressing issue of sewage sludge disposal in Europe. PYROCHAR will provide small municipalities and their waste water treatment plants (WWTPs) with an economically and environmentally sound solution for the treatment and disposal of their sewage sludge.The implementation of European Directives ...
Voir le projet

 8

 TERMINÉ 

Superheated Steam-based process for low energy and high quality drying of food and food residues (STEAMDRY)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2015,

The EU market for processed foods is changing: there is now an increasing demand by consumers for foods that have undergone fewer changes during processing, foods that resemble more to the original raw materials with high nutritive values, flavour and a “natural” image.These pressures are especially significant for a SME dominated sector, the dried foods: although it represents more than €8 billio ...
Voir le projet

 7

 TERMINÉ 

High speed metallic material removal under acceptable surface integrity for rotating frame (HIMMOVAL)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2015,

"The HIMMOVAL project aims to develop a new rapid metal removal concept under acceptable surface integrity for fabricating typical jet engine components made of high resistant super alloys that will be based on smart use of non-conventional machining methods, namely water jet technologies and low plasticity burnishing surface treatment, optimized conventional machining and a well-defined sequence ...
Voir le projet

 4

 TERMINÉ 

Consumer-safe and thermally-stable bioplastic formulation with controlled biodegradation properties for agricultural and horticultural accessories (DEGRICOL)

Date du début: 1 nov. 2012, Date de fin: 31 oct. 2015,

The consumption of plastic materials in agriculture and horticulture in EU has dramatically increased in the last decades posing serious problems of environmental and economic concerns. Agriculture and Horticulture sector generates about 1.2 Mt of plastic waste per year in the Europe, where almost 30% (336 Kt) are coming from accessories such as nets and clips for plant support and plastics pots a ...
Voir le projet

 9

 TERMINÉ 

Early detection and bio-control of mushroom pests and diseases in an Integrated Pest Management approach to comply with the European Directive 2009/128/EU (BIOMUSH)

Date du début: 1 nov. 2012, Date de fin: 31 oct. 2015,

Cultivation of edible mushrooms Agaricus Bisporus in Europe is an economically valuable Industry that employs 50,000 employees with a production 965,000 tonnes and 1,300M Euros sales. Pests and diseases in this industry causes loses of 60M Euros related to Pest control. The main pest insects causing crop losses in Europe are Sciarid flies, whereas the main diseases are the fungus Verticillium, My ...
Voir le projet

 11

 TERMINÉ 

High thermal insulating window frames for energy efficient buildings (THINFRAME)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2015,

The heat loss per area through windows (U-value) is still much greater (around 1.0 W/m2K) than through the building’s walls and roofs. Reduction of window heat loss is essential to reduce the energy use of buildings and their environmental impact as required by the recast Energy Performance of Buildings Directive (EPBD), Directive 2010/31/EU.While substantial effort has been made to improve glazin ...
Voir le projet

 6

 TERMINÉ 

Cost-effective low-friction SEALS by Texturing During Moulding technology (TDM-SEALS)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2015,

As associations of the European plastic and rubber industry, one of our main duties is to monitor potential markets in order to identify novel trends and emerging market niches which can bring growth opportunities to our enterprises, mainly SMEs. In the sector of plastic and rubber seals there is clear and growing demand for higher performance, “zero-leak” seals. A seal is a device that joins mech ...
Voir le projet

 11

 TERMINÉ 

Radiant heating wall-to-wall carpet for energy efficiency space heating of existing non-residential buildings (RADCARPET)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2015,

Energy efficiency is using less energy while maintaining an equivalent service. EU set a target for 2020 of saving 20% of primary energy consumption. Nearly 40% of the energy is consumed by buildings. Large efforts are being invested in future low energy buildings, but the reality is that existing buildings represent 99% of the stock. The EPBD recast sets minimum requirements for existing building ...
Voir le projet

 7

 TERMINÉ 

A novel technology for detecting train wheels surface cracks by non destructive testing based on thermography (TRAINWHEELS)

Date du début: 1 sept. 2013, Date de fin: 31 août 2015,

The European rail network is getting more and more important in the transportation sector: it hosts high speed-trains, higher loads of more passengers or goods, with increased frequency. This determines a higher mechanical load for the moving parts of the carrier involved: therefore, increasing inspection and maintenance are required in order to guarantee safety and well-being of trains. One of th ...
Voir le projet

 5

 TERMINÉ 

Design and develop a new generation of color PVD coatings for decorative applications (NANO4COLOR)

Date du début: 1 mai 2013, Date de fin: 30 avr. 2015,

We all like aesthetical pleasant colors in our every day products: kitchen and bath accessories; domestic appliances; architectural, nautical or automotive fittings; electronics components; jewelry; medical devices. In fact color coatings are present in most everyday products. PVD is one of the most promising coating processes offering brilliant and decorative finishes, superior hardness and wear ...
Voir le projet

 8

 TERMINÉ 

Saponification pre-treatment and biosensors based control system for slaughterhouse waste anaerobic digestion improvement (ADAW)

Date du début: 1 mars 2013, Date de fin: 28 févr. 2015,

Slaughterhouses (mainly for pigs, cattle and poultry which make up almost 93% of the total world meat production) produce large amounts of different wastes and wastewaters. Direct disposal of highly polluted wastewater and organic residues into the sewerage system without prior treatment on the other hand is mostly not acceptable due to resulting environmental and ecological problems and the risk ...
Voir le projet

 8

 TERMINÉ 

Development of a polymer strengthening coating system for glass containers (ONECOAT)

Date du début: 1 janv. 2013, Date de fin: 31 déc. 2014,

Europe is the first producer of glass containers worlwide. However, various threats endanger the sustainability of this key industry: imports from low-cost labour countries outside Europe increased and more than 14,000 employments were lost in the European glass industry during the last 3 years. In addition, glass directly competes with other materials for packaging applications, especially plasti ...
Voir le projet

 8

 TERMINÉ 

Advanced wood plastic composite material for the production of bath furniture resistant to moisture and free of coatings (LIMOWOOD)

Date du début: 1 janv. 2013, Date de fin: 31 déc. 2014,

LIMOWOOD solution will develop a Wood Plastic Composite (WPC) made of a recycled thermoplastic polymer and natural reinforcing particles derived from wood. The resulting material will represent a number of advantages:•Weight and density comparable to current wood-based pannels (700 kg/m3). This will provide reduction in the cost of transport of furniture items and use of cheaper fasteners and fitt ...
Voir le projet

 8

 TERMINÉ 

GREENHOUSE SOLUTION TO AVOID FILM COVER U.V. AND SULPHUR DEGRADATION (GREENAVOID)

Date du début: 1 déc. 2012, Date de fin: 30 nov. 2014,

"Greenhouse cultivation under plastic has allowed converting apparently unproductive lands in modern agriculture exploitations. Different types of plastic materials such as Poly Vinyl Chloride (PVC), Poly Carbonate (PC) and Low Density Polyethylene (LDPE) are commonly used for cladding of greenhouse structures. However, most of plastic polymer films are prone to photo-degradation when exposed to ...
Voir le projet

 8

 TERMINÉ 

Maximisation of greenhouse horticulture production with low quality irrigation waters (CARBGROWTH)

Date du début: 1 déc. 2011, Date de fin: 30 nov. 2014,

Agriculture in the European Union faces some serious challenges in the coming decades:competition for water resources, rising costs, competition for international markets, changes in climate and uncertainties in the effectiveness of current European policies as adaptation strategies. Greenhouse production appears as an alternative to face some of the upcoming challenges. In 2009, the surface dedic ...
Voir le projet

 11

 TERMINÉ 

Development of PCM-based innovative insulating solutions for the Light-weight building sector (STOREPET)

Date du début: 1 nov. 2011, Date de fin: 31 oct. 2014,

New building strategies addressing climate change effects and reduction of heating/cooling energy are two fundamental issues at EU level. Figures as the 35,000 excess deaths attributed to the last heat wave in the continent in 2003, or 10% of the world’s energy being used just for heating of buildings support European citizen’s concerns and new EU legislation. New national and communitarian string ...
Voir le projet

 11

 TERMINÉ 

Genes And Proteins for AutoImmunity Diagnostics (GAPAID)

Date du début: 1 sept. 2012, Date de fin: 31 août 2014,

"Rheumatoid arthritis (RA) and sistemic lupus erythematosus (SLE) are two autoimmune diseases that respectively affect an estimated population of 1.537.000 and 1.272.000 of patients in Europe. Such diseases show a long prodrome during which there are no clinical symptoms. In some cases, therapeutic treatments have been developed to improve patients quality of life. Therefore, reliable diagnostic/p ...
Voir le projet

 10

 TERMINÉ 

All Glass Mid Temperature Direct Flow Thermal Solar Vacuum Tube (SOLEGLASS)

Date du début: 1 sept. 2011, Date de fin: 31 août 2014,

The strategic overall objective of this project is to produce the highly innovative product in the Solar Thermal market segment, the All Glass Mid Temperature Direct Flow Thermal Solar Vacuum Tube (SOLEGLASS in the future text). That will be achieved by combining the latest cutting edge technology developments in Solar Thermal and Glass industries and the comprehensive and focused research activit ...
Voir le projet

 12

 TERMINÉ 

Development of a new functional antimicrobial edible film for fresh meat products (Meatcoat)

Date du début: 1 déc. 2011, Date de fin: 31 mai 2014,

The main scope of the MEATCOAT is the development of a new functional antimicrobial edible coating for meat packaging to improve the integrity of products during distribution and commercialisation. The proposed system will increase shelf-life of the product due to their antimicrobial characteristics. The present proposal aims help end-user communities of SMEs: the fresh food industry (and particul ...
Voir le projet

 11

 TERMINÉ 

"BIOactive highly porous and injectable Scaffolds controlling stem cell recruitment, proliferation and differentiation and enabling angiogenesis for Cardiovascular ENgineered Tissues" (BIOSCENT)

Date du début: 1 janv. 2009, Date de fin: 31 déc. 2013,

"Congenital and acquired diseases of the heart are the leading causes of morbidity and mortality in the world today; 7.2 million people die each year due to coronary heart disease, being the first cause of mortality in population above 60 years old, and the second cause after HIV in world wide young population. There is an urgent demand for new methods to repair and replace damaged cardiovascular ...
Voir le projet

 19

 TERMINÉ 

Hybrid Algae Cultivation System Based on Conditioned Environment with Efficient Light Collection and Distribution System (SOLALGEN)

Date du début: 1 déc. 2011, Date de fin: 31 déc. 2013,

"The strategic overall objective of the proposed project is to develop an optical light distribution system that will significantly increase the productivity of existing open pond algae cultivation plant designs while maintaining low capital and operating costs and consequently reducing the overall costs per unit mass of algae oil produced.Light intensity is a key parameter affecting algae growth. ...
Voir le projet

 8

 TERMINÉ 

Demonstration action for an Easy POSitioning for patients with reduced mobility (Eposbed-Demo)

Date du début: 1 sept. 2011, Date de fin: 30 nov. 2013,

The Eposbed Demo project aims to bring into the market a Specialty or Medical Bed for hospitals that assist patients with limited mobility in bed. Eposbed lab-scale prototype has been successfully developed in the FP7-SME-2007-1, Eposbed project nº 222064, although we only could perform those tasks devoted to its research development. In Eposbed Demo we aim to use the advanced knowledge, complemen ...
Voir le projet

 4

 TERMINÉ 

Integrated and Cost-Effective Solution to reduce the volume of Pig Slurry, minimize Pollutant Emissions and Process Energy Consumption (EfficientHeat)

Date du début: 1 oct. 2011, Date de fin: 30 sept. 2013,

The increase of EU pig production and the intensification of its practice resulted of an increase of pigwaste production. In 2008, more than 930 million m3 of pig slurry was produced in the EU. Pigs areraised indoor and the manure collected is mostly slurry. Pig farmers need to treat a great volume ofresidue with high viscosity and variable physico-chemical composition. The leaks and air emissions ...
Voir le projet

 6

 TERMINÉ 

A novel technology for sewerage mapping, inspection and cleaning with integrated real-time self-audit capability (PipeGuard)

Date du début: 1 sept. 2011, Date de fin: 31 août 2013,

Sewage systems are crucial to reduce the risks of water borne diseases and avoid flooding of cities. Cleaning processes are thus highly important to avoid health risks and environmental, economic and societal impacts which can be caused by damaged or blocked sewerage. European sewage networks are operated by over 20,000 municipalities and public entities which spend over €6.5 billion annually to c ...
Voir le projet

 7

 TERMINÉ 

Development of an efficient heating and cooling technology system for rotational moulding, which will –dramatically reduce cycle time, product cost and energy consumption (ROTOFAST)

Date du début: 1 août 2010, Date de fin: 31 juil. 2013,

Rotational Molding is a very competitive manufacturing method for producing large hollow plastic products. It provides one advantage over other plastic processing technologies: production of seamless articles, with uniform wall thickness and complex shapes for sectors as chemical storage, toys, construction and transports. However this technology has stuck without major innovative improvements in ...
Voir le projet

 13

 TERMINÉ 

"Developing European standards for bee pollen and royal jelly: quality, safety and authenticity" (APIFRESH)

Date du début: 1 juil. 2010, Date de fin: 30 juin 2013,

"The competitiveness of the European beekeeping sector is progressively falling due to the reduction of beekeepers’ production as a direct consequence of decrease in bee population, implying lower economies of scale, underutilised resources and higher relative production costs. In addition, beekeeping products produced in countries with much lower quality standards, even sometimes adulterated with ...
Voir le projet

 11

 TERMINÉ 

"Development of a wearable, functional, regulation-compliant Water-borne Wood Coating" (ECOVARN)

Date du début: 1 mai 2010, Date de fin: 30 avr. 2013,

"The aim of this project is to develop a new wearable, functional, regulation-compliant Water-borne Wood coating in order to help two large European sectors, wood coatings and wood furniture to reverse the present declining competitiveness trend. This water-borne technology will provide a new wood coating with moderate and high functional requirements such as abrasion/scratching resistant or dirt ...
Voir le projet

 11

 TERMINÉ 

New concept and technology for high energy rock fall protection fences (ABSORBNET)

Date du début: 1 janv. 2011, Date de fin: 31 déc. 2012,

"The ETAG27 has been endorsed in January 2008 by EOTA. This document defines the technical performances a rock fall protection kit has to meet to get (CE) marking on the product. The rock fall protection market is growing rapidly (+17% p.a.) due to the new consciousness of safety, not only for existing infrastructures, but also for future ones for whom safety is considered at conception stage.ETAG ...
Voir le projet

 7

 TERMINÉ 

A Novel Filtration Technology Targeted at Enhancing the European Healthcare System´s Efforts in Restraining the Spread of the Hospital Infection (HAIFREE)

Date du début: 1 janv. 2011, Date de fin: 31 déc. 2012,

"At healthcare facilities, there is a strong demand for a new advanced air cleaning technology to prevent infectious diseases such as severe acute respiratory syndrome (SARS) and Hospital Acquired Infections (HAI). The system would avoid the high costs related to healthcare and legal matters which increase every year and are a burden to the fixed costs of maintaining sanitary systems in Europe and ...
Voir le projet

 8

 TERMINÉ 

Lightweight, long endurance body cooling for fire fighters (StayCool)

Date du début: 1 janv. 2011, Date de fin: 31 déc. 2012,

There are about 500 000 professional fire fighters in the European Union (EU). When called to fight fires they can be exposed to high levels of heat stress, which results in decreased physical performance and even heat exhaustion. If a fire fighter succumbs to heat exhaustion he requires rescuing and this then exposes other fire fighters and the public to increased risk. In order to reduce the ris ...
Voir le projet

 7