Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 EN COURS 
mySMARTLife project aims at the development of an Urban Transformation Strategy to support cities in the definition of transition models, as a suitable path to reach high level of excellence in its development process, addressing the main city challenges and progressing to the smart people and smart economy concepts.The main instrument to achieve this very ambitious strategy will be the definition ...
Voir le projet

 28

 EN COURS 

Photonic Integrated Circuits Assembly and Packaging Pilot Line (PIXAPP)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

PIXAPP will establish the world’s first open access Photonic Integrated Circuit (PIC) assembly & packaging Pilot Line. It combines a highly-interdisciplinary team of Europe’s leading industrial & research organisations. PIXAPP provides Europe’s SMEs with a unique one-stop-shop, enabling them to exploit the breakthrough advantages of PIC technologies. PIXAPP bridges the ‘valley of death’, providing ...
Voir le projet

 20

 EN COURS 
In the GRIDABLE project we will introduce novel thermoplastic polymer composite materials to enhance performance of essential components of smart grid infrastructure. We have proven in laboratory scale that the polypropylene-silica nanocomposite brings considerable improvements especially in dielectric breakdown strength.When applied as insulator in high-voltage direct current (HVDC) cable and in ...
Voir le projet

 9

 EN COURS 
Europe's position in the production of biochemicals from biomass and by-products is limited to a few compounds, while their demand is among the largest in the world. However, Europe has a lot of world leader chemical companies. On the other hand, lignocellulosic waste constitutes one of the most abundant resources without competing with food chain.REHAP’s 16 partners aim at revalorizing agricultur ...
Voir le projet

 16

 EN COURS 

DEMOnstration of large SOFC system fed with biogas from WWTP (DEMOSOFC)

Date du début: 1 sept. 2015, Date de fin: 31 août 2020,

Energy Context and EU positionThe “Europe 2020” strategy promotes the shift towards a resource-efficient, low-carbon economy to achieve sustainable growth. The European policies on energy and sustainability are thus contributing to the diversification of the primary energy mix and to the introduction of distributed power technologies with high efficiency and low carbon emissions. , From the point ...
Voir le projet

 6

 EN COURS 
Renewable energy sources are key enablers to decrease greenhouse gas emissions and to cope with the anthropogenic global warming. The intermittent behaviour of them and their limited storage capabilities present new challenges to power system operators in maintaining power quality and reliability. However, the increased availability of advanced automation and communication technologies has also pr ...
Voir le projet

 19

 EN COURS 

STORY- Added value of STORage in distribution sYstems (STORY)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2020,

The main objective of STORY is to show the added value storage can bring for a flexible, secure and sustainable energy system. This will be achieved by showing the inter-relations between technologies and stakeholders as well as the potential and impact of policy and regulation.The future European grid has to serve a diverse and mixed landscape of users in a situation of mixed rules and responsibi ...
Voir le projet

 18

 EN COURS 
The objective of the SPOTVIEW project is to develop and demonstrate innovative, sustainable and efficient processes and technology components, in order to optimize the use of natural resources, especially water, in three industrial sectors (Dairy, Pulp and Paper and Steel) contributing to 44% of industrial water usage in EU. This resource optimization (including water, energy, raw materials and ad ...
Voir le projet

 15

 EN COURS 

Coordinating Optimisation of Complex Industrial Processes. (COCOP)

Date du début: 1 oct. 2016, Date de fin: 31 mars 2020,

The vision of COCOP is that complex process-industry plants are optimally run by operators with the guidance of a coordinating, real-time optimisation system. COCOP will strengthen the global position of the European process industry, which represents 20 per cent of the European manufacturing base with around 450,000 companies generating €1.6 billion in turnover and 6.8 million jobs.The project’s ...
Voir le projet

 12

 EN COURS 
MycoKey aims to generate innovative and integrated solutions that will support stakeholders in effective and sustainable mycotoxin management along food and feed chains. The project will contribute to reduce mycotoxin contamination mainly in Europe and China, where frequent and severe mycotoxin contaminations occur in crops, and where international trade of commodities and contaminated batches are ...
Voir le projet

 32

 EN COURS 

Collaborative European NeuroTrauma Effectiveness Research in TBI (CENTER-TBI)

Date du début: 1 oct. 2013, Date de fin: 31 mars 2020,

Traumatic Brain Injury (TBI) is a major cause of death and disability, leading to great personal suffering to victim and relatives, as well as huge direct and indirect costs to society. Strong ethical, medical, social and health economic reasons therefore exist for improving treatment. The CENTER-TBI project will collect a prospective, contemporary, highly granular, observational dataset of 5400 p ...
Voir le projet

 44

 EN COURS 

Evidence-based ICT tools for weight loss maintenance (NoHoW)

Date du début: 1 mars 2015, Date de fin: 29 févr. 2020,

Most adults who try to lose weight fail to maintain it. Obesity is a key economic and healthcare challenge for Europe. Effective interventions and commercial programmes for weight loss are widely available, but most people re-gain their lost weight. Currently few comprehensive solutions exist to help Europeans manage weight loss maintenance (WLM).Current research suggests the most promising eviden ...
Voir le projet

 16

 EN COURS 

MultiModal Mall Entertainment Robot (MuMMER)

Date du début: 1 mars 2016, Date de fin: 29 févr. 2020,

"In MuMMER ("MultiModal Mall Entertainment Robot"), we propose to address the important and growing market of consumer entertainment robotics by advancing the technologies needed to support this area of robotics, and also by explicitly addressing issues of consumer acceptance, thus creating new European business and employment opportunities in consumer robotics. Specifically, we will develop a hum ...
Voir le projet

 7

 EN COURS 

Meaningful Integration of Data, Analytics and Services (MIDAS)

Date du début: 1 nov. 2016, Date de fin: 29 févr. 2020,

The MIDAS consortium is a partnership involving health authorities in five EU countries and the U.S. and technical big data experts from research institutions, MNCs and SMEs. Managing big data for ‘health in all’ is a monumental challenge for policy makers. MIDAS is addressing this challenge by developing and delivering an integrated solution which will liberate knowledge from data silos and unify ...
Voir le projet

 17

 EN COURS 

Metal Recovery from Low Grade Ores and Wastes Plus (METGROW PLUS)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2020,

METGROW+ will address and solve bottlenecks in the European raw materials supply by developing innovative metallurgical technologies for unlocking the use of potential domestic raw materials. The METGROW+ consortium has received an EIP RM Commitment status. The consortium is supported by internationally respected research institutes and universities. Many of the partners (9) are members of EIT KIC ...
Voir le projet

 20

 TERMINÉ 
According to European Commission, 13.1 million tons of poultry meat was produced only in the European Union (EU-28) in 2014 with an estimated generation of 3.1 million tons feather waste. At present the majority of poultry feathers are converted into low nutritional value animal food or disposed in landfills, causing environmental and health hazards. In this context, the overall objective of KaRMA ...
Voir le projet

 19

 TERMINÉ 
The InSCOPE project will set-up an open access pilot line service for Hybrid TOLAE (H-TOLAE) technologies capable of sampling products at TRL6-7. It positions itself in between R&D and industry and deploys a service for validating potential H-TOLAE products. Manufacturing progresses beyond R&D level (TRL5 towards 6) by improving processes, functionality and reliability allowing sampling at high qu ...
Voir le projet

 14

 TERMINÉ 
The INSIGHT project aims at developing a Monitoring, Diagnostic and Lifetime Tool (MDLT) for Solid Oxide Fuel Cell (SOFC) stacks and the hardware necessary for its implementation into a real SOFC system. The effectiveness of the MDLT will be demonstrated through on-field tests on a real micro-Combined Heat and Power system (2.5 kW), thus moving these tools from Technology Readiness Level (TRL) 3 t ...
Voir le projet

 11

 TERMINÉ 

Renewable residential heating with fast pyrolysis bio-oil (Residue2Heat)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

The overall objective of Residue2Heat is to enable the utilization of sustainable, ash rich biomass and residues in residential heating applications (20-200 kWth) to provide sustainable heat at a competitive price. In this concept, various 2nd generation agricultural, and forestry residue streams are converted into a liquid energy carrier near the biomass origin at an economic viable scale of 15-3 ...
Voir le projet

 9

 TERMINÉ 

Data-Driven Bioeconomy (DataBio)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

The data intensive target sector selected for the DataBio project is the Data-Driven Bioeconomy, focusing in production of best possible raw materials from agriculture, forestry and fishery/aquaculture for the bioeconomy industry to produce food, energy and biomaterials taking into account also various responsibility and sustainability issues. DataBio proposes to deploy a state of the art, big dat ...
Voir le projet

 49

 TERMINÉ 

AUTOmated driving Progressed by Internet Of Things (AUTOPILOT)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

"Automated driving is expected to increase safety, provide more comfort and create many new business opportunities for mobility services. The market size is expected to grow gradually reaching 50% of the market in 2035. The IoT is about enabling connections between objects or "things"; it’s about connecting anything, anytime, anyplace, using any service over any network. There is little doubt that ...
Voir le projet

 43

 TERMINÉ 
An inspiration for INVADE are the world-wide agreements on minimisation of human caused effects to climate change and energy efficiency targets set at the European Union with ambitious goals for reduction of greenhouse gas emission and for increase of renewable energy share. To enable a higher share of renewable energy sources to the smart grid and gain a traction in the market place a few critica ...
Voir le projet

 12

 TERMINÉ 
The main goal of the BALANCE proposal is to gather leading research centres in Europe in the domain of Solid Oxide Electrolysis (SOE) and Solid Oxide Fuel Cells (SOFC) to collaborate and accelerate the development of European Reversible Solid Oxide Cell (ReSOC) technology. ReSOC is an electrochemical device that converts electrical energy into hydrogen (electrolysis mode) or alternatively fuel gas ...
Voir le projet

 10

 TERMINÉ 
Effective EU support to a large external crisis requires new approaches. In response to this challenge and to identified user and market needs from previous projects, Reaching Out proposes an innovative multi-disciplinary approach that will optimize the efforts, address a wide spectrum of users and maximize market innovation success.This approach results in five main objectives: to1. Develop a Col ...
Voir le projet

 29

 TERMINÉ 

Energy CHOices supporting the Energy union and the Set-plan (ECHOES)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,

ECHOES is a multi-disciplinary research project providing policy makers with comprehensive information, data, and policy-ready recommendations about the successful implementation of the Energy Union and SET plan. Individual and collective energy choices and social acceptance of energy transitions are analysed in a multi-disciplinary process including key stakeholders as co-constructors of the know ...
Voir le projet

 15

 TERMINÉ 
Medium- to large-scale bioenergy utilisation for electricity and combined industrial or district heating is predicted to increase by 160% in 2020 compared to 2010, while carbon emission quotas are becoming stricter. Finding new ways to efficiently utilise cheap and currently unused feedstocks are necessary in order to meet these challenges.Within the project Biofficiency we will investigate how to ...
Voir le projet

 11

 TERMINÉ 

SKin Healthcare by Innovative NanoCAPsuleS (SKHINCAPS)

Date du début: 1 oct. 2015, Date de fin: 30 sept. 2019,

SKHINCAPS project will explore an innovative and sustainable in situ self-assembly nanoencapsulation technology to deliver novel products for skin healthcare applications, with increased efficiency and cost benefits, leading to ground-breaking innovations on the actual products.Using this safe, sustainable and easily scalable technology, different actives will be addressed for nanoencapsulation: p ...
Voir le projet

 10

 TERMINÉ 
The Transportation sector employs over 10 million persons in the EU today. At the same time, Transport is a social sector that is rapidly developing, changing and being influenced to the maximum extent by the development of automation, electrification and greening of transport, among others, thus facing problems in staffing its several domains with appropriate and qualified personnel. This fact, m ...
Voir le projet

 21

 TERMINÉ 

Collaborative cApacity Programme on Its Training-educAtion and Liaison (CAPITAL)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

The aim of the project is to build a collaborative capacity community and deployment programme to support public and private stakeholders in the implementation of ITS (C-ITS) with training and educational resources which enable knowledge transfer about the benefits and deployment of ITS. The project will assist public and private stakeholders in developing their knowledge, skills, and abilities to ...
Voir le projet

 11

 TERMINÉ 
Smart factories are characterized by increasing automation and increasing customization. In these dynamic environments flexible and adaptive work organization is crucial both for productivity and work satisfaction. Factory2Fit project will support this development by developing adaptation solutions with which people with different skills, capabilities and preferences can be engaged, motivated and ...
Voir le projet

 9

 TERMINÉ 
The overall aim of the SOTERIA project is to improve the understanding of the ageing phenomena occurring in reactor pressure vessel (RPV) steels and in the internal steels (internals) in order to provide crucial information to regulators and operators to ensure safe long-term operation (LTO) of existing European nuclear power plants (NPPs). SOTERIA has set up a collaborative research consortium wh ...
Voir le projet

 25

 TERMINÉ 

Industrial scenarios for connected factories (ConnectedFactories)

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

There is a consensus among industry and policymakers that Europe is currently in the middle of an industrial revolution initiated by the digitisation of industrial processes. Cyber Physical Systems (CPS), the Industrial Internet and the Internet of Things (IoT) connect people, devices, machines and enterprises like never before. For many years companies and research organisations have been address ...
Voir le projet

 16

 TERMINÉ 
The main objective of this Project is the development of a methodology and ICT tools which will allow an advanced simulation of intermodal railway logistics platforms models in order to support tasks related to both design and planning phases.Using the combination of demand/economic/capacity models as main inputs, an evaluation of scenarios will be possible by means of the comparison of an underly ...
Voir le projet

 14

 TERMINÉ 

All-Phononic circuits Enabled by Opto-mechanics (PHENOMEN)

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

This project is at the intersection of photonics, RF signal processing and phononics, aiming to achieve an all-optical phononic circuit using coherent phonons as the state variable. The concept is based on cavity optomechanics (OM) to develop GHz- frequency in-chip phononic circuits for room temperature operation. The circuits will integrate OM-pumped phonon sources and detectors as well as phonon ...
Voir le projet

 7

 TERMINÉ 

NeoCel – Novel processes for sustainable cellulose-based materials (NeoCel)

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

The main objective of NeoCel project is to develop innovative and techno-economically feasible alkaline processes enabling the sustainable production of higher quality eco-innovative textile fibres from reactive high-cellulose pulps and integration of these processes with pulp mills.Targets for the development of NeoCel processes are: - wet strength of fibres higher than the wet strength of standa ...
Voir le projet

 13

 TERMINÉ 
Currently there is no truly sustainable pathway for the production of plastics, an industry which in the EU employs 1.45M people, has a turnover of €89B but consumes ~778GWh of energy per annum. This is an opportunity for industry with pressure increasing to develop low energy, high-quality, wet-processing techniques for consumer products. Here Nature may provide us with inspiration, as over hundr ...
Voir le projet

 8

 TERMINÉ 

New generation of Intelligent Efficient District Cooling systems (INDIGO)

Date du début: 1 mars 2016, Date de fin: 31 août 2019,

In Europe, different prognosis show an increase in cooling demand of almost 60% in 2030 with respect to nowadays. District cooling (DC) can play a part in satisfying this demand in a sustainable way (since can offer 5 to 10 times higher efficiency solutions than on‐site stand‐alone distributed systems). Even if DC captures only minor portion of the prospective market, this will translate into a dr ...
Voir le projet

 6

 TERMINÉ 

Transforming Transport (TT)

Date du début: 1 janv. 2017, Date de fin: 30 juin 2019,

Big Data will have a profound economic and societal impact in the mobility and logistics sector, which is one of the most-used industries in the world contributing to approximately 15% of GDP. Big Data is expected to lead to 500 billion USD in value worldwide in the form of time and fuel savings, and savings of 380 megatons CO2 in mobility and logistics. With freight transport activities projected ...
Voir le projet

 48

 TERMINÉ 
US4GREENCHEM aims to design a biorefinery concept for the complete valorization of lignocellulosic biomass that is energy- and cost- efficient and based solely on green technologies. The concept combines mechanical pretreatment of the substrate with the aid of ultrasound to overcome its recalcitrance and disrupt inhibitors with mild CO2 hemicellulose degradation and with the enzymatic recovery of ...
Voir le projet

 10

 TERMINÉ 
The stabilization of molten corium is recognised as essential if a safe and stable state is to be reached following a severe accident. Among the possible options, In-Vessel Melt Retention (IVMR) appears as an attractive solution that would minimize the risks of containment failure (less Hydrogen produced, no corium-concrete interaction), if it can be proved to be feasible.The strategy is already a ...
Voir le projet

 25