Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

ERA-Net on INtesTInal MICrobiomics, diet and health, implementing JPI HDHL objectives (HDHL-INTIMIC)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2021,

"HDHL-INTIMIC (INtesTInal MICrobiomics) is a proposal for an ERA-NET Cofund in the field of food, nutrition and health to support the Joint Programming Initiative "A Healthy Diet for a Healthy Life" (JPI HDHL).There is a high burden of non-communicable diseases due to unhealthy diet and lifestyle patterns. The intestine and in particular the intestinal microbiota have an influence on metabolic pr ...
Voir le projet

 14

 TERMINÉ 

RADiation and reliability challenges for electronics used in Space, Avionics, on the Ground and at Accelerators (RADSAGA)

Date du début: 1 mars 2017, Date de fin: 28 févr. 2021,

Reliability and radiation damage issues have a long and important history in the domain of satellites and space missions. Qualification standards were established and expertise was built up in space agencies (ESA), supporting institutes and organizations (CNES, DLR, etc.) as well as universities and specialized companies. During recent years, radiation concerns are gaining attention also in aviati ...
Voir le projet

 9

 TERMINÉ 

The European network for observing our changing planet (ERA-PLANET)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2021,

In the last decade a significant number of projects and programmes in different domains of environmental monitoring and Earth observation have generated a substantial amount of data and knowledge on different aspects related to environmental quality and sustainability. Big data generated by in-situ or satellite platforms are being collected and archived with a plethora of systems and instruments m ...
Voir le projet

 38

 TERMINÉ 

Plasma Antenna Technologies (PATH)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

PATH is intended to promote a collaborative researches focused in the development of high density plasma sources implemented with the Exchange of staff personnel between the partners of the network. The research will also address transfer of knowledge and training of the researchers in the specific field of plasma sources and its applications in the telecommunication sector.High density plasma sou ...
Voir le projet

 7

 TERMINÉ 

Advanced Radio Astronomy in Europe (RadioNet)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

RadioNet is a consortium of 28 institutions in Europe, Republic of Korea and South Africa, integrating at European level world-class infrastructures for research in radio astronomy. These include radio telescopes, telescope arrays, data archives and the globally operating European Network for Very Long Baseline Interferometry (EVN). RadioNet is de facto widely regarded to represent the interests o ...
Voir le projet

 29

 TERMINÉ 

Laser Lightning Rod (LLR)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

Controlling lightning is a long time dream of mankind. The goal of the present project is to investigate and develop a new type of lightning protection based on the use of upward lightning discharges initiated through a high repetition rate multi terawatt laser. The feasibility of the novel technique and the project’s prospect of success are based on recent research providing new insights into the ...
Voir le projet

 9

 TERMINÉ 

Multi object spectrometer with an array of superconducting integrated circuits (MOSAIC)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2020,

Recent sub-millimeter instruments on the Herschel Space Observatory, operational from 2009-2013, have discovered thousands of sub-millimeter galaxies, whose combined emission forms the cosmic infrared background. A major challenge is to measure their distance, or age, by determining their redshifts, which also has to be based on the sub-millimeter signals (because they do not have an optical count ...
Voir le projet

 1

 TERMINÉ 

High Efficiency Multistage Plasma Thruster – Next Generation (HEMPT-NG)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

...ent basis for economic competitiveness.The HEMPT-NG consortium is led by TES (Thales Electronic System GmbH), subsidiary of the Thales Group, worldwide leader in the development and production of space products, responsible for thruster equipment and integrated EPS. European industrial partners are: Thales, OHB, Airbus and Aerospazio, who bring their expertise in spacecraft mission studies, equipm ...
Voir le projet

 10

 TERMINÉ 

Radio Technologies for Broadband Connectivity in a Rapidly Evolving Space Ecosystem: Innovating Agility, Throughput, Power, Size and Cost (REVOLVE)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

Radio signals are core to space systems and services; they are the backbone of satellite broadcasting & communications and further represent the primary underpinning technology of the nearly ubiquitous space-based radio navigation services as well as a large number of Earth observation instruments. Radio technologies are therefore central in defining the investment return for a wide range of missi ...
Voir le projet

 5

 TERMINÉ 

Lubricant impregnated slippery surfaces (LubISS)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

LubISS, Lubricant Impregnated Slippery Surfaces, is the first European Training Network with the main objectives of designing, characterizing, and modelling low adhesive easy-to-clean surfaces for anti-icing and anti-fouling. In a coordinated effort among 9 world-class academic institutions and industrial partners from 6 European countries (Finland, France, Germany, Great Britain, Netherlands, Swi ...
Voir le projet

 9

 TERMINÉ 

Gridded Ion Engine Standardised Electric Propulsion Platforms (GIESEPP)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

...tive activity to develop, build and test to TRL5 the first European Plug and Play Gridded Ion Engine Standardised Electric Propulsion Platform (GIESEPP) to operate Airbus Safran Launchers and QinetiQ Space ion engines. These are the only European ion engines in the 200-700W (LEO) and 5kW (GEO) domains that are space-proven, and the consortium’s intention will be to improve European competitiveness ...
Voir le projet

 8

 TERMINÉ 

Production of Scandium compounds and Scandium Aluminum alloys from European metallurgical by- products (SCALE)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2020,

... technological applications are unique, as it is a key component in producing Solid Oxide Fuel Cells (Scandia-Stabilized-Zirconia solid electrolyte layer) or high strength Aluminum alloys used in aerospace and 3D printing applications (SCALMALLOY®). Yet Scandium supply is limited due to its scarcity and the high cost of its production, which currently takes place in Asia and Russia. Europe has no ...
Voir le projet

 20

 TERMINÉ 

Do intermediate-mass black holes exist? (imbh)

Date du début: 1 sept. 2015, Date de fin: 31 août 2020,

With this proposed project I will determine whether intermediate-mass black holes (IMBHs) exist. I propose to use ESA's new Gaia mission, the rich Hubble Space Telescope data archive, and state-of-the-art techniques to investigate systems predicted to exist but not yet found hitherto, such as recoiled hyper-compact stellar systems, red-supergiant mass donors to ultra-luminous X-ray sources, and wh ...
Voir le projet

 1

 TERMINÉ 

Building the next generation high-speed data converters to strengthen European excellence and competitiveness on space applications and beyond (INTERSTELLAR)

Date du début: 1 déc. 2016, Date de fin: 31 août 2020,

...uropean non-dependence under the line “High speed DAC-ADC based on European Technology” – analogue-to-digital and digital-to-analogue data converters. E2V designs, manufactures, supplies to the space market these essential components, but faces keen competition from US providers. To preserve know-how and production of such competitive components in Europe and to underscore its efforts for non-depe ...
Voir le projet

 4

 TERMINÉ 

NEXT GENERATION CERAMIC COMPOSITES FOR COMBUSTION HARSH ENVIRONMENTS AND SPACE (C3HARME)

Date du début: 1 juin 2016, Date de fin: 31 mai 2020,

There is an increasing demand for advanced materials with temperature capability in highly corrosive environments for aerospace. Rocket nozzles of solid/hybrid rocket motors must survive harsh thermochemical and mechanical environments produced by high performance solid propellants (2700-3500°C). Thermal protection systems (TPS) for space vehicles flying at Mach 7 must withstand projected service ...
Voir le projet

 12

 TERMINÉ 

Next Generation GEOSS for Innovation Business (NextGEOSS)

Date du début: 1 déc. 2016, Date de fin: 31 mai 2020,

The NextGEOSS project will implement a federated data hub for access and exploitation of Earth Observation data, including user-friendly tools for data mining, discovery, access and exploitation. This data hub will be supported by a strong commitment to the engagement of Earth Observation and related communities, with the view of supporting the creation of innovative and business oriented applicat ...
Voir le projet

 27

 TERMINÉ 

Consortium for Hall Effect Orbital Propulsion System (CHEOPS)

Date du début: 1 nov. 2016, Date de fin: 30 avr. 2020,

CHEOPS proposes to develop three different Hall Effect Thruster electric propulsion systems: a dual mode EPS for GEO applications, a low power for LEO applications and a >20 kW high thrust EPS for exploration applications. Each of these will be developed according to market needs and drivers applying incremental technology changes to existing EPS products. The development approach will follow the ...
Voir le projet

 14

 TERMINÉ 

Shared Cities: Creative Momentum

Date du début: 1 juin 2016, Date de fin: 28 févr. 2020,

Shared Cities: Creative Momentum is a Central European consortium of cultural actors whose interest intersects in sharing, circulating, and exchanging the best practices in self-initiated, participatory and transdisciplinary architecture and urbanism collaborations.Over the course of four years, the platform of eleven partners from six countries, active in architecture, urban design, art and cultu ...
Voir le projet

 11

 TERMINÉ 

Cross-layer modEl-based fRamework for multi-oBjective dEsign of Reconfigurable systems in unceRtain hybRid envirOnments (CERBERO)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

ICT is embedded and pervasive into our daily lives. The notion of Cyber Physical Systems (CPS) has emerged: embedded computational collaborating devices, capable of controlling physical elements and responding to humans.The Cross-layer modEl-based fRamework for multi-oBjective dEsign of Reconfigurable systems in unceRtain hybRid envirOnments (CERBERO) project aims at developing a design environmen ...
Voir le projet

 12

 TERMINÉ 

Deep sub-micron microprocessor for spAce rad-Hard appLIcation Asic (DAHLIA)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

...an 28nm FDSOI technology with multi-core ARM processors for real-time applications, eFPGA for flexibility and key European IPs, enabling faster and cost-efficient development of products for multiple space application domains. The performance is expected to be 20 to 40 times the performance of the existing SoC for space and more than 2 times the performance of the future quad core LEON4 chip. This ...
Voir le projet

 7

 TERMINÉ 

MagnetIc NOzzle thruster with elecTron cyclOtron Resonance (MINOTOR)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

...t a factor of 2 is expected, and reliability compared to mature technologies. It is also scalable and can potentially be considered for all electric propulsion applications, from microsatellites to space tugs. Although the first results obtained with ECRA have been encouraging, the complexity of the physics at play has been an obstacle for the understanding and development of the technology. Thus ...
Voir le projet

 7

 TERMINÉ 

Energy for Smart Objects (EnSO)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

The goal of EnSO is to develop and consolidate a unique European ecosystem in the field of autonomous micro energy sources (AMES) supporting Electronic European industry to develop innovative products, in particular in IoT markets. In summary, EnSO multi-KET objectives are:• Objective 1: demonstrate the competitiveness of EnSO energy solutions of the targeted Smart Society, Smart Health, and Smart ...
Voir le projet

 36

 TERMINÉ 

Detection and Integrated Assessment of Non-authorised water Abstractions using EO (DIANA)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

DIANA is aimed at co-designing and openly demonstrating a commercial service platform that will empower water managers and authorities to optimise the identification and inspection of non-authorised water abstractions for irrigation as well as improve their water management policies and practices, especially in extreme conditions such as drought. DIANA will leverage EO data provided by Copernicus ...
Voir le projet

 9

 TERMINÉ 

demonstRation of EU effective lArge sCale tHreat and crIsis maNaGement OUTside the EU (Reaching out)

Date du début: 1 oct. 2016, Date de fin: 30 nov. 2019,

Effective EU support to a large external crisis requires new approaches. In response to this challenge and to identified user and market needs from previous projects, Reaching Out proposes an innovative multi-disciplinary approach that will optimize the efforts, address a wide spectrum of users and maximize market innovation success.This approach results in five main objectives: to1. Develop a Col ...
Voir le projet

 29

 TERMINÉ 

Continuous Observation of Embedded Multicore Systems (COEMS)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,

The ability to observe the internals of an execution of a computer-based system is a fundamental requirement for ultimately ensuring correctness and safe behaviour. Within COEMS (Continuous Observation of Embedded Multicore Systems) a novel observer platform with supporting verification methods for software systems is created. COEMS tackles the issues of detection and identification of non-determi ...
Voir le projet

 6

 TERMINÉ 

HUman MANufacturing (HUMAN)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

...ysical, conceptual, methodological, technological, and knowledge-based tools. 3 use case companies from the Furniture Manufacturing (ROYO Group), Automation Manufacturing (COMAU), & Defence & Aerospace (AIRBUS) sectors are involved. Proposed advances offered by HUMAN solutions will remove the barriers for:adaptability and flexibility of humans to continuously changing workplaces;alignment of new a ...
Voir le projet

 12

 TERMINÉ 

Empowered decision-making in simulation-based engineering: Advanced Model Reduction for real-time, inverse and optimization in industrial problems (AdMoRe)

Date du début: 1 oct. 2015, Date de fin: 30 sept. 2019,

“AdMoRe: Empowered decision-making in simulation-based engineering: Advanced Model Reduction for real-time, inverse and optimization in industrial problems” aims at providing in-depth training of Early Stage Researches (ESRs) in the development and application of state-of-the-art computational models and numerical methods to solve cutting-edge engineering problems. The main driving factors of all ...
Voir le projet

 7

 TERMINÉ 

Increased Safety and robust certification for ditching of aircrafts and helicopters (SARAH)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

SARAH is concerned with establishing novel holistic, simulation-based approaches to the analysis of aircraft ditching. It is build up from a consortium of experts from OEM industries, experienced suppliers of simulation technologies, established research institutions and representatives of the certification authorities. Results of SARAH are expected to support a performance-based regulation and ce ...
Voir le projet

 12

 TERMINÉ 

Decentralised Agile Coordination Across Supply Chains (DIGICOR)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

European manufacturing competes in a global knowledge-driven economy, and thus increasingly seeks competitive advantage through quality, agility and personalisation based on latest advances in IT. Increasing utilisation of IT in mission-critical elements of the production brings opportunities for consistency, transparency and flexibility, bringing the “lot size of 1” closer to reality even for mas ...
Voir le projet

 11

 TERMINÉ 

Electric Propulsion Innovation and Competitiveness (EPIC)

Date du début: 1 oct. 2014, Date de fin: 30 sept. 2019,

EPIC proposes a Programme Support Activity which will produce a clear integrated roadmap & masterplan for its implementation through a Strategic Research Cluster (SRC) on In-space Electrical Propulsion & Station-Keeping.EPIC plans to do a survey of the current worldwide Electric Propulsion (& related) technologies & their TRL. A collection of requirements from all stakeholders will be done, also a ...
Voir le projet

 9

 TERMINÉ 

Zero-defect manufacturing of composite parts in the aerospace industry (ZAero)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

In the aerospace industry very high quality standards have to be met. For the manufacturing of carbon fibre parts this is currently solved through extended end-of-line inspection in combination with re-work processes to deal with defective parts. Also, in-situ visual inspection is used for quality control, which is currently causing huge productivity losses (30%-50%) during lay-up and has become a ...
Voir le projet

 7

 TERMINÉ 

PERASPERA (AD ASTRA) Plan European Roadmap and Activities for SPace Exploitation of Robotics and Autonomy (PERASPERA)

Date du début: 1 oct. 2014, Date de fin: 30 sept. 2019,

...g “Through hardships to the stars”) aims at developing an integrated master plan (a.k.a. roadmap) of activities and associated activity descriptions, for a Strategic Research Cluster (SRC) in Space Robotics Technology. The roadmap will be implemented within a Strategic Research Cluster (SRC) through operational grants, which will be recommended by PERASPERA and issued by the European Commission. P ...
Voir le projet

 6

 TERMINÉ 

EUROPEAN ESRs NETWORK ON SHORT PULSED LASER MICRO/NANOSTRUCTURING OF SURFACES (LASER4FUN)

Date du début: 1 sept. 2015, Date de fin: 31 août 2019,

Today, industrial markets demand highly added value products offering new features at a low-cost. To this extent, technologies to modify surfaces instead of creating composites or applying coatings on surfaces can offer new industrial opportunities. Current state of the art identifies short pulsed(SP)/ultra-short pulsed(USP) laser-material processing as a promising technology for structuring surfa ...
Voir le projet

 10

 TERMINÉ 

EUROPLANET 2020 Research Infrastructure (EPN2020-RI)

Date du début: 1 sept. 2015, Date de fin: 31 août 2019,

...y providing the underpinning facilities that European planetary scientists need to conduct their research, EPN2020-RI will create cooperation and effective synergies between its different components: space exploration, ground-based observations, laboratory and field experiments, numerical modelling, and technology.EPN2020-RI builds on the foundations of successful FP6 and FP7 Europlanet programmes ...
Voir le projet

 35

 TERMINÉ 

EnhANcing emergencY management and response to extreme WeatHER and climate Events (ANYWHERE)

Date du début: 1 juin 2016, Date de fin: 31 août 2019,

...rotection and saving lives.ANYWHERE proposes to implement a Pan-European multi-hazard platform providing a better identification of the expected weather-induced impacts and their location in time and space before they occur. This platform will support a faster analysis and anticipation of risks prior the event occurrence, an improved coordination of emergency reactions in the field and help to rai ...
Voir le projet

 32

 TERMINÉ 

Rf Engineered substrates to FostER fEm performaNCE (REFERENCE)

Date du début: 1 déc. 2015, Date de fin: 31 mai 2019,

The REFERENCE project aims to leverage a European leading edge Radio Frequency (RF) ecosystem based on RF Silicon On Insulator (SOI) disruptive technology, perceived as the most promising to address performance, cost and integration needs for RF Front End Modules (FEMs)s.The project targets to develop over the next 3 years, innovative solutions from material, engineered substrates, process, design ...
Voir le projet

 18

 TERMINÉ 

Flexible FE/BE Sensor Pilot Line for the Internet of Everything (IoSense)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2019,

The EU has set the stage to empower semiconductor manufacturing in Europe being one of the key drivers for innovation and employment and creator for answers to the challenges of the modern society. Aim of IoSense is to boost the European competitiveness of ECS industries by increasing the pilot production capacity and improving Time-to-Market for innovative microelectronics, accomplished by establ ...
Voir le projet

 33

 TERMINÉ 

European Initiative to Enable Validation for Highly Automated Safe and Secure Systems (ENABLE-S3)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2019,

ENABLE-S3 will pave the way for accelerated application of highly automated and autonomous systems in the mobility domains automotive, aerospace, rail and maritime as well as in the health care domain. Virtual testing, verification and coverage-oriented test selection methods will enable validation with reasonable efforts. The resulting validation framework will ensure Europeans Industry competiti ...
Voir le projet

 76

 TERMINÉ 

Efficient Composite parts manufacturing (EFFICOMP)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2019,

The main objectives are to propose R&D activity to reduce cost and increase ramp up production of composite parts for structural application on aerospace products. These objectives are fully in line with objectives of the call MG1.8. European partners consortium is composed with end user (AIRBUS Group) and research laboratories (DLR, Stuttgart University, Delft University) and a dissemination expe ...
Voir le projet

 6

 TERMINÉ 

Architecture-driven, Multi-concern and Seamless Assurance and Certification of Cyber-Physical Systems (AMASS)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2019,

Embedded systems have significantly increased in technical complexity towards open, interconnected systems. This has exacerbated the problem of ensuring dependability in the presence of human, environmental and technological risks. The rise of complex Cyber-Physical Systems (CPS) has led to many initiatives to promote reuse and automation of labor-intensive activities. Two large-scale projects are ...
Voir le projet

 32