Rechercher des projets européens

16 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

High energy lithium sulphur cells and batteries (HELIS)

Date du début: 1 juin 2015, Date de fin: 31 mai 2019,

Lithium sulphur batteries (LSB) are viable candidate for commercialisation among all post Li-ion battery technologies due to their high theoretical energy density and cost effectiveness. Despites many efforts, there are remaining issues that need to be solved and this will provide final direction of LSB technological development. Some of technological aspects, like development of host matrices, in ...
Voir le projet

 16

 TERMINÉ 

Large Organic Robust Imager for X-ray sensing (LORIX)

Date du début: 1 févr. 2015, Date de fin: 31 juil. 2018,

General X-ray image sensing is undergoing a major transition away from analog solutions towards Direct Radiography using digital Flat-Panel Detector (FPD) technology, offering immediate imaging, large productivity, lower dose and portability. LORIX will develop, prototype and demonstrate large area X-ray FPD detectors enabled by TOLAE technology by combining a printed Organic Photo Diode (OPD) wit ...
Voir le projet

 12

 TERMINÉ 

Preparing R2 extension to 300mm for BCD Smart Power (R2POWER300)

Date du début: 1 juil. 2015, Date de fin: 30 juin 2018,

R2POWER300 is committed to challenge the following Objectives: • Development and manufacturing of a multi-KET Pilot Line (i.e. Nanoelectronics, Nanotechnology, Advanced Manufacturing) • Energy Efficiency and CO2 Reduction megatrends.The project aims to achieve the following Goals:1. Set the stage for the future extension to 300mm of the R2 Fab facility located in Agrate Brianza (Italy) - i.e. l ...
Voir le projet

 10

 TERMINÉ 

An integrated pilot line for micro-fabricated medical devices (InForMed)

Date du début: 1 juin 2015, Date de fin: 31 mai 2018,

The goal of the InForMed project is to establish an integrated pilot line for medical devices. The pilot line includes micro-fabrication, assembly and even the fabrication of smart catheters. The heart of this chain is the micro-fabrication and assembly facility of Philips Innovation Services, which will be qualified for small/medium-scale production of medical devices. The pilot facility will be ...
Voir le projet

 40

 TERMINÉ 
This R&I action will focus on optimally combining traditional roll-to-roll (R2R) compatible fabrication technologies such as printing with unique R2R sputtering, ALD and heterogeneous integration for flexible, thin, large-area electronics applications. It is seen that the different R2R fabrication methods all have their strengths and weaknesses such that using a cost-performance-optimized combinat ...
Voir le projet

 11

 TERMINÉ 
The main objective is to develop an innovative large area distributed sensor network integrating transparent thin film thermoelectric devices and sensors for multifunctional smart windows and flexible high impact volume applications. Different breakthrough concepts are proposed: 1) large area high performance transparent thermoelectric thin films deposited on flexible substrates for thermal energy ...
Voir le projet

 11

 TERMINÉ 
The thermal properties of nanostructured materials are of fundamental importance to modern technology, but at present reproducible metrological definitions, tools and methods do not exist. This is because the mechanisms of heat transport at the nanoscale are entirely different to those at the macro scale.The project will place nanothermal metrology on a solid basis by an integrated physics-based e ...
Voir le projet

 23

 TERMINÉ 
The proposed pilot line project WAYTOGO FAST objective is to leverage Europe leadership in Fully Depleted Silicon on Insulator technology (FDSOI) so as to compete in leading edge technology at node 14nm and beyond preparing as well the following node transistor architecture. Europe is at the root of this breakthrough technology in More Moore law. The project aims at establishing a distributed pilo ...
Voir le projet

 32

 TERMINÉ 
The project 4G-PHOTOCAT allies the expertise of 7 academic and 3 industrial partners from 5 EU countries (Germany, United Kingdom, Czech Republic, Poland, and Finland) and 2 ASEAN countries (Malaysia and Vietnam) for the development of a novel generation of low-cost nano-engineered photocatalysts for sunlight-driven water depollution. Through rational design of composites in which the solar light- ...
Voir le projet

 10

 TERMINÉ 
... , that will enable to obtain an impressive quality of dielectric. Besides technical goals, the PICS project aims also to set-up a cost effective industrial solution.Three SMEs, IPDiA, Sentech and Picosun, join forces with two research institutes, Fraunhofer and CEA, to response to these challenges. The first targeted markets are the high-end integrated capacitors for medical applications and the f ...
Voir le projet

 5

 TERMINÉ 

LAB FAB for smart sensors and actuators MEMS (LAB4MEMS)

Date du début: 1 janv. 2013, Date de fin: 1 juin 2015,

General GoalsLab4MEMS will feature the Pilot Line for innovative technologies on advanced piezoelectric and magnetic materials, expected to fuel the next generation’s smart sensors and actuators based on MEMS:1. Micro-actuators, micro-pumps, sensors and electrical power generators, integrated on silicon-based piezoelectric materials (PZT) • for use in Data Storage, Ink Jet, Health Care, Automot ...
Voir le projet

 21

 TERMINÉ 
POLYCAT provides an integrated, coherent and holistic approach utilizing novel polymer based nanoparticulate catalysts in pharmaceutical, crop protection and vitamin syntheses in conjunction with the enabling functions of micro process technology and “green” solvents such as water or ethyl lactate. This provides a discipline bridging approach between fine chemistry, catalysis and engineering. This ...
Voir le projet

 22

 TERMINÉ 
Future wireless communication systems need to cope with the increased number of frequency bands and advanced mobile phone standards supporting high data rates. At the same time mobile phone systems have to become more energy-efficient in order to contribute to the Grand Challenge “CO2-reduction”. The EPAMO project will address both aspects by exploring and implementing multiple innovative process ...
Voir le projet

 16

 TERMINÉ 
The ENIAC JU project ESiP is addressing the issues of reliability, failure analysis and testing in innovative system-in-package (SiP) solutions. Highly integrated systems with greater miniaturisation and increased functionality open new markets and improve the quality of life through a wide range of applications. In particular, higher systems integration technologies using multi-chip packaging, th ...
Voir le projet

 40

 TERMINÉ 

All-inorganic nano-rod based thin-film solarcells on glass (ROD-SOL)

Date du début: 1 janv. 2009, Date de fin: 31 déc. 2011,

"Thin film solar cells, based on non-toxic, abundant and air-stable silicon (Si) will probably, based on forecasts, dominate the photovoltaic market in the future and thus replace bulk Si from its leading position. This prognosis is fostered by the strong cost reduction potential due to highly effective materials utilization at low energy consumption. However, thin film Si suffers from inherently ...
Voir le projet

 11

 TERMINÉ 

Corrosion protection with perfect atomic layers (CORRAL)

Date du début: 1 sept. 2008, Date de fin: 31 août 2011,

The aim of this project is to develop high density defect-free ultra-thin sealing coatings with excellent barrier properties and improved corrosion resistance. Their successful functioning will be provided by the synergy of the coating “perfect” morphology and its complex structural design, which can be tailored at the nanoscale. The study will be focused on development of novel nanostructured coa ...
Voir le projet

 15