Rechercher des projets européens

26 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Integrated Research Programme on Wind Energy (IRPWIND)

Date du début: 1 mars 2014, Date de fin: 28 févr. 2018,

IRPWIND is an integrated research programme that combines strategic research projects and support activities within the field of Wind Energy, with the aim of leveraging the long term European research potential. The concept behind this programme is built on the success of existing initiatives supporting the SET Plan Agenda such as the European Energy Research Alliance Joint Programme on Wind Ener ...
Voir le projet

 26

 TERMINÉ 

AdVanced Aerodynamic Tools for lArge Rotors (AVATAR)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2017,

The motivation for the AVATAR project lies in the fact that upscaling wind turbine designs towards 10-20 MW requires radical innovations to make this feasible. Many of these innovationshave a strong aerodynamic component and can be considered as unconventional from an aerodynamic point of view. As such the analysis of the resulting rotor designs falls outside the validated range of applicability o ...
Voir le projet

 14

 TERMINÉ 

Innovative Wind Conversion Systems (10-20MW) for Offshore Applications (INNWIND.EU)

Date du début: 1 nov. 2012, Date de fin: 31 oct. 2017,

The overall objectives of the INNWIND.EU project are the high performance innovative design of a beyond-state-of-the-art 10-20MW offshore wind turbine and hardware demonstrators of some of the critical components. These ambitious primary objectives lead to a set of secondary objectives, which are the specific innovations, new concepts, new technologies and proof of concepts at the sub system and t ...
Voir le projet

 29

 TERMINÉ 

Generally Accepted Reliability Principle with Uncertainty modelling and through probabilistic Risk assessment (GARPUR)

Date du début: 1 sept. 2013, Date de fin: 31 août 2017,

"Power system reliability management means to take decisions under increasing uncertainty (for instance, related to renewable generation). It aims to maintain power system performance at a desired level, while minimizing the socio-economic costs of keeping the power system at that performance level. Seven TSOs (Belgium, Bulgaria, Czech Republic, Denmark, France, Iceland, Norway), together with ele ...
Voir le projet

 20

 TERMINÉ 

Industrial Production Processes for Nanoreinforced Composite Structures (INCOM)

Date du début: 1 sept. 2013, Date de fin: 31 août 2017,

"The main modules of INCOM project are 1) NFC production/modification process 2) Composites consolidation 3) Mechanical testing and modelling. The core of the project is the manufacturing and modification of the nanocellulose. Two alternative approaches for the manufacturing of the in-situ modified nanocellulose will be used: Masuko and pearl milling. Both processes will be conducted in the pre-po ...
Voir le projet

 15

 TERMINÉ 

Multi-terminal DC grid for offshore wind (MEDOW)

Date du début: 1 avr. 2013, Date de fin: 31 mars 2017,

A DC grid based on multi-terminal voltage-source converter is a newly emerging technology, which is particularly suitable for the connection of offshore wind farms. Multi-terminal DC grids will be the key technology for the European offshore SuperGrid.In this proposal, DC power flow, DC relaying protection, steady state operation, dynamic stability, fault-ride through capability, and impacts of DC ...
Voir le projet

 12

 TERMINÉ 

European High-performance Infrastructures in Turbulence (EUHIT)

Date du début: 1 avr. 2013, Date de fin: 31 mars 2017,

Advances in key economical and societal issues facing Europe, like transport, energy generation, climate change, or industrial, environmental and geophysical mixing processes are obstructed by the lack of understanding of turbulence. To date, models fail to explain many fundamental features of turbulence, from boundary layers and particle transport, to heat transport and turbulence in complex and ...
Voir le projet

 21

 TERMINÉ 

new MAterials and REliability in offshore WINd Turbines technology (MARE-WINT)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2016,

One of the strategic objectives of the industrial initiative of the SET Plan on wind energy is to reduce cost of energy by improving reliability of wind turbines and their components and optimizing operation and maintenance (O&M) strategies. Increasing reliability and optimizing O&M have a direct impact on the availability of wind turbines and thus reduce cost and increase energy output. This stra ...
Voir le projet

 13

 TERMINÉ 

Demonstration of more reliable innovative designs on a 2MW Wind turbine (WINDTRUST)

Date du début: 1 sept. 2013, Date de fin: 31 août 2016,

The objective of the WINDTRUST project is to demonstrate the technical and economic feasibility of innovative and more reliable solutions for multi MW wind turbines in order to improve the competitiveness of wind energy technologies. The selected components of the wind turbine are the rotor (specifically the blade), power electronics (specifically the converter) and Control and communication syste ...
Voir le projet

 9

 TERMINÉ 

Innovative Tools for Electrical System Security within Large Areas (iTESLA)

Date du début: 1 janv. 2012, Date de fin: 31 mars 2016,

6 Transmission System Operators (Belgium, France, Greece, Norway, Portugal and United Kingdom) and CORESO, a TSO coordination centre, together with 13 RTD performers propose a 4 year R&D project to develop and to validate an open interoperable toolbox which will bring support, by 2015, to future operations of the pan-European electricity transmission network, thus favouring increased coordination/ ...
Voir le projet

 23

 TERMINÉ 

WindScanner.eu - The European WindScanner Facility (WINDSCANNER)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2015,

The future high rate of deployment of renewable energy will require a substantial increase in the installed wind power capacity towards 2020 and beyond, in fact this demand corresponds approximately to the installation of one large turbine every hour for the next decade. This is a substantial “grand challenge” as outlined in the Strategic Energy Technology Plan (SET-Plan) from 2009, which is the t ...
Voir le projet

 10

 TERMINÉ 

INdustrialization setup of a FLoating Offshore Wind turbine (INFLOW)

Date du début: 1 sept. 2011, Date de fin: 31 août 2015,

The INdustrialization setup of a FLoating Offshore Wind turbine (INFLOW) project participates to the development of an innovative solution for the offshore wind market. The main role of the project will be to demonstrate the cost competitiveness of the solution and to bridge the gap in between the development and industrialization phases of the technology. The development started with the validati ...
Voir le projet

 10

 TERMINÉ 

EERA Design Tools for Offshore Wind Farm Cluster (EERA-DTOC)

Date du début: 1 janv. 2012, Date de fin: 30 juin 2015,

The European Energy Research Alliance (EERA) together with some high-impact industry partners addresses the call proposing an integrated and validated design tool combining the state-of-the-art wake, yield and electrical models available in the consortium, as a plug-in architecture with possibility for third party models. To decrease uncertainties around wind farm wake predictions, a small measur ...
Voir le projet

 23

 TERMINÉ 

Modular Multi-use Deep Water Offshore Platform Harnessing and Servicing Mediterranean, Subtropical and Tropical Marine and Maritime Resources (TROPOS)

Date du début: 1 févr. 2012, Date de fin: 31 janv. 2015,

The key objective of the TROPOS project is the development of a floating modular multi-use platform system for use in deep waters, with an initial geographic focus on the Mediterranean, Tropical and Sub-Tropical regions but designed to be flexible enough not to be limited in geographic scope.The TROPOS approach is centered on the modular development where different types of modules can be combined ...
Voir le projet

 21

 TERMINÉ 

Future Deep Sea Wind Turbine Technologies (DeepWind)

Date du début: 1 oct. 2010, Date de fin: 30 sept. 2014,

The hypothesis of this project is that a new wind turbine concept developed specifically for offshore application has potentials for better cost efficiency than existing offshore technology. Based on this hypothesis the objectives are: i)to explore the technologies needed for development of a new and simple floating offshore concept with a vertical axis rotor and a floating and rotating foundation ...
Voir le projet

 12

 TERMINÉ 

High Altitude Wind Energy (HAWE)

Date du début: 1 oct. 2010, Date de fin: 30 sept. 2014,

The quest for clean and renewable energy sources found tremendous potential in wind power. So far, it has been harvested mostly by wind towers, which use only wind currents close to the ground (bellow 200m of height). Since low altitude wind currents are slow and intermittent, most wind farms operate, on average, 25-35% of their capacity. This represents a severe limitation to current state-of-art ...
Voir le projet

 7

 TERMINÉ 

Marine Renewable Integrated Application Platform (MARINA Platform)

Date du début: 1 janv. 2010, Date de fin: 30 juin 2014,

MARINA is a European project dedicated to bringing offshore renewable energy applications closer to the market by creating new infrastructures for both offshore wind and ocean energy converters. It addresses the need for creating a cost-efficient technology development basis to kick-start growth of the nascent European marine renewable energy (MRE) industry in the deep offshore – a major future gl ...
Voir le projet

 18

 TERMINÉ 

Technology platform Operational Programme Wind (TOP WIND)

Date du début: 1 févr. 2011, Date de fin: 30 avr. 2014,

The European Wind Energy Technology Platform (TPWind), established in 2005, is today a well-established and broadly recognized network of approximately 150 wind energy experts, who play a key role in supporting the development of wind power in Europe.For the last three years, the costs of its Secretariat, hosted by the EWEA in Brussels, have been covered by the FP6 “Windsec” project, which was ver ...
Voir le projet

 3

 TERMINÉ 

Distributed Energy Resources Research Infrastructure (DERRI)

Date du début: 1 sept. 2009, Date de fin: 31 déc. 2013,

DERRI has as its primary objective the further integration of the European Distributed Energy Re-sources research community through the provision of User Access to a unique portfolio of important European Laboratories in the field of Distributed Energy Resources, focusing mainly system and architectural aspects of smart energy network based on Distributed Generation.
Voir le projet

 18

 TERMINÉ 

Training future mechanical, civil, electrionic engineers and computer scientists in SYStem Identification, Condition & Health Monitoring for a New Generation of WIND Turbines (SYSWIND)

Date du début: 1 déc. 2009, Date de fin: 30 nov. 2013,

Growth in the European wind energy market has led to the manufacture of larger turbines (~ 7.5 MW). There are several challenges associated with these turbines, particularly offshore, e.g., vibrations/ damage of the flexible blades, mechanical drives/electric converters. These raise maintenance concerns and result in operational downtime, impacting on power systems and supply reliability. For thes ...
Voir le projet

 8

 TERMINÉ 

Wind Resource Assessment Audit and Standardization (WAUDIT)

Date du début: 1 oct. 2009, Date de fin: 30 sept. 2013,

"The objective of WAUDIT is the generation of a pool of researchers, in the field of wind resource assessment, in order to support the technological development of wind energy as one of the fastest growing industries worldwide (annual increase rate of 20%). The scientific motivation of the project is grounded on current state-of-the-art at industrial level. A technical audit to industry provides t ...
Voir le projet

 13

 TERMINÉ 

Virtual Campus Hub

Date du début: 1 oct. 2011, Date de fin: 30 sept. 2013,

Description Virtual Campus Hub (VCH)Higher education and industrial innovation are challenged by today's fast development in the natural sciences, engineering, technology, and economy, underpinned by the dramatic advances in information technology. Education in universities and their effort in innovation haven’t really adjusted to this trend ...
Voir le projet

 4

 TERMINÉ 

Transmission system operation with large penetration of Wind and other renewable Electricity sources in Networks by means of innovative Tools and Integrated Energy Solutions (TWENTIES)

Date du début: 1 avr. 2010, Date de fin: 30 sept. 2013,

A group of 6 Transmission System Operators (Belgium, Denmark, France, Germany The Netherlands and Spain) with 2 generator companies, 5 manufacturers and research organisations, propose 6 demonstration projects to remove, in 3 years, several barriers which prevent the electric system from welcoming more wind electricity, and wind electricity from contributing more to the electric system. The full s ...
Voir le projet

 29

 TERMINÉ 

Multi-scale data assimilation, advanced wind modeling and forecasting with emphasis to extreme weather situations for a secure large-scale wind power integration (SafeWind)

Date du début: 1 sept. 2008, Date de fin: 31 août 2012,

The integration of wind generation into power systems is affected by uncertainties in the forecasting of expected power output. Misestimating of meteorological conditions or large forecasting errors (phase errors, near cut-off speeds etc), are very costly for infrastructures (i.e. unexpected loads on turbines) and reduce the value of wind energy for end-users. The state of the art in wind power fo ...
Voir le projet

 21

 TERMINÉ 

Novel technology for HIgh-PERformance piezoelectric Actuators (HIPER-Act)

Date du début: 1 sept. 2008, Date de fin: 31 août 2012,

Piezoelectric multilayer actuators performance and reliability needs to be improved to meet the growing demand from end-users with many different types of applications. The high production costs and problems related to obtaining reliable components explain that the utilization of piezo actuators up to now is far from having reached its full potential. Noliac and its partners for the IP are proposi ...
Voir le projet

 15

 TERMINÉ 

Design of optimised systems for monitoring of radiation and radioactivity in case of a nuclear or radiological emergency in Europe (DETECT)

Date du début: 1 juil. 2009, Date de fin: 31 déc. 2011,

"The Call for this project proposal describes the objective as “to develop a methodology for optimising the design of monitoring systems for timely and effective decision making in an emergency”. This objective together with the expected impact (“A tool for making more efficient use of monitoring resources and improving the bases for decision making in emergencies, in particular in the context of ...
Voir le projet

 6