26 projets européens trouvés
Recherche sur 125080 projets européens
TERMINÉ
Innovative Product for train door condition monitoring based on vibration analysis algorithms (VA-RCM)
Date du début: 1 janv. 2017, Date de fin: 31 déc. 2018,
...ts. To overcome this, a consortium led by German SME Hitex, have come together with the aim to rapidly seize the business opportunity presented by commercializing the VA-RCM system.VA-RCM is a highly innovative condition monitoring system based on cutting-edge technology involving advanced vibration analysis techniques. Its unique features will enable accurate assessment of train door actuators as ...
Voir le projet
5
Participants partenaires
TERMINÉ
Rapid Integrity Assessment of Flexible Risers for Offshore Oil and Gas Installations (RiserSure)
Date du début: 1 déc. 2016, Date de fin: 30 nov. 2018,
This action will bring to market a unique product, RiserSure™, for assessing the condition of flexible riser pipes widely used in offshore oil and gas production. Riser failure is increasing and is costly (€3M per day from lost production alone). It damages the environment and creates the potential for major incidents. The Gulf of Mexico disaster in 2010 prompted very recent new safety legislation ...
Voir le projet
5
Participants partenaires
TERMINÉ
In-service intrusive Non-Destructive Testing of above ground and underground petrochemical storage tank floors and walls to detect corrosion (TankRob)
Date du début: 1 mai 2016, Date de fin: 30 avr. 2018,
It is estimated that 20% of storage tank accidents are caused by cracks or raptures on the tank structure. The majority of the bulk liquids stored in these tanks include crude oil and derived products which are extremely hazardous to the environment; a spill of only one gallon of oil can contaminate a million gallons of water.Storage tank NDT inspection is very costly and degrading to the environm ...
Voir le projet
5
Participants partenaires
TERMINÉ
Cyber Physical System based Proactive Collaborative Maintenance (MANTIS)
Date du début: 1 mai 2015, Date de fin: 30 avr. 2018,
...or global decision making. The research addressed in MANTIS will contribute to companies' assets availability, competitiveness, growth and sustainability. Use cases will be the testing ground for the innovative functionalities of the proactive maintenance service platform architecture and for its future exploitation in the industrial world. Results of MANTIS can be utilised directly in several ind ...
Voir le projet
47
Participants partenaires
TERMINÉ
Continuous structural condition tank integrity monitoring of Above Ground Storage Tanks, aka “SafeAST, no entry: no empty.” (SafeAST)
Date du début: 1 déc. 2015, Date de fin: 30 nov. 2017,
The purpose of this action is to assist the €2.8bn European and global liquid storage and distribution industry in reducing the costs involved in ensuring that leaks do not occur from 500,000 above ground storage tanks (ASTs), thus avoiding avoid damage to the environment and the loss of revenue from the unscheduled outages of leaking tanks, currently estimated at €132m. At its core is the explo ...
Voir le projet
5
Participants partenaires
TERMINÉ
Development of novel Non Destructive Testing (NDT) techniques and autonomous robots to be deployed by Remote Operating Vehicles for the sub-sea inspection of offshore structure welds - DEMOnstration (SubCTestDEMO)
Date du début: 1 oct. 2014, Date de fin: 30 sept. 2016,
The SubCTest Demo project, a continuation of the FP7 R4S SubCTest project, has the objective to successfully demonstrate a robust NDT system, deployed by a Remote Operating Vehicle (ROV), that will reliably detect and evaluate discontinuities in pipes, risers and tubular structural components, including the welds.Long range ultrasonic testing (LRUT) will be used to detect, locate and qualitative ...
Voir le projet
6
Participants partenaires
TERMINÉ
Vortex Robot for Rapid Low Cost Scanning and Improved Non-Destructive Testing of Large Concrete Structures (VORTEXSCAN)
Date du début: 1 juil. 2014, Date de fin: 30 juin 2016,
...ce while its wheels move it around. Novel phased array Ground Penetrating Radar (GPR) will be one of the two NDT equipment carried by the robot. Low frequency ultrasonics will also be deployed and an innovative fusion of data from the two techniques will be performed. The fusion will diminish the drawbacks of each technique and create an accurate representation of the underlying material and its d ...
Voir le projet
8
Participants partenaires
TERMINÉ
Automated mechanical property and fatigue life assessment of composite wind turbine blades in less than 4 hours (AutoWinSpec)
Date du début: 1 mars 2014, Date de fin: 31 mai 2016,
The wind turbine industry is one of the fastest growing markets. Current turbines are huge with turbine rotor diameters of over 100m becoming standard. EU energy policy calls for 20% of the EU's 3040Th/y electricity demand to come from renewable sources by 2020, which constitutes a market of some 140€ billion and wind energy is the clear front runner.Presently in situ blade inspection is carried o ...
Voir le projet
9
Participants partenaires
TERMINÉ
Continuous monitoring systems for the SAFE storage, distribution and usage of Hydrogen POWER for transport (SAFE H POWER)
Date du début: 1 févr. 2014, Date de fin: 31 janv. 2016,
The limited supplies of traditional fossil fuels and environmental damage caused by their CO2 emissions have caused a growing interest in the exploitation of renewable energy sources. By far the most promising replacement fuel for road transport is hydrogen because of its abundance, efficiency, low footprint for carbon and the absence of other harmful emissions. In 2015 it is expected that the num ...
Voir le projet
7
Participants partenaires
TERMINÉ
High Temperature Pipe Structural Health Monitoring System utilising Phased Array probes on TOFD configuration (HOTPHASEDARRAY)
Date du début: 1 janv. 2014, Date de fin: 31 déc. 2015,
Uncertainties in the calculation of the lifetime of superheated steam pipes in power plants that contain a minor defect create situations with potentially catastrophic results, typically costing €120 million per event. Superheated steam pipes are periodically inspected and depending on their defects sizes they may be replaced after a lifetime assessment has been performed. Common errors in defect ...
Voir le projet
8
Participants partenaires
TERMINÉ
In-Line Service For Internal Inspection Of Unpiggable Buried Oil Pipelines Using Long Range Ultrasound Guided Waves In Fifty Metre Segments (PIGWAVES)
Date du début: 1 avr. 2013, Date de fin: 31 mars 2015,
This proposal will aim to develop the enabling technology that will enable existing pipe crawling robots (pigs) to provide internal inspection of pipe walls using long range ultrasound guided waves (LRUG) deployed in pipe segments of about fifty metre length.The aim is to perform total volume inspection far more rapidly, accurately and cheaply than is presently achieved with magnetic and ultrasoni ...
Voir le projet
8
Participants partenaires
TERMINÉ
Application of the innovative data fusion based non-invasive approach for management of the diabetes mellitus (SKINDETECTOR)
Date du début: 1 nov. 2012, Date de fin: 31 oct. 2014,
Diabetes mellitus (DM) is a heterogeneous group of disorders characterized by a high serum glucose level and by disturbances of carbohydrate and lipid metabolism.Diabetics had a greater prevalence of skin manifestations in type 2 than type 1, and as the duration of the DM increased, the likelihood of developing skin manifestations also increased.Early referral to the dermatologist may help to dete ...
Voir le projet
10
Participants partenaires
TERMINÉ
Development and Validation of an automated Ultrasonic system for the Non-Destructive Evaluation (NDE) of welded joints in thermoplastic storage tanks (PolyTank)
Date du début: 1 nov. 2012, Date de fin: 31 oct. 2014,
Plastics tanks are normally designed for a finite life, usually between 15 and 25 years. However, due to economic pressure many of these tanks are still in operation beyond their design life, often with little or no engineering justification. It is also not uncommon for plastics tanks to be used for storing chemicals that they were not designed to contain. For these reasons it is important that op ...
Voir le projet
9
Participants partenaires
TERMINÉ
Prevention and detection of fouling on ship hulls (CLEANSHIP)
Date du début: 1 sept. 2012, Date de fin: 31 août 2014,
"Biofouling is the adhesion of biological materials to hard surfaces, such as ship hulls, in a marine environment and it can commence within seconds of the immersion of a ship’s hull in the sea. After 6 months without protection against marine fouling deposits, biofouling growth increases the drag on a hull so much as to cause a ship to use up to 40% more fuel and correspondingly to produce 40% m ...
Voir le projet
9
Participants partenaires
TERMINÉ
In-situ wireless monitoring of on - and offshore WINd TURbine blades using energy harvesting technology - Demonstration (WINTUR DEMO)
Date du début: 1 sept. 2012, Date de fin: 31 août 2014,
"WINTUR Demonstration Project will demonstrate the structural health monitoring (SHM) system that was developed successfully in the WinTur R4S project, in order to show that such a system is viable for blade monitoring and can help the wind sector to achieve the kind of energy delivery to business and communities that is desired by reducing operational and maintenance costs. This will be achieved ...
Voir le projet
10
Participants partenaires
TERMINÉ
Development of Advanced Shearography System for On-Site Inspection of Wind Turbine Blades (DashWin)
Date du début: 1 oct. 2011, Date de fin: 31 mai 2014,
Wind energy is a fast growing (>20% pa) industry worldwide and European companies have two-thirds of the share, according to European Wind Energy Association. Due to the increase in wind farms, new techniques are required to provide maintenance and inspection of the wind installations with reduced cost and enhanced reliability. It is estimated that the business opportunity for wind turbine blade i ...
Voir le projet
10
Participants partenaires
TERMINÉ
Adapted Composite Repair Tooling for in-situ wind turbine blades structural rehabilitation (CORETO)
Date du début: 1 avr. 2012, Date de fin: 31 mars 2014,
"The wind turbine industry is the fastest growing market area for the use of composite materials. Current state-of-the-art turbines are increasing in size, providing multi-megawatt power output. To generate such power turbine rotorblade diameters exceeding 100m along with nacelle heights of 120m are becoming standard. As turbines grow and their deployment becomes more widespread and remote, it is ...
Voir le projet
9
Participants partenaires
TERMINÉ
Demonstration of a Condition Monitoring System for Tidal Stream Generators (TidalSense Demo)
Date du début: 1 févr. 2012, Date de fin: 31 janv. 2014,
The TidalSense Demo project has been conceived by the SMEs intending to exploit a new market with huge potential growth, in Condition Monitoring of subsea energy device elements using the TidalSense System. The TidalSense condition monitoring system has been developed to detect, locate and classify defects in tidal generator structures. The Demo project will allow the SMEs to demonstrate and valid ...
Voir le projet
13
Participants partenaires
TERMINÉ
Automated inspection for sintered parts by non-destructive techniques for improved quality in production (AUTOINSPECT)
Date du début: 1 oct. 2011, Date de fin: 31 déc. 2013,
"Sintered parts obtained by the powder metallurgy process are employed in several industry sectors, especially automotive. They are typically intricate, complex shaped parts produced in near net shape by compaction of powders into a geometry followed by sintering of the compacts for consolidation, where particles are bonded upon heating. The powder metallurgy process, by nature, is suited to high ...
Voir le projet
8
Participants partenaires
TERMINÉ
DEVELOPMENT OF AN ADVANCED MEDIUM RANGE ULTRASONIC TECHNIQUE FOR MOORING CHAINS INSPECTION IN WATER (MoorInspect)
Date du début: 1 oct. 2011, Date de fin: 30 sept. 2013,
The Moorinspect project will bring a step change to the current in-water moor chain inspection systems through the development and introduction of new method for detection of fatigue cracks in the large chain links used in Deepwater offshore facilities.Moorinspect main objective would be to develop a medium range ultrasonic in-water testing technology using Ultrasonic Guided Waves (UGW) method to ...
Voir le projet
9
Participants partenaires
TERMINÉ
Development of an intelligent condition monitoring system for application on critical rotating components of industrial-scale wind turbines (INTELWIND)
Date du début: 1 oct. 2011, Date de fin: 30 sept. 2013,
"Wind energy currently provides approximately 3% of the overall European electricity production. However, with the current growth trends exhibited the wind energy industry is capable of delivering 12% of the overall European power production by 2020 and more than 20% by 2030.Operation and maintenance costs (O&M) constitute a sizeable share of the total annual costs of a wind turbine. For a new mac ...
Voir le projet
9
Participants partenaires
TERMINÉ
Continuous Reliable Advanced Novel Efficient Structural Health Monitoring system for crane inspection applications (CRANESInspect)
Date du début: 1 oct. 2011, Date de fin: 30 sept. 2013,
There is a vital need for systems to continuously monitor the structural health of the cranes. Cranes are of the most common machinery used in industry. Cranes of any type are used for the manipulation of loads, depending on load specifications as well as task requirements, accessibility and cost. They are installed in industrial plants, construction sites, shipyards, ports, etc.In 2008, there wa ...
Voir le projet
7
Participants partenaires
TERMINÉ
Magnetostrictive sensor applications for self-sensing of composite structures (MAGNASENSE)
Date du début: 1 avr. 2012, Date de fin: 31 juil. 2013,
"The aim of MAGNASENSE is to develop the appropriate smart maintenance technologies, using magnetostrictive sensors, in order to enable self-sensing of the strain field developed in components manufactured by CFRP. For this reason, all the hardware (embedded sensors – sensing elements etc.) and software (transformation of measurements to strain readings, ispection supporting fotware, initial corre ...
Voir le projet
3
Participants partenaires
TERMINÉ
An ICT Enabled Approach to Optimising the Reliability of Manual Ultrasonic Non-destructive Testing (ICARUS)
Date du début: 1 janv. 2011, Date de fin: 31 déc. 2012,
"Manual Ultrasonic Non Destructive Testing is a long established and extensively adopted inspection technology, embedded in and vital to the integrity and performance management of capital assets in safety critical industries including aerospace, chemical processing and power generation. Of all available volumetric inspection systems, ultrasonic testing is recognised as providing the highest sensi ...
Voir le projet
10
Participants partenaires
TERMINÉ
Ultrasonic detection and removal of fouling inside industrial and domestic pipes (UltraCleanPipe)
Date du début: 1 déc. 2010, Date de fin: 30 nov. 2012,
Fouling, as defined in this project, is the presence of unintended and unwanted deposits on the inside walls of industrial plant such as pipes, storage vessels, reactor vessels etc. Its occurrence is widespread though all industries, particularly oil and petrochemical pipelines, petrochemical plant, other chemical plant, pharmaceutical production, food processing as well as in plumbing systems thr ...
Voir le projet
7
Participants partenaires
TERMINÉ
Development of a condition monitoring system for tidal stream generator structures (TidalSense)
Date du début: 1 sept. 2009, Date de fin: 31 août 2011,
Due to the increasing demand for renewable energy, a great deal of effort is being put into the development of tidal power generation systems. As these systems go in to commercial production and service, it is important to consider and develop inspection and condition monitoring techniques and systems. Condition monitoring of such systems could be used to greatly reduce the risk of failures and th ...
Voir le projet