Plus de 40 projets européens trouvés
Recherche sur 125080 projets européens
TERMINÉ
Conversion of Low Grade Heat to Power through closed loop Reverse Electro-Dialysis (RED-Heat-to-Power)
Date du début: 1 mai 2015, Date de fin: 30 avr. 2019,
...ctricity from salinity gradient using Reverse Electrodialysis with artificial saline solutions operating in a closed-loop. The original salinity gradient is regenerated by a separation step that uses heat at 40 - 100 C. The regenerated solutions can be stored at very low costs and the stack can react within seconds, providing flexibility to the power system. It is a quiet technology operating unde ...
Voir le projet
7
Participants partenaires
TERMINÉ
Waste Heat Recovery Power Generation Based on ORC Technology in Foundry Industry (FOUNDENERGY)
Date du début: 1 déc. 2011, Date de fin: 30 nov. 2014,
...ise and control the exploitation of an innovative cutting edge technology into the EU and worldwide markets. Also, important benefit is ecological improvement of our environment, e.g. less CO2 and heat disposal into atmosphere.Hence with this paper we are proposing a product that will still remain profitable even with future lower electricity energy tariffs through incentives, resulting with estim ...
Voir le projet
12
Participants partenaires
TERMINÉ
Flexible Heat and Power, Connecting heat and power networks by harnessing the complexity in distributed thermal flexibility. (FHP)
Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,
The annual space heating and cooling energy consumption in Europe is almost 3,500TWh. In 2012, in EU28 the electricity consumption ratio was around the 20% of the total energy consumption, from which 30% was consumed in the residential and 30% in the services sectors. From these proportions, air conditioning represents 17% of the total electricity consumption in the EU27 residential buildings. In ...
Voir le projet
7
Participants partenaires
TERMINÉ
Demonstration of a small-scale mobile agricultural residue gasification unit for decentralized combined heat and power production (SMARt-CHP)
Date du début: 1 janv. 2010, Date de fin: 31 déc. 2012,
Background
Bioenergy can play an important role in addressing climate change as well as improving the security of energy supply in Europe. Small-scale heat and power generation from biomass is in principle able to deliver significant energy and emissions savings through the substitution of substantial quantities of fossil fuels. In particular, the use of ...
Voir le projet
3
Participants partenaires
TERMINÉ
Development of a Novel Compact Multi Fuel Steam Reforming Device Integrated into a cost effective Fuel Cell Micro Combined Heat & Power Generation System for Residential Building Application (H2OME)
Date du début: 1 oct. 2008, Date de fin: 30 sept. 2010,
...ce of the construction sector representing 99% of such industry. The EU Building Sector is a major energy consumer (more than 40% of the total energy consumed in the EU is used to cover the needs for heating, cooling and electricity). According to Directive 2006/32/EC in the community there is a need for improved energy end-use efficiency and according to Directive 2002/91/EC on energy performance ...
Voir le projet
9
Participants partenaires
TERMINÉ
A Novel BIPV-PCM Heat and Power Cogeneration System for Buildings (BIPV-PCM-COGEN)
Date du début: 7 déc. 2012, Date de fin: 6 déc. 2014,
...mal/electrical efficiencies when utilizing micro-encapsulated PCM slurry. This type of module will be designed to provide for flow of properly selected micro-encapsulated PCM slurry, which transfers heat away from the rear of the PV modules, thus decreasing the temperature of the PV cells/modules and increasing their electrical efficiency. The energy carried by the slurry will be used to (1) aid v ...
Voir le projet
1
Participant partenaire
TERMINÉ
Demonstration of a novel thermo-chemical heat storage system to improve energy-efficiency in CHP power plants and in solar driven industrial applications with high relevance in SMEs (HS-Demo)
Date du début: 1 nov. 2012, Date de fin: 31 oct. 2014,
The FP7 R4SME HeatSaver project (Grant Agreement No.: 222116) successfully developed a zeolite based thermo-chemical heat storage concept at an integrated 1000 litre scale with significant advantages compared to SoA technologies in terms of energy density and flexibility. HeatSaver was assessed by the EC Research Executive Agency(REA) as delivering high quality science and technology development: ...
Voir le projet
5
Participants partenaires
TERMINÉ
Small scale Combined Heat and Power based on biomass in the region of southeast Sweden (LIFE+ small scale CHP)
Date du début: 1 juil. 2014, Date de fin: 31 déc. 2018,
Background
Biomass combustion based Combined Heat and Power (CHP) technologies have great potential to reduce CO2 emissions because they use renewable energy sources, such as wood fuels or sawdust. Typical fields of application for biomass CHP plants include: wood processing industries, sawmills, district heating systems and industries with a high process ...
Voir le projet
4
Participants partenaires
TERMINÉ
Breakthrough high performance cost competitive solar concentration system for combined heat and power generation (FOCALSTREAM)
Date du début: 1 mai 2016, Date de fin: 30 avr. 2018,
...es 35% the solar light conversion compared with Solar thermal and Photovoltaic panels separately. Focalstream targets end users of buildings in the residential sector, where the electricity and heat demand can be easily covered with this system.
Voir le projet
3
Participants partenaires
TERMINÉ
An Innovative, environmentally friendly CO2/Lubricant Absorption Power System for Highly efficient Power Generation from Low Temperature industrial waste heat to reduce emissions and costs (ICARUS)
Date du début: 1 août 2012, Date de fin: 31 juil. 2014,
...Es are under increasing threat to remain competitive against non-EU based companies.The aim of the ICARUS project is to create an absorption power generation technology for low temperature (60-120oC) heat. This will enable us to create a waste-heat power generation system for industrial (chemical, cement etc.) applications that can achieve an efficiency of up to 20% for electricity to be generated ...
Voir le projet
10
Participants partenaires
TERMINÉ
Waste Heat Recovery for Power Valorisation with Organic Rankine Cycle Technology in Energy Intensive Industries (TASIO)
Date du début: 1 déc. 2014, Date de fin: 31 mai 2018,
The main objective of the project is to develop solutions to recover the waste heat produced in energetic intensive processes of industrial sectors such as cement, glass, steelmaking and petrochemical and transform it into useful energy. These solutions will be designed after an evaluation of the energetic situation of these four industries and will deal with the development of Waste Heat Recovery ...
Voir le projet
9
Participants partenaires
TERMINÉ
Modular interposer architecture providing scalable heat removal, power delivery, and communication (CarrICool)
Date du début: 1 janv. 2014, Date de fin: 31 déc. 2016,
Modular interposer architecture providing scalable heat removal, power delivery and communicationCarrICool will deliver a game-changing 3D packaging platform for scale-up of future, many-core, Exascale computing systems. The project will also develop a strategic supplier base in Europe for high-end HPC components and systems integration capabilities in the Exascale era. In CarrICool, advanced More ...
Voir le projet
9
Participants partenaires
TERMINÉ
Novel GAsification REactor for combined heat and power Plant (GAREP)
Date du début: 1 juin 2015, Date de fin: 30 nov. 2015,
Drawbacks related to central large scale power production due to high cost of infrastructure and transmission loss resulting in high cost of energy have created a need for small scale local power production. By implementing combined head and power (CHP) solutions local biomass could be used to provide low cost energy. However large scale CHP plants (>10MWe) require large investments while technolo ...
Voir le projet
1
Participant partenaire
TERMINÉ
A new type adsorption-resorption cycle for the combined power generation and refrigeration driven by low grade heat (Adsor-Resor Cycle)
Date du début: 1 janv. 2012, Date de fin: 31 déc. 2012,
A new type of combined cycle of power generation and refrigeration, which is driven by the low grade heat such as the waste heat from chemical engineering factory and combustion turbine, and the low grade heat from solar energy, is proposed in the proposal. This new type cycle mainly includes two high temperature adsorbers with high temperature salt as adsorbent, and two low temperature adsorbers ...
Voir le projet
1
Participant partenaire
TERMINÉ
A Method for On-Line Cleaning of Heat Exchangers to Significantly Increase Energy Efficiency in the Oil, Gas, Power & Chemical Process Sectors (CleanEx)
Date du début: 1 sept. 2009, Date de fin: 28 févr. 2013,
Fouling of heat exchangers in refining industry crude oil preheat trains is a chronic operating problem that reduces heat transfer and energy recovery in these systems costing the industry $4.5 billion per annum. Eight percent of industrial plant operating costs may be attributed to heat exchanger fouling. Despite enormous costs associated with fouling, the industry relies on off-line cleaning b ...
Voir le projet
4
Participants partenaires
TERMINÉ
Innovative Micro Solar Heat and Power System for Domestic and Small Business Residential Buildings (Innova MicroSolar)
Date du début: 1 sept. 2016, Date de fin: 31 août 2020,
...-20” targets and in the European Commission’s Energy Roadmap 2050.The overall objective of this project is to develop an innovative high performance and cost effective 2-kWel/18-kWth solar heat and power system for application in individual dwellings and small business residential buildings for on-site electricity and heat generation using solar thermal energy at temperature levels of 250-280 ...
Voir le projet
9
Participants partenaires
TERMINÉ
Waste Heat Power Generation in Cement Plant (HEATPOWER)
Date du début: 1 janv. 2011, Date de fin: 31 déc. 2012,
"The strategic overall objective of the project is to develop a Waste Heat Recovery system for Power Generation in Cement plants. Waste Heat Recovery system (WHRS) will be based on ORC process, primarily attached to the cement production plant clinker cooler with definitive purpose to produce electrical energy from Low Temperature Waste Heat sources, as clinker exhaust heat is. Specific technologi ...
Voir le projet
9
Participants partenaires
TERMINÉ
Demonstration of a combined heat and power 2 MWe PEM fuel cell generator and integration into an existing chlorine production plant (DEMCOPEM-2MW)
Date du début: 1 janv. 2015, Date de fin: 31 déc. 2018,
"The project DEMCOPEM-2MW is to design, construct and demonstrate an economical combined heat and power PEM fuel cell power plant (2 MW electrical power and 1.5 MW heat) and integration into a chlor-alkali (CA) production plant. A chlor-alkali production plant produces chlorine and caustic soda (lye) and high purity hydrogen. The hydrogen contains almost 45% of the energy that is consumed in the ...
Voir le projet
5
Participants partenaires
TERMINÉ
The integration of intermediate pyrolysis and vapour gasification to create and effective and efficient biomass-to-energy system for combined heat and power (PYROGAS)
Date du début: 1 avr. 2012, Date de fin: 31 mars 2016,
The use of biomass, and waste, as a fuel for the production of energy in the form of electrical power and heat has in recent years come to be recognised as a key element in the move to sustainable forms of energy as part of the strategy to combat climate change. Throughout Europe, challenging targets for the provision of bioenergy and reduction in carbon emissions have been identified but progress ...
Voir le projet
3
Participants partenaires
TERMINÉ
Innovative heat-to-power engine for very low temperature heat recovery applications (IE-E)
Date du début: 1 juil. 2016, Date de fin: 31 déc. 2016,
The strategic objective of the IE-E project is to develop a new heat-to-power engine in low-temperature ranges so that to recover and convert heat to power in a cost effective manner. This will be implemented by using an isothermal, scroll type expander that will replace the conventional (close to) isentropic one that is exclusively included in conventional ORC engines. This configuration can lead ...
Voir le projet
1
Participant partenaire
TERMINÉ
Sustainable development of Croatian capacity in CHP (combined heat and power) sector (LIFECROCHP)
Date du début: 1 janv. 2002, Date de fin: 30 juin 2004,
Background
Combined heat and power (CHP) production has clear environmental advantages. The EU Communication on the promotion of CHP says that it is imperative to encourage the more efficient use of fossil fuels and to reduce the production of green house gases that cause global warming. The fifth EC Environmental Action Programme sets a long-term appro ...
Voir le projet
1
Participant partenaire
TERMINÉ
A new type adsorption-resorption cycle for the combined power generation and refrigeration driven by low grade heat (Adsor-Resor Cycle)
Date du début: 6 déc. 2010, Date de fin: 5 déc. 2011,
A new type of combined cycle of power generation and refrigeration, which is driven by the low grade heat such as the waste heat from chemical engineering factory and combustion turbine, and the low grade heat from solar energy, is proposed in the proposal. This new type cycle mainly includes two high temperature adsorbers with high temperature salt as adsorbent, and two low temperature adsorbers ...
Voir le projet
1
Participant partenaire
TERMINÉ
Upscaling and commercialization of a highly efficient wood pellets fired steam engine CHP for heat and power generation (CHP)
Date du début: 1 janv. 2015, Date de fin: 31 mai 2015,
Upscaling and commercialization of a highly efficient wood pellets fired steam engine CHP for heat and power generation.The aim of this project is the upscaling and commercialization of a developed CHP (combined heat and power generating system) comprising a highly efficient wood pellets fired steam engine. The CHP power output is 50kW electrical and 175kW thermal power with 20% electrical and 90% ...
Voir le projet
1
Participant partenaire
TERMINÉ
Biogas-fired Combined Hybrid Heat and Power Plant (Bio-HyPP)
Date du début: 1 juin 2015, Date de fin: 31 mai 2019,
...as well as increasing operational flexibility, the project aims to develop a full scale technology demonstrator of a hybrid power plant using biogas as main fuel in lab environment. A combined hybrid heat and power plant combines a micro gas turbine (MGT) and a solid oxide fuel cell (SOFC). The focus of the technology demonstration plant is to prove the functional capability of the plant concept, ...
Voir le projet
8
Participants partenaires
TERMINÉ
Cost-effective Combined Heat and Power generator for camping vans (CHeaP)
Date du début: 1 août 2015, Date de fin: 31 juil. 2017,
Camper vans allow being autonomous as regards all services and comforts needed, however, the power supply is often a limitation: to overcome this problem camper vans generally dispose of supplementary batteries for services, mainly necessary when the vehicle is stationary and the engine is switched off, which unfortunately become exhausted after only a few hours of use. The present project aims at ...
Voir le projet
2
Participants partenaires
TERMINÉ
Redox Materials-based Structured Reactors/Heat Exchangers for Thermo-Chemical Heat Storage Systems in Concentrated Solar Power Plants (RESTRUCTURE)
Date du début: 1 nov. 2011, Date de fin: 31 janv. 2016,
ThermoChemical Storage (TCS) involves the exploitation of the heat effects of reversible chemical reactions for the “storage” of solar heat. Among gas-solid reactions proposed for such an approach the utilization of a pair of redox reactions involving multivalent solid oxides has several inherent advantages that make it attractive for large-scale deployment.The new concept introduced in the curren ...
Voir le projet
8
Participants partenaires
TERMINÉ
ALL-SCALE PREDICTIVE DESIGN OF HEAT MANAGEMENT MATERIAL STRUCTURES WITH APPLICATIONS IN POWER ELECTRONICS (ALMA)
Date du début: 1 juin 2015, Date de fin: 31 mai 2018,
Heat management is a paramount challenge in many cutting edge technologies, including new GaN electronic technology, turbine thermal coatings, resistive memories, or thermoelectrics. Further progress requires the help of accurate modeling tools that can predict the performance of new complex materials integrated in these increasingly demanding novel devices. However, there is currently no general ...
Voir le projet
7
Participants partenaires
TERMINÉ
Large scale heat and power generation for a new residential area of Amersfoort by means of innovative biomass gasification; reduced greenhouse gas emissions and optimal utilisation of construction and demolition waste wood as renewable fuel (Vathorst)
Date du début: 1 juin 2003, Date de fin: 30 avr. 2006,
...es of energy, it decreases land-fill and waste incineration.
Furthermore, it helps to reduce the greenhouse effect in two ways: firstly by using a renewable fuel, and secondly by co-generation of heat and power.
The FICB technology (Fast Internal Circulating Fluidised Bed) gasifier was developed at the Technical University of Vienna in the nineties (supported by the European 4th and 5th F ...
Voir le projet
1
Participant partenaire
TERMINÉ
Fusion-to-Fossil Heat Exchanger for Supercritical Power Plants (F2F)
Date du début: 1 mai 2016, Date de fin: 31 août 2016,
...ive projects, large-scale scientific initiatives and new materials. We have successfully participated in the ITER project to manufacture the First Wall panels and their associated Super-Efficient Heat Exchanger. After several years of R&D work in efficient heat exchangers, we have developed an innovative “Fusion-to-Fossil heat exchanger” prototype to be integrated in Boiler Circulating Pumps (BCPs ...
Voir le projet
1
Participant partenaire
TERMINÉ
Engine and turbine combustion of bioliquids for combined heat and power production (Bioliquids-CHP)
Date du début: 1 janv. 2009, Date de fin: 31 déc. 2011,
...eved in comparison to other prime movers (like a gas engine) and, in this case, on the small to medium scale (50 –1000 kWe). The micro gas turbine and diesel engine should be part of a Combined Heat & Power (and Cooling) system. The project focuses on the required modifications of the engine/turbine, fuel preparation, and emission control (especially NOx). Besides, an assessment will be made of ma ...
Voir le projet
7
Participants partenaires
TERMINÉ
Recovered waste cooking oil for combined heat and power production (RECOIL)
Date du début: 1 sept. 2011, Date de fin: 28 févr. 2015,
...lowing collection and storage, the oil will be mechanically treated to remove impurities (food waste, water, etc...) and to produce a fuel for use in an internal combustion engine in a combined heat and power plant in Italy (in the province of Grosseto). In order to achieve its goals, the project will plan, develop, test and optimise the various phases of WCO collection, storage and treatment.
Sp ...
Voir le projet
4
Participants partenaires
TERMINÉ
Development of a heat storage system to improve energy efficiency in CHP power plants and in solar driven industrial applications with high relevance to SME (HEAT SAVER)
Date du début: 1 sept. 2008, Date de fin: 28 févr. 2011,
"The HEAT SAVER proposal will create a novel and portable form of thermo-chemical storage that will be compatible with both existing combined heat and power systems and also with solar energy sources. It will comprise, within a containerised body, a zeolite-based thermo-chemical store, high and low temperature heat exchangers, a water store and its associated control systems. By operating alongsid ...
Voir le projet
8
Participants partenaires
TERMINÉ
Combined Heat, Power and Metal extraction from ultra-deep ore bodies (CHPM2030)
Date du début: 1 janv. 2016, Date de fin: 30 juin 2019,
...tro-metallurgy the project aims at converting ultra-deep metallic mineral formations into an “orebody-EGS” that will serve as a basis for the development of a new type of facility for “Combined Heat, Power and Metal extraction” (CHPM). In the technology envisioned the metal-bearing geological formation will be manipulated in a way that the co-production of energy and metals will be possible, and m ...
Voir le projet
12
Participants partenaires
TERMINÉ
EnerTwin: A different approach to micro CHP (EnerTwin)
Date du début: 1 mars 2016, Date de fin: 28 févr. 2018,
Micro Combined Heat and Power (mCHP) systems are a perfect addition to stabilize the electricity grid in the increased presence of volatile renewable sources. Due to their efficient generation and local use of heat and electricity, their fuel saving- and CO2 reduction potential is tremendous. In spite of great interest of the market and policy-makers, currently available mCHP systems suffer from l ...
Voir le projet
5
Participants partenaires
TERMINÉ
Biomass, remediation, re-generation: Re-using brownfields sites for renewable energy crops. (BioReGen)
Date du début: 1 déc. 2005, Date de fin: 30 avr. 2010,
...thus help clean-up the land, make areas look greener and provide a habitat for wildlife. Furthermore, it targeted the growth of plants that could also be used as biomass crops to generate heat and power, thereby contributing to the mitigation of climate change.
The project aimed to demonstrate the viability of its approach of growing plants on brownfields on an industrial scale, applying the meth ...
Voir le projet
4
Participants partenaires
TERMINÉ
ImplementatioN in real SOFC Systems of monItoring and diaGnostic tools using signal analysis to increase tHeir lifeTime (INSIGHT)
Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,
...e Fuel Cell (SOFC) stacks and the hardware necessary for its implementation into a real SOFC system. The effectiveness of the MDLT will be demonstrated through on-field tests on a real micro-Combined Heat and Power system (2.5 kW), thus moving these tools from Technology Readiness Level (TRL) 3 to beyond 5. INSIGHT leverages the experience of previous projects and consolidates their outcomes both ...
Voir le projet
11
Participants partenaires
TERMINÉ
Solar panels as integrated constructive elements in highway noise barriers (LIFE Solar Highways)
Date du début: 1 juin 2014, Date de fin: 30 juin 2020,
...riers;
Design of a module, based on bifacial PV cells, which can be integrated in highway noise barriers. This module will be prototyped and tested using accelerated lifetime methods such as damp heat testing. Associated beneficiary ECN will also deliver six PV elements that will be monitored at ECN for the remainder of the project; and
A comprehensive benchmark study on PV elements and their us ...
Voir le projet
3
Participants partenaires
TERMINÉ
Waste prevention through sewage sludge reuse for efficient energy generation at waste water treatment sites (SLUDGE2ENERGY)
Date du début: 1 oct. 2006, Date de fin: 30 sept. 2011,
... Objectives
The aim of the SLUDGE2ENERGY project was to demonstrate the decentralised reuse of sewage sludge in an efficient small-scale heat and power generation plant on the premises of the wastewater treatment plant (WWTP). The innovative sludge processing technique was intended for market introduction. The energy self-sufficient plant wo ...
Voir le projet
3
Participants partenaires
TERMINÉ
BLESK
Date du début: 22 mars 2011, Date de fin: 21 mars 2014,
... sources and contribute to sustainable and environmentally friendly energy generation. Energy consumers, which will receive clean, reliable, safe and, in the long run, more economical electricity and heat. Finnish and Russian manufacturers of wind power plants and their components as they will extend their business. Laboratories of Finnish and Russian universities specialising in research and deve ...
Voir le projet
6
Participants partenaires
TERMINÉ
European High Power Laser Energy Research Facility (Preparatory Phase Study) (HIPER)
Date du début: 28 avr. 2008, Date de fin: 27 avr. 2013,
... emissions, minimal waste products, and a scale that can meet mankind’s long-term energy demands. Fusion combines hydrogen isotopes to create helium gas and a neutron which is captured to provide heat for a steam turbine. The IFE solution for fusion is a proven scientific concept. A laboratory demonstration of net energy production using lasers for IFE is now only 2 years away, marking the culmina ...
Voir le projet