21 projets européens trouvés
Recherche sur 125080 projets européens
TERMINÉ
Smart optical and ultrasound diagnostics of breast cancer (SOLUS)
Date du début: 1 déc. 2016, Date de fin: 30 nov. 2020,
SOLUS is a trans-disciplinary 48-month project bringing together 9 partners: industries (4), academic and clinical institutions from 5 countries (engineers, physicists and radiologists) representing cutting-edge expertise in their fields, to develop an innovative non-invasive, point-of-care, low-cost, easy-to-operate, multi-modal imaging system (diffuse optics and ultrasounds/shear wave elastograp ...
Voir le projet
10
Participants partenaires
TERMINÉ
Laser and Ultrasound Co-Analyzer for thyroid nodules (LUCA)
Date du début: 1 févr. 2016, Date de fin: 31 janv. 2020,
This is a trans-disciplinary project that joins endocrinologists (“end-users”), radiologists (“end-users”), physicists who are experts in medical photonics, engineers who are experts in photonics and ultrasonics and the industry to work towards a concentrated goal - to produce a novel, point-of-care, low-cost, screening device that combines two photonics systems (near-infrared diffuse correlation ...
Voir le projet
8
Participants partenaires
TERMINÉ
Smart MEMs Piezo based energy Harvesting with Integrated Supercapacitor and packaging (smart-MEMPHIS)
Date du début: 15 déc. 2014, Date de fin: 14 juin 2018,
Smart-MEMPHIS project addresses the increasing demand for low-cost, energy-efficient autonomous systems by focusing on the main challenge for all smart devices - self-powering. The project aims to design, manufacture and test a miniaturized autonomous energy supply based on harvesting vibrational energy with piezo-MEMS energy harvesters. The project will integrate several multi-functional technolo ...
Voir le projet
9
Participants partenaires
TERMINÉ
Optical Imaging and Laser TEchniques for BIomedical Applications (OILTEBIA)
Date du début: 1 avr. 2013, Date de fin: 31 mars 2017,
...p to multiple paths within academia, research laboratories and industry. The activities of the network will be closely followed by industry, represented in OILTEBIA by leading industry full partners (VERMON, SACHER and PHILIPS) and several associated industrial partners.OILTEBIA has set-up a sophisticated and well coordinated programme in Optical Biomedical Imaging at a European Level. The program ...
Voir le projet
10
Participants partenaires
TERMINÉ
Diagnosis and Monitoring of Inflammatory and Arthritic diseases using a COmbined approach Based on Ultrasound, optoacoustic and hyperSpectral imaging (IACOBUS)
Date du début: 1 janv. 2013, Date de fin: 30 juin 2016,
Rheumatoid arthritis (RA) and psoriasis arthritis (PSA) are destructive polyarthritic diseases having high incidence rates worldwide of about 1,5% and 0,5% respectively. Arthritis-related joint destruction leads to disabilities which result in a loss of patient’s quality of life, often include an inability to work and significant costs for healthcare systems. The functional outcome is strongly dep ...
Voir le projet
7
Participants partenaires
TERMINÉ
High Temperature Pipe Structural Health Monitoring System utilising Phased Array probes on TOFD configuration (HOTPHASEDARRAY)
Date du début: 1 janv. 2014, Date de fin: 31 déc. 2015,
Uncertainties in the calculation of the lifetime of superheated steam pipes in power plants that contain a minor defect create situations with potentially catastrophic results, typically costing €120 million per event. Superheated steam pipes are periodically inspected and depending on their defects sizes they may be replaced after a lifetime assessment has been performed. Common errors in defect ...
Voir le projet
8
Participants partenaires
TERMINÉ
Detection of kissing bonds in friction stir welds in aero structures (StirScan)
Date du début: 1 déc. 2012, Date de fin: 30 nov. 2014,
The proposed StirScan project will develop a NDT system in order to address the challenging problem of detecting kissing bonds in Friction Stir Welds (FSW). FSW is a relatively new joining technique for aluminium alloys which offers good joint performance and excellent reproducibility – this is of significant interest to the aerospace sector, where fatigue performance is particular crucial. Howeve ...
Voir le projet
8
Participants partenaires
TERMINÉ
Best-Reliable Ambient Intelligent Nano Sensor Systems (e-BRAINS)
Date du début: 1 sept. 2010, Date de fin: 28 févr. 2014,
Best-Reliable Ambient Intelligent Nanosensor Systems – e-BRAINS – represent a giant leap for outstanding future applications in the area of ambient living with the ultimate need for integration of heterogeneous technologies, high-performance nanosensor devices, miniaturization, smart wireless communication and best-reliability.e-BRAINS with minimum volume and weight as well as reduced power consum ...
Voir le projet
20
Participants partenaires
TERMINÉ
Development of an automated spot weld inspection device for safe vehicle repair (SpotTrack)
Date du début: 1 nov. 2011, Date de fin: 31 déc. 2013,
There are over three thousand spot welds in a typical car. When a car is repaired the spot welding parameters can be different as the mass production machinery used in manufacture can no longer be used. The repairer often is not an expert at inspecting spot welds. Assured reliability of the spot weld is paramount, since the integrity of the spot welds is vital to the crash performance of a car and ...
Voir le projet
9
Participants partenaires
TERMINÉ
Laser-guided inspection robot for the Non-Destructive Testing of thin steel gauge welds in the shipping industry (X-Scan)
Date du début: 1 oct. 2011, Date de fin: 30 nov. 2013,
Ocean going ships are the most cost effective form of transporting bulk goods around the world. To date, Europe owns nearly 40% of the world’s fleet of ships, which account for 90% of its external trade and 40% of its internal trade. Moreover, in the supply of ship building components and services, the EU is a world leader. As a result, the maritime industry, which includes ship building and ship ...
Voir le projet
8
Participants partenaires
TERMINÉ
DEVELOPMENT OF NOVEL INSPECTION TECHNIQUES FOR TRAIN AXLES (AxleInspect)
Date du début: 1 nov. 2011, Date de fin: 31 oct. 2013,
The structural integrity of wheel sets used in rolling stock is of great importance to the rail industry and its customers. A number of rail accidents have been directly related to the failure of train axles, leading to increased demands for their inspection and maintenance. Visual inspection and Magnetic Particle Inspection are the current standard practices used for manual non-destructive testin ...
Voir le projet
8
Participants partenaires
TERMINÉ
A wireless network with autonomously powered and active long range acoustic nodes for total structural health monitoring of bridges (WI-HEALTH)
Date du début: 1 oct. 2011, Date de fin: 30 sept. 2013,
Wireless sensor networks have been identified as a research priority by the European Technology Platform on Smart Systems Integration (EPoSS). Recognising this, the SME's in this Project are seeking EC funding to develop a prototype wide-area wireless sensor network with autonomous nodes containing non-destructive (NDT) sensors, for structural health monitoring (SHM) of large structures, specifica ...
Voir le projet
9
Participants partenaires
TERMINÉ
Long range ultrasonic system for continuous in service inspection and structural health monitoring of high temperature superheated steam pipes in power generation plant with 100% coverage (HotScan)
Date du début: 1 févr. 2011, Date de fin: 31 juil. 2013,
A typical electricity power plant of 500MW (both nuclear and conventional) has up to 4 kilometres of pipe work carrying superheated steam at pressures of up to 400 bars and temperatures up to 580 oC. The extreme pressures produce hoop stresses in a pipe causing the pipe welds to creep continuously in time until weld creep cracks are generated which, if undiscovered, may grow until the pipe rupture ...
Voir le projet
8
Participants partenaires
TERMINÉ
Development and Validation of an Automated Non-destructive Evaluation (NDE) Approach for Testing Welded Joints in Plastic Pipes (TestPEP)
Date du début: 1 févr. 2010, Date de fin: 30 avr. 2013,
Plastics pipes offer significant advantages over other materials such as cast iron, steel, copper and concrete, for the transportation of fluids such as natural gas, water, effluent and corrosive liquids. They do not corrode; have a longer predicted service life, leading to less frequent replacement; they are less expensive to install due to their light weight and flexibility; and have significant ...
Voir le projet
15
Participants partenaires
TERMINÉ
Long range inspection and condition monitoring of rails using guided waves (Monitorail)
Date du début: 1 févr. 2011, Date de fin: 31 janv. 2013,
The objective of MONITORAIL is to develop a cost effective long range ultrasonic inspection and also a wireless condition monitoring system in order to improve and better maintain the European railway system for better efficiency and safety. This will be carried out through the development of the Long Range Ultrasonic technology which has a certain number of advantages: sufficient inspection time, ...
Voir le projet
10
Participants partenaires
TERMINÉ
An ICT Enabled Approach to Optimising the Reliability of Manual Ultrasonic Non-destructive Testing (ICARUS)
Date du début: 1 janv. 2011, Date de fin: 31 déc. 2012,
"Manual Ultrasonic Non Destructive Testing is a long established and extensively adopted inspection technology, embedded in and vital to the integrity and performance management of capital assets in safety critical industries including aerospace, chemical processing and power generation. Of all available volumetric inspection systems, ultrasonic testing is recognised as providing the highest sensi ...
Voir le projet
10
Participants partenaires
TERMINÉ
Autonomous Robot for an Automatic Inspection of Nozzle Welds in Nuclear Environment (NozzleInspect)
Date du début: 1 juil. 2009, Date de fin: 30 sept. 2011,
Regular in-service inspection is important to verify the integrity of welded nozzle sections in nuclear and other safety critical facilities. Nozzle sections made from austenitic steel can be susceptible to rapid crack growth due to thermal fatigue and stress corrosion. Early detection of cracks is therefore essential to ensure the continued safe operation of the facility in question. In order to ...
Voir le projet
8
Participants partenaires
TERMINÉ
Development of New and Novel Quality Control System for the Inspection of Titanium Components in Safety Critical Applications in the Aerospace Industry (Qualiti)
Date du début: 1 oct. 2008, Date de fin: 28 févr. 2011,
European SMEs in the field of none destructive testing do not have the technological capability to reliably test titanium materials, and as a result risk are losing competitiveness in this €600million global market. Titanium is important material in the manufacture of new components in many important industries, including aerospace. An automated phased array, ultrasonic NDT method supported wit ...
Voir le projet
6
Participants partenaires
TERMINÉ
"Development of an ultrasonic technique, sensors and systems for the volumetric examination of alumino-thermic rail welds" (RAILECT)
Date du début: 1 sept. 2008, Date de fin: 31 déc. 2010,
"In 2004 an estimated 5 billion passenger journeys will be made in the UK, France and Germany and the market in the three countries is worth approximately €40 billion. [Ref. 1] . Based on the extrapolation of data relating to the UK, French and German railways [Ref 1], the 500,000 kms of rail [Ref. 2] on the European rail network has an average estimated 5000 rail breaks annually with about 1500 d ...
Voir le projet
10
Participants partenaires
TERMINÉ
Development of novel Non Destructive Testing (NDT) techniques and autonomous robots to be deployed by Remote Operating Vehicles (ROVs) for the sub-sea inspection of offshore structure welds (SubCTest)
Date du début: 1 sept. 2008, Date de fin: 31 oct. 2010,
The project objective is to develop sub-sea NDT techniques to be applied by novel robots developed to be deployed to sub-sea structures by a Remote Operating Vehicle (ROV) for the examination of critical welds and lengths of sub-sea pipelines. The NDT techniques, systems and sensors to be developed for sub-sea ROV deployed applications include: 1. Phased Array Automated Ultrasonic Testing (PA - AU ...
Voir le projet
9
Participants partenaires
TERMINÉ
European Ambient Assisted Living Innovation Alliance (AALIANCE)
Date du début: 1 janv. 2008, Date de fin: 31 mars 2010,
Subject of the Coordination Action AALIANCE will be Ambient Assisted Living (AAL) solutions based on advanced ICT technologies for the areas of aging at work, aging at homed and aging in the society. AALIANCE will- provide a framework for stakeholders, led by industry, to define research and development priorities, timeframes and action plans on strategically important issues in the field of Ambie ...
Voir le projet