Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Overcoming the Limits of Diffraction with Superresolution Lighting on a Chip (ChipScope)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

The physical laws of diffraction generally limit the spatial resolution of optical systems, being about 200 nm for light in the visible range. Within ChipScope we want to overcome this limit by developing the scientific and technological basis for a completely new approach to optical superresolution, based on semiconductor nano Light Emitting Diode (nanoLED) arrays with individual pixel operation. ...
Voir le projet

 7

 TERMINÉ 

Increased Safety and robust certification for ditching of aircrafts and helicopters (SARAH)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

SARAH is concerned with establishing novel holistic, simulation-based approaches to the analysis of aircraft ditching. It is build up from a consortium of experts from OEM industries, experienced suppliers of simulation technologies, established research institutions and representatives of the certification authorities. Results of SARAH are expected to support a performance-based regulation and ce ...
Voir le projet

 12

 TERMINÉ 

Cognitive Interaction in Motion (CogIMon)

Date du début: 1 févr. 2015, Date de fin: 31 janv. 2019,

Compliant control in humans is exploited in a variety of sophisticated skills. These include solitary actions such as soft catching, sliding, pushing large objects as well as joint actions performed in teams such as mainpulation of large scale objects or mutual adaptation through phyiscal coupling for learning, in walking or in execution of joint tasks. We refer to this advanced ability of organiz ...
Voir le projet

 10

 TERMINÉ 

Revolutionary Design of Spacecraft through Holistic Integration of Future Technologies (ReDSHIFT)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2018,

ReDSHIFT will address barriers to compliance for spacecraft manufacturers and operators presented now and in the future by requirements and technologies for de-orbiting and disposal of space objects. This will be achieved through a holistic approach that considers from the outset opposing and challenging constraints for the safety of the human population when these objects re-enter the atmosphere, ...
Voir le projet

 13

 TERMINÉ 

BIOCASCADES- Sustainable and Scalable Biocatalytic Cascade Reactions Training Network (BIOCASCADES)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2018,

In BIOCASCADES, nine early-stage researchers (ESRs) will investigate the development of sustainable (chemo)enzymatic cascade reactions under the ‘green chemistry’ philosophy. The proposed BIOCASCADES project combines different techniques such as compartmentalization, protein engineering and reaction engineering in order to develop commercially viable and environmentally benign one pot reactions. B ...
Voir le projet

 12

 TERMINÉ 

Secure Enclaves for REactive Cloud Applications (SERECA)

Date du début: 1 mars 2015, Date de fin: 28 févr. 2018,

Cloud security is of immediate concern to organisations that must comply with strict confidentiality and integrity policies. More broadly, security has emerged as a commercial imperative for cloud computing across a wide range of markets. The lack of adequate security guarantees is becoming the primary barrier to the broad adoption of cloud computing.The Secure Enclaves for REactive Cloud Applicat ...
Voir le projet

 9

 TERMINÉ 

European network for innovative microbioreactor applications in bioprocess development (EUROMBR)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2017,

"The objective is to deliver a trans-European network of industrially oriented specialists fully trained in the development and application of microbioreactor (MBR) technology to support development of innovative bio-based manufacturing processes. The specialistis will be trained by leaders in the field and with state of the art equipment and methodologies. MBRs are a promising tool for screening ...
Voir le projet

 13

 TERMINÉ 

Avionics Systems Hosted on a distributed modular electronics Large scale dEmonstrator for multiple tYpe of aircraft (ASHLEY)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

In search for a more competitive, multiple types of aircrafts, IMA based, avionics platform solution, the European aerospace industry has recently initiated the IMA2G paradigm thanks to the EC funded SCARLETT project.This latter successfully validated a first underlying set of IMA2G concepts (Separate Core Processing resources from I/O resources, introduce resource segments typology of electronics ...
Voir le projet

 39

 TERMINÉ 

Sensing and integration of signals governing cell polarity and tropism in fungi (FUNGIBRAIN)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

"Cell polarity and directed growth (tropism) are fundamental biological processes. Most fungi are dependent on these processes because they grow as polarised filaments called hyphae, whose growth and developmentare governed by physical and chemical cues from the environment. Such cues include surface-contact, light, nutrients, mating partners, host organisms, or ‘self’ hyphae from within the fung ...
Voir le projet

 13

 TERMINÉ 

Embedded Multi-Core Systems for Mixed Criticality Applications in Dynamic and Changeable Real-Time Environments (EMC2)

Date du début: 1 avr. 2014, Date de fin: 30 juin 2017,

Embedded systems are the key innovation driver to improve almost all mechatronic products with cheaper and even new functionalities. Furthermore, they strongly support today's information society as inter-system communication enabler.Consequently boundaries of application domains are alleviated and ad-hoc connections and interoperability play an increasing role. At the same time, multi-core and ma ...
Voir le projet

 101

 TERMINÉ 

Low Emissions Core-Engine Technologies (LEMCOTEC)

Date du début: 1 oct. 2011, Date de fin: 30 juin 2017,

The main objective of the LEMCOTEC project will be the improvement of core-engine thermal efficiency by increasing the overall pressure ratio (OPR) to up to 70 leading to a further reduction of CO2. Since NOx increases with OPR, combustion technologies have to be further developed, at the same time, to at least compensate for this effect. The project will attain and exceed the ACARE targets for 20 ...
Voir le projet

 39

 TERMINÉ 

Reconfigurable ROS-based Resilient Reasoning Robotic Cooperating Systems (R5-COP)

Date du début: 1 févr. 2014, Date de fin: 31 mars 2017,

European manufacturing industry faces increasing product variances resulting as a consequence of frequent innovation, short product lifecycles, small series production, and shrinking production cycles. At the same time, production cost must be continuously reduced.Agile, transformable and re-usable automation and robotics is be a key enabler to manage those trends. However, few robotic components ...
Voir le projet

 34

 TERMINÉ 

MOBILISING THE POTENTIAL OF ACTIVE AGEING IN EUROPE (MOPACT)

Date du début: 1 mars 2013, Date de fin: 28 févr. 2017,

The starting point for MOPACT is the ambitious goals set by Horizon 2020 and the European Innovation Partnership Pilot Project on Active and Healthy Ageing (EIPAHA). Our response is ambitious too: we aim to provide the research and practical evidence upon which Europe can make longevity an asset for social and economic development. MOPACT will create a high quality, multi-disciplinary critical mas ...
Voir le projet

 32

 TERMINÉ 

High Altitude Ice Crystals (HAIC)

Date du début: 1 août 2012, Date de fin: 31 janv. 2017,

Commercial aircraft have been experiencing in-service events while flying in the vicinity of deep convective clouds since at least the early 1990s. Heated probes and engines are the areas of air-craft most prone to mixed phase and glaciated icing threat. In anticipation of regulation changes regarding mixed phase and glaciated icing conditions, the HAIC project will provide the necessary Acceptabl ...
Voir le projet

 40

 TERMINÉ 

More Affordable Aircraft structure through eXtended, Integrated, and Mature nUmerical Sizing (MAAXIMUS)

Date du début: 1 avr. 2008, Date de fin: 30 sept. 2016,

Even though composite materials are more and more used in modern airframes, many significant improvements are still achievable. Firstly, the substitution of the assembly of many small composite parts by a single one-shot large part provides additional weight reduction. Secondly, the final assembly line process must be adapted to composite properties (lack of ductility, stiffness). Thirdly, if the ...
Voir le projet

 60

 TERMINÉ 

Protein Binders for Characterisation of Human Proteome Function: Generation, Validation, Application (AFFINOMICS)

Date du début: 1 avr. 2010, Date de fin: 31 mars 2015,

The Affinomics programme aims to leverage existing efforts in Europe to generate large-scale resources of validated protein-binding molecules (‘binders’) as affinity reagents for characterisation of the human proteome and to apply them in comprehensive structural and functional analyses of protein expression, interactions and complexes. Proteome targets will be focused on five categories of inter- ...
Voir le projet

 20

 TERMINÉ 

Source of Electron Entanglement in Nano Devices (SE2ND)

Date du début: 1 août 2011, Date de fin: 31 janv. 2015,

SE2ND is a joint experimental and theoretical effort. SE2ND strives to develop a highly efficient and continuous solid-state source of spatially separated spin-entangled electrons. A source of this kind, integrated with other electronic elements, will be of great importance in future quantum processors, where they provide, for example, entanglement distribution required to synchronize quantum circ ...
Voir le projet

 10

 TERMINÉ 

Numerical simulation in technical sciences (NUMSIM)

Date du début: 1 nov. 2010, Date de fin: 31 oct. 2014,

"Computer simulation plays an increasing role in technical sciences and allows the detailed investigation of physical phenomena way beyond what can be achieved in the laboratory. It is used extensively in the industry for example for rapid prototyping or for reducing the risk in underground construction. The aim of the project is to bring together groups of scientists in Latin America and Europe t ...
Voir le projet

 5

 TERMINÉ 

Eco Manufactured transportation means from Clean and Competitive Factory (EMC2-Factory)

Date du début: 1 oct. 2011, Date de fin: 30 sept. 2014,

According to the International Energy Agency, the Manufacturing sector is at worldwide level responsible for approximately 37% of primary energy consumption being, in most of the developed countries, it is the largest energy consumer and CO2 producer. In this new competitive scenario, European manufacturers have to rethink the current ideas of manufacturing and factories, to be prepared for the n ...
Voir le projet

 19

 TERMINÉ 

NANOTECHNOLOGICAL TOOLKITS FOR MULTI-MODAL DISEASE DIAGNOSTICS AND TREATMENT MONITORING (NAMDIATREAM)

Date du début: 1 juil. 2010, Date de fin: 30 juin 2014,

NAMDIATREAM will develop a cutting edge nanotechnology-based toolkit for multi-modal detection of biomarkers of most common cancer types and cancer metastases, permitting identification of cells indicative of early disease onset in a high-specificity and throughput format in clinical, laboratory and point-of-care devices. The project is built on the innovative concepts of super-sensitive and highl ...
Voir le projet

 24

 TERMINÉ 

Structural designs and tests for integration of active flow control concepts on a trailing edge high lift device (AFCIN)

Date du début: 1 avr. 2011, Date de fin: 30 juin 2014,

"This proposal covers all actions from the university side required in the call JTI-CS-2010-1-SFWA-01-020 for the development and testing of two designs of an integration of active flow control concepts on a trailing edge of high lift devices, namely:• the design, including an optimization of the structure• the manufacturing of coupon specimens and a mock-up• the structural testing of the specimen ...
Voir le projet

 2

 TERMINÉ 

EM safety and Hazards Mitigation by proper EV design (EM-Safety)

Date du début: 1 mai 2011, Date de fin: 30 avr. 2014,

The project aims at increasing the public confidence in the safety regarding electromagneticfields (EMF) in the fully electric vehicles (FEV).Public expectations to move towards the electrification of road transport are driven by a multitudeof factors and concerns including: climate change, primary energy dependence and public healthas well as cost and scarcity of raw materials. Road transport rem ...
Voir le projet

 11

 TERMINÉ 

PARticle Systems: Training on DEM simulation for industrial and scientific applications (PARDEM)

Date du début: 1 nov. 2009, Date de fin: 31 oct. 2013,

"The overarching aim of the PARDEM project is to provide high quality training to a group of young researchers to work within and to further develop the multidisciplinary field of DEM computational simulation of granular processes. Granular materials are estimated to constitute over 75% of all raw material feedstock to industry. They also present many challenges for innovation and fundamental scie ...
Voir le projet

 12

 TERMINÉ 

Trustworthy Clouds – Privacy and Resilience for Internet-scale Critical Infrastructure (TCLOUDS)

Date du début: 1 oct. 2010, Date de fin: 30 sept. 2013,

Protecting critical infrastructures providing communications, energy, or healthcare presents increasing ICT challenges as ICT itself has become vital to them. Internet-scale ICT infrastructures ("infrastructure clouds") promise scalable virtualised computing, network, and storage resources over the Internet. They provide scalability and cost-efficiency but pose significant new privacy and resilien ...
Voir le projet

 16

 TERMINÉ 

Towards Automated Interactions between the Internet and the Carrier-Grade Management Ecosystems (ONE)

Date du début: 1 sept. 2010, Date de fin: 31 août 2013,

There is a wide consensus among telecom vendors and operators that the next decade will see a mélange of evolving Internet architectures embedded into high-bandwidth technologies and carrier-grade systems for control and management. The combined Internet Protocol (IP) and Ethernet-based optical transport solutions are expected to drastically lower capital and operational expenses and improve overa ...
Voir le projet

 6

 TERMINÉ 

Early Recognition, Monitoring and Integrated Management of Emerging, New Technology Related Risks (iNTeg-Risk)

Date du début: 1 déc. 2008, Date de fin: 31 mai 2013,

iNTeg-Risk is a large-scale integrating project aimed at improving the management of emerging risks in the innovative industry. This will be achieved by building a new risk management paradigm for emerging risks, which is a set of principles supported by a common language, commonly agreed tools & methods and Key Performance Indicators integrated into a single framework. As main impact, it will red ...
Voir le projet

 67

 TERMINÉ 

TEstbed for Future Internet Services (TEFIS)

Date du début: 1 juin 2010, Date de fin: 28 févr. 2013,

The flourishing of user driven demand, the heterogeneity of networks, the multiplicity of new devices, all mean that the Internet as we know it is reaching a saturation point. One of the main challenges of Future Internet research is to address the surge in complexity that service and network developers are facing.Building on top of the on-going actions to support large-scale experimentation for F ...
Voir le projet

 19

 TERMINÉ 

Re-road – End of life strategies of asphalt pavements (Re-road)

Date du début: 1 janv. 2009, Date de fin: 31 déc. 2012,

The majority of the European roads are paved with asphalt material. The dismantling and end of life strategies for these pavements are very divergent among the EU member states and the associated countries. In general the share of recycling the reclaimed asphalt in new asphalt courses is rather lower than it could be technically. The Re-road project aims to address these problems with a holistic ...
Voir le projet

 14

 TERMINÉ 

Smart Nanostructured Semiconductors for Energy-Saving Light Solutions (SMASH)

Date du début: 1 sept. 2009, Date de fin: 31 août 2012,

Solid state light sources based on compound semiconductors are opening a new era in general lighting and will contribute significantly to a sustainable energy saving. For a successful and broad penetration of LEDs into the general lighting market two key factors are required: high efficiency and low cost. Two new disruptive technologies based on nanostructured semiconductors are proposed to addres ...
Voir le projet

 14

 TERMINÉ 

European Coordination Action for Aircraft Wake Turbulence (WakeNet3-Europe)

Date du début: 1 avr. 2008, Date de fin: 31 juil. 2012,

The Coordination Action WakeNet3-Europe will promote multidisciplinary exchange between research and operational specialists in the field of wake vortex turbulence. It will enable to develop a shared view on how to address capacity-related issues caused by wake turbulence. It continues the Thematic Networks WakeNet and WakeNet2-Europe. Safe separations prescribed to avoid potential hazards by enco ...
Voir le projet

 13

 TERMINÉ 

Built Environment Sustainability and Technology in Energy (BEST Energy)

Date du début: 1 févr. 2009, Date de fin: 30 avr. 2012,

The main objective of this project is to improve the energy efficiency in public buildings and street public lighting, by the ICT-based centralized monitoring and management of the energy consumption and production, and to provide decision makers with the necessary tools to be able to plan energy saving measures.To achieve this objective BEST Energy project will implement and validate four pilots, ...
Voir le projet

 13

 TERMINÉ 

Integrated European Industrial Risk Reduction System (IRIS)

Date du début: 1 oct. 2008, Date de fin: 31 mars 2012,

Current practices in risk assessment and management for industrial systems are characterized by its methodical diversity and fragmented approaches. In retrospect these risk and safety paradigms resulted from diverse industries driven and limited by available knowledge and technologies. A change based on industry driven R&D work is needed. At present the European Industry recognised their obligatio ...
Voir le projet

 37

 TERMINÉ 

ArtistDesign – Design for Embedded Systems (ArtistDesign)

Date du début: 1 janv. 2008, Date de fin: 31 mars 2012,

The ArtistDesign NoE is the visible result of the ongoing integration of a community, that emerged through the Artist FP5 Accompanying Measure and that was organised through the Artist2 FP6 NoE.The central objective for ArtistDesign is to build on existing structures and links forged in Artist2, to become a virtual Center of Excellence in Embedded Systems Design. This will be mainly achieved throu ...
Voir le projet

 38

 TERMINÉ 

Advanced affinity tools and technologies for high throughput studies of the human proteome (AffinityProteome)

Date du début: 1 mars 2009, Date de fin: 29 févr. 2012,

High specificity affinity reagents (‘binders’) are essential probes for proteome research, enabling the detection and localisation of multiple proteins in tissues and fluids in health and disease, through the application of binder-based technologies (affinity proteomics). This proposal links the high throughput production of quality-controlled, recombinant binding molecules of different types (ant ...
Voir le projet

 10

 TERMINÉ 

Hydropower converters with very low head differences (HYLOW)

Date du début: 1 mars 2008, Date de fin: 29 févr. 2012,

"Small hydropower with very low head or pressure differences below 2.5 m and hydraulic power ratings of 50 to 1000 kW is a significant renewable resource, with an estimated unused potential in rivers alone of e.g. 600 to 1000 MW in the UK and more than 500 MW in Germany. The economically and ecologically efficient utilisation of this hydropower bracket still constitutes an unsolved problem since c ...
Voir le projet

 11

 TERMINÉ 

Performance Control in Wireless Sensor Networks (GINSENG)

Date du début: 1 sept. 2008, Date de fin: 29 févr. 2012,

Research on wireless sensor networks (WSNs) is at an early stage and, to date, practical experience with deployment has been very limited. The focus of past research has been on fundamental design issues, especially on optimizing the use of scarce energy resources in battery-powered devices. Published studies show relative comparisons between alternative approaches, but there has been a dearth of ...
Voir le projet

 10

 TERMINÉ 

Correlated Noise Errors in Quantum Information Processing (CORNER)

Date du début: 1 juil. 2008, Date de fin: 31 janv. 2012,

Any form of manipulation of quantum information (QI), be it storage or transfer, may be represented as a quantum channel, i.e. a map transforming the input state of the sender into the receiver's output state. Given the extreme sensitivity of QI to noise, it is crucial to study the impact of incoherent effects on QI processing and communication if technological applications are to become a reality ...
Voir le projet

 13

 TERMINÉ 

DISmantling and RECycling Techniques for road MATerials - Sharing knowledge and practices (DIRECT_MAT)

Date du début: 1 janv. 2009, Date de fin: 31 déc. 2011,

"The DIREC_MAT project objective is to share, at a European scale, knowledge and practices on recycling road and road-related waste in the aim of ensuring an environmentally-friendly and sustainable end-of-life for road infrastructure. Road material recycling processes have previously been studied in national and European research projects and have led to various levels of practical implementation ...
Voir le projet

 20

 TERMINÉ 

Cooperative Hybrid Objects in SEnsor Networks (CHOSEN)

Date du début: 1 juin 2008, Date de fin: 30 nov. 2011,

CHOSeN will develop appropriate technology, including advanced configurable RF and digital baseband transceiver hardware, networking protocols with scalable Quality of Service in respect of transmission speed, robustness, security, and low-power support, and a generic collaboration middleware that abstracts from the diversity and heterogeneity provided by the layers below, and it will thereby impr ...
Voir le projet

 11

 TERMINÉ 

Gigascale Oriented Solid State flAsh Memory for EuRope (GOSSAMER)

Date du début: 1 janv. 2008, Date de fin: 30 juin 2011,

Description GOSSAMER successfully developed a fully integrated Flash NAND technology based on the TANOS concept, investigating a large number of architecture and material options. The project aimed at the development of the technology for very high density Non Volatile Memories for mass storage ap ...
Voir le projet

 21