Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Federation for FIRE Plus (Fed4FIREplus)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2021,

The Fed4FIRE+ project has the objective to run and further improve Fed4FIRE’s “best-in-town” federation of experimentation facilities for the Future Internet Research and Experimentation initiative. Federating a heterogeneous set of facilities covering technologies ranging from wireless, wired, cloud services and open flow, and making them accessible through common frameworks and tools suddenly op ...
Voir le projet

 24

 TERMINÉ 

Smart mitigation of flow-induced acoustic radiation and transmission for reduced aircraft, surface transport, workplaces and wind energy noise (SmartAnswer)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

A step change in our noise mitigation strategies is required in order to meet the environmental targets set for a number of sectors of activity affecting people through noise exposure. Besides being a hindrance to our daily life and subject to regulations, noise emission is also a competitive issue in today’s global market. To address these issues, new technologies have been emerging recently, bas ...
Voir le projet

 13

 TERMINÉ 

Infrastructure and integrated tools for personalized learning of reading skill (iRead)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

The overarching aim of the iRead project is to develop a software infrastructure of personalised, adaptive technologies and a diverse set of applications for supporting learning and teaching of reading skills. The specific goals of the project proposed are to:1. Develop a scalable, cloud-based software infrastructure of open, interoperable components, including real-time user modelling and domai ...
Voir le projet

 17

 TERMINÉ 

Biowaste derived volatile fatty acid platform for biopolymers, bioactive compounds and chemical building blocks (VOLATILE)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2020,

VOLATILE aims in the development of an innovative Volatile Fatty Acids Platform for the bioconversion of municipal solid bio-waste fraction and sludgy biowaste from other industries. The platform will be integrated in anaerobic digestion. The volatile fatty acids will be recovered continuously using sophisticated membrane technology and will be provided as feedstock / carbon source for value added ...
Voir le projet

 21

 TERMINÉ 

Production of Scandium compounds and Scandium Aluminum alloys from European metallurgical by- products (SCALE)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2020,

Scandium (Sc) is one of the highest valued elements in the periodic table and an element which is usually grouped in REEs as it shares many characteristics with Yttrium. Scandium technological applications are unique, as it is a key component in producing Solid Oxide Fuel Cells (Scandia-Stabilized-Zirconia solid electrolyte layer) or high strength Aluminum alloys used in aerospace and 3D printing ...
Voir le projet

 20

 TERMINÉ 

SmArt BI-directional multi eNergy gAteway (SABINA)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2020,

Flexibility needs to be added to Europe’s power system to accommodate an increasing share of variable power generation from renewable sources. Indeed, service quality issues start to arise on the grid when this share in electricity consumption reaches 10%. To meet the EU’s targets for reduction of greenhouse gas emissions this share should rise to 30% by 2030 and up to 50% by 2050. The cost of thi ...
Voir le projet

 10

 TERMINÉ 

Innovative approaches to turn agricultural waste into ecological and economic assets (NoAW)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,

NoAW : No Agro-Waste.Innovative approaches to turn agricultural waste into ecological and economic assets.Driven by a “near zero-waste” society requirement, the goal of NoAW project is to generate innovative efficient approaches to convert growing agricultural waste issues into eco-efficient bio-based products opportunities with direct benefits for both environment, economy and EU consumer. To ach ...
Voir le projet

 32

 TERMINÉ 

HOLIstic optimisation of SHIP design and operation for life cycle (HOLISHIP)

Date du début: 1 sept. 2016, Date de fin: 31 août 2020,

Most maritime products are typically associated with large investments and are seldom built in large series. Where other modes of transport benefit from the economy of series production, this is not the case for maritime products which are typically designed to refined customer requirements increasingly determined by the need for high efficiency, flexibility and low environmental impact at a compe ...
Voir le projet

 39

 TERMINÉ 

Climate Proofing Urban Municipalities (LIFE UrbanProof)

Date du début: 1 oct. 2016, Date de fin: 31 mai 2020,

...ronment and its citizens have consequences for public health, water availability and quality, energy consumption and essential infrastructure. Although climate change projections have been made at national level for many countries there is not enough information available to assess climate change impacts at local level. This precludes municipalities from developing urban adaptation strategies. ...
Voir le projet

 8

 TERMINÉ 

Scale-up of low-carbon footprint material recovery techniques in existing wastewater treatment plants (SMART-Plant)

Date du début: 1 juin 2016, Date de fin: 31 mai 2020,

SMART-Plant will scale-up in real environment eco-innovative and energy-efficient solutions to renovate existing wastewater treatment plants and close the circular value chain by applying low-carbon techniques to recover materials that are otherwise lost. 7+2 pilot systems will be optimized fore > 2 years in real environment in 5 municipal water treatment plants, inclunding also 2 post-processing ...
Voir le projet

 27

 TERMINÉ 

Partnership for Research in Geopolymer Concretes (PRIGeoC)

Date du début: 1 juin 2016, Date de fin: 31 mai 2020,

Concrete, owing to its availability, easy preparation and fabrication, is the most popular construction material. However, the cement industry is facing unprecedented challenges caused by energy resources and CO2 emissions. Despite the incremental improvements in process efficiency adopted by the cement industry in recent years, OPC production is still responsible for around 6% of all man-made glo ...
Voir le projet

 3

 TERMINÉ 

Modified cost effective fibre based structures with improved multi-functionality and performance (MODCOMP)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2020,

Current technological demands are increasingly stretching the properties of advanced materials to expand their applications to more severe or extreme conditions, whilst simultaneously seeking cost-effective production processes and final products. The aim of this project is to demonstrate the influence of different surface enhancing and modification techniques on CF-based materials for high value ...
Voir le projet

 17

 TERMINÉ 

Transforming Intangible Folkloric Performing Arts into Tangible Choreographic Digital Objects (Terpsichore)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2020,

"Intangible Cultural Heritage (ICH) content means "the practices, representations, expressions, knowledge, skills – as well as the instruments, objects, artefacts and cultural spaces associated therewith". Although, ICH content, especially traditional folklore performing arts, is commonly deemed worthy of preservation by UNESCO (Convention for the Safeguarding of ICH) and the EU Treaty, most of th ...
Voir le projet

 9

 TERMINÉ 

Long Lasting Reinforced Concrete for Energy Infrastructure under Severe Operating Conditions (LORCENIS)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2020,

The main goal of the LORCENIS project is to develop long reinforced concrete for energy infrastructures with lifetime extended up to a 100% under extreme operating conditions. The concept is based on an optimal combination of novel technologies involving customized methodologies for cost-efficient operation. 4 scenarios of severe operating conditions are considered:1. Concrete infrastructure in d ...
Voir le projet

 17

 TERMINÉ 

Green Integrated Structural Elements for Retrofitting and New Construction of Buildings (GREEN INSTRUCT)

Date du début: 1 oct. 2016, Date de fin: 31 mars 2020,

The Green INSTRUCT project will develop a prefabricated modular structural building block that is superior to conventional precast reinforced concrete panels by virtue of its reduced weight, improved acoustic and thermal performance and multiple functionalities. The Green INSTRUCT block consists of over 70% of CDW in weight. The Green INSTRUCT project will: (i) achieve sustainability and cost sav ...
Voir le projet

 15

 TERMINÉ 

Development and application of Novel, Integrated Tools for monitoring and managing Catchments (INTCATCH)

Date du début: 1 juin 2016, Date de fin: 31 janv. 2020,

INTCATCH will instigate a paradigm shift in the monitoring and management of surface water quality that is fit for global waters in the period 2020-2050. INTCATCH will do this by developing efficient, user-friendly water monitoring strategies and systems based on innovative technologies that will provide real time data for important parameters, moving towards SMART Rivers. The business model will ...
Voir le projet

 23

 TERMINÉ 

Optimization Driven Architectural Design of Structures (OptArch)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2020,

...ops, seminars and long-term visits will be organized at the coordinating and partner institutions. The results will be published in scientific journals, professional magazines and presented in international conferences."
Voir le projet

 12

 TERMINÉ 

PAYT - Tool to Reduce Waste in South Europe (LIFE PAYT)

Date du début: 1 sept. 2016, Date de fin: 31 déc. 2019,

Background Municipal waste management practices are failing to achieve high recycling rates in several southern European countries, making it difficult to achieve EU targets. The Waste Framework Directive requires Member States to increase the re-use and recycling of waste materials, such as paper, metal, plastic and glass from households, to a minimum of ...
Voir le projet

 8

 TERMINÉ 

Low energy treatment technology for leachate valorisation (LIFE LEACHLESS)

Date du début: 1 oct. 2016, Date de fin: 31 déc. 2019,

...t is completed; Authorities able to increase the competitiveness and improve environmental legislation through better management of leachate; and Dissemination of the project results at national and international level through the dissemination plan and networking activities.
Voir le projet

 4

 TERMINÉ 

Achieving Complex Collaborative Missions via Decentralized Control and Coordination of Interacting Robots (Co4Robots)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

Imagine a scenario where multiple robots have been deployed to provide services such as object handling/transportation, or pickup and delivery operations. In such a context, different robots with varying capabilities must be coordinated in order to achieve various multi-tasking procedures. Thus, the effective supervision and coordination of the overall heterogeneous system mandates a decentralized ...
Voir le projet

 7

 TERMINÉ 

Novel Processes and Equipment in Composite Repair Technology (NEWCORT)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

NEWCORT will develop and validate novel processes and equipment for the repair of composite airframes. Three key stages in the bonded composite repair procedure were identified, namely material removal & surface preparation, heating for polymerization of patch and positive pressure application for improved compaction of patch layers. In all three stages novel processes will be developed, either th ...
Voir le projet

 5

 TERMINÉ 

Up to University - Bridging the gap between schools and universities through informal education (Up2U)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

...ble after the lifetime of the project. Therefore, the project is going to develop business plans and investigate appropriate business models using the expertise of the Small Medium Enterprise and National Research and Education Network partners and their contacts with third-party business actors. Our plan is to make it easy for new schools to join the Up2U infrastructure and ecosystem that will fo ...
Voir le projet

 18

 TERMINÉ 

Developing advanced Engine Multi-disciplinary Optimization Simulations (DEMOS) (DEMOS)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

The “Innovative Aircraft Architecture” technology stream of the Clean Sky 2 Airframe ITD focuses on advanced power-plant solutions (such as CROR and UHBR) that are able to deliver a significant gain in aircraft performance. Project DEMOS will develop advanced predictive modelling and simulation capabilities for engine design space exploration and performance optimization of such novel propulsion s ...
Voir le projet

 3

 TERMINÉ 

Semantic EO Data Web Alert and Retrieval Framework (SEO-DWARF)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

Technological advances in remote sensing have increased the availability of satellite images with different spatiotemporal and spectral characteristics.There is difficulty for retrieving the most appropriate data for each user's needs.One key challenge is to connect the quantitative information of the EO images with the qualitative (high-level user queries) and be able to mine these connections in ...
Voir le projet

 10

 TERMINÉ 

OpenRiskNet: Open e-Infrastructure to Support Data Sharing, Knowledge Integration and in silico Analysis and Modelling in Risk Assessment (OpenRiskNet)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2019,

Toxicology and risk assessment are undergoing a paradigm shift, from a phenomenological to a mechanistic discipline based on in vitro and in silico approaches that represent an important alternative to classical animal testing applied to the evaluation of chronic and systemic toxicity risks. Large databases and highly sophisticated methods, algorithms and tools are available for different tasks su ...
Voir le projet

 14

 TERMINÉ 

Moving towards Life Cycle Thinking by integrating Advanced Waste Management Systems (Waste4Think)

Date du début: 1 juin 2016, Date de fin: 30 nov. 2019,

The main objective of this project is to move forward the current waste management practices into a circular economy motto, demonstrating the value of integrating and validating a set of 20 eco-innovative solutions that cover all the waste value chain. The benefits of these solutions will be enhanced by a holistic waste data management methodology, and will be demonstrated in 4 complementary urban ...
Voir le projet

 19

 TERMINÉ 

High sensitivity, portable photonic device for pervasive water quality analysis (WaterSpy)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,

Pervasive and on-line water quality monitoring data is critical for detecting environmental pollution. However, it’s not easy to gather such data, at least not for all contaminants. Currently, water utilities rely heavily on frequent sampling and laboratory analysis in order to acquire this information.For this situation to be improved, portable and high-performance devices for pervasive water qua ...
Voir le projet

 9

 TERMINÉ 

High Performance Laser-based Additive Manufacturing (HIPERLAM)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,

HIPERLAM is an SME driven Research and Innovation Action (RIA) well-aligned to the Factories of the Future (FoF) Initiative with a strong emphasis upon demonstrating superior cost and speed performance in end-to-end processes featuring laser-based additive manufacturing in two key applications requiring high resolution printed conductive metallic lines, namely laser printed RFID antenna and laser ...
Voir le projet

 8

 TERMINÉ 

Highly-efficient biomass CHP plants by handling ash-related problems (Biofficiency)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,

Medium- to large-scale bioenergy utilisation for electricity and combined industrial or district heating is predicted to increase by 160% in 2020 compared to 2010, while carbon emission quotas are becoming stricter. Finding new ways to efficiently utilise cheap and currently unused feedstocks are necessary in order to meet these challenges.Within the project Biofficiency we will investigate how to ...
Voir le projet

 11

 TERMINÉ 

Boosting Engagement of Serbian Universities in Open Science

Date du début: 15 oct. 2016, Date de fin: 14 oct. 2019,

...of view. The main aim of the Project is to foster, standardize, and coordinate the implementation of open science principles at Serbian universities. The Project objective is threefold: 1. to advance national and institutional guidelines, policies, and incentives related to the open science, 2. to establish digital repositories at all Serbian universities and to foster their infrastructural develo ...
Voir le projet

 11

 TERMINÉ 

Development of novel, high Performance hybrid TWV/GPF Automotive afteR treatment systems by raTIonAL design: substitution of PGMs and Rare earth materials (PARTIAL-PGMs)

Date du début: 1 avr. 2016, Date de fin: 30 sept. 2019,

To date, three way catalytic converters (TWCs) have been established as the most effective engine exhaust after-treatment system. However, TWCs not only fail to address the issue of particulate matter (PM) emissions but are also the main industrial consumer of Critical Raw Materials (CRMs) mainly Platinum Group Metals (PGMs) and Rare Earth elements (REEs), with the automotive industry accounting f ...
Voir le projet

 14

 TERMINÉ 

Innovating dialogue and problems appraisal for a safer Africa (SaferAfrica)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

...ominent institutions like EC, the African Union Commission, Financial Institutions, Regional Economic Communities (UN). The technical level will involve government and research institutions, international and stakeholders organizations (e.g. NGOs), with a fair balance between African and EU partners, even for what concerns responsibilities (e.g. Euro-African work package co-leadership). The Dialog ...
Voir le projet

 16

 TERMINÉ 

Empowering spatial thinking of students with visual impairment

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

...s, as well as teachers, teachers’ trainers, and stuff involved in their education. Six partners from 4 EU countries, (Greece, France, Romania and Luxemburg), i.e., 2 from research and technology (National Technical Univ. of Athens GR, Inria Bordeaux Sud Ouest FR), 2 special schools/educational institutions (Athens School for the Blind GR, Liceul Special pentru Deficienti de Vedere RO), one teacher ...
Voir le projet

 6

 TERMINÉ 

Europe in Crisis

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

...students in gameful soft skills learning activities showing them the way to responsible citizenship in Europe and raising their awareness of societal matters at the school, local, regional, national and European level. Through the active involvement of teachers and students in all participating countries, the project aims to evaluate the effectiveness of the tools and of the training and learning ...
Voir le projet

 5

 TERMINÉ 

Technologies for Active Vibration and Acoustic Comfort (TAVAC)

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

In aircraft cabin environments, vibrations and noise co-exist affecting the passenger comfort, quality of flight, but also aircraft efficiency. To progress on airframe and engine efficiency while supporting the high level of customer comfort requested, the faced challenges are to develop and integrate into the airframe and cabin new technologies of active noise and vibration reduction, without pen ...
Voir le projet

 3

 TERMINÉ 

Ship Lifecycle Software Solutions (SHIPLYS)

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

SHIPLYS has been specified as necessary by our architect, shipbuilder and shipowner members, who, in order to survive in the world market, need to improve their capability to reduce the cycle time and costs of design and production, to be able to reliably produce better ship concepts through virtual prototyping and to meet the increasing requirements for LCCA (Life Cycle Cost Analysis), environmen ...
Voir le projet

 12

 TERMINÉ 

INTEGRATED AND ADAPTIVE RESPONSES TO TOXIC EMERGENCIES FOR RAPID TRIAGE: ENGINEERING THE ROADMAP FROM CASUALTY TO PATIENT TO SURVIVOR. (TOXI-triage)

Date du début: 1 sept. 2015, Date de fin: 31 août 2019,

The seven specific objectives of TOXI-triage address the operational; technological; ethical and societal dimensions of CBRN response and recovery, and importantly the economic base from which sustainable CBRN and multi-use systems are derived.19 partners in 4 Task forces will deliver 9 Work Packages (WPs) that address: end user specifications; Design and delivery; Test and Validation; and, Impact ...
Voir le projet

 19

 TERMINÉ 

European Network of Research Ethics and Research Integrity (ENERI) (ENERI)

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

The “European Network of Research Ethics and Research Integrity” (ENERI) establishes an operable platform of actors in the fields of research ethics and research integrity.The reliability and credibility of research and science do not depend only on its excellence and productivity but also on the players’ awareness of highest standards of ethics in research and commitment to a responsible conduct ...
Voir le projet

 11

 TERMINÉ 

Low Cost Materials Processing Technologies for Mass Production of Lightweight Vehicles (LoCoMaTech)

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

The overall aim of LoCoMaTech is, in the first place, to enable the novel HFQ® process, (patented by ICL) in its latest most advanced form, which includes 10 recently patented refining technologies (TRL4), to be used for the manufacture of lightweight, high strength body and chassis structures and components for low-cost vehicles, by establishing a prototype, full scale pilot production line (TRL6 ...
Voir le projet

 20

 TERMINÉ 

BigDataOcean - Exploiting Ocean's of Data for Maritime Applications (BigDataOcean)

Date du début: 1 janv. 2017, Date de fin: 30 juin 2019,

The main objective of BigDataOcean is to enable maritime big data scenarios for EU-based companies, organisations and scientists, through a multi-segment platform that will combine data of different velocity, variety and volume under an inter-linked, trusted, multilingual engine to produce a big-data repository of value and veracity back to the participants and local communities.BigDataOcean aims ...
Voir le projet

 10