Rechercher des projets européens

17 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Cost effective lignin-based carbon fibres for innovative light-weight applications (GreenLight)

Date du début: 1 juil. 2015, Date de fin: 30 juin 2019,

The overall objectives are to demonstrate a new biobased, renewable and economically viable carbon fibre (CF) precursor – lignin – produced in Europe with European raw material and to develop conditions for its processing into CF and structural CF composites. The target is a cost-effective biobased CF for use in reinforced composites delivering sufficient enough strength properties for large-volum ...
Voir le projet

 9

 TERMINÉ 

“Nanocomposite for building constructions and civil infraestructures: European network pilot production line to promote industrial application cases.” (NANOLEAP)

Date du début: 1 janv. 2015, Date de fin: 30 juin 2018,

NANOLEAP project aims at the development of a coordinated network of specialized pilot lines for the production of nanocomposite based products for different civil infrastructure and building applications.The goal of this infrastructure is to support the research activities of European SMEs in the Construction sector in nanocomposite products enabling the progress of the product to next steps of t ...
Voir le projet

 18

 TERMINÉ 

Up-Scaled Production of Graphene Reinforced Thermosetting Polymers for Composite, Coating and Adhesive Applications (PolyGraph)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2017,

The concept of PolyGraph is to develop new production techniques which will deliver industrial-scale quantities of graphene-reinforced thermosetting polymers, suitable for use in a number of key applications where improvements are needed in the strength, stiffness, toughness, electrical conductivity and thermal properties; such as fibre-reinforced composite resins, coatings and adhesives.The ultim ...
Voir le projet

 14

 TERMINÉ 

European Network for Durable Reinforcement and Rehabilitation Solutions (endure)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

The growth of advanced composites in construction in recent years has been spectacular, doubling in size in the last 10 years. This expansion has been largely due to the use of Fibre Reinforced Polymer reinforcement in structural applications and, although the current economic climate has seen a slowdown of the general construction market, the demand of composite products within the European const ...
Voir le projet

 14

 TERMINÉ 

FOREST BASED COMPOSITES FOR FAÇADES AND INTERIOR PARTITIONS TO IMPROVE INDOOR AIR QUALITY IN NEW BUILDS AND RESTORATION (OSIRYS)

Date du début: 1 juin 2013, Date de fin: 31 mai 2017,

Indoor Air Quality and emissions from building materials have been over the last decades a major challenge for scientists, industry and consumers. Traditional construction materials contribute to contaminants such as VOCs, formaldehyde, particulates and fibres. However, new eco-innovative building materials are able to provide a healthier indoor environment both by substituting source of contamina ...
Voir le projet

 22

 TERMINÉ 

Self-assembly of nano crystalline cellulose for lightweight cellular structures (NCC-FOAM)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2016,

"Cellulose, the primary structural component of plants, is the most ubiquitous and abundant organic compound on the planet. When cellulose fibrils are processed under carefully controlled conditions, it is possible to release highly crystalline nano-particles known as “nano crystalline cellulose (NCC)”. Recently, NCC-FOAM partners have developed a unique technique for self-assembling NCC into high ...
Voir le projet

 13

 TERMINÉ 

Selective Tape-Laying for Cost-Effective Manufacturing of Optimised Multi-Material Components (Stellar)

Date du début: 1 sept. 2013, Date de fin: 31 août 2016,

The aim of the Stellar project is to develop the manufacturing process for high-speed placement of carbon, glass and polymer fibre reinforced matrices, in selected locations in a composite structure, to provide the optimum reinforcement, weight and cost profile within a part.The use of composite materials in structural components is becoming well established in a range of applications, and the mat ...
Voir le projet

 11

 TERMINÉ 

High productivity manufacturing process of composite parts based on zero emissions fast curing coatings and heated moulds (Ecogel Cronos)

Date du début: 1 sept. 2013, Date de fin: 31 août 2016,

The proposed project aims to the development of an ecological and innovative coating for composite parts which may be able to eliminate the styrene emissions from the workplace. Additionally, this type of coating will deliver improved production perfomance in terms of quality and dramatic reduction of associated operational costs which currently burden the progress of composite materials worldwide ...
Voir le projet

 16

 TERMINÉ 

Graphene based thermoplastic masterbatches for conventional and additive manufacturing processes (NANOMASTER)

Date du début: 1 déc. 2011, Date de fin: 30 nov. 2015,

The aims of the NanoMaster project are to reduce the amount of plastic used to make a component by 50% and hence reduce component weight by 50%, at the same time as imparting electrical and thermal functionality. This will be achieved by developing the next generation of graphene-reinforced nano-intermediate that can be used in existing high-throughput plastic component production processes.Graphe ...
Voir le projet

 14

 TERMINÉ 

High Performance, Economical and Sustainable Biocomposite Building Materials (BioBuild)

Date du début: 1 déc. 2011, Date de fin: 31 mai 2015,

The aim of BioBuild is to use biocomposites to reduce the embodied energy in building facade, supporting structure and internal partition systems by at least 50% over current materials with no increase in cost. This will lead to a step change in the use of sustainable, low carbon construction materials, by replacing aluminium, steel, FRP, brick and concrete in buildings.Facades are widely used in ...
Voir le projet

 17

 TERMINÉ 

Innovative strategies, methods and tools for occupational risks management of manufactured nanomaterials (MNMs) in the construction industry (SCAFFOLD)

Date du début: 1 mai 2012, Date de fin: 30 avr. 2015,

Manufacturated nanomaterials and nanocomposites are being considered for various uses in the construction industry and related infrastructure industries, not only for enhancing material properties and functions but also in the context of energy conservation. Despite the current relatively high cost of nano-enabled products, their use in construction materials is likely to increase because of highl ...
Voir le projet

 14

 TERMINÉ 

Composite fuselage section Wafer Design Approach for Safety Increasing in Worst Case Situations and Joints Minimizing (WASIS)

Date du début: 1 janv. 2011, Date de fin: 31 déc. 2014,

"Aeronautics is a key asset for the future of Europe, but nowadays the industry has to face the challenge of “More Affordable, Safer, Cleaner and Quieter” while at the same time accounting for a demand that will triple over the next 20 years. WASIS project aims to rise to this challenge with the development of a composite fuselage structure based on the lattice stiffening concept, optimizing geome ...
Voir le projet

 14

 TERMINÉ 

New tailor-made PHB-based nanocomposites for high performance applications produced from environmentally friendly production routes (BUGWORKERS)

Date du début: 1 juil. 2010, Date de fin: 30 juin 2014,

The project aims to develop a new cost-competitive and environmentally friendly bionanocomposite material based on the combination of a polyhydroxybutyrate (PHB) matrix with new chemical, structure produced by new fermentation culture technology with two types of nanofibres,cellulose whiskers and lignin-based, in order to have a true alternative to engineering materials in two main sectors: househ ...
Voir le projet

 15

 TERMINÉ 

Complex structural and multifunctional Parts from enhanced Wood-based Composites - eWPC (BioStruct)

Date du début: 1 sept. 2008, Date de fin: 31 août 2012,

Despite a lot of research activities carried out in the field of Wood Plastic Compounds there is still a certain lack of interest in the commercial market for this new class of materials. BioStruct will help to overcome these barriers in the market success by the development of the next material generation, so-called enhanced Wood Plastic Composites eWPC, avoiding the most important drawbacks in c ...
Voir le projet

 21

 TERMINÉ 

Processing and Upscaling of Fire-Resistant Nano-Filled Thermosetting Polyester Resin (POLYFIRE)

Date du début: 1 sept. 2009, Date de fin: 31 août 2012,

Polyfire will develop and upscale techniques for processing halogen-free, fire-retardant nanocomposites and coatings based on unsaturated polyester resins and nanoclays. These materials will improve public safety and environmental impact by eliminating halogenated fire-retardants, which produce toxic combustion products. The ability of well-dispersed nanoparticles to enhance the fire-retardancy of ...
Voir le projet

 11

 TERMINÉ 

Aligned Natural Fibres and Textiles for Use in Structural Composite Applications (NATEX)

Date du début: 1 nov. 2008, Date de fin: 30 avr. 2012,

Biocomposites manufactured from natural materials such as fibres and bioderived polymers offer a sustainable alternative to traditional ones, but at present they are not available for use in structural applications. NATEX will develop aligned textiles from natural fibres suitable for use as high strength reinforcing fabrics to produce structural composite parts using bio and oil based thermoplasti ...
Voir le projet

 19

 TERMINÉ 

Resource-Efficient Self-Reinforced Plastic Materials and Processing (ESPRIT)

Date du début: 1 oct. 2008, Date de fin: 31 mars 2012,

The aims of the Esprit project are to reduce the amount of plastic used to make a component by 30% and reduce component weight by 30%, by developing the next generation of lightweight, self-reinforced plastics and the energy-efficient manufacturing processes needed to produce components from this family of materials. Current forms of self-reinforced plastics typically offer typically 3-5 times th ...
Voir le projet

 14