Rechercher des projets européens

18 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Pre-commercial lines for production of surface nanostructured antimicrobial and anti-biofilm textiles, medical devices and water treatment membranes (PROTECT)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

...le, fast, and reproducible. For this, PROTECT uses as a starting point four existing pilot lines emanated from high successful FP7 projects SONO, NOVO and BioElectricSurface. PROTECT will upgrade the nanocoating One step process platform comprising: two roll to roll (R2R) pilots (sonochemical and spray coating) for functional textiles production, a R2R thermo-embedding pilot for antibacterial/biof ...
Voir le projet

 23

 TERMINÉ 

Green Integrated Structural Elements for Retrofitting and New Construction of Buildings (GREEN INSTRUCT)

Date du début: 1 oct. 2016, Date de fin: 31 mars 2020,

The Green INSTRUCT project will develop a prefabricated modular structural building block that is superior to conventional precast reinforced concrete panels by virtue of its reduced weight, improved acoustic and thermal performance and multiple functionalities. The Green INSTRUCT block consists of over 70% of CDW in weight. The Green INSTRUCT project will: (i) achieve sustainability and cost sav ...
Voir le projet

 15

 TERMINÉ 

Enhanced brown adipose tissue activity using nanotechnology approaches (nanoBAT)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2020,

The use of nanotechnology and nano-materials in biological applications is being widely explored and is considered a valuable approach to ameliorate human wellbeing. Specifically, nanoparticles and carbon nanotubes are of great scientific interest as they are currently used clinically as delivery systems for a wide range of drugs. An interdisciplinary approach that considers knowledge in chemistry ...
Voir le projet

 5

 TERMINÉ 

PROtective composite Coatings via Electrodeposition and Thermal Spraying (PROCETS)

Date du début: 1 janv. 2016, Date de fin: 30 juin 2019,

... there is the necessity of finding new, less hazardous methods and materials exhibiting the same or better performance compared to existing ones. The PROCETS project will took advantage of the use of nano-particles for production of composite coatings with superior properties compared to those of HC produced by electroplating or to Co-WC produced by TS. These novel nano-particles will be incorpora ...
Voir le projet

 16

 TERMINÉ 

Development and implementation of Grouping and Safe-by-Design approaches within regulatory frameworks (NanoREG II)

Date du début: 1 sept. 2015, Date de fin: 31 août 2018,

One of the greatest challenges facing regulators in the ever changing landscape of novel nano-materials is how to design and implement a regulatory process which is robust enough to deal with a rapidly diversifying system of manufactured nanomaterials (MNM) over time. Not only does the complexity of the MNM present a problem for regulators, the validity of data decreases with time, so that the wel ...
Voir le projet

 46

 TERMINÉ 

Graphene-based disruptive technologies (GrapheneCore1)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2018,

This project is the second in the series of EC-financed parts of the Graphene Flagship. The Graphene Flagship is a 10 year research and innovation endeavour with a total project cost of 1,000,000,000 euros, funded jointly by the European Commission and member states and associated countries. The first part of the Flagship was a 30-month Collaborative Project, Coordination and Support Action (CP-CS ...
Voir le projet

 158

 TERMINÉ 

European Experience III

Date du début: 1 juin 2016, Date de fin: 31 mai 2017,

The project "European Experience II" enables 45 students at the Austrian Secondary College for Occupations in the Service Industries and Tourism Marienberg in Austria to do their 12-week compulsory placement abroad. The students can do their compulsory placement in 4- or 5-star hotels in one of the European Unions's member states. The placement in the hotels can be done in the kitchen, the restaur ...
Voir le projet

 17

 TERMINÉ 

Taking Nanotechnological Remediation Processes from Lab Scale to End User Applications for the Restoration of a Clean Environment (NANOREM)

Date du début: 1 févr. 2013, Date de fin: 31 janv. 2017,

NANOREM is designed to unlock the potential of nanoremediation and so support both the appropriate use of nanotechnology in restoring land and aquifer resources and the development of the knowledge-based economy at a world leading level for the benefit of a wide range of users in the EU environmental sector.NANOREM uniquely takes a holistic approach to examining how the potential for nanoremediati ...
Voir le projet

 30

 TERMINÉ 

Process Line Implementation for Applied Surface Nanotechnologies (PLIANT)

Date du début: 1 févr. 2013, Date de fin: 31 janv. 2017,

...ng technologies which are all based on atmospheric pressure (AP) vapour phase surface and on AP plasma processing technologies. Both approaches have significant potential for the precise synthesis of nano-structures with tailored properties, but their effective simultaneous combination is particularly promising. We propose to merge the unique potential of atmospheric pressure atomic layer depositi ...
Voir le projet

 24

 TERMINÉ 

Nanotechnology based gas multispectral sensing system for environmental control and protection (IAQSense)

Date du début: 1 sept. 2013, Date de fin: 31 août 2016,

IAQ is a crucial factor for human’s apperception. It is proven that air quality affects the health and the well-being of people. IAQSense focuses on R&D to develop a new nanotechnology based on innovative sensor system, miniaturized, low cost for mass produced sensors.The main technology innovation is based on surface ion mobility dynamics, it separates each gas component and its concentration lik ...
Voir le projet

 10

 TERMINÉ 

Sensitive MeAsuRemenT, detection, and identification of engineered NANOparticles in complex matrices (SMART-NANO)

Date du début: 1 juin 2012, Date de fin: 31 mai 2016,

SMART-NANO will develop an innovative, cost-effective technology platform that provides a total solution “from sample-to-result” for the detection, identification, and measurement of nanoparticles in complex matrices in Consumer Products, in Food, in the Environment and in situ in Biota. A key innovation is the miniaturized, application-specific, cartridge-based system integrating separation, dete ...
Voir le projet

 8

 TERMINÉ 

Graphene-Based Revolutions in ICT And Beyond (GRAPHENE)

Date du début: 1 oct. 2013, Date de fin: 31 mars 2016,

This Flagship aims to take graphene and related layered materials from a state of raw potential to a point where they can revolutionize multiple industries – from flexible, wearable and transparent electronics, to new energy applications and novel functional composites.Our main scientific and technological objectives in the different tiers of the value chain are to develop material technologies fo ...
Voir le projet

 154

 TERMINÉ 

IMPROVING THE AIRCRAFT SAFETY BY SELF HEALING STRUCTURE AND PROTECTING NANOFILLERS (IASS)

Date du début: 1 sept. 2012, Date de fin: 31 août 2015,

...o construct ever more efficient air vehicle able to enable ‘smart’ maintenance including self-repair capabilities. The improvement in the aircraft safety by self-healing structures and protecting nanofillers is a revolutionary approach that should lead to the creation of novel generation of multifunctional aircraft materials with strongly desired properties and design flexibilities. In recent year ...
Voir le projet

 10

 TERMINÉ 

Demonstration of a cost effective medium size Chemical Looping Combustion through packed beds using solid hydrocarbons as fuel for power production with CO2 capture (DEMOCLOCK)

Date du début: 1 juin 2011, Date de fin: 31 mai 2015,

DemoCLOCK aims to demonstrate the technical, economic and environmental feasibility for implementing packed bed based high temperature high pressure Chemical Looping Combustion (CLC) in large-scale power plants. A medium sized (500 kW) fixed bed reactor will be designed, build and operated integrated in an existing Integrated Gasification Combined Cycle (IGCC) power plant at Elcogas. The packed be ...
Voir le projet

 11

 TERMINÉ 

Neuronal NanoCarbon Interfacing Structures (NeuroCare)

Date du début: 1 mars 2012, Date de fin: 28 févr. 2015,

... electronic properties (metal, semiconductor and insulator), (ii) are bio-inert and (iii) are physically robust. Coupling between electronic devices and neurons was recently studied using “soft”, nanocrystalline diamond-based micro-electrode arrays, evaluated in laboratory animals for retinal stimulation. These diamond implants considerably reduced gliosis, enabled stimulation currents to be raise ...
Voir le projet

 14

 TERMINÉ 

Microstructure secured and self-verifying medicines (SAVEmed)

Date du début: 1 avr. 2011, Date de fin: 31 mars 2014,

Counterfeit medicines are a serious and fast expanding threat for the customer’s health and the pharmaceutical manufacturers business. The aim of this research collaboration is to add anti-counterfeiting and track & trace technology to the product level that goes beyond the state-of-the-art security approach on the packaging level. The project SAVEmed will bring a solution for the counterfeit and ...
Voir le projet

 7

 TERMINÉ 

A Novel Filtration Technology Targeted at Enhancing the European Healthcare System´s Efforts in Restraining the Spread of the Hospital Infection (HAIFREE)

Date du début: 1 janv. 2011, Date de fin: 31 déc. 2012,

"At healthcare facilities, there is a strong demand for a new advanced air cleaning technology to prevent infectious diseases such as severe acute respiratory syndrome (SARS) and Hospital Acquired Infections (HAI). The system would avoid the high costs related to healthcare and legal matters which increase every year and are a burden to the fixed costs of maintaining sanitary systems in Europe and ...
Voir le projet

 8

 TERMINÉ 

A wearable miniaturized fall detection system for the elderly (FallWatch)

Date du début: 1 févr. 2009, Date de fin: 31 juil. 2011,

Falls among the elderly occur frequently. Approximately 30% of people over 65 fall accidentally each year, and for those over 80 this rate raises up to 50%. Falls are an important factor in the health limitations of the elderly due to a high morbidity caused by physical and psychological consequences, loss of independence and even death. Late or non existing responses cause 2 million persons havin ...
Voir le projet

 11