23 projets européens trouvés
Recherche sur 125080 projets européens
TERMINÉ
Soot Processes and Radiation in Aeronautical inNOvative combustors (SOPRANO)
Date du début: 1 sept. 2016, Date de fin: 31 août 2020,
For decades, most of the aviation research activities have been focused on the reduction of noise and NOx and CO2 emissions. However, emissions from aircraft gas turbine engines of non-volatile PM, consisting primarily of soot particles, are of international concern today. Despite the lack of knowledge toward soot formation processes and characterization in terms of mass and size, engine manufactu ...
Voir le projet
18
Participants partenaires
TERMINÉ
Multi-ObjecTive design Optimization of fluid eneRgy machines (MOTOR)
Date du début: 1 sept. 2015, Date de fin: 31 août 2018,
The MOTOR project focuses on ICT-enabled design optimization technologies for fluid energy machines (FEMs) that transfer mechanical energy to and from the fluid, in particular for aircraft engines, ship propellers, water turbines, and screw machines. The performance of these machines essentially depends on the shape of their geometry, which is described by functional free-form surfaces. Even small ...
Voir le projet
11
Participants partenaires
TERMINÉ
Apprentice Exchange 2016
Date du début: 10 juil. 2016, Date de fin: 9 juil. 2017,
BAE Systems, Airbus Defence & Space and MTU will be working together to give 12 second year Engineering and Business Advanced Apprentices first hand experience and greater knowledge of the manufacturing and testing techniques used by the European Aerospace industry. Whilst developing and improving their language, communication and social skills, the participants will obtain a greater level of ind ...
Voir le projet
3
Participants partenaires
TERMINÉ
Low Emissions Core-Engine Technologies (LEMCOTEC)
Date du début: 1 oct. 2011, Date de fin: 30 juin 2017,
The main objective of the LEMCOTEC project will be the improvement of core-engine thermal efficiency by increasing the overall pressure ratio (OPR) to up to 70 leading to a further reduction of CO2. Since NOx increases with OPR, combustion technologies have to be further developed, at the same time, to at least compensate for this effect. The project will attain and exceed the ACARE targets for 20 ...
Voir le projet
39
Participants partenaires
TERMINÉ
Engine Breakthrough Components and Subsystems (E-BREAK)
Date du début: 1 oct. 2012, Date de fin: 31 mars 2017,
Future aero engines will need to be more efficient and contribute to the reduction on environmental impact of air transportation. They must reach some standards of performance by reducing emissions and creating some savings on operation costs.EIMG consortium has launched since several years some initiatives to develop future engines in the frame of the European Committee research programmes.Within ...
Voir le projet
48
Participants partenaires
TERMINÉ
Exact and Adaptive Modeling and Simulation of the Air Passage of Aircraft Engines (EXAMPLE)
Date du début: 1 janv. 2013, Date de fin: 31 déc. 2016,
"The interaction between the processes of design and analysis of mechanical components is at the core of industrial engineering. In particular in the very specialized and competitive field of designing highly-efficient aircraft engines, a large number of optimization loops is required to fully exploit the entire potential of efficiency with respect to various mechanical, aerodynamic and thermal ob ...
Voir le projet
3
Participants partenaires
TERMINÉ
Full Aero-thermal Combustor-Turbine interactiOn Research (FACTOR)
Date du début: 1 déc. 2010, Date de fin: 30 nov. 2016,
To achieve lower Specific Fuel Consumption (SFC) and CO2/NOx emissions, modern turbomachineries operate at high velocities and high temperature conditions. The lack of confidence in the prediction of combustor-turbine interactions leads to apply extra safety margins on components design. Therefore, the understanding of combustor-turbine flow field interactions is mandatory to preserve High Pressur ...
Voir le projet
24
Participants partenaires
TERMINÉ
Apprentice Exchange
Date du début: 1 juin 2015, Date de fin: 31 mai 2016,
BAE Systems, Airbus Defence & Space and MTU will be working together to give 10 second year Engineering and Business Advanced Apprentices first hand experience and greater knowledge of the manufacturing and testing techniques used by the European Aerospace industry. Whilst developing and improving their language, communication and social skills, the participants will obtain a greater level of inde ...
Voir le projet
3
Participants partenaires
TERMINÉ
Intelligent Design Methodologies for Low Pollutant Combustors for Aero-Engines (IMPACT-AE)
Date du début: 1 nov. 2011, Date de fin: 31 mai 2016,
The environmental benefits of low emissions lean burn technology in reducing NOx emissions up to 80% will only be effective when these are deployed to a large range of new aero-engine applications. While integrating and developing low emission combustion design rules, IMPACT-AE will deliver novel combustor design methodologies for advanced engine architectures and thermodynamic cycles. It will sup ...
Voir le projet
21
Participants partenaires
TERMINÉ
Development of Aero Engine Component Manufacture using Laser Additive Manufacturing (MERLIN)
Date du début: 1 janv. 2011, Date de fin: 31 déc. 2014,
The concept of the MERLIN project is to reduce the environmental impact of air transport using Additive Manufacturing (AM) techniques in the manufacture of civil aero engines. MERLIN will develop AM techniques, at the level 1 stage, to allow environmental benefits including near 100% material utilisation, current buy to fly ratios result in massive amounts of waste, no toxic chemical usage and no ...
Voir le projet
16
Participants partenaires
TERMINÉ
Fuel Injector Research for Sustainable Transport (FIRST)
Date du début: 1 déc. 2010, Date de fin: 30 nov. 2014,
FIRST will deliver key enabling technologies for combustion emission reduction by developing improved design tools and techniques for modelling and controlling fuel sprays and soot.Aviation’s environmental impact must be reduced to allow sustainable growth to benefit European industry and society. This is captured in ACARE’s 2020 goals of reducing CO2 by 50%, NOx by 80% and in SRA1/2 proposed redu ...
Voir le projet
22
Participants partenaires
TERMINÉ
Engine Representative Internal Cooling Knowledge and Applications (ERICKA)
Date du début: 1 juil. 2009, Date de fin: 30 juin 2014,
"The goal of ERICKA is to directly contribute to reductions in aircraft engine fuel consumption with a targeted contribution of 1% reduction in SFC relative to engines currently in service. The fuel efficiency of a jet engine used for aircraft propulsion is dependent on the performance of many key engine components. One of the most important is the turbine whose efficiency has a large influence ...
Voir le projet
20
Participants partenaires
TERMINÉ
Flutter-Free Turbomachinery Blades (FUTURE)
Date du début: 1 juil. 2008, Date de fin: 30 juin 2013,
"FUTURE brings together European and international well reputed centres-of-excellence in order to reach major scientific & technical objectives in striving towards flutter-free turbomachine blades. By advancing the state-of-the-art in flutter prediction capabilities and design rules, the FUTURE project will lead to benefits in terms of decreased development cost, reduced weight and fuel consumptio ...
Voir le projet
26
Participants partenaires
TERMINÉ
imProved reliabIlity inspeCtion of Aeronautic structure through Simulation Supported POD (PICASSO)
Date du début: 1 juil. 2009, Date de fin: 31 déc. 2012,
"With aging engines and the increase of air traffic in the next 20 years, a central challenge in the aeronautical industry will concern the increase of the efficiency of maintenance which still represents around 20% of an operator’s indirect operating costs. This challenge is particularly important for metallic parts within the engine aircraft industry, because of the criticity of rotative compone ...
Voir le projet
14
Participants partenaires
TERMINÉ
Technologies Enhancement for Clean Combustion in Aero-engines (TECC-AE)
Date du début: 1 juil. 2008, Date de fin: 31 déc. 2012,
"Due to continuous efforts through past and ongoing European projects, lean combustion by means of internally staged injectors now appears to be the promising technology for obtaining the required emission reductions compatible with a sustainable growth of aviation transport. (cf ACARE 2020) Recognising that putting into service such a technology as soon as possible is the only way to effectively ...
Voir le projet
18
Participants partenaires
TERMINÉ
Advanced flexible automation cell (FLEXA)
Date du début: 1 juin 2008, Date de fin: 30 nov. 2012,
"Truly flexible automation of -low volume, -high value per part components, -managing quality assurance aspect throughout the value chain is a key research area for the manufacturing and production community in Europe. The FLEXA project has identified key elements for delivering advancement in this area. The key areas of research will be; cell design solutions in line with product design decisions ...
Voir le projet
17
Participants partenaires
TERMINÉ
Engine LUBrication SYStem technologies (ELUBSYS)
Date du début: 1 juin 2009, Date de fin: 30 nov. 2012,
"In aeronautics, gas turbine engines are equipped with lubrication systems whose function is to cool and lubricate the highly loaded rolling bearings and gearboxes. Current lubrication systems are based on architectures and technologies that have not much evolved for the last 30 years and that, despite advances made on components, have reached their technological limit. Future aero-engine requirem ...
Voir le projet
20
Participants partenaires
TERMINÉ
Collaborative & Robust Engineering using Simulation Capability Enabling Next Design Optimisation (CRESCENDO)
Date du début: 1 mai 2009, Date de fin: 31 oct. 2012,
"The IMG4 project CRESCENDO addresses the Vision 2020 objectives for the aeronautical industry by contributing significantly to the fulfilment of three specific targets of the aeronautical industry’s Strategic Research Agenda. CRESCENDO will develop the foundations for the Behavioural Digital Aircraft (BDA), taking experience and results from VIVACE, and integrating these into a federative system ...
Voir le projet
59
Participants partenaires
TERMINÉ
Adaptive and Passive Flow Control for Fan Broadband Noise Reduction (FLOCON)
Date du début: 1 sept. 2008, Date de fin: 31 août 2012,
"Air traffic is predicted to grow by 5% per year in the short and medium term. Technology ad-vances are required to achieve this growth without unacceptable levels of noise. FLOCON addresses this issue by reducing fan noise at source through the development of innovative concepts based on flow control technologies. FLOCON is aimed primarily at reducing fan broadband noise. This is one of the most ...
Voir le projet
17
Participants partenaires
TERMINÉ
Alternative Fuels and Biofuels for Aircraft Development (ALFA-BIRD)
Date du début: 1 juil. 2008, Date de fin: 30 juin 2012,
"ALFA-BIRD aims at developing the use of alternative fuels in aeronautics. In a context where the price of oil is increasing and with impact of fossil fuels on climate change, the sustainable growth of the civil aviation is conditioned by the respect of the environment. In this context, using biofuels and alternative fuels in aeronautics is a great challenge, since the operational constraints (e.g ...
Voir le projet
24
Participants partenaires
TERMINÉ
Adaptive Control of Manufacturing Processes for a New Generation of Jet Engine Components (ACCENT)
Date du début: 1 juil. 2008, Date de fin: 31 mai 2012,
"ACCENT addresses the relevance to the call 7.1: “Aeronautics and Air Transport” by “Improving Cost efficiency” and quality of safety critical aircraft engine components. The manufacture of safety critical rotating components in modern aero engines is by nature very conservative. In order to achieve the required engine performance, thermal and mechanical stresses are pushed to the maximum, which i ...
Voir le projet
14
Participants partenaires
TERMINÉ
valiDation of Radical Engine Architecture systeMs (DREAM)
Date du début: 1 févr. 2008, Date de fin: 31 janv. 2012,
"Since the publication of the ACARE goals, the commercial and political pressure to reduce CO2 has increased considerably. DREAM is the response of the aero-engine community to this pressure. The first major DREAM objective is to design, integrate and validate new engine concepts based on open rotor contra-rotating architectures to reduce fuel consumption and CO2 emissions 7% beyond the ACARE 2020 ...
Voir le projet
46
Participants partenaires
TERMINÉ
MOVET II explored a practical approach to a system ECVET. The modules for students ended with an especially designed assessment of learning outcomes. Training providers, companies, competent bodies and other protagonists of vocational education validated the acquired learning outcomes as relevant for the training profile and award credit points. A memorandum of understanding of all involved partne ...
Voir le projet