Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Multiple manifestations of genetic and non-genetic factors in Multiple Sclerosis disentangled with a multi-omics approach to accelerate personalised medicine (MultipleMS)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2021,

The complex interactions between genetic and non-genetic factors produce heterogeneities in patients as reflected in the diversity of pathophysiology, clinical manifestations, response to therapies, disease development and progression. Yet, the full potential of personalized medicine entails biomarker-guided delivery of efficient therapies in stratified patient populations.MultipleMS will therefor ...
Voir le projet

 25

 TERMINÉ 

Flow physics and interaction of laminar-turbulent transition and flow separation studied by direct numerical simulations (TRANSEP)

Date du début: 1 sept. 2016, Date de fin: 31 août 2021,

The vision spelled out in this proposal is to overcome the failure of Computational Fluid Dynamics to tackle one of the central unsolved fluid physics problems, namely predicting the sensitive flow physics associated with laminar-turbulent transition and flow separation. A recent, highly influential report by NASA (Slotnick et al., 2014) clearly states that the major shortcoming of CFD is its “… i ...
Voir le projet

 2

 TERMINÉ 

Boundary value problems for nonlinear integrable equations (BOPNIE)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2021,

The purpose of this project is to develop new methods for solving boundary value problems (BVPs) for nonlinear integrable partial differential equations (PDEs). Integrable PDEs can be analyzed by means of the Inverse Scattering Transform, whose introduction was one of the most important developments in the theory of nonlinear PDEs in the 20th century. Until the 1990s the inverse scattering methodo ...
Voir le projet

 2

 TERMINÉ 

Advanced materials solutions for next generation high efficiency concentrated solar power (CSP) tower systems (NEXTOWER)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

NEXTOWER shall introduce a set of innovative materials to boost the performance of atmospheric air-based concentrated solar power (CSP) systems to make them commercially viable. In particular, tower systems are appealing for the great environmental compatibility and offer tremendous potential for efficient (electrical and thermal) power generation. Yet, their industrial exploitation has been so fa ...
Voir le projet

 18

 TERMINÉ 

Personal Technologies for Affective Health (AffecTech)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

Personalized health is a European priority and one of the strategic research areas for Horizon 2020. This project advances the state-of-the-art of personal health technologies for affective disorders, estimated to be the highest ranking cause of disease by 2020. It marks a significant shift from the current wearable technologies capturing emotional responses whose understanding usually requires ph ...
Voir le projet

 12

 TERMINÉ 

Smart mitigation of flow-induced acoustic radiation and transmission for reduced aircraft, surface transport, workplaces and wind energy noise (SmartAnswer)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

A step change in our noise mitigation strategies is required in order to meet the environmental targets set for a number of sectors of activity affecting people through noise exposure. Besides being a hindrance to our daily life and subject to regulations, noise emission is also a competitive issue in today’s global market. To address these issues, new technologies have been emerging recently, bas ...
Voir le projet

 13

 TERMINÉ 

Biofunctionalised Electroconducting Microfibres for the Treatment of Spinal Cord Injury (Neurofibres)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

Bio-electronic microsystems hold promise for repairing the damaged central nervous system (CNS). However, this potential has not been developed because their implantation inflicts additional neural injury, and ensuing inflammation and fibrosis compromise device functionality. In Neurofibres we want to achieve a breakthrough in “Neuroregenerative Bio-electronics”, developing dual-function devices t ...
Voir le projet

 8

 TERMINÉ 

Production of Scandium compounds and Scandium Aluminum alloys from European metallurgical by- products (SCALE)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2020,

Scandium (Sc) is one of the highest valued elements in the periodic table and an element which is usually grouped in REEs as it shares many characteristics with Yttrium. Scandium technological applications are unique, as it is a key component in producing Solid Oxide Fuel Cells (Scandia-Stabilized-Zirconia solid electrolyte layer) or high strength Aluminum alloys used in aerospace and 3D printing ...
Voir le projet

 20

 TERMINÉ 

Valorisation of mushroom agrowastes to obtain high value products (FUNGUSCHAIN)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2020,

The project aims at the valorization of agricultural residues coming from mushroom (Agaricus Bisporus) farming residues as a case to set up new cascading possibilities using innovative procedures to extract high value bio-based additives (antioxidants, antimicrobials, proteins), convert lipids into bioplasticizers and polysaccharides (glucans and fermentable sugars) into biopolymers using remainin ...
Voir le projet

 17

 TERMINÉ 

Innovative solutions for sustainable mobility of people in suburban city districts and emission free freight logistics in urban centres. (CIVITAS ECCENTRIC)

Date du début: 1 sept. 2016, Date de fin: 31 août 2020,

The cities of Madrid, Stockholm, Munich, Turku and Ruse have formed the CIVITAS ECCENTRIC consortium to tackle the challenges of mobility in suburban districts and clean, silent and CO2 free city logistics. In many cities, these two important areas have received less attention in urban mobility policies.Though European cities have made significant steps forward in making city centres attractive an ...
Voir le projet

 30

 TERMINÉ 

EU Training Network for Resource Recovery through Enhanced Landfill Mining (NEW-MINE)

Date du début: 1 sept. 2016, Date de fin: 31 août 2020,

Europe has somewhere between 150,000 and 500,000 landfill sites, with an estimated 90% of them being “non-sanitary” landfills, predating the EU Landfill Directive of 1999. These older landfills tend to be filled with municipal solid waste and often lack any environmental protection technology. In order to avoid future environmental and health problems, many of these landfills will soon require exp ...
Voir le projet

 12

 TERMINÉ 

Demonstration of INTElligent grid technologies for renewables INTEgration and INTEractive consumer participation enabling INTEroperable market solutions and INTErconnected stakeholders (InteGrid)

Date du début: 1 janv. 2017, Date de fin: 30 juin 2020,

InteGrid’s vision is to bridge the gap between citizens, technology and the other players of the energy system. The project will demonstrate how DSOs may enable all stakeholders to actively participate in the energy market and distribution grid management and develop and implement new business models, making use of new data management and consumer involvement approaches. Moreover, the consortium w ...
Voir le projet

 15

 TERMINÉ 

Sustainable Integrated Management FOR the NEXUS of water-land-food-energy-climate for a resource-efficient Europe (SIM4NEXUS)

Date du début: 1 juin 2016, Date de fin: 31 mai 2020,

Land, food, energy, water and climate are interconnected, comprising a coherent system (the ‘Nexus’), dominated by complexity and feedback. The integrated management of the Nexus is critical to secure the efficient and sustainable use of resources. Barriers to a resource efficient Europe are policy inconsistencies and incoherence, knowledge gaps, especially regarding integration methodologies and ...
Voir le projet

 28

 TERMINÉ 

RELapses prevENTion in chronic autoimmune disease: common mechanisms and co-morbidities (RELENT)

Date du début: 1 nov. 2015, Date de fin: 30 avr. 2020,

RELENT is multidisciplinary group of scientists and clinical investigators whose goal is to develop individualized treatment for chronic autoimmune diseases, such as rheumatoid arthritis and vasculitis, that cause considerable mortality and morbidity, both from uncontrolled disease and treatment associated co-morbidities, like infection and malignancy. This requires the need to stratify patients b ...
Voir le projet

 14

 TERMINÉ 

Rail Infrastructure Systems Engineering Network (RISEN)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2020,

Social and economic growth, security and sustainability in Europe are at risk of being compromised due to aging and failing railway infrastructure systems. This partly reflects a recognised skill shortage in railway infrastructure engineering. This project, RISEN, aims to enhance knowledge creation and transfer using both international and intersectoral secondment mechanisms among European Advance ...
Voir le projet

 13

 TERMINÉ 

Long-term molecular nanoscale imaging of neuronal function (MoNaLISA)

Date du début: 1 avr. 2015, Date de fin: 31 mars 2020,

Synaptic function is difficult to analyze in living neurons using conventional optics, since the synaptic organelles and protein clusters are small and tightly spaced. The solution to this problem can come from the field of super-resolution fluorescence microscopy, or nanoscopy. However, the current approaches to nanoscopy are still far from reaching this goal. Single molecule-based approaches (in ...
Voir le projet

 2

 TERMINÉ 

Convergence of Electronics and Photonics Technologies for Enabling Terahertz Applications (CELTA)

Date du début: 1 mars 2016, Date de fin: 29 févr. 2020,

CELTA: Convergence of Electronics and Photonics Technologies for Enabling Terahertz Applications aims to produce the next generation of researchers who will enable Europe to take a leading role in the multidisciplinary area of utilizing Terahertz technology for applications involving components and complete systems for sensing, instrumentation, imaging, spectroscopy, and communications. All these ...
Voir le projet

 13

 TERMINÉ 

Bottom-up hybrid control and planning synthesis with application to multi-robot multi-human coordination (BUCOPHSYS)

Date du début: 1 mars 2015, Date de fin: 29 févr. 2020,

Current control applications necessitate the treatment of systems with multiple interconnected components, rather than the traditional single component paradigm that has been studied extensively. The individual subsystems may need to fulfil different and possibly conflicting specifications in a real-time manner. At the same time, they may need to fulfill coupled constraints that are defined as re ...
Voir le projet

 2

 TERMINÉ 

New Diagnostics for Infectious Diseases: “ND4ID” (ND4ID)

Date du début: 1 mars 2016, Date de fin: 29 févr. 2020,

Infectious diseases are a major burden to public health and the global economy, not in the least due to antimicrobial resistance. Rapid point of care (POC) in vitro diagnostics (IVD) are key tools in the effective clinical management of patients with infectious diseases. Yet there is still a large unmet clinical need for more rapid POC IVDs generating more clinically relevant, actionable informati ...
Voir le projet

 9

 TERMINÉ 

PROMOTioN - Progress on Meshed HVDC Offshore Transmission Networks (PROMOTION)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

In order to unlock the full potential of Europe’s offshore resources, network infrastructure is urgently required, linking off-shore wind parks and on-shore grids in different countries. HVDC technology is envisaged but the deployment of meshed HVDC offshore grids is currently hindered by the high cost of converter technology, lack of experience with protection systems and fault clearance componen ...
Voir le projet

 35

 TERMINÉ 

Myopia: Fundamental understanding needed (MyFUN)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

The proposed ETN “Myopia: fundamental understanding needed” (MyFUN) provides an international, interdisciplinary platform to train young scientists at the interface of physics and biology, to study unresolved questions about the visual control of eye growth. It has been extensively documented that the growth of the eye is controlled by closed-loop visual feedback, using retinal image defocus as an ...
Voir le projet

 7

 TERMINÉ 

GrowSmarter

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2019,

GrowSmarter aims to:• Improve the quality of life for European citizens by better mobility, housing and the quality of urban infrastructure while improving the citizens economy by lower energy costs and creating as much as 1500 new jobs (on the demonstration level).• Reduce the environmental impact by lower energy needs by 60 % and increased use of renewable energy thus reducing GHG emissions eve ...
Voir le projet

 41

 TERMINÉ 

Achieving Complex Collaborative Missions via Decentralized Control and Coordination of Interacting Robots (Co4Robots)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

Imagine a scenario where multiple robots have been deployed to provide services such as object handling/transportation, or pickup and delivery operations. In such a context, different robots with varying capabilities must be coordinated in order to achieve various multi-tasking procedures. Thus, the effective supervision and coordination of the overall heterogeneous system mandates a decentralized ...
Voir le projet

 7

 TERMINÉ 

Stability and Sensitivity Methods for Industrial Design (SSeMID)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

The increasing environmental awareness of the European society has been always present in the aeronautical community, industry and research centres, having a definite influence on the way the aircraft of the future should be. In this line, the ACARE Vision for 2020, a Group of Renowned Personalities in the aeronautical field, has formulated a clear set of requirements for civil transport aircraft ...
Voir le projet

 10

 TERMINÉ 

Optical Ultra-Sensor (OPUS)

Date du début: 1 nov. 2014, Date de fin: 31 oct. 2019,

"This project aims at pushing the limits of optical sensing on a microchip by orders of magnitude, thereby allowing for ultra-high sensitivity in optical detection and enabling first-time-ever demonstrations of several optical sensing principles on a microchip. My idea is based upon our distributed-feedback lasers in rare-earth-ion-doped aluminum oxide waveguides on a silicon chip with ultra-narro ...
Voir le projet

 2

 TERMINÉ 

European Human Rights Law for Universities of Ukraine and Moldova

Date du début: 15 oct. 2016, Date de fin: 14 oct. 2019,

Wider objective is to enable Ukraine and Moldova to face the challenges of dealing with Human Rights policies in accordance with EU and international standards through capacity and institutional building measures. By developing and introducing new Bologna-compliant case-oriented master and doctoral curricula, intensive capacity building mechanism and establishing Offices of Student Ombudsman suppo ...
Voir le projet

 17

 TERMINÉ 

Apprentissage Hybride Mutualisé et Ouvert dans les Universités Marocaines

Date du début: 15 oct. 2016, Date de fin: 14 oct. 2019,

The project MarMOOC, entitled «apprentissage hybride mutualisé et ouvert dans les universités Marocaines» (Shared blended and open learning for Moroccan universities), aims to support a thoughtful integration and wide distribution of Information and Communication Technologies (ICT) as an efficient teaching support for Moroccan universities. In order to reduce the impact of massification of higher ...
Voir le projet

 14

 TERMINÉ 

Cognitively enhanced robot for flexible manufacturing of metal and composite parts (COROMA)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

COROMA project proposes to develop a cognitively enhanced robot that can execute multiple tasks for the manufacturing of metal and composite parts. COROMA will therefore provide the flexibility that European metalworking and advanced material manufacturing companies require to compete in the rapidly evolving global market.The main output of COROMA project will be a modular robotic system that will ...
Voir le projet

 17

 TERMINÉ 

Fabricating colloidal materials with microfluidics (Microflusa)

Date du début: 1 sept. 2015, Date de fin: 31 août 2019,

In the field of colloidal science, much progress has been done on the synthesis of complex building blocks mimicking molecular structures with the hope of elaborating innovative materials. However, in the present state of the art, the rates at which these building blocks are obtained are exceedingly small. As a consequence, even though theoretically, revolutionary materials can be imagined, throug ...
Voir le projet

 6

 TERMINÉ 

Building Innovation in the Extended Digital Chain (InnoChain)

Date du début: 1 sept. 2015, Date de fin: 31 août 2019,

The InnoChain ETN network is a shared research training environment examining how advances in digital design tools challenge building culture enabling more sustainable, more informed and more materially smart design solutions. The network aims to train a new generation of interdisciplinary researchers with a strong industry focus that can effect real changes in the way we think, design and build o ...
Voir le projet

 6

 TERMINÉ 

From Landscapes to Earthscapes: Understanding Visual Cultures of Global Environmental Crisis and the Making of Global Environmental Images, 1945-present (EARTHSCAPES) (EARTHSCAPES)

Date du début: 1 sept. 2017, Date de fin: 31 août 2019,

From Landscapes to Earthscapes: Understanding Visual Cultures of Global Environmental Crisis and the Making of Global Environmental Images, 1945-present (EARTHSCAPES)EARTHSCAPES will contribute to current debates on the origins and possible futures of the environmental crisis by providing an innovative historical, social and political perspective on the production, circulation and reception of glo ...
Voir le projet

 2

 TERMINÉ 

Safe long term operation of light water reactors based on improved understanding of radiation effects in nuclear structural materials (SOTERIA)

Date du début: 1 sept. 2015, Date de fin: 31 août 2019,

The overall aim of the SOTERIA project is to improve the understanding of the ageing phenomena occurring in reactor pressure vessel (RPV) steels and in the internal steels (internals) in order to provide crucial information to regulators and operators to ensure safe long-term operation (LTO) of existing European nuclear power plants (NPPs). SOTERIA has set up a collaborative research consortium wh ...
Voir le projet

 25

 TERMINÉ 

Role of technologies in an energy efficient economy – model-based analysis of policy measures and transformation pathways to a sustainable energy system (REEEM)

Date du début: 1 févr. 2016, Date de fin: 31 juil. 2019,

REEEM aims to gain a clear and comprehensive understanding of the system-wide implications of energy strategies in support of transitions to a competitive low-carbon EU society. Comprehensive technology impact assessments will target the full integration from demand to supply and from the individual to the entire system. It will further address its trade-offs across society, environment and econom ...
Voir le projet

 12

 TERMINÉ 

Increasing Gender Diversity in STEM

Date du début: 1 sept. 2016, Date de fin: 30 juin 2019,

Lack of gender diversity in STEM studies and careers remains a persistent problem in most western countries, for example most western countries have 20% or less of graduating engineers as female, and often less than 10% of the engineering workforce.Much research has been done on the reasons for this imbalance, with a general consensus that a resolution is highly challenging, requiring multifaceted ...
Voir le projet

 10

 TERMINÉ 

Advanced Big Data Value Chain for Public Safety and Personal Security (AEGIS)

Date du début: 1 janv. 2017, Date de fin: 30 juin 2019,

AEGIS, brings together the data, the network & the technologies to create a curated, semantically enhanced, interlinked & multilingual repository for public & personal safety-related big data. It delivers a data-driven innovation that expands over multiple business sectors & takes into consideration structured, unstructured & multilingual datasets, rejuvenates existing models and facilitates organ ...
Voir le projet

 11

 TERMINÉ 

Euro-African Open Biomedical Engineering e-Platform for Innovation through Education (UBORA)

Date du début: 1 janv. 2017, Date de fin: 30 juin 2019,

The project aims at creating an EU-Africa e-Infrastructure, UBORA, for open source co-design of new solutions to face the current and future healthcare challenges of both continents, by exploiting networking, knowledge on rapid prototyping of new ideas and sharing of safety criteria and performance data. The e-infrastructure will foster advances in education and the development of innovative solut ...
Voir le projet

 8

 TERMINÉ 

Gamification of participatory science for training and education purposes (GAPARS)

Date du début: 1 janv. 2017, Date de fin: 30 juin 2019,

Creating effective ways for citizen science is immensely important. Scientists in all fields increasingly rely on active public participation for experiments and analyses of complex and/or massive data, and the outreach and education possibilities of citizen science are enormous.Yet there are three key issues for any citizen science project: (i) reach out to a sufficiently large audience, (ii) low ...
Voir le projet

 9

 TERMINÉ 

In-Vessel Melt Retention Severe Accident Management Strategy for Existing and Future NPPs (IVMR)

Date du début: 1 juin 2015, Date de fin: 31 mai 2019,

The stabilization of molten corium is recognised as essential if a safe and stable state is to be reached following a severe accident. Among the possible options, In-Vessel Melt Retention (IVMR) appears as an attractive solution that would minimize the risks of containment failure (less Hydrogen produced, no corium-concrete interaction), if it can be proved to be feasible.The strategy is already a ...
Voir le projet

 25

 TERMINÉ 

Flagship demonstration of an integrated plant towards large scale supply and market assessment of MFC (EXILVA)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2019,

The Exilva flagship project will consist in the upscaling of the Borregaard’s MFC process from the existing pilot plant (50-70 tons/year) to the full scale flagship plant (1000 tons/year) and demonstrate an industrial symbiosis between the biomass/forest industry (Norwegian Spruce) and application industries in a wide range of market segments by developing and commercialising added value (performa ...
Voir le projet

 7

 TERMINÉ 

Climate Security with Local Authorities (CLISEL) From insecurity takers to security makers: mobilizing local authorities to secure the EU against the impacts of climate change in Third Countries (CLISEL)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2019,

CLISEL proposes an innovative approach to the question of how Europe can be secured from the impacts of climate change in Third Countries. Most academic and policy initiatives to date have focused on the direct security impacts of climate change in Third Countries and/or on the indirect impacts on international security (e.g. concerning regional economic or political stability). While those initia ...
Voir le projet

 6