Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Federation for FIRE Plus (Fed4FIREplus)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2021,

The Fed4FIRE+ project has the objective to run and further improve Fed4FIRE’s “best-in-town” federation of experimentation facilities for the Future Internet Research and Experimentation initiative. Federating a heterogeneous set of facilities covering technologies ranging from wireless, wired, cloud services and open flow, and making them accessible through common frameworks and tools suddenly op ...
Voir le projet

 24

 TERMINÉ 

Enabling flexible integrated circuits and applications (FLICs)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2021,

Thin-film transistor technologies are present in many products today that require an active transistor backplane e.g. flat-panel displays and flat-panel photodetector arrays. Unipolar n-type transistors based on amorphous Indium-Gallium-Zinc-Oxide (a-IGZO) as semiconductor is currently the most promising technology for next generation products demanding a high-performant, low power transistor, ma ...
Voir le projet

 2

 TERMINÉ 

Photonic Integrated Circuits Assembly and Packaging Pilot Line (PIXAPP)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

PIXAPP will establish the world’s first open access Photonic Integrated Circuit (PIC) assembly & packaging Pilot Line. It combines a highly-interdisciplinary team of Europe’s leading industrial & research organisations. PIXAPP provides Europe’s SMEs with a unique one-stop-shop, enabling them to exploit the breakthrough advantages of PIC technologies. PIXAPP bridges the ‘valley of death’, providing ...
Voir le projet

 20

 TERMINÉ 

Spintronic-Photonic Integrated Circuit platform for novel Electronics (SPICE)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,

The main objective of SPICE is to realize a novel integration platform that combines photonic, magnetic and electronic components. Its validity will be shown by a conceptually new spintronic-photonic memory chip demonstrator with 3 orders of magnitude higher write speed and 2 orders of magnitude lower energy consumption than state-of-the-art spintronic memory technologies. This enables, e.g., futu ...
Voir le projet

 6

 TERMINÉ 

Low energy ELEctron driven chemistry for the advantage of emerging NAno-fabrication methods (ELENA)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,

Chemistry is fundamental to nanotechnology, as chemistry can prepare specifically tailored molecules to serve, in a bottom-up approach, as the building blocks for the fabrication of functional and structured nano-materials. Nanotechnology is the technology of the 21st century with applications from electronics to biotechnology and medicine. The next decade will thus be characterized by an increasi ...
Voir le projet

 14

 TERMINÉ 

INternational Smart Collaborative Open-access hybrid Printed Electronics pilot line (InSCOPE)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

The InSCOPE project will set-up an open access pilot line service for Hybrid TOLAE (H-TOLAE) technologies capable of sampling products at TRL6-7. It positions itself in between R&D and industry and deploys a service for validating potential H-TOLAE products. Manufacturing progresses beyond R&D level (TRL5 towards 6) by improving processes, functionality and reliability allowing sampling at high qu ...
Voir le projet

 14

 TERMINÉ 

Capacitive Identification Tokens (CAPID)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

Almost every person in Europe now has access to a connected touch device and the creation of new capacitive sensing devices has become easy and cost effective. Building on this, the CAPID project wants to develop ‘c-tokens’, that interact with these touchscreen and capacitive readers. C-tokens are thin and flexible, metal-oxide tags, integrated in paper and plastic products. The tags will send a d ...
Voir le projet

 7

 TERMINÉ 

PYroelectric Conformable SEnsor matrix for Large area applications in security and safety (PYCSEL)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

From government to consumer applications, personal identification is an ever increasing concern and demand. Fingerprints are the oldest and the most reliable features to be used because of their singularity and inalterability. The main goal of the PYCSEL project is to develop a low cost thin and large area fingerprint sensing surface enabling the personal identification via the development of a TO ...
Voir le projet

 9

 TERMINÉ 

Orchestration and Reconfguration Control Architecture (ORCA)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

ORCA offers experimentation facilities to promote wireless innovation in several market segments, including manufacturing, automotive industry, healthcare, ambient assistant living, public events, home automation, and utilities. Within the manufacturing market, for instance, application requirements vary from very low latency, up to real-time 3D video-driven interaction between collaborative robot ...
Voir le projet

 8

 TERMINÉ 

Silicon Nitride Photonic Integrated Circuit Pilot line for Life Science Applications in the Visible Range (PIX4LIFE)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

Photonics is essential in today’s life science technology. PIX4life will mature a state of the art silicon nitride (SiN) photonics pilot line for life science applications in the visible range and pave the way to make it accessible as an enabler for product development by a broad range of industrial customers. We aim at 1) establishing a validated CMOS compatible SiN technology platform in the vis ...
Voir le projet

 16

 TERMINÉ 

BROADBAND TUNABLE QCL BASED SENSOR FOR ONLINE AND INLINE DETECTION OF CONTAMINANTS IN WATER (AQUARIUS)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

AQUARIUS proposes disruptive improvements in laser based water sensing employing MIR quantum cascade lasers (QCLs). It is motivated byi) the EC Water Framework Directive (2000/60/EC) where hydrocarbons are identified as priority hazardous substances,ii) the industrial and regulatory need for fast and continuous detection of contaminants and iii) the current state-of-the-art of measuring these subs ...
Voir le projet

 9

 TERMINÉ 

MidInfraRed PHotonics devices fABrication for chemical sensing and spectroscopic applications (MIRPHAB)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

The MIRPHAB (Mid InfraRed PHotonics devices fABrication for chemical sensing and spectroscopic applications) consortium will establish a pilot line to serve the growing needs of European industry in the field of analytical micro-sensors. Its main objectives are to:• provide a reliable supply of mid-infrared (MIR) photonic components for companies incl. in particular SMEs already active in analytic ...
Voir le projet

 19

 TERMINÉ 

User Engagement for Large Scale Pilots in the Internet of Things (U4IoT)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

End-user and societal acceptance is critical to the success of the IoT large scale pilots. U4IoT combines complementary RRI-SSH expertise encompassing social and economic sciences, communication, crowdsourcing, living labs, co-creative workshops, meetups, and personal data protection to actively engage end-users and citizens in the large scale pilots. It will: • Develop toolkit for LSPs end-user e ...
Voir le projet

 9

 TERMINÉ 

Advanced aRchitectures for ultra-thin high-efficiency CIGS solar cells with high Manufacturability (ARCIGS-M)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2019,

Advanced aRchitectures for ultra-thin high-efficiency CIGS solar cells with high Manufacturability (ARCIGS-M)This project´s goal is advanced materials and nanotechnologies for novel CIGS PV device architectures with efficiencies ≥ 23.0 %, thus beyond that of the current state-of-the-art technologies. The technology targets the BIPV sector and enables several innovative solutions for BIPV.The novel ...
Voir le projet

 15

 TERMINÉ 

A Single Cell AnaLysis and Sorting Platform based on Lensfree digital imaging techniques applied to Rapid Detection of Cancer (SCALPEL)

Date du début: 1 nov. 2014, Date de fin: 31 oct. 2019,

"Metastasis is responsible for > 90% of cancer-related deaths. Billions of dollars have been spent trying to cure primary tumors but very little was spent in trying to detect or kill the highly aggressive tumor cells that cause disease spreading. One of the reasons is that single cell studies of rare cells in blood still present a large challenge. Single cell analysis remains tedious with many d ...
Voir le projet

 2

 TERMINÉ 

SynchroniCity: Delivering an IoT enabled Digital Single Market for Europe and Beyond (SynchroniCity)

Date du début: 1 janv. 2017, Date de fin: 30 sept. 2019,

SynchroniCity represents the first attempt to deliver a Single Digital City Market for Europe by piloting its foundations at scale in 11 reference zones - 8 European cities & 3 more worldwide cities - connecting 34 partners from 11 countries over 4 continents. Building upon a mature European knowledge base derived from initiatives such as OASC, FIWARE, FIRE, EIP-SCC, and including partners with le ...
Voir le projet

 35

 TERMINÉ 

Empowering Citizens to TrAnsform European PubLic Administrations (CITADEL)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

High quality public services constitute the backbone of citizens’ social welfare and are also essential to a region’s competitiveness and business entrepreneurship. Delivery of high quality public services is instrumental so that society and its economy can function. Despite this, the future provision of public services faces significant social challenges, as stated in H2020 “Understanding Europe ...
Voir le projet

 14

 TERMINÉ 

Next-generation interdigitated back-contacted silicon heterojunction solar cells and modules by design and process innovations (NextBase)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

The NextBase project, involving 8 research institutions and 6 companies, deals with the development of innovative high-performance c-Si solar cells and modules based on the interdigitated back-contacted silicon heterojunction (IBC-SHJ) solar cell concept targeting cells with efficiency above 26.0% and corresponding solar modules with efficiency above 22.0%. In particular, a number of new design an ...
Voir le projet

 15

 TERMINÉ 

Wireless Autonomous, Reliable and Resilient ProductIon Operation ARchitecture for Cognitive Manufacturing (AUTOWARE)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

Current practice is such that a production system is designed and optimized to execute the exact same process over and over again. The planning and control of production systems has become increasingly complex regarding flexibility and productivity, as well as the decreasing predictability of processes. The full potential of open CPS has yet to be fully realized in the context of cognitive autonom ...
Voir le projet

 16

 TERMINÉ 

EXTended Model of Organic Semiconductors (EXTMOS)

Date du début: 1 juil. 2015, Date de fin: 30 juin 2019,

EXTMOS’ main objective is to create a materials model and the related user friendly code that will focus on charge transport in doped organic semiconductors. Its aims are (i) to reduce the time to market of(a) multilayer organic light emitting devices, OLEDs, with predictable efficiencies and long lifetimes (b) organic thin film transistors and circuits with fast operation.(ii) to reduce productio ...
Voir le projet

 14

 TERMINÉ 

TCBL – Textile and Clothing Business LabsTransformative Business Models for the Textile Clothing Sector (TCBL)

Date du début: 1 juil. 2015, Date de fin: 30 juin 2019,

TCBL uses Europe’s Textiles & Clothing (T&C) industry as test beds for evolutionary-driven co-design, dynamic optimisation and deployment of business models. It aims to increase the performance of a sector that, over the past two decades, upheld three main strategies to handle global competitive pressure: cost-oriented, product/service-oriented and productivity-oriented. TCBL provides a business e ...
Voir le projet

 19

 TERMINÉ 

Integrated Technology Ecosystem for ProACTive Patient Centred Care (ProACT)

Date du début: 1 janv. 2016, Date de fin: 30 juin 2019,

ProACT targets Europe’s 50 million multimorbid patients to proactively self-manage and offset the EU’s annual €700billion cost of chronic disease management. ProACT aims at providing and evaluating an open application programming interface to integrate a variety of new and existing technologies to advance ‘home based’ integrated care (IC). Cloud based data analytics will determine correlations bet ...
Voir le projet

 14

 TERMINÉ 

Advancing Smart Optical Imaging and Sensing for Health (ASTONISH)

Date du début: 1 juin 2016, Date de fin: 31 mai 2019,

The ageing population and related increase in chronic diseases put considerable pressure on both the healthcare system and the society, resulting in an unsustainable rise of healthcare costs. As a result there is an urgent need to improve efficiency of care and reduce hospitalisation time in order to control cost and increase quality of life. Addressing this need, medical applications need to beco ...
Voir le projet

 25

 TERMINÉ 

Rf Engineered substrates to FostER fEm performaNCE (REFERENCE)

Date du début: 1 déc. 2015, Date de fin: 31 mai 2019,

The REFERENCE project aims to leverage a European leading edge Radio Frequency (RF) ecosystem based on RF Silicon On Insulator (SOI) disruptive technology, perceived as the most promising to address performance, cost and integration needs for RF Front End Modules (FEMs)s.The project targets to develop over the next 3 years, innovative solutions from material, engineered substrates, process, design ...
Voir le projet

 18

 TERMINÉ 

Flexible FE/BE Sensor Pilot Line for the Internet of Everything (IoSense)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2019,

The EU has set the stage to empower semiconductor manufacturing in Europe being one of the key drivers for innovation and employment and creator for answers to the challenges of the modern society. Aim of IoSense is to boost the European competitiveness of ECS industries by increasing the pilot production capacity and improving Time-to-Market for innovative microelectronics, accomplished by establ ...
Voir le projet

 33

 TERMINÉ 

Green Electronics with Diamond Power Devices (GreenDiamond)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2019,

The key to the efficient transmission and conversion of low-carbon electrical energy is the improvement of power electronic devices. Diamond is considered to be the ultimate wide bandgap semiconductor material for applications in high power electronics due to its exceptional thermal and electronic properties. Two recent developments - the emergence of commercially available electronic grade single ...
Voir le projet

 15

 TERMINÉ 

European Initiative to Enable Validation for Highly Automated Safe and Secure Systems (ENABLE-S3)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2019,

ENABLE-S3 will pave the way for accelerated application of highly automated and autonomous systems in the mobility domains automotive, aerospace, rail and maritime as well as in the health care domain. Virtual testing, verification and coverage-oriented test selection methods will enable validation with reasonable efforts. The resulting validation framework will ensure Europeans Industry competiti ...
Voir le projet

 76

 TERMINÉ 

Innovative e-environment for Research on Cities and the Media (I-Media-Cities)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2019,

I-Media-Cities is the initiative of 9 European Film Libraries, 5 research institutions, 2 technological providers and a specialist of digital business models to share access to and valorise audiovisual (AV) content from their collections for research purposes in a wide range of social sciences (sociology, anthropology, urban planning, etc). The project revolves around cities in European history an ...
Voir le projet

 19

 TERMINÉ 

3D Advanced Metrology and materials for advanced devices (3DAM)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2019,

The objective of the 3DAM project is to develop a new generation of metrology and characterization tools and methodologies enabling the development of the next semiconductor technology nodes. As nano-electronics technology is moving beyond the boundaries of (strained) silicon in planar or finFETs, new 3D device architectures and new materials bring major metrology and characterization challenges w ...
Voir le projet

 18

 TERMINÉ 

Ultra-Low PoweR technologIes and MEmory architectures for IoT (PRIME)

Date du début: 1 déc. 2015, Date de fin: 31 mars 2019,

The goal of the PRIME project is to establish an open Ultra Low Power (ULP) Technology Platform containing all necessary design and architecture blocks and components which could enable the European industry to increase and strengthen their competitive and leading eco-system and benefit from market opportunities created by the Internet of Things (IoT) revolution. Over 3 years the project will deve ...
Voir le projet

 19

 TERMINÉ 

Technology Advances and Key Enablers for 5 nm (TAKE5)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2019,

The TAKE5 project is the next in a chain of thematically connected ENIAC JU KET pilot line projects which are associated with 450mm/300mm development for the 10nm technology node and the ECSEL JU project SeNaTe aiming at the 7nm technology node. The main objective of the TAKE5 project is the demonstration of 5nm patterning in line with the industry needs and the ITRS roadmap in the Advanced Patter ...
Voir le projet

 13

 TERMINÉ 

Silicon Photonics Transceiver and Routing technologies for High-End Multi-Socket Server Blades with Tb/s Throughput interconnect interfaces (ICT-STREAMS)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2019,

The overall objective of STREAMS is to develop the necessary Silicon Photonics Transceiver and Routing technologies towards a new, power efficient, WDM-based, Tb/s, optical on-board interconnection paradigm that enables multiple high bandwidth, point-to-point direct links on the board level, as a step forward to the realization of exa-scale computing systems. Through the migration of successful WD ...
Voir le projet

 10

 TERMINÉ 

Metrology for future 3D-technologies (METRO4-3D)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2019,

Within the food chain of equipment delivery for the semiconductor industry, Europe has kept a very strong position in the metrology area with many companies establishing themselves as main leaders in the field. Hence in line with the objectives of the ICT25 call for innovation action to overcome the (initial) barriers for the successful commercialization of novel European products, this project a ...
Voir le projet

 9

 TERMINÉ 

Wafer scale Integration of Photonics and Electronics (WIPE)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2018,

The WIPE project aims at developing hybrid electronic-photonic chips as a key enabling technology for data transmission purposes. It aims at bringing photonics to a new level by developing a concept that can be well industrialised. This sustains EU leadership in photonics, as is the ambition of the work program. A new wafer-scale technology will thus be developed for direct and intimate attachme ...
Voir le projet

 10

 TERMINÉ 

Nanophotonics by Nanocrystals, from integration to single photon operation (Phonsi)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2018,

Phonsi is a research and training program on the development of nanophotonic devices by means of colloidal nanocrystals. Working at the cross-roads of nanomaterials and nanophotonics, it brings together multinational and start-up companies with universities and research institutes around a research programme combining the synthesis and analysis of quantum dots (QDs) with the formation of QD-based ...
Voir le projet

 7

 TERMINÉ 

NANOmaterials: STRategies for Safety Assessments in advanced Integrated Circuits Manufacturing (NanoStreeM)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2018,

Understanding properties of nanoparticles (and in general of nano-functionalized materials) and how they behave in living systems is a relatively new area of scientific study. The scientific community has not yet been able to derive harmful properties of nanomaterials from the properties of the bulk material. So a precautionary approach is required when handling and using these materials in circum ...
Voir le projet

 15

 TERMINÉ 

NEUral computing aRchitectures in Advanced Monolithic 3D-VLSI nano-technologies (NeuRAM3)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2018,

We propose to fabricate a chip implementing a neuromorphic architecture that supports state-of-the-art machine learning algorithms and spike-based learning mechanisms. With respect to its physical architecture this chip will feature an ultra low power, scalable and highly configurable neural architecture that will deliver a gain of a factor 50x in power consumption on selected applications compare ...
Voir le projet

 10

 TERMINÉ 

Generalised EMF Research using Novel Methods – an integrated approach: from research to risk assessment and support to risk management (GERONIMO)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2018,

The EU population is increasingly exposed to new physical and chemical agents in the environment, some of which may be detrimental to public health. Of these, electromagnetic fields (EMF) are one of the most ubiquitous, with new EMF technologies and novel applications being actively developed and commercialised. To address pertinent questions on EMF and health, GERoNiMO proposes an integrated appr ...
Voir le projet

 27

 TERMINÉ 

Wearable technologists Engage with Artists for Responsible innovation (WEAR)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2018,

Wearable technologies aimed at private consumers constitute a nascent market, expected to grow very fast. Their disruptive power is exemplified by the competition between established technology giants and start-ups. In particular, the development of the wearable market relies on its capacity to break down barriers between creative industries and digital technology companies. At the core of this ma ...
Voir le projet

 8

 TERMINÉ 

Adoptive Gateways for dIverse muLtiple Environments (AGILE)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2018,

AGILE project aims to create an open, flexible and widely usable IoT solution at disposal of industries (startups, SMEs, tech companies) and individuals (researchers, makers, entrepreneurs) as a framework that consists of:• A modular IoT gateway enabling various types of devices (wearables, home appliances, sensors, actuators, etc.) to be connected with each other and to the Internet;• Data manage ...
Voir le projet

 20