27 projets européens trouvés
Recherche sur 125080 projets européens
TERMINÉ
Developing a standard modularised solution for flexible and adaptive integration of heat recovery and thermal storage capable of recovery and management of waste heat (Smartrec)
Date du début: 1 sept. 2016, Date de fin: 31 août 2019,
Waste heat is a problem common to high temperature processing industries as a significantly underused resource, often due to challenges in economic heat valorisation. Secondary aluminium recycling and ceramic processing were identified as key examples with economically recoverable waste heat. Several challenges are inherent; these processes are batch-based rather than continuous with corrosive par ...
Voir le projet
9
Participants partenaires
TERMINÉ
Condition Monitoring of Wind Turbine Drive-Trains via Non-Contact Acoustic Sensors (CMDrive)
Date du début: 1 mars 2016, Date de fin: 28 févr. 2019,
The EU Agency for Safety & Health is currently amending wind turbine standards (such as EN 50308) to ensure safer O&M tasks and increase the Probability Of Detection (POD) for wind turbine defects. ISO have also identified such issues, and in fact initiated the development of QA standards specifically tailored for the Condition Monitoring (CM) of wind turbines. Current CM systems are intrusive, an ...
Voir le projet
5
Participants partenaires
TERMINÉ
Fully automated laser guided inspection robot for weld defect detection on ship hulls (ShipTest)
Date du début: 1 nov. 2016, Date de fin: 31 oct. 2018,
The European ship fleet counts 23,000 vessels, accounting for the 40% of the global gross tonnage. Marine industry is a major prosperity engine of the EU contributing a total of €147bn to the GDP and supporting more than 1.7m jobs. However, the vessels’ structural integrity verification is a major issue for the shipping industry. Regulations dictate that Non Destructive Testing (NDT) inspections s ...
Voir le projet
5
Participants partenaires
TERMINÉ
iPerm: Guided wave monitoring tool (iPerm)
Date du début: 1 oct. 2016, Date de fin: 30 sept. 2018,
Today, there are more than 40 major transnational oil and gas pipelines traversing Europe, accounting for over 34,565 km of strategically critical pipeline infrastructure, 40% of which are over 40 years old and subject to corrosion induced catastrophic failures impacting negatively upon European society and its economy. With such an extensive and growing network of pipelines, and a corollary incre ...
Voir le projet
5
Participants partenaires
TERMINÉ
Advanced shearography kit and a robotic deployment platform for on-site inspection of wind turbine blades (WInspector)
Date du début: 1 mars 2016, Date de fin: 28 févr. 2018,
To achieve a thorough investigation for defect presence on a wind turbine blade, close inspection is required. This implies either trained staff tied with ropes on the blade or dismantling and transferring the blade in a workshop environment. While blade dismantling is scarcely used because it requires very long downtime, human inspection also involve a relatively high delay. A solution to this pr ...
Voir le projet
5
Participants partenaires
TERMINÉ
Development of a Master Socket for optimised design of prosthetic socket for lower limb amputees (SocketMaster)
Date du début: 1 févr. 2015, Date de fin: 31 janv. 2018,
The function of a lower limb prosthetic is highly dependent upon the characteristics and anatomical profile of the residual limb. This is unique to each individual and changes depending on the activities being engaged in by the amputee. A poorly fitting prosthetic socket can cause significant trauma so it is important to consider how to optimise the fit to maximise the amputee's comfort whilst we ...
Voir le projet
9
Participants partenaires
TERMINÉ
Continuous structural condition tank integrity monitoring of Above Ground Storage Tanks, aka “SafeAST, no entry: no empty.” (SafeAST)
Date du début: 1 déc. 2015, Date de fin: 30 nov. 2017,
The purpose of this action is to assist the €2.8bn European and global liquid storage and distribution industry in reducing the costs involved in ensuring that leaks do not occur from 500,000 above ground storage tanks (ASTs), thus avoiding avoid damage to the environment and the loss of revenue from the unscheduled outages of leaking tanks, currently estimated at €132m. At its core is the explo ...
Voir le projet
5
Participants partenaires
TERMINÉ
Continuous monitoring of the structural condition of the tower and supporting structure of floating and static offshore wind turbines (TOWERPOWER)
Date du début: 1 mars 2014, Date de fin: 30 juin 2017,
There is a growing interest in monitoring techniques and systems which can provide information about the condition of a wind turbine support structure, owing to a number of operational factors which have become apparent as increased numbers of turbine installations are experiencing longer periods of time in service. These include:• Instances of fatigue cracking in the support towers• Flange bolts ...
Voir le projet
14
Participants partenaires
TERMINÉ
Flexible fabrication of lightweight aluminium transport structures (FlexiFab)
Date du début: 1 nov. 2013, Date de fin: 31 oct. 2016,
The Flexi-Fab project aims to develop a flexible FSW welding system capable of automatically fabricating complex structures, in a variety of joint configurations, from a range of aluminium alloy grades and thicknesses used in the transport sector.Flexi-Fab will deliver significant benefits to the metal working and fabrication industry by providing a cost-effective method of fabricating aluminium s ...
Voir le projet
11
Participants partenaires
TERMINÉ
A fully automatic method and apparatus for economical and long-lasting patching of potholes (HOLEINONE)
Date du début: 1 oct. 2014, Date de fin: 30 sept. 2016,
Pothole repair in road networks is one of the most commonly performed operation for most road maintenance teams, especially in areas where cold winters and wet springs contribute to accelerated road surface breakup ever year. The poor condition and lack of maintenance of European roads contribute to at least one third of all accidents each year, and accounting to 52.7% of fatalities in 2011. Potho ...
Voir le projet
7
Participants partenaires
TERMINÉ
Vortex Robot for Rapid Low Cost Scanning and Improved Non-Destructive Testing of Large Concrete Structures (VORTEXSCAN)
Date du début: 1 juil. 2014, Date de fin: 30 juin 2016,
Large public infrastructure facilities around the world like dams, cooling towers and bridges use cement as the main building material. Although made from a durable material many of these large assets have begun to age and are in need of periodic inspection to ensure their integrity. Current inspection routine involves setting up scaffolds that have to be moved around for personnel to reach to the ...
Voir le projet
8
Participants partenaires
TERMINÉ
Automated mechanical property and fatigue life assessment of composite wind turbine blades in less than 4 hours (AutoWinSpec)
Date du début: 1 mars 2014, Date de fin: 31 mai 2016,
The wind turbine industry is one of the fastest growing markets. Current turbines are huge with turbine rotor diameters of over 100m becoming standard. EU energy policy calls for 20% of the EU's 3040Th/y electricity demand to come from renewable sources by 2020, which constitutes a market of some 140€ billion and wind energy is the clear front runner.Presently in situ blade inspection is carried o ...
Voir le projet
9
Participants partenaires
TERMINÉ
Tyre Recycling Pyrolysis for producing oil with less than 0.2% sulphur content, low cost sulphur impregnated carbon for reducing mercury air emissions, with simultaneous elemental (SULFREE)
Date du début: 1 sept. 2013, Date de fin: 29 févr. 2016,
SULFREE offers a complete, end-to-end process for ELT recycling, which breaks down tyres to valuable productsthat can be reused by the EU tyre industry; instead of merely recycling them either as tyre crumb or as fuel (i.e.tyres are burned for power production). The recovery of oil and sulphur reduces the dependence on importedproducts and lessens the effect of price volatility on tyre production ...
Voir le projet
8
Participants partenaires
TERMINÉ
The development of a modular ‘stepping locomotion’ system for installation on subsea trenching machines used for subsea energy cable burial (HEXATERRA)
Date du début: 1 sept. 2013, Date de fin: 30 nov. 2015,
Offshore wind and tidal energy generation is becoming an increasingly important component of the world’s energy mix with Europe at the forefront of this technological revolution. Continued strong growth is predicted. However, a growing problem is manifesting itself within the industry.The submarine cables that are an essential infrastructural component of offshore energy now account for 80% of ins ...
Voir le projet
9
Participants partenaires
TERMINÉ
Medium range Ultrasonic inspection technique for detecting micro-biologically induced corrosion in automatic fire sprinkler systems (SPRINKTEST)
Date du début: 1 nov. 2013, Date de fin: 31 oct. 2015,
The installation of sprinklers can result in substantial reductions in insurance premiums and so insurance companies are becoming increasingly interested in their proper installation and function. For example, the British Automatic Fire Sprinkler Association has abundant evidence about the effectiveness of their members’ technology in reducing loss of life and property in office, residential, reta ...
Voir le projet
10
Participants partenaires
TERMINÉ
Development of a robust cost-effective collision awareness and avoidance system for ground support equipment operating on the airport ramp (RAMPAWARE)
Date du début: 1 mars 2013, Date de fin: 31 août 2015,
Even without taking into account expected increases in airport capacity, ground handling crews responsible for aircraft turnaround are already operating under time constraints and in highly congested areas, often in difficult weather conditions. The outcome is damage on an extraordinary scale, to the hugely expensive aircraft they are servicing. The direct cost of ground accidents involving Ground ...
Voir le projet
9
Participants partenaires
TERMINÉ
Advanced condition monitoring system for the assessment of wind turbines rotating parts (CMSWIND)
Date du début: 1 juin 2012, Date de fin: 31 mai 2015,
Current wind turbine condition monitoring methodologies can be time-consuming and a costly process and fail to achieve the reliability and operational efficiency required by the industry. For these reasons existing vibration-based Condition Monitoring System (CMS) usually fail to detect defects until they become critical.This project will show the applicability of the CMS enabling the prompt detec ...
Voir le projet
11
Participants partenaires
TERMINÉ
Ash Ingestion Detection Apparatus for aircraft (AIDA)
Date du début: 1 janv. 2013, Date de fin: 31 déc. 2014,
Aircraft frequently encounter volcanic ash when airborne. In the aftermath of these encounters, virtually the entire fuselage of an aircraft can be contaminated with ash, necessitating a thorough cleaning of the cockpit, instrument panel, circuit breaker panels, passenger and baggage compartments. The electrical and avionics units can be so heavily contaminated that complete replacement is necessa ...
Voir le projet
7
Participants partenaires
TERMINÉ
Detection of kissing bonds in friction stir welds in aero structures (StirScan)
Date du début: 1 déc. 2012, Date de fin: 30 nov. 2014,
The proposed StirScan project will develop a NDT system in order to address the challenging problem of detecting kissing bonds in Friction Stir Welds (FSW). FSW is a relatively new joining technique for aluminium alloys which offers good joint performance and excellent reproducibility – this is of significant interest to the aerospace sector, where fatigue performance is particular crucial. Howeve ...
Voir le projet
8
Participants partenaires
TERMINÉ
High Power Transmission Line Cable Inspection (CHAPLIN)
Date du début: 1 déc. 2012, Date de fin: 30 nov. 2014,
There are many thousands of miles of high power line transmission cables dispersed around Europe. Some are installed in remote areas where it’s difficult to serve. Furthermore, line cables operate in severe conditions. The cables are subject to many environmental and operation factors such as moisture, voltage stress, omitting jacking and structural imperfections.These factors are the main reasons ...
Voir le projet
7
Participants partenaires
TERMINÉ
In-situ wireless monitoring of on - and offshore WINd TURbine blades using energy harvesting technology - Demonstration (WINTUR DEMO)
Date du début: 1 sept. 2012, Date de fin: 31 août 2014,
"WINTUR Demonstration Project will demonstrate the structural health monitoring (SHM) system that was developed successfully in the WinTur R4S project, in order to show that such a system is viable for blade monitoring and can help the wind sector to achieve the kind of energy delivery to business and communities that is desired by reducing operational and maintenance costs. This will be achieved ...
Voir le projet
10
Participants partenaires
TERMINÉ
Development of Advanced Shearography System for On-Site Inspection of Wind Turbine Blades (DashWin)
Date du début: 1 oct. 2011, Date de fin: 31 mai 2014,
Wind energy is a fast growing (>20% pa) industry worldwide and European companies have two-thirds of the share, according to European Wind Energy Association. Due to the increase in wind farms, new techniques are required to provide maintenance and inspection of the wind installations with reduced cost and enhanced reliability. It is estimated that the business opportunity for wind turbine blade i ...
Voir le projet
10
Participants partenaires
TERMINÉ
Laser-guided inspection robot for the Non-Destructive Testing of thin steel gauge welds in the shipping industry (X-Scan)
Date du début: 1 oct. 2011, Date de fin: 30 nov. 2013,
Ocean going ships are the most cost effective form of transporting bulk goods around the world. To date, Europe owns nearly 40% of the world’s fleet of ships, which account for 90% of its external trade and 40% of its internal trade. Moreover, in the supply of ship building components and services, the EU is a world leader. As a result, the maritime industry, which includes ship building and ship ...
Voir le projet
8
Participants partenaires
TERMINÉ
FULLY AUTOMATIC SYSTEM FOR PICKING AND HANDLING MUSHROOMS FOR THE FRESH MARKET: FROM THE GROWING BED TO THE COOLING STORAGE (Champi-ON)
Date du début: 1 févr. 2011, Date de fin: 31 août 2013,
Mushroom growers are struggling to maintain benefit margins due to the globalization of agricultural markets, the increasing cost of raw materials/utilities and often the use of outdated and inefficient cultivation methods; it is no surprise that fresh mushrooms are often delivered under cost price, as manifested by SME participants. The consortium understands that technological innovation is the ...
Voir le projet
8
Participants partenaires
TERMINÉ
Development of a raising, walking and exercise device with upper body support for rehabilitation of stroke victims (WalkX)
Date du début: 1 janv. 2011, Date de fin: 31 mars 2013,
Stroke is the most common cause of adult disability in Europe. Roughly 75 % of the victims survive, but about half of these lose the ability to live independently in their own home. Rehabilitation and hospitalization represent a major economic burden for the EU of about €34Bn annually. Currently the annual incidence is approximately 2 per 1000 inhabitants in the EU, and the number is predicted to ...
Voir le projet
12
Participants partenaires
TERMINÉ
An ICT Enabled Approach to Optimising the Reliability of Manual Ultrasonic Non-destructive Testing (ICARUS)
Date du début: 1 janv. 2011, Date de fin: 31 déc. 2012,
"Manual Ultrasonic Non Destructive Testing is a long established and extensively adopted inspection technology, embedded in and vital to the integrity and performance management of capital assets in safety critical industries including aerospace, chemical processing and power generation. Of all available volumetric inspection systems, ultrasonic testing is recognised as providing the highest sensi ...
Voir le projet
10
Participants partenaires
TERMINÉ
Anaglyptic Refreshable Photo-Haptic Screen (Anagraphs)
Date du début: 1 janv. 2011, Date de fin: 31 déc. 2012,
The scientific and technological developments in the present research project will be to make possible the manufacture of an anaglyptic or tactile display that can be connected to a personal computer or used in stand-alone mode as a Braille e-book reader. The display may be read either by touch or indeed by sight, since the tactile dots will also be illuminated when active. This feature will be of ...
Voir le projet