Rechercher des projets européens

24 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

SUNlight-to-LIQUID: Integrated solar-thermochemical synthesis of liquid hydrocarbon fuels (SUN-to-LIQUID)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

Liquid hydrocarbon fuels are ideal energy carriers for the transportation sector due to their exceptionally high energy density and most convenient handling, without requiring changes in the existing global infrastructure. Currently, virtually all renewable hydrocarbon fuels originate from biomass. Their feasibility to meet the global fuel demand and their environmental impact are controversial. I ...
Voir le projet

 8

 TERMINÉ 

MEthane activation via integrated MEmbrane REactors (MEMERE)

Date du début: 1 oct. 2015, Date de fin: 30 sept. 2019,

The key objective of the MEMERE project is the design, scale-up and validation of a novel membrane reactor for the direct conversion of methane into C2H4 with integrated air separation. The focus of the project will be on the air separation through novel MIEC membranes integrated within a reactor operated at high temperature for OCM allowing integration of different process steps in a single multi ...
Voir le projet

 11

 TERMINÉ 

Flexible Hybrid separation system for H2 recovery from NG Grids (HyGrid)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2019,

The key objective of the HyGrid project is the design, scale-up and demonstration at industrially relevant conditions a novel membrane based hybrid technology for the direct separation of hydrogen from natural gas grids. The focus of the project will be on the hydrogen separation through a combination of membranes, electrochemical separation and temperature swing adsorption to be able to decrease ...
Voir le projet

 7

 TERMINÉ 

Development of a new and highly efficient micro-scale CHP system based on fuel-flexible gasification and a SOFC (FlexiFuel-SOFC)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2019,

The project aims at the development of a new innovative highly efficient and fuel flexible micro-scale biomass CHP technology consisting of a small-scale fixed-bed updraft gasifier, a compact gas cleaning system and a solid oxide fuel cell (SOFC). The technology shall be developed for a capacity range of 25 to 150 kW (fuel power) and shall be characterised by a wide fuel spectrum applicable (wood ...
Voir le projet

 8

 TERMINÉ 

Energy efficient MOF-based Mixed Matrix Membranes for CO2 Capture (M4CO2)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2017,

"The key objective of the M4CO2 project is to develop and prototype Mixed Matrix Membranes based on highly engineered Metal organic frameworks and polymers (M4) that outperform current technology for CO2 Capture (CO2) in pre- and post-combustion, meeting the energy and cost reduction targets of the European SET plan.By applying the innovative concept of M4 by a consortium of world key players, con ...
Voir le projet

 17

 TERMINÉ 

Advanced m-CHP fuel CELL system based on a novel bio-ethanol Fluidized bed membrane reformer (FLUIDCELL)

Date du début: 1 avr. 2014, Date de fin: 30 nov. 2017,

FLUIDCELL aims the Proof of Concept of an advanced high performance, cost effective bio-ethanol m-CHP FC system for decentralized off-grid, by improving technology developments from previous EU projects. The improvements will be achieved by development of a) better system integration using a fluidized bed catalytic membrane reactor working at low temperature (
Voir le projet

 9

 TERMINÉ 

Thermochemical HYDROgen production in a SOLar monolithic reactor: construction and operation of a 750 kWth PLANT (HYDROSOL-PLANT)

Date du début: 1 janv. 2014, Date de fin: 30 sept. 2017,

The HYDROSOL-PLANT project is expected to develop, verify and operate all of the tools required to scale up solar H2O splitting to the pilot (750 kWth) scale. The work will be based on the successful HYDROSOL series projects and mainly on the outcome of the current FCH-JU co-funded project, HYDROSOL-3D, dedicated to the provision of all main design specifications of such a pilot plant. HYDROSOL-PL ...
Voir le projet

 5

 TERMINÉ 

Joint Operation for Ultra Low Emission Shipping (JOULES)

Date du début: 1 juin 2013, Date de fin: 31 mai 2017,

Reducing emissions from shipping has increasingly become a challenge over the last years, both as a counter measure against global climate change and to protect local environments and population from waste, gas emissions and noise.This challenge has been documented both in policy papers, like the Europe 2020 initiative or the Transport White Paper, and in rules and regulations issued by IMO as wel ...
Voir le projet

 44

 TERMINÉ 

A Flexible natural gas membrane Reformer for m-CHP applications (FERRET)

Date du début: 1 avr. 2014, Date de fin: 31 mars 2017,

"The potential for fuel CHP units in Europe as a large market in the future is in general well recognised. Although the size of this market is large and is undisputed when the cost targets of m-CHP units is reached, it is often overlooked that it is a very segmented market. All micro-CHP units, as new heating appliances, will have to be certified against the Gas Appliance Directive (90/396/CE). Th ...
Voir le projet

 6

 TERMINÉ 

Diagnosis-aided control for SOFC power systems (DIAMOND)

Date du début: 1 avr. 2014, Date de fin: 31 mars 2017,

The DIAMOND project aims at improving the performance of solid oxide fuel cells (SOFCs) for CHP applications by implementing innovative strategies for on-board diagnosis and control. Advanced monitoring models will be developed to integrate diagnosis and control functions with the objective of having meaningful information on the actual state-of-the-health of the entire system. A holistic view ove ...
Voir le projet

 9

 TERMINÉ 

Solar integrated pressurized high temperature electrolysis (SOPHIA)

Date du début: 1 avr. 2014, Date de fin: 31 mars 2017,

Hydrogen and other fuels are expected to play a key role as energy carrier for the transport sector and as energy buffer for the integration of large amounts of renewable energy into the grid. Therefore the development of carbon lean technologies producing hydrogen at reasonable price from renewable or low CO2 emitting sources like nuclear is of utmost importance. It is the case of water electroly ...
Voir le projet

 10

 TERMINÉ 

ECO-efficient management of WAter in the MAnufacturing industry (ECOWAMA)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2016,

The ECOWAMA Project proposes a new eco-efficient closed cycle management model for the treatment of effluents of the metal and plastic surface processing industry (STM). Such STM waste water is extensively contaminated with oils and greases, organic loading, a salt fraction and especially with heavy metals (e.g. nickel, copper, zinc and others). Hence STM enterprises have high interest on efficien ...
Voir le projet

 11

 TERMINÉ 

Development of Auxiliary Power Unit for Recreational yachts (PURE)

Date du début: 1 janv. 2013, Date de fin: 30 juin 2016,

IIn Europe there is a very narrow technology base in portable fuel cell systems which can be applicable for various areas like emergency and remote power, recreational applications, personal portable power and educational devices. The PURE project targets these markets with the primary focus on maritime applications with a device, which will be portable, low weight and volume, based on improved HT ...
Voir le projet

 5

 TERMINÉ 

Electrochemical WAter treatment system in the dairy industry with hydroGEN REcovery and electricity production (REWAGEN)

Date du début: 1 juin 2012, Date de fin: 31 mai 2016,

The aim of the project is the development of a prototype of a water treatment system -based on the sequential combination of three technologies: electrocoagulation, electrooxidation and a technology for the recovery of generated hydrogen for energy saving and the reutilization of the resulting regenerated water for different applications - more efficient in terms of wastewater treatment and self-s ...
Voir le projet

 11

 TERMINÉ 

Industrial scale demonstration of sustainable algae cultures for biofuel production (ALL-GAS)

Date du début: 1 mai 2011, Date de fin: 30 avr. 2016,

This project will demonstrate on large scale the sustainable production of bio-fuels based on low-cost microalgae cultures. The full chain of processes from algal ponds to biomass separation, processing for oil and other chemicals extraction, and downstream biofuel production, as well as the use in vehicles, will be implemented on a 10 ha site.Depending on the methodology chosen during the researc ...
Voir le projet

 7

 TERMINÉ 

UNIQUE gasifier for hydrogen Production (UNIfHY)

Date du début: 1 sept. 2012, Date de fin: 31 mars 2016,

Through development and scale up activities on materials and reactors for the integration of advanced biomass steam gasification and syngas purification processes, UNIfHY aims to prove from a process, pilot and industrial scale point of view continuous pure hydrogen production from biomass, increase well-to-tank efficiency and contribute to a sustainable energy portfolio, exploiting results achiev ...
Voir le projet

 9

 TERMINÉ 

Advanced Multi-Fuel Reformer for Fuel Cell CHP Systems (ReforCELL)

Date du début: 1 févr. 2012, Date de fin: 31 déc. 2015,

Distributed power generation via Micro Combined Heat and Power (m-CHP) systems, has been proven to overcome disadvantages of centralized plant since it can give savings in terms of Primary Energy consumption and energy costs. The main advantage is that m-CHP systems are able to recover and use the heat that in centralized systems is often lost. Wide exploitation of these systems is still hindered ...
Voir le projet

 11

 TERMINÉ 

Design and Manufacturing of Catalytic Membrane Reactors by developing new nano-architectured catalytic and selective membrane materials (DEMCAMER)

Date du début: 1 juil. 2011, Date de fin: 30 juin 2015,

The DEMCAMER project proposes an answer to the paradigm met by the European Chemical Industry: increase the production rate while keeping the same products quality and reducing both production costs and environmental impacts. Through the implementation of a novel process intensification approach consisting on the combination of reaction and separation in a “Catalytic Membrane Reactor” single unit. ...
Voir le projet

 20

 TERMINÉ 

New Method for Superior Integrated Hydrogen Generation System 2+ (NEMESIS2+)

Date du début: 1 janv. 2012, Date de fin: 30 juin 2015,

...ft catalysts and the development of catalyst regeneration strategies. The liquid desulphurisation module will be connected to a reformer module based on a modified steam reforming technology owned by HyGear. By a subsequent water gas shift stage and a pressure swing adsorption unit a hydrogen purity of 5.0 (99,999 %) is achieved. In order to be able to run on liquid fuels as well as on off-gas fro ...
Voir le projet

 7

 TERMINÉ 

Low temperature hydrogen production from second generation biomass (HyTime)

Date du début: 1 janv. 2012, Date de fin: 30 juin 2015,

The aim of HyTime is to deliver a bioprocess for decentral H2 production from 2nd generation biomass with a productivity of 1-10 kg H2/d. The novel strategy in HyTime is to employ thermophilic bacteria which have shown superior yields in H2 production from biomass in the previous FP6 IP HYVOLUTION.Biomass in HyTime is grass, straw, molasses or unsold organic goods from supermarkets. The biomass is ...
Voir le projet

 9

 TERMINÉ 

Sustainable Hydrogen Evaluation in Logistics (SHEL)

Date du début: 1 janv. 2011, Date de fin: 30 juin 2014,

"Materials handling vehicles are currently powered by either electric motors based on lead-acid batteries or combustion engines employing diesel or liquefied petroleum gas. A number of disadvantages have been encountered with these current power systems and many efforts have been undertaken to find new ways to power the vehicles..Here, fuel cells offer advantages over the competing electrochemical ...
Voir le projet

 14

 TERMINÉ 

Advanced Electrolyser for Hydrogen Production with Renewable Energy Sources (ADEL)

Date du début: 1 janv. 2011, Date de fin: 31 déc. 2013,

The ADEL project (ADvanced ELectrolyser for Hydrogen Production with Renewable Energy Sources) proposes to develop a new steam electrolyser concept named Intermediate Temperature Steam Electrolysis (ITSE) aiming at optimizing the electrolyser life time by decreasing its operating temperature while maintaining satisfactory performance level and high energy efficiency at the level of the complete sy ...
Voir le projet

 13

 TERMINÉ 

Hybrid Membrane - Pressure Swing Adsorption (PSA) Hydrogen Purification Systems (Hy2Seps-2)

Date du début: 1 nov. 2011, Date de fin: 31 oct. 2013,

The main goal of the proposed work is the design and testing of hybrid separation schemes that combine membrane and Pressure Swing Adsorption (PSA) technology for the purification of H2 from a reformate stream that also contains CO2, CO, CH4, and N2. The general objectives comply with SP1-JTI-FCH.2010.2.3: “Development of gas purification technologies”, which is part of the application area SP1-JT ...
Voir le projet

 5

 TERMINÉ 

Scale Up of Thermochemical HYDROgen Production in a SOLar Monolithic Reactor: a 3rd Generation Design Study (HYDROSOL-3D)

Date du début: 1 janv. 2010, Date de fin: 31 déc. 2012,

"HYDROSOL-3D aims at the preparation of a demonstration of a CO2-free hydrogen production and provision process and related technology, using two-step thermochemical water splitting cycles by concentrated solar radiation. This process has been developed in the frame of EU co-financed projects within FP5 and FP6. From the initial idea over the proof of principle and over several steps of improvemen ...
Voir le projet

 5