Rechercher des projets européens

39 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Laser Lightning Rod (LLR)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

Controlling lightning is a long time dream of mankind. The goal of the present project is to investigate and develop a new type of lightning protection based on the use of upward lightning discharges initiated through a high repetition rate multi terawatt laser. The feasibility of the novel technique and the project’s prospect of success are based on recent research providing new insights into the ...
Voir le projet

 9

 TERMINÉ 

MAGnetic nanoparticle based liquid ENergy materials for Thermoelectric device Applications (MAGENTA)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

MAGENTA proposes a brand new technological path in thermoelectric materials research for waste-heat recovery applications. The originality of the project is based on the newly discovered thermal-to-electric energy conversion capacity of ionic-liquids and ferrofluids; i.e., colloidal dispersions of magnetic nanoparticles in ionic liquids (IL-FFs). It is an inter-disciplinary and cross-sector R&D pr ...
Voir le projet

 11

 TERMINÉ 

Heating and Cooling: Open Source Tool for Mapping and Planning of Energy Systems (HotMaps)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,

HotMaps will develop, demonstrate and disseminate a toolbox to support public authorities, energy agencies and planners in strategic heating and cooling planning on local, regional and national levels, and in-line with EU policies. The toolbox will facilitate the following tasks on a spatially disaggregated level: (1) Mapping heating and cooling energy situation including renewable and waste heat ...
Voir le projet

 16

 TERMINÉ 

Simulation Supported Real Time Energy Management in Building Blocks (Sim4Blocks)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2020,

The growing share of variable renewable energy necessitates flexibility in the electricity system, which flexible energy generation, demand side participation and energy storage systems can provide. SIMBLOCK will develop innovative demand response (DR) services for smaller residential and commercial customers, implement and test these services in three pilot sites and transfer successful DR models ...
Voir le projet

 17

 TERMINÉ 

Robust Internal Thermal Insulation of Historic Buildings (RIBuild)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2019,

RIBuild will strengthen the knowledge on how and under what conditions internal thermal insulation is to be implemented in historic buildings, without compromising their architectural and cultural values, with an acceptable safety level against deterioration and collapse of heavy external wall structures. The general objective of RIBuild is to develop effective, comprehensive decision guidelines t ...
Voir le projet

 10

 TERMINÉ 

Platform for Open Development of Systems of Artificial Intelligence (Bonseyes)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2019,

The Bonseyes project aims to develop a platform consisting of a Data Marketplace, Deep Learning Toolbox, and Developer Reference Platforms for organizations wanting to adopt Artificial Intelligence in low power IoT devices (“edge computing”), embedded computing systems, or data center servers (“cloud computing”). It will bring about orders of magnitude improvements in efficiency, performance, reli ...
Voir le projet

 15

 TERMINÉ 

Generalized Operational FLEXibility for Integrating Renewables in the Distribution Grid (GOFLEX)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,

The GOFLEX project will innovate, integrate, further develop and demonstrate a group of electricity smart-grid technologies, enabling the cost-effective use of demand response in distribution grids, increasing the grids’ available adaptation capacity and safely supporting an increasing share of renewable electricity generation. The GOFLEX smart grid solution will deliver flexibility that is both g ...
Voir le projet

 12

 TERMINÉ 

My Health - My Data (MH-MD)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,

Issues of data subjects’ privacy and data security represent a crucial challenge in the biomedical sector more than in other industries. The current IT landscape in this field shows a myriad of isolated, locally hosted patient data repositories, managed by clinical centres and other organisations, which are subject to frequent and massive data breaches. Patients are disenfranchised in this process ...
Voir le projet

 16

 TERMINÉ 

Road-, Air- and Water-based Future Internet Experimentation (RAWFIE)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2018,

The purpose of the RAWFIE initiative is to create a federation of different network testbeds that will work together to make their resources available under a common framework. Specifically, it aims at delivering a unique, mixed experimentation environment across the space and technology dimensions. RAWFIE will integrate numerous testbeds for experimenting in vehicular (road), aerial and maritime ...
Voir le projet

 13

 TERMINÉ 

Education and training in early detection of breast cancer for health care professionals

Date du début: 1 sept. 2015, Date de fin: 31 août 2018,

Background: Breast cancer detection should be carried out by a team involving a number of health professionals from various medical, nursing and allied health disciplines. Students from different health disciplines often have little idea of what each other’s roles entail. Interprofessional learning increase this knowledge, as well as giving students an understanding of the interpersonal skills nee ...
Voir le projet

 8

 TERMINÉ 

Development and implementation of Grouping and Safe-by-Design approaches within regulatory frameworks (NanoREG II)

Date du début: 1 sept. 2015, Date de fin: 31 août 2018,

One of the greatest challenges facing regulators in the ever changing landscape of novel nano-materials is how to design and implement a regulatory process which is robust enough to deal with a rapidly diversifying system of manufactured nanomaterials (MNM) over time. Not only does the complexity of the MNM present a problem for regulators, the validity of data decreases with time, so that the wel ...
Voir le projet

 46

 TERMINÉ 

DESIGN OF AN INNOVATIVE ENERGY-AWARE IT ECOSYSTEM FOR MOTIVATING BEHAVIOURAL CHANGES TOWARDS THE ADOPTION OF ENERGY EFFICIENT LIFESTYLES (ENTROPY)

Date du début: 1 sept. 2015, Date de fin: 31 août 2018,

Taking into account the fact that buildings constitute the largest end-use energy consuming sector, the design and development of solutions targeted at reducing their energy consumption based on the adoption of energy efficient techniques and the active engagement of citizens/occupants is considered crucial. Innovative solutions have to be implemented upon properly understanding the main energy co ...
Voir le projet

 9

 TERMINÉ 

Personalised Guidance Services for Optimising lifestyle in teen-agers through awareness, motivation and engagement (PEGASO)

Date du début: 1 déc. 2013, Date de fin: 31 mai 2017,

Obesity and other lifestyle-related illness are among the top healthcare challenges in Europe. Obesity alone accounts for up to 7% of healthcare costs in the EU, as well as wider economy costs associated with lower productivity, lost output and premature death. Obesity in younger age is an alarming predictor for obesity in adulthood, but also entails short term health complications in juvenile age ...
Voir le projet

 23

 TERMINÉ 

Operation of a Novel Sofc-battery Integrated hybrid for Telecommunication Energy systems (ONSITE)

Date du début: 1 juil. 2013, Date de fin: 31 mars 2017,

SOFCs are good energy sources to supply reliable power at steady state. Due to their slow internal electrochemical and thermodynamic characteristics, they cannot respond to electrical load transients as quickly as desired. During peak demand a battery can provide power in addition to the fuel cell, whereas the fuel cell can recharge the battery during low demand periods. The key advantage of this ...
Voir le projet

 8

 TERMINÉ 

Scalable Energy Management Infrastructure for Aggregation of Households (SEMIAH)

Date du début: 1 mars 2014, Date de fin: 28 févr. 2017,

...ak generation plants. The consortium of 12 partners from 4 different European countries, coming from ICT (Aarhus University, Centre Suisse D'Electronique et de Microtechnique, University of Agder and Haute Ecole Specialisee de Suisse Occidentale), Energy (Fraunhofer IWES, Agder Energi Nett, SEIC Teledis, EnAlpin, Misurio and Develco Products) and Telecommunications (Devoteam Solutions and netplus) ...
Voir le projet

 12

 TERMINÉ 

HYdropower plants PERformance and flexiBle Operation towards Lean integration of new renewable Energies (HYPERBOLE)

Date du début: 1 sept. 2013, Date de fin: 28 févr. 2017,

In the recent years due to tremendous development and integration of renewable energy resources in Europe, hydraulic turbines and pump-turbines are key technical components to contribute to renewable energy production and to compensate for the stochastic nature of the variable energy sources, preserving thus the electrical grid stability.As a result, the overarching objective of the project is the ...
Voir le projet

 10

 TERMINÉ 

Traditional Food Network to improve the transfer of knowledge for innovation (TRAFOON)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2016,

In the European Union, Small and Medium Enterprises (SMEs) of the food sector are increasingly under pressure due to developing open markets, increasing demand of standardized and price competitive food products by the consumers, rising importance of large retailers and challenges in obeying governmental regulations. This raises the risk of losing many traditional foods as well as traditional proc ...
Voir le projet

 31

 TERMINÉ 

Biopolymers from syngas fermentation (SYNPOL)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2016,

"SYNPOL aims to propel the sustainable production of new biopolymers from feedstock. SYNPOL will thereto establish a platform that integrates biopolymer production through modern processing technologies, with bacterial fermentation of syngas, and the pyrolysis of highly complex biowaste (e.g., municipal, commercial, sludge, agricultural). The R&D activities will focus on the integration of innovat ...
Voir le projet

 16

 TERMINÉ 

Biometrics Evaluation and Testing (BEAT)

Date du début: 1 mars 2012, Date de fin: 29 févr. 2016,

"Identity management using Biometrics is deployed in a growing number of applications ranging from identification platforms (e.g. biometric passports) to access control systems for border checks or banking transactions.Unfortunately, the reliability of these technologies remains difficult to compare. There are no european-wide standards for evaluating their accuracy, their robustness to attacks or ...
Voir le projet

 11

 TERMINÉ 

Social Innovation - Empowering the Young (SocIEtY) for the Common Good (SOCIETY)

Date du début: 1 janv. 2013, Date de fin: 31 déc. 2015,

“Social Innovation–Empowering the Young (SocIEtY) for the Common Good” will both focus on and integrate disadvantaged young people into the research process to improve their quality of life and to foster social innovation. Therefore SocIEtY will extend the given informational basis for designing and implementing policies to reduce inequalities by giving voice and opportunities for developing aspir ...
Voir le projet

 13

 TERMINÉ 

Strategies for the Improvement of Critical infrastructure Resilience to Electromagnetic Attacks (STRUCTURES)

Date du début: 1 juil. 2012, Date de fin: 31 oct. 2015,

Security and quality of life in industrialized countries depend on continuous and coordinate performance of a set of infrastructures (energy systems, ICT systems, transportation etc) which can be therefore defined “critical infrastructures” (CI).“STRUCTURES - Strategies for The impRovement of critical infrastrUCTUre Resilience to Electromagnetic attackS” aims at analyzing possible effects of elect ...
Voir le projet

 13

 TERMINÉ 

Nanotechnology based cochlear implant with gapless interface to auditory neurons (NANOCI)

Date du début: 1 sept. 2012, Date de fin: 31 août 2015,

Over 60 million of citizens in the EU suffer from hearing loss with its associated restrictions. In severe cases, hearing can only be restored by surgically implanting a neuroprosthesis called cochlear implant, which directly stimulates the auditory nerve.The bottleneck for optimal stimulation is caused by the anatomical gap between the electrode array and the auditory neurons in the inner ear. As ...
Voir le projet

 9

 TERMINÉ 

ORganic waste management by a small-scale Innovative automated system of anaerobic digestION (ORION)

Date du début: 1 août 2012, Date de fin: 31 juil. 2015,

Restaurants, hotels, markets, fisheries and other small to medium size agro-food industries have to manage 239 million tonnes of organic waste in Europe per year. The specific management of such waste, with respect to the legislative regulations of EU, involves costly treatment for SMEs and potential hygiene issues on site. ORION aims at allowing a vast majority of SMEs to manage their organic was ...
Voir le projet

 21

 TERMINÉ 

COntinuous Multi-parametric and Multi-layered analysis Of DIabetes TYpe 1 & 2 (Commodity12)

Date du début: 1 oct. 2011, Date de fin: 30 juin 2015,

In COMMODITY12 we will build a multi-layered multi-parametric infrastructure for continuous monitoring of diabetes type 1 and 2. The COMMODITY12 system will exploit multi-parametric data to provide healthcare workers and patients, with clinical indicators for the treatment of diabetes type 1 and 2. COMMODITY12 will focus on the interaction between diabetes and cardiovascular diseases. To address ...
Voir le projet

 11

 TERMINÉ 

VISual Concept Extraction challenge in RAdioLogy (VISCERAL)

Date du début: 1 nov. 2012, Date de fin: 30 avr. 2015,

VISCERAL is a support action that will organize two competitions on information extraction and retrieval involving medical image data and associated text that will benchmark the state of the art and define the next big challenges in large scale data processing in medical image analysis.The increasing amounts of medical imaging data acquired in clinical practice hold a tremendous body of diagnostic ...
Voir le projet

 5

 TERMINÉ 

Warehousing images in the digital hospital (WIDTH): interpretation, infrastructure, and integration (WIDTH)

Date du début: 16 mai 2011, Date de fin: 15 déc. 2014,

Advanced information communications technology (ICT) has created an expectation that the innovative use of ICT can deliver high quality healthcare to a situation where patients’ data can be supplied seamlessly to support clinical decisions. The world however has moved beyond the current reactive model and hamstrung by the problems of fragmentation and lack of coordination. Medical images are of a ...
Voir le projet

 7

 TERMINÉ 

Universal Integration of the Internet of Things through an IPv6-based Service Oriented Architecture enabling heterogeneous components interoperability (IoT6)

Date du début: 1 oct. 2011, Date de fin: 30 sept. 2014,

The IoT6 project aims at exploiting the potential of IPv6 and related standards (6LoWPAN, CORE, COAP, etc.) to overcome current shortcomings and fragmentation of the Internet of Things, in line with the CERP-IoT and EC recommendations.Its main challenges and objectives are to research, design and develop a highly scalable IPv6-based Service-Oriented Architecture to achieve interoperability, mobili ...
Voir le projet

 9

 TERMINÉ 

Knowledge Helper for Medical and Other Information users (KHRESMOI)

Date du début: 1 sept. 2010, Date de fin: 31 août 2014,

Description Collect and make sense of biomedical information, then makes it freely and easily available in several languagesKHRESMOI aims to develop a multi-lingual multi-modal search and access system for biomedical information and documents. This will be achieved by:- Effective automated information extraction from biomedical documents, ...
Voir le projet

 13

 TERMINÉ 

Education as Welfare - Enhancing opportunities for socially vulnerable youth in Europe (EDUWEL)

Date du début: 1 janv. 2010, Date de fin: 31 août 2014,

The ITN 'Education as Welfare - Enhancing opportunities for socially vulnerable youth in Europe' aims to consolidate research on education and welfare and evaluate its capacity to tackle the multiple challenges and pressures a large proportion of young people in Europe faces. In examining the welfare dimensions of educational settings and the educational dimensions of welfare services, it integrat ...
Voir le projet

 11

 TERMINÉ 

Network for EXchange and PRototype Evaluation of photonicS componentS and Optical systems (Nexpresso)

Date du début: 1 juin 2010, Date de fin: 28 févr. 2014,

NEXPRESSO creates and implements a network for evaluation by researchers of prototype photonics components and systems manufactured by SMEs, at no net cost to either the university or the SME. As a result, students are trained on the next generation of emerging technologies and products as identified by European industries. This training orients students toward advanced technology jobs in Europe, ...
Voir le projet

 10

 TERMINÉ 

PARYLENE based artificial smart LENSes fabricated using a novel solid-on-liquid deposition process (PARYLENS)

Date du début: 1 oct. 2010, Date de fin: 30 sept. 2013,

The main goal of the project PARYLENS is to develop the next generation optical devices, based on an innovative and reliable concept inspired by natural optical systems such as the human and the fly eyes. We propose the following devices to the European citizen and industry: 1) tuneable lenses 2) truly accommodative intraocular lenses 3) bistable flexible displays The development of those devices ...
Voir le projet

 13

 TERMINÉ 

Participative Research labOratory for Multimedia and Multilingual Information Systems Evaluation (PROMISE)

Date du début: 1 sept. 2010, Date de fin: 31 août 2013,

Description Advancing the Evolution and Benchmaking of Multimedia and Multilingual Information SystemMeasuring is a key to scientific progress. This is particularly true for research concerning complex systems, whether natural or human-built. Multilingual and multimedia information systems are increasingly complex: they need to satisfy di ...
Voir le projet

 15

 TERMINÉ 

Coordinated approacH to the EurOpean effoRt on aUdio-visual Search engines (CHORUS +)

Date du début: 1 janv. 2010, Date de fin: 31 déc. 2012,

CHORUS+ creates the conditions for mutual information exchange and cross fertilization between the FP7 projects in the Search Engine domain and the national and international initiatives running in this area. The CHORUS+ project aims to foster timely discussion and avoid fragmentation. Discussion groups with selected experts and representatives from industry, academia, and research organizations ...
Voir le projet

 10

 TERMINÉ 

Making Capabilities Work (WorkAble)

Date du début: 1 nov. 2009, Date de fin: 31 oct. 2012,

“Making Capabilities Work” (WorkAble) will scrutinise strategies to enhance the social sustainability and economic competitiveness of Europe by strengthening the capabilities of young people to actively shape their personal and work lives in knowledge societies and cope with today's economic, cultural, demographic and technological challenges. Bridging quantitative and qualitative methods ...
Voir le projet

 13

 TERMINÉ 

Detecting and Eliminating Bacteria UsinG Information Technologies (DebugIT)

Date du début: 1 janv. 2008, Date de fin: 30 juin 2012,

Description For infectious diseases DebugIT detects patient safety related patterns and trends, acquires knowledge and uses this for better quality healthcare In about half a century of antibiotic use, unexpected new challenges have come to light: fast emer-gence of resistances among pathogens, mi ...
Voir le projet

 14

 TERMINÉ 

Invivo Ultrasonic Transponder System for Biomedical Applications (ULTRAsponder)

Date du début: 1 sept. 2008, Date de fin: 31 mars 2012,

The key objective of ULTRAsponder is to develop a novel telemetry technology for biomedical applications that will enable any kind of deeply implanted device (the transponder) to communicate and be powered wirelessly via acoustic waves with the external system (the control unit). The implanted transponder will include one or more sensors for monitoring a variety of parameters, such as temperature, ...
Voir le projet

 10

 TERMINÉ 

"Health systems and long-term care for older people in Europe – Modelling the INTERfaces and LINKS between prevention, rehabilitation, quality of services and informal care" (INTERLINKS)

Date du début: 1 nov. 2008, Date de fin: 31 déc. 2011,

"The objective of this 3-year project is to construct and validate a general model to describe and analyse long-term care (LTC) systems for older people from a European perspective. The particular aspects of the different emerging national models that currently address long-term care needs in Europe will be used to show how the links to health care services, the quality of LTC services, the incent ...
Voir le projet

 16

 TERMINÉ 

The PharMEA Platform: Multi-Electrode Array technology based platform for industrial pharmacology and toxicology drug screening (PharMEA)

Date du début: 1 sept. 2009, Date de fin: 30 nov. 2011,

The project PharMEA is based on the technology platform of multi-electrode arrays, which have been widely used for electrophysiological experiments on neuronal and cardiac tissues. Some of the key advantages of MEA technology include ease of use, non-invasive measurements and simultaneous multi-site recording & stimulation capability. Despite these key advantages, MEA technology utilization has re ...
Voir le projet

 7

 TERMINÉ 

Corrosion protection with perfect atomic layers (CORRAL)

Date du début: 1 sept. 2008, Date de fin: 31 août 2011,

The aim of this project is to develop high density defect-free ultra-thin sealing coatings with excellent barrier properties and improved corrosion resistance. Their successful functioning will be provided by the synergy of the coating “perfect” morphology and its complex structural design, which can be tailored at the nanoscale. The study will be focused on development of novel nanostructured coa ...
Voir le projet

 15