Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Internet of Food and Farm 2020 (IoF2020)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

The IoF2020 project is dedicated to accelerate adoption of IoT for securing sufficient, safe and healthy food and to strengthen competitiveness of farming and food chains in Europe.It will consolidate Europe’s leading position in the global IoT industry by fostering a symbiotic ecosystem of farmers, food industry, technology providers and research institutes.The IoF2020 consortium of 73 partners, ...
Voir le projet

 72

 TERMINÉ 

Integrating National Research Agendas on Solar Heat for Industrial Processes (INSHIP)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

Despite process heat is recognized as the application with highest potential among solar heating and cooling applications, Solar Heat for Industrial Processes (SHIP) still presents a modest share of about 0.3% of total installed solar thermal capacity. As of today’s technology development stage – economic competitiveness restricted to low temperature applications; technology implementation requiri ...
Voir le projet

 32

 TERMINÉ 

Advanced Materials technologies to QUADRUPLE the Concentrated Solar Thermal current POWER GENERATION (IN-POWER)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

The benefits of high efficiency concentrated solar power (CSP) and photovoltaic (PV) are well known: environmental protection, economic growth, job creation, energy security. Those technologies can only be applied properly in regions with annual mean radiation values higher than 1750 kWh/m2 per year. CSP has advantages in front of PV: possible 24h continuous electricity production, electricity and ...
Voir le projet

 11

 TERMINÉ 

MOdular high concentration SolAr Configuration (MOSAIC)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2020,

MOSAIC project aims to exceed the goal of the Strategic Energy Technology (SET) Plan - European Commission of producing CSP electricity at a cost below 0.10 €/kWh. To exceed this goal a commercial CSP plant of > 1GW of nominal capacity is foreseen, in which high nominal capacity of CSP plant is reached in a modular way where each MOSAIC module delivers thermal energy to linked thermal energy stor ...
Voir le projet

 9

 TERMINÉ 

Balancing Human and Automation Levels for the Manufacturing Workplaces of the Future (MANUWORK)

Date du début: 1 oct. 2016, Date de fin: 31 mars 2020,

Future manufacturing will be characterized by the complementarity between humans and automation, especially regarding the production of highly customizable products. This requires new methods and tools for the design and operation of optimized manufacturing workplaces in terms of ergonomics, safety, efficiency, complexity management and work satisfaction. MANUWORK aims to focus on the development ...
Voir le projet

 13

 TERMINÉ 

Antimicrobial FLEXible POLymers for its use in hospital environments (FLEXPOL)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

FLEXPOL aims to develop a pilot line for the production of a cost effective antimicrobial (AM) adhesive film for its use in hospitals. The obtained adhesive film will inhibit growth of a wide range of microbes and will be suitable for high-touch surfaces, providing a durable protection with good resistance. It will assure the highest level of hygiene and patient safety, reducing the use of disinfe ...
Voir le projet

 11

 TERMINÉ 

Water Saving for Solar Concentrated Power (WASCOP)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

Concentrating Solar Power is one of the most promising and sustainable renewable energy and is positioned to play a massive role in the future global generation mix, alongside wind, hydro and solar photovoltaic technologies. Although there is definitely perspective for the technology for rapid grow, success of CSP will ultimately rely on the ability to overcome obstacles that prevent its mass adop ...
Voir le projet

 11

 TERMINÉ 

Adaptive Automation in Assembly For BLUE collar workers satisfaction in Evolvable context (A4BLUE)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

Sectors such as aerospace, automotive, wind power, capital goods are characterised, on the one hand, by complex products and small scale production that require high flexibility and on the other hand by an increasing pressure to raise productivity rates. Furthermore manufacturing systems need to deal with an ever-changing environment due to short term changes caused by human or production related ...
Voir le projet

 9

 TERMINÉ 

Wireless Autonomous, Reliable and Resilient ProductIon Operation ARchitecture for Cognitive Manufacturing (AUTOWARE)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

Current practice is such that a production system is designed and optimized to execute the exact same process over and over again. The planning and control of production systems has become increasingly complex regarding flexibility and productivity, as well as the decreasing predictability of processes. The full potential of open CPS has yet to be fully realized in the context of cognitive autonom ...
Voir le projet

 16

 TERMINÉ 

Collaborative RObotic Solution for Advanced Inspection of Complex Composite parts (CRO-INSPECT)

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

Highly integrated composite parts have begun to enter the market. Their inherent complex structure makes more difficult inspection activities being crucial the development of more flexible, more reliable and faster NDT solutions. Regarding NDT methods, Ultrasonic testing (UT) techniques are suitable for the inspection of large and hidden areas and recently developed ones, like guided waves, have ...
Voir le projet

 3

 TERMINÉ 

Highly Innovative building control Tools Tackling the energy performance GAP (HIT2GAP)

Date du début: 1 sept. 2015, Date de fin: 31 août 2019,

Measurement campaigns have shown major discrepancies in buildings energy performance between planned energy demand and real energy consumption, while nowadays most of the newly constructed offices buildings are equipped with BMS systems, integrating a more or less extended measurement layer providing large amounts of data. Their integration in the building management sector offers an improvement c ...
Voir le projet

 23

 TERMINÉ 

New generation of Intelligent Efficient District Cooling systems (INDIGO)

Date du début: 1 mars 2016, Date de fin: 31 août 2019,

In Europe, different prognosis show an increase in cooling demand of almost 60% in 2030 with respect to nowadays. District cooling (DC) can play a part in satisfying this demand in a sustainable way (since can offer 5 to 10 times higher efficiency solutions than on‐site stand‐alone distributed systems). Even if DC captures only minor portion of the prospective market, this will translate into a dr ...
Voir le projet

 6

 TERMINÉ 

smart WINg panels for Natural laminar flow with functional Erosion Resistant COATings (WINNER)

Date du début: 1 juil. 2016, Date de fin: 30 juin 2019,

Surface characteristics such as smoothness and other geometrical surface are conditions that wing panels have to accomplish in order to have an aerodynamic profile for efficient wing with natural laminarity. Besides these surface and geometrical requirements there are other functionalities that are critical to the overall performance of the wing and the platform. The increasing need to reduce weig ...
Voir le projet

 1

 TERMINÉ 

Ultralight and ultrasafe adaptable 3-wheeler (WEEVIL)

Date du début: 1 juin 2015, Date de fin: 31 mai 2019,

L category vehicles should answer the demands for less energy consumption and affordability and represent an attractive solution in congested cities with scarce parking space. WEEVIL aims to develop a new L category 3-wheeler that is quiet, clean, energy efficient and safe, as well as attractive to the public so that the barriers for adopting it are minimized. The new vehicle concept is an ultrali ...
Voir le projet

 11

 TERMINÉ 

Competitive SolAr Power Towers – CAPTure (CAPTure)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2019,

The main objective of this project is to significantly reduce costs of concentrated solar power, in order to pave the way for its deserved competitiveness on the power market. Specifically, the solar-to-electric conversion efficiency of the plant will be improved by increased receiver operating temperatures as well as an innovative power cycle configuration also providing advantages regarding plan ...
Voir le projet

 16

 TERMINÉ 

Erosion and Ice Resistant cOmposite for Severe operating conditions (EIROS)

Date du début: 8 mars 2016, Date de fin: 7 mars 2019,

In the wind power generation, aerospace and other industry sectors there is an emerging need to operate in the low temperature and highly erosive environments of extreme weather conditions. Such conditions mean current materials either have a very short operational lifetime or demand such significant maintenance as to render many applications either very expensive to operate or in some cases non-v ...
Voir le projet

 18

 TERMINÉ 

Technological and Methodological Solutions for Integrated Wide Area Situation Awareness and Survivor Localisation to Support Search and Rescue Teams (INACHUS)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2018,

Crisis incidents result in difficult working conditions for Urban Search-and-Rescue (USaR) crews. INACHUS aims to achieve a significant time reduction and increase efficiency in USaR operations by providing:1.Simulation tools for estimating the locations of survival spaces (after a structural collapse) and identify the location of survivors for different construction types and building materials2. ...
Voir le projet

 21

 TERMINÉ 

Innovative sealing and sensing technologies for extended life of lubricated elements. (ISSELUB)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2018,

The overall goal of the project is focused on incrementing the efficiency of Electro-Mechanical and Electro-Hydrostatic systems in terms of extending the life and improving the reliability and enhancing the performance of the maintenance activities of wing actuation systems. With this objective in mind, the activities within the project have been oriented to the following goals:To investigate inno ...
Voir le projet

 1

 TERMINÉ 

Towards a EU framework for the security of Widezones (ZONESEC)

Date du début: 1 déc. 2014, Date de fin: 30 nov. 2018,

The advancement of 24/7 surveillance systems for the security of WideZones with multiple assets at localized scales is of extreme strategic relevance to European economies, industries, authorities and Citizens. Nevertheless, the cost for large deployments and maintenance of ground sensing networks for local surveillance across these WideZones is extremely high. Hence, large areas of high economic ...
Voir le projet

 19

 TERMINÉ 

Learning Advanced Industrial Technologies 4.0 to upgrade the skills of VET teachers as drivers of innovation in SMEs

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2018,

Industry 4.0. is the name given to the last industrial revolution, which is based in new ways of interaction among people, machines and data, combining the real world of production with the virtual world of information and communication technology.In order to establish industry 4.0. in a company, it is necessary to count with workers with the skills to meet the requirements of this new approach. I ...
Voir le projet

 6

 TERMINÉ 

European Clearing House for Open Robotics Development Plus Plus (ECHORD Plus Plus)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2018,

Description ECHORD++ will create new opportunities for European robotics researchers to work directly with SME/start-ups and new users/customers to create innovative products. ECHORD++ will continue ECHORD’s two pillars, “experiments” and “structured dialogue”, taking advantage of experience and investment in the infrastructure. In addition, ...
Voir le projet

 68

 TERMINÉ 

Twin-model based virtual manufacturing for machine tool-process simulation and control (TWIN-CONTROL)

Date du début: 1 oct. 2015, Date de fin: 30 sept. 2018,

Europe is the world’s largest manufacturer of machine tools but this position is threatened due to the emergence of Asian countries. However, Europe has world-class capabilities in the manufacture of high-value parts for such competitive sectors like aerospace & automotive and this has led to the creation of a high-technology, high-skill industry. European machine tool builders, part manufacturers ...
Voir le projet

 12

 TERMINÉ 

Sustainable Production of Industrial Recovered Energy using energy dissipative and storage technologies (SUSPIRE)

Date du début: 1 oct. 2015, Date de fin: 30 sept. 2018,

SusPIRE project assimilates in its conception the sustainable energy use challenge described in the European SETPLAN and in SPIRE road map. It addresses its efforts to energy intensive industries and within this segment market to energy recovery from residual heat streams. To achieve this goal a two clearly differentiated working areas will be key aspects of this project. Technology area will in ...
Voir le projet

 9

 TERMINÉ 

High Strength Bearing for Large-Bore LEAD FREE Engines (BeLEADFREE)

Date du début: 1 juin 2016, Date de fin: 31 mai 2018,

Lead (Pb) is a heavy metal very harmful to health and the environment. Lead is particularly harmful to children resulting in 600,000 new cases of children with intellectual disabilities every year due to Lead exposure. Cost-benefit analysis suggests that, in France alone, overall benefit of €22.72 billion/year could be achieved in terms of avoiding future medical interventions, limiting the need f ...
Voir le projet

 4

 TERMINÉ 

Cyber Physical System based Proactive Collaborative Maintenance (MANTIS)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2018,

The overall concept of MANTIS is to provide a proactive maintenance service platform architecture based on Cyber Physical Systems that allows to estimate future performance, to predict and prevent imminent failures and to schedule proactive maintenance. Maintenance is no longer a necessary evil that costs what it costs, but an important function that creates additional value in the business proces ...
Voir le projet

 47

 TERMINÉ 

Scientific and Technological Alliance for Guaranteeing the European Excellence in Concentrating Solar Thermal Energy (STAGE-STE)

Date du début: 1 févr. 2014, Date de fin: 31 janv. 2018,

Concentrating Solar Thermal Energy encompasses Solar Thermal Electricity (STE), Solar Fuels, Solar Process Heat and Solar Desalination that are called to play a major role in attaining energy sustainability in our modern societies due to their unique features: 1) Solar energy offers the highest renewable energy potential to our planet; 2) STE can provide dispatchable power in a technically and eco ...
Voir le projet

 42

 TERMINÉ 

Novel combination of biopolymers and manufacturing technologies for production of a peripheral nerve implant containing an internal aligned channels array (NEURIMP)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2017,

"Peripheral nerves are basic communication structures guiding motor and sensitive information from CNS to effector or receptor units. Severe nerve injuries include axon bundles section and Schawnn cells destruction, which results in loss of motion control and sensorial perception. After the lesion, cells present in damaged nerves activate spontaneously self-regeneration programs that might facilit ...
Voir le projet

 8

 TERMINÉ 

Highly customizable robotic solutions for effective and safe human robot collaboration in manufacturing applications (FourByThree)

Date du début: 1 déc. 2014, Date de fin: 30 nov. 2017,

Industrial robots have demonstrated their capacity to answer the needs of many industrial applications, offering a high degree of dexterity, accuracy and efficiency.However, when the application requires the collaboration between the robot and the worker, including workspace sharing, it is not feasible to use standard industrial robots due to safety being compromised Recently, new robotic products ...
Voir le projet

 16

 TERMINÉ 

EURO-MEDITERRANEAN COOPERATION ON RESEARCH & TRAINING IN SUN BASED RENEWABLE ENERGIES (EUROSUNMED)

Date du début: 1 sept. 2013, Date de fin: 31 août 2017,

The scientific targets of the EUROSUNMED project are the development of new technologies in three energy field areas, namely photovoltaics (PV), concentrated solar power (CSP) and grid integration (GI), in strong collaboration with research institutes, universities and SMEs from Europe in the north side of the Mediterranean sea and from Morocco and Egypt from the south of the sea. The focus in PV ...
Voir le projet

 18

 TERMINÉ 

The Alliance for Materials way to the creation of the MATerials Common House - MATCH (MATCH)

Date du début: 1 janv. 2015, Date de fin: 30 juin 2017,

"With this proposal, a qualified and assorted representative group of the European Materials community, intend to propose an activity for further boosting and reinforcing a concept launched by Alliance for Materials (A4M): the creation of a strong, sustainable, inclusive network where any European Materials players (from Industry, Research, University) could feel comfortable and can gain real val ...
Voir le projet

 20

 TERMINÉ 

"Seamless Human-Robot Cooperation for Intelligent, Flexible and Safe Operations in the Assembly Factories of the Future" (ROBO-PARTNER)

Date du début: 1 nov. 2013, Date de fin: 30 avr. 2017,

"Human skills are the main driver that enables producing high added value products in Europe. Thus the manufacturing processes are based on utilizing these skills. ROBO-PARTNER aspires the integration of the latest industrial automation systems for assembly operations in combination with human capabilities, combining robot strength, velocity, predictability, repeatability and precision with human ...
Voir le projet

 14

 TERMINÉ 

Shape-engineered TiO2 nanoparticles for metrology of functional properties: setting design rules from material synthesis to nanostructured devices (SETNanoMetro)

Date du début: 1 déc. 2013, Date de fin: 31 mars 2017,

According to European Commission [EC, COM (2012) 572, 3.10.2012] important challenges at European level are related to the establishment of validated method and instrumentation for detection, characterization and analysis of nanoparticles.In the framework of the SETNanometro project, the use of various measurement techniques for the determination of the NPs properties will allow to move from the c ...
Voir le projet

 16

 TERMINÉ 

Dependable Embedded Wireless Infrastructure (DEWI)

Date du début: 1 mars 2014, Date de fin: 28 févr. 2017,

DEWI (dependable embedded wireless infrastructure) envisions to significantly foster Europe’s leading position in embedded wireless systems and smart (mobile) environments such as vehicles, railway cars, airplanes and buildings. These environments comprise wireless sensor networks and wireless applications for citizens and professional users. Therefore the consortium introduces the concept of a “s ...
Voir le projet

 61

 TERMINÉ 

A common European approach to the regulatory testing of nanomaterials (NANOREG)

Date du début: 1 mars 2013, Date de fin: 28 févr. 2017,

The innovative and economic potential of Manufactured Nano Materials (MNMs) is threatened by a limited understanding of the related EHS issues. While toxicity data is continuously becoming available, the relevance to regulators is often unclear or unproven. The shrinking time to market of new MNM drives the need for urgent action by regulators. NANoREG is the first FP7 project to deliver the answe ...
Voir le projet

 73

 TERMINÉ 

Arrowhead (ARROWHEAD)

Date du début: 1 mars 2013, Date de fin: 28 févr. 2017,

"Our society is facing both energy and competitiveness challenges. These challenges are tightly linked and require new dynamic interactions between energy producers and energy consumers, between machines, between systems, between people and systems, etc. Cooperative automation is the key for these dynamic interactions and is enabled by the technology developed around the Internet of Things and Ser ...
Voir le projet

 87

 TERMINÉ 

Development of safe and resilient flooring with controlled slip under varying environments (SLIPSAFE)

Date du début: 1 févr. 2014, Date de fin: 31 janv. 2017,

The production and installation of resilient flooring in public and private buildings is a major business in Europe involving various sectors including material and coating production, designers, architects, installers, cleaners as well as the end-users. The main requirements are: durability, ease of installation, optical appearance, ease of cleaning and low cost maintenance.On the other hand slip ...
Voir le projet

 14

 TERMINÉ 

A Synergetic Training Network on Energy beam Processing: from Modelling to Industrial Applications (STEEP)

Date du début: 15 janv. 2013, Date de fin: 14 janv. 2017,

"With the use of more advanced, but difficult-to-cut materials, on ever-more sophisticated products, the need to further develop and utilise the particular capabilities of the energy beam (EB) processing techniques seem to become a key enabler for the European industry. Although they are of various nature, a set of key communalities can be identified among EB methods when considered as dwell-time ...
Voir le projet

 11

 TERMINÉ 

Cooperate, Communicate and Connect to boost smart Components for tomorrows Industry (Co-FACTOR)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2016,

Co-FACTOR aims at speeding-up the industrial up-take of results of the FoF projects I-Ramp3, ReBORN, SelSus, T-Rex, INTEFIX and Power-OM , whose common topic centers around “smart components”. While the prime focus is on gaining benefit for these projects, the proposed measures also seek to link with program level initiatives in a complementary way. Positioning these projects in the core of a la ...
Voir le projet

 6

 TERMINÉ 

Reinforced Bioresorbable Biomaterials for Therapeutic Drug Eluting Stents (REBIOSTENT)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2016,

Active therapeutic biodegradable and biocompatible materials are highly in demand. These are required for the production of medicinal products in a variety of areas including implant technology, tissue engineering, drug delivery and wound healing. Within implant technology such biomaterials can be used for dental, bone and cardiovascular implants. Tailored mechanical properties, biocompatibility a ...
Voir le projet

 14

 TERMINÉ 

Switched/Synchronous Reluctance Magnet-free Motors for Electric Vehicles (VENUS)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2016,

"For a large scale introduction of Electric Vehicles (EV) in Europe, adequate volume supply of current PM based motors could be at risk, as the rare earth metals they contain can only be found under single source monopolies. In this context, the development of high efficiency motors using a limited amount of permanent magnets or completely new magnet-free motor designs is crucial. A promising opti ...
Voir le projet

 6