Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Federation for FIRE Plus (Fed4FIREplus)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2021,

The Fed4FIRE+ project has the objective to run and further improve Fed4FIRE’s “best-in-town” federation of experimentation facilities for the Future Internet Research and Experimentation initiative. Federating a heterogeneous set of facilities covering technologies ranging from wireless, wired, cloud services and open flow, and making them accessible through common frameworks and tools suddenly op ...
Voir le projet

 24

 TERMINÉ 
Many technologically and societally important mathematical problems are intractable for conventional, serial computers. Therefore, a significant need exists for parallel-computing approaches that are capable to solve such problems within reasonable time frames. Recently, part of our consortium demonstrated proof-of-principle of a parallel-computation system in which a given combinatorial problem i ...
Voir le projet

 6

 TERMINÉ 
The vision of EU-ToxRisk is to drive a paradigm shift in toxicology towards an animal-free, mechanism-based integrated approach to chemical safety assessment. The project will unite all relevant disciplines and stakeholders to establish: i) pragmatic, solid read-across procedures incorporating mechanistic and toxicokinetic knowledge; and ii) ab initio hazard and risk assessment strategies of chemi ...
Voir le projet

 43

 TERMINÉ 

Smart and Inclusive Solutions for a Better Life in Urban Districts (SMARTER TOGETHER)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2021,

SMARTER TOGETHER’s overarching vision is to find the right balance between smart technologies and organizational/ governance dimensions in order to deliver smart and inclusive solutions and to improve citizen’s quality of life.SMARTER TOGETHER gather the European Lighthouse cities Lyon, Munich, Vienna, the Follower cities Santiago de Compostela, Sofia, Venice and Kyiv and Yokohama as observer citi ...
Voir le projet

 30

 TERMINÉ 

Formulations and Computational Engineering (FORCE)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

The FORCE consortium is a 10 pan-European expert partnership with the objective to develop a integrated Business Decision Support System (BDSS) based on open standards for industries engaged in formulating chemical ingredients. The generic BDSS is an open framework that connects any existing or future materials models at various levels of complexity and discretion (electronic, atomistic, mesoscop ...
Voir le projet

 11

 TERMINÉ 

Integrating National Research Agendas on Solar Heat for Industrial Processes (INSHIP)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

Despite process heat is recognized as the application with highest potential among solar heating and cooling applications, Solar Heat for Industrial Processes (SHIP) still presents a modest share of about 0.3% of total installed solar thermal capacity. As of today’s technology development stage – economic competitiveness restricted to low temperature applications; technology implementation requiri ...
Voir le projet

 32

 TERMINÉ 

Advanced Radio Astronomy in Europe (RadioNet)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

RadioNet is a consortium of 28 institutions in Europe, Republic of Korea and South Africa, integrating at European level world-class infrastructures for research in radio astronomy. These include radio telescopes, telescope arrays, data archives and the globally operating European Network for Very Long Baseline Interferometry (EVN). RadioNet is de facto widely regarded to represent the interests o ...
Voir le projet

 29

 TERMINÉ 

European Research and Innovation Centre of Excellence in ChiNA (ERICENA)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

Europe actively engages internationally to strengthen its leadership in the field of Science, Technology and Innovation (STI) in the global scene and improve synergies between Member States. Europe aims to foster international cooperation and strengthen its STI presence in China due to its growing importance and STI opportunities for European actors. ERICENA (European Research Innovation Centre of ...
Voir le projet

 13

 TERMINÉ 

Centre for Europe-Brazil Business and Innovation Cooperation (CEBRABIC)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

...l and SENAI Innovation Institutes, aiming to increase, diversify and consolidate the CEBRABIC service demand and offer. The project is implemented by a partnership of 12 organizations, led by Fraunhofer Gesellschaft, and including leading R&I&B organizations from Brazil, Portugal, Spain, Austria, Belgium, Hungary and Turkey.
Voir le projet

 12

 TERMINÉ 
The overall aim of N2B-patch is the development of a new innovative N2B drug delivery technology based on the synthesis of a biomaterial-based innovative galenic formulation that will be applied with the aid of a novel medical device equipped with a container closure system (CCS) as a hydrogel patch to the nasal olfactory region for the chronic treatment of MS. The galenic formulation will consist ...
Voir le projet

 11

 TERMINÉ 

Photonic Integrated Circuits Assembly and Packaging Pilot Line (PIXAPP)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

PIXAPP will establish the world’s first open access Photonic Integrated Circuit (PIC) assembly & packaging Pilot Line. It combines a highly-interdisciplinary team of Europe’s leading industrial & research organisations. PIXAPP provides Europe’s SMEs with a unique one-stop-shop, enabling them to exploit the breakthrough advantages of PIC technologies. PIXAPP bridges the ‘valley of death’, providing ...
Voir le projet

 20

 TERMINÉ 

ROS-Industrial quality-assured robot software components (ROSIN)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

...d by building on the existing open-source “Robot Operating System” (ROS) framework and leveraging its worldwide community. ROS and its subsidiary ROS-Industrial (European side led by TU Delft and Fraunhofer) is well-known, but its European industrial potential is underestimated. The two main critiques are (1) is the quality on par with industry, and (2) is there enough European industrial interest ...
Voir le projet

 7

 TERMINÉ 

Solid Catalysts for activation of aromatic C-H bonds (H-CCAT)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

ObjectivesThe H-CCAT project designs, upscales and shapes hybrid catalysts for the C-H functionalization of aromatic compounds. These solid catalysts will possess better recoverability, higher turnover numbers and better selectivity than current homogeneous catalysts for these reactions. The solid catalysts are applied at demonstration scale in the step-economical production of arylated or alkenyl ...
Voir le projet

 11

 TERMINÉ 
Power electronics is the key technology to control the flow of electrical energy between source and load for a wide variety of applications from the GWs in energy transmission lines, the MWs in datacenters that power the internet to the mWs in mobile phones. Wide band gap semiconductors such as GaN use their capability to operate at higher voltages, temperatures, and switching frequencies with gr ...
Voir le projet

 11

 TERMINÉ 
Scandium (Sc) is one of the highest valued elements in the periodic table and an element which is usually grouped in REEs as it shares many characteristics with Yttrium. Scandium technological applications are unique, as it is a key component in producing Solid Oxide Fuel Cells (Scandia-Stabilized-Zirconia solid electrolyte layer) or high strength Aluminum alloys used in aerospace and 3D printing ...
Voir le projet

 20

 TERMINÉ 

SOcial Cognitive Robotics in The European Society (SOCRATES)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2020,

SOCRATES is a PhD training program for 15 young researchers, created to develop the field of Social Robotics with an application focus on Robotics in Eldercare. The research in Social Robotics has a common theme of Interaction Quality, which is a concept for characterization of how a specific mode of interaction is fit for a given task, situation, and user. Interaction Quality often changes, for i ...
Voir le projet

 8

 TERMINÉ 

Lignin Based Carbon Fibres for Composites (LIBRE)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2020,

The use of carbon fiber (CF) based composites is of growing importance in many industrial applications with the current global market estimated at $28Bn [ref 9]. However, the current high cost, limited production capability in Europe and the use of petroleum-based polyacrylonitrile (PAN) as the precursor fiber (PF) from which the CF is ultimately derived, requires the development of innovative rou ...
Voir le projet

 12

 TERMINÉ 
European forests are expected to provide a broad range of ecosystem services (ES). This capacity is however threatened by the uncertainties of climate change, the complex dynamics of evolving global markets and the pressures for increased use of bioenergy. Such challenges cannot be effectively addressed with an uncritical regional or national commitment to traditional forest management models (FMM ...
Voir le projet

 21

 TERMINÉ 
...O-ALTRA, CRF and VOLVO (also members of EUCAR, suppliers VALEO, BOSCH, JOHNSON MATTHEY and JSR MICRO (CLEPA), leading Engineering and Technology Companies/organizations and Universities with TNO, FRAUNHOFER, and VUB (EARPA). The majority are also active members of ERTRAC and EGVIA.The overall objectives of the ORCA project are: Reduce the TCO to the same diesel vehicle TCO level, targeting over 1 ...
Voir le projet

 11

 TERMINÉ 
Machine learning have revolutionized the way we use computers and is a key technology in the analysis of large data sets. The FUDIPO project will integrate machine learning functions on a wide scale into several critical process industries, showcasing radical improvements in energy and resource efficiency and increasing the competitiveness of European industry. The project will develop three large ...
Voir le projet

 11

 TERMINÉ 
Approximately one third of all food produced globally is wasted every year throughout the whole value chain-from farmers to consumers. To extract the significant amounts of valuable compounds contained in these wastes, AgriMax will combine affordable and flexible processing technologies (ultrasound assisted and solvent extraction, filtration, thermal and enzymatic treatments) for the valorization ...
Voir le projet

 30

 TERMINÉ 
Within the project a new highly efficient biomass CHP technology consisting of a fuel-flexible fixed-bed updraft gasifier, a novel compact gas cleaning system and a solid oxide fuel cell (SOFC) shall be developed for a capacity range of 1to 10 MW (total energy output). The technology shall distinguish itself by a wide fuel spectrum applicable (wood pellets, wood chips, SRC, selected agricultural f ...
Voir le projet

 9

 TERMINÉ 
The energy crisis, environmental pollution and global warming are serious problems that are of great concern throughout the world. Around 40% of the world’s energy consumption is dedicated to the production of materials and chemicals. Thus, there is a need to develop high-performance materials based on renewable resources, simpler to synthesise and cost effective. Carbon materials derived from ren ...
Voir le projet

 10

 TERMINÉ 
NoAW : No Agro-Waste.Innovative approaches to turn agricultural waste into ecological and economic assets.Driven by a “near zero-waste” society requirement, the goal of NoAW project is to generate innovative efficient approaches to convert growing agricultural waste issues into eco-efficient bio-based products opportunities with direct benefits for both environment, economy and EU consumer. To ach ...
Voir le projet

 32

 TERMINÉ 
The “NDTonAIR” consortium involves Universities, Research Organisations and major European companies working on new Non-Destructive Testing (NDT) and Structural Health Monitoring (SHM) techniques for aerospace, of which both are key technologies. The goal is to train a new generation of scientists and engineers with a wide background of theoretical and experimental skills, capable of developing th ...
Voir le projet

 11

 TERMINÉ 

Reliable Bio-based Refinery Intermediates (BioMates)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,

The EU targets at replacing 10% of all transport fossil fuels with biofuels by 2020 to reduce the dependence on petroleum through the use of nationally, regionally or locally produced biofuels, while simultaneously reducing greenhouse gas emissions. However, the EU is concerned with the questionable sustainability of the conventional biofuels and the unattractive production costs of second and thi ...
Voir le projet

 9

 TERMINÉ 
HotMaps will develop, demonstrate and disseminate a toolbox to support public authorities, energy agencies and planners in strategic heating and cooling planning on local, regional and national levels, and in-line with EU policies. The toolbox will facilitate the following tasks on a spatially disaggregated level: (1) Mapping heating and cooling energy situation including renewable and waste heat ...
Voir le projet

 16

 TERMINÉ 
BIOCLEAN addresses the urgent need to create a sustainable training network across academia, industry and the healthcare sector which will fill the gap in Europe and beyond to produce highly skilled multi-disciplinary young scientists competent in chemistry, engineering and experimental wet lab biology. BIOCLEAN will deliver this network of young scientists who can apply their proven skill sets g ...
Voir le projet

 10

 TERMINÉ 
...o major European space companies, will make a key contribution as end-users of space data converters – guiding initial requirements and evaluating the devices under relevant conditions. The Fraunhofer Institute (D) will significantly contribute with reference PCBs hosting the new ADC and DAC, thus enabling detailed device evaluation and enhancing the dissemination of the results. Assembling such h ...
Voir le projet

 4

 TERMINÉ 

Photovoltaic module life time forecast and evaluation (SOLAR-TRAIN)

Date du début: 1 sept. 2016, Date de fin: 31 août 2020,

The quality assurance in the photovoltaic industry is yet in its infancy, requiring both underpinning science and trained personnel to reduce costs of energy. An unmet industrial requirement is an accelerated, and operating environment specific, service life time and energy yield assessment. SOLAR-TRAIN will qualify ESRs in the field of PV durability as part of a highly innovative, multi-disciplin ...
Voir le projet

 8

 TERMINÉ 

HOLIstic optimisation of SHIP design and operation for life cycle (HOLISHIP)

Date du début: 1 sept. 2016, Date de fin: 31 août 2020,

Most maritime products are typically associated with large investments and are seldom built in large series. Where other modes of transport benefit from the economy of series production, this is not the case for maritime products which are typically designed to refined customer requirements increasingly determined by the need for high efficiency, flexibility and low environmental impact at a compe ...
Voir le projet

 39

 TERMINÉ 

iABC Programme (IABC PROGRAMME)

Date du début: 1 août 2015, Date de fin: 31 juil. 2020,

Cystic Fibrosis (CF) is a common fatal inherited disease with a frequency of 1 in 2500 live births, affecting approximately 36,000 (0.737/10,000) people in the EU. Chronic bacterial pulmonary infection leading to an irreversible decline in lung structure and function is the main cause of mortality and morbidity in patients with CF, with more than 95% of deaths due to respiratory failure. Pseudomon ...
Voir le projet

 21

 TERMINÉ 

Scalable automation for flexible production systems (ScalABLE4.0)

Date du début: 1 janv. 2017, Date de fin: 30 juin 2020,

The main objective of the ScalABLE 4.0 project is the development and demonstration of an open scalable production system framework (OSPS) that can be used efficiently and effectively to visualize, virtualize, construct, control, maintain and optimize production lines. The OSPS aims to provides this through a) a tight integration of the enterprise information systems with transformable automation ...
Voir le projet

 8

 TERMINÉ 
HarmonicSS vision is to create an International Network and Alliance of partners and cohorts, entrusted with the mission of addressing the unmet needs in primary Sjogren Syndrome; working together to create and maintain a platform with open standards and tools, designed to enable secure storage, governance, analytics, access control and controlled sharing of information at multiple levels along wi ...
Voir le projet

 39

 TERMINÉ 
Metasurfaces, thin film planar, artificial structures, have recently enabled the realization of novel electromagnetic (EM) and optical components with engineered functionalities. These include total EM radiation absorption, filtering and steering of light and sound, as well as nano-antennas for sensors and implantable devices. Nonetheless, metasurfaces are presently non-adaptive and non-reusable, ...
Voir le projet

 7

 TERMINÉ 
The proposal addresses novel concepts for introducing Robotics and Autonomous Systems in the Construction Sector where, at this moment, the presence is minor. Specifically, the Hephaestus project focuses on highly risked and critical construction tasks such as prefab wall installation. In that sense, the Hephaestus has been conceived as a solution for accomplishing multiple tasks on vertical or in ...
Voir le projet

 9

 TERMINÉ 

ACTivating InnoVative IoT smart living environments for AGEing well (ACTIVAGE)

Date du début: 1 janv. 2017, Date de fin: 30 juin 2020,

ACTIVAGE is a European Multi Centric Large Scale Pilot on Smart Living Environments. The main objective is to build the first European IoT ecosystem across 9 Deployment Sites (DS) in seven European countries, reusing and scaling up underlying open and proprietary IoT platforms, technologies and standards, and integrating new interfaces needed to provide interoperability across these heterogeneous ...
Voir le projet

 50

 TERMINÉ 

Self-replicating Colloidal Assemblies (REPLICOLL)

Date du début: 1 juil. 2015, Date de fin: 30 juin 2020,

Self-replication is the preeminent property of living systems and natural materials. Nature builds and repairs by self-replication. Purely synthetic materials so far lack this important ability. An indispensable prerequisite is the multi-directional control of interactions between the building blocks of materials. In order to generate colloidal building blocks, which are able to self-replicate in ...
Voir le projet

 1

 TERMINÉ 
The VERTIGO project provides a major opportunity to develop more inclusive, intercultural, and thus productive and innovative approaches to the participation of artists in ICT research activities and for promoting synergies between creative arts, businesses, research organizations and the society at general. If the digital economy of Europe is to prosper over the long term, then its full and diver ...
Voir le projet

 8

 TERMINÉ 
Renewable energy sources are key enablers to decrease greenhouse gas emissions and to cope with the anthropogenic global warming. The intermittent behaviour of them and their limited storage capabilities present new challenges to power system operators in maintaining power quality and reliability. However, the increased availability of advanced automation and communication technologies has also pr ...
Voir le projet

 19