Rechercher des projets européens

37 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Avionics Systems Hosted on a distributed modular electronics Large scale dEmonstrator for multiple tYpe of aircraft (ASHLEY)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,

In search for a more competitive, multiple types of aircrafts, IMA based, avionics platform solution, the European aerospace industry has recently initiated the IMA2G paradigm thanks to the EC funded SCARLETT project.This latter successfully validated a first underlying set of IMA2G concepts (Separate Core Processing resources from I/O resources, introduce resource segments typology of electronics ...
Voir le projet

 39

 TERMINÉ 

DIAmond Devices Enabled Metrology and Sensing (DIADEMS)

Date du début: 1 sept. 2013, Date de fin: 31 août 2017,

The DIADEMS project aims at exploiting the unique physical properties of NV color centres in ultrapure single-crystal CVD-grown diamond to develop innovative devices with unprecedented performances for ICT applications. By exploiting the atom-like structure of the NV that exhibits spin dependent optical transitions, DIADEMS will make optics-based magnetometry possible.The objectives of DIADEMS are ...
Voir le projet

 17

 TERMINÉ 

Low Emissions Core-Engine Technologies (LEMCOTEC)

Date du début: 1 oct. 2011, Date de fin: 30 juin 2017,

The main objective of the LEMCOTEC project will be the improvement of core-engine thermal efficiency by increasing the overall pressure ratio (OPR) to up to 70 leading to a further reduction of CO2. Since NOx increases with OPR, combustion technologies have to be further developed, at the same time, to at least compensate for this effect. The project will attain and exceed the ACARE targets for 20 ...
Voir le projet

 39

 TERMINÉ 

HYdrogen cells for AiRborne Usage (HYCARUS)

Date du début: 1 mai 2013, Date de fin: 30 avr. 2017,

...t, water and oxygen depleted air) will also have a positive impact on the global aircraft efficiency when they are harnessed and reused within the aircraft system.The HYCARUS project will design a generic PEM fuel cell system compatible of two NEA, then develop, test and demonstrate it against TRL6. A secondary electrical power generation model for a business executive jet will be run. The applic ...
Voir le projet

 10

 TERMINÉ 

Resistance in Gram-Negative Organisms: Studying Intervention Strategies (R-GNOSIS)

Date du début: 1 oct. 2011, Date de fin: 31 mars 2017,

Antibiotics are a mainstay of public health, but their use has increased exponentially leading to the emergence of antibiotic resistance. The R-GNOSIS (Resistance in Gram-Negative Organisms: Studying Intervention Strategies) project combines 5 international clinical studies, all supported by highly innovative microbiology, mathematical modelling and data-management, to determine - in the most rele ...
Voir le projet

 27

 TERMINÉ 

NOX enzymes as mediators of inflammation-triggered neurodegeneration: modulating NOX enzymes as novel therapies (NEURINOX)

Date du début: 1 janv. 2012, Date de fin: 31 déc. 2016,

NEURINOX aims at elucidating the role of NADPH oxidases (NOX) in neuroinflammation and its progression to neurodegenerative diseases (ND), as well as evaluating the potential of novel ND therapeutics approaches targeting NOX activity. NOX generate reactive oxygen species (ROS) and have emerged as regulators of neuroinflammation. Their role is complex: ROS generated by NOX lead to tissue damage in ...
Voir le projet

 15

 TERMINÉ 

Full Aero-thermal Combustor-Turbine interactiOn Research (FACTOR)

Date du début: 1 déc. 2010, Date de fin: 30 nov. 2016,

To achieve lower Specific Fuel Consumption (SFC) and CO2/NOx emissions, modern turbomachineries operate at high velocities and high temperature conditions. The lack of confidence in the prediction of combustor-turbine interactions leads to apply extra safety margins on components design. Therefore, the understanding of combustor-turbine flow field interactions is mandatory to preserve High Pressur ...
Voir le projet

 24

 TERMINÉ 

More Affordable Aircraft structure through eXtended, Integrated, and Mature nUmerical Sizing (MAAXIMUS)

Date du début: 1 avr. 2008, Date de fin: 30 sept. 2016,

...s. Lastly, more conductive composites are necessary to avoid additional weight for system protection. The aim of MAAXIMUS (More Affordable Aircraft structure through eXtended, Integrated, & Mature nUmerical Sizing) is to demonstrate the fast development and right-first-time validation of a highly-optimised composite airframe. The MAAXIMUS objectives related to the highly-optimised composite airfra ...
Voir le projet

 60

 TERMINÉ 

Thermal Overall Integrated Conception of Aircraft (TOICA)

Date du début: 1 sept. 2013, Date de fin: 30 sept. 2016,

Thermal behaviour of aircraft has recently become a crucial subject due to many factors: increasing number of complex systems required by modern, more electric, commercial aircraft, the introduction of hotter engines with higher by-pass ratios, the increased use of composite material in aircraft structures, or the confinement of highly dissipative equipment and systems in smaller areas to earn spa ...
Voir le projet

 34

 TERMINÉ 

Intelligent Design Methodologies for Low Pollutant Combustors for Aero-Engines (IMPACT-AE)

Date du début: 1 nov. 2011, Date de fin: 31 mai 2016,

... aero-design process. Preliminary combustor design tools will be coupled with advanced parametrisation and automation tools. Improved heat transfer and NOx models will increase the accuracy of the numerical prediction. The advanced representation of low emission combustors and the capability to investigate combustor scaling effects allow an efficient optimisation of future combustors targeting a c ...
Voir le projet

 21

 TERMINÉ 

ACTUATION 2015: Modular Electro Mechanical Actuators for ACARE 2020 Aircraft and Helicopters (ACTUATION2015)

Date du début: 1 nov. 2011, Date de fin: 30 avr. 2016,

The All-Electric Aircraft is a major target for the next generation of aircraft to lower consumption of non-propulsive power and thus fuel burn. To eliminate hydraulic circuits, pumps and reservoirs, Electro Mechanical Actuators (EMA) are mandatory but now need to meet cost, reliability and weight requirements from the airframers.ACTUATION2015 aims to develop and validate a common set of standard ...
Voir le projet

 56

 TERMINÉ 

Suppression Of underwater Noise Induced by Cavitation (SONIC)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2015,

The aim of the SONIC project is to develop tools to investigate and mitigate the effects of underwater noise generated by shipping, both in terms of the footprint of an individual ship (a “noise footprint”) and of the spatial distribution of sound from a large number of ships contribution to the sound (a “noise map”). The project`s first objective is to enhance the understanding of noise generated ...
Voir le projet

 13

 TERMINÉ 

A bio-mimicry enabled artificial sniffer (SNIFFER)

Date du début: 1 févr. 2012, Date de fin: 31 mai 2015,

"The capture and analysis of odours offers significant potential for border security applications related to the detection and analysis of persons, illegal substances and in particular explosives. Dogs - the most effective ""tool"" for detecting and analysing odours - can only be trained for a small sample of odours, get easily tired and are often perceived as intrusive by the public.The SNIFFER p ...
Voir le projet

 15

 TERMINÉ 

Green Retrofitting through Improved Propulsion (GRIP)

Date du début: 1 nov. 2011, Date de fin: 31 mars 2015,

"The aim of the GRIP project is to reduce fuel consumption in shipping by 5% (with individual ships up to 10%) and thus reduce exhaust gas emissions. Its first objective is to give a sound basis for the choice of energy-saving devices (ESD) for ship owners. The second is to give insight into the detailed requirements on the device design by performing an analysis of the interaction between hull a ...
Voir le projet

 11

 TERMINÉ 

Impact of Specific Antibiotic Therapies on the prevalence of hUman host ResistaNt bacteria (SATURN)

Date du début: 1 janv. 2010, Date de fin: 31 déc. 2014,

"Many results drawn from previous studies of the effect of antibiotic use on emergence, selection and spread of antimicrobial resistance (AMR) have lacked a holistic view combining all aspects into one study. The SATURN project aims to study the impact of antibiotic exposure on AMR with a multidisciplinary approach that bridges molecular, epidemiological, clinical and pharmacological research. Two ...
Voir le projet

 16

 TERMINÉ 

Scintillation Detectors And New Technologies For Nuclear Security (SCINTILLA)

Date du début: 1 janv. 2012, Date de fin: 31 déc. 2014,

SCINTILLA aims at building an innovative comprehensive toolbox of devices and best-of-breed technologies for the enhanced detection and identification of difficult to detect radioactive sources and nuclear material:• Dealing with the challenge of masked and shielded material• Developing effective solutions, which are reliable, portable / mobile and cost effective• Finding a reliable replacement fo ...
Voir le projet

 10

 TERMINÉ 

Fuel Injector Research for Sustainable Transport (FIRST)

Date du début: 1 déc. 2010, Date de fin: 30 nov. 2014,

FIRST will deliver key enabling technologies for combustion emission reduction by developing improved design tools and techniques for modelling and controlling fuel sprays and soot.Aviation’s environmental impact must be reduced to allow sustainable growth to benefit European industry and society. This is captured in ACARE’s 2020 goals of reducing CO2 by 50%, NOx by 80% and in SRA1/2 proposed redu ...
Voir le projet

 22

 TERMINÉ 

CErtification of Real Time Applications desIgNed for mixed criticaliTY (CERTAINTY)

Date du début: 1 nov. 2011, Date de fin: 31 oct. 2014,

Pushed by economical and ecological stakes, embedded systems from the avionics, automotive and automation domains, featuring real-time, safety and critical capabilities have to face increasing performance needs that will no more be satisfied by existing architectures based on single-cores. Current trends are to take benefit from multi-core processors high performance in replacing single-cores by m ...
Voir le projet

 9

 TERMINÉ 

OPtimisation for low Environmental Noise impact AIRcraft (OPENAIR)

Date du début: 1 avr. 2009, Date de fin: 30 sept. 2014,

Reducing noise from aircraft operations perceived by airport neighbouring communities is a major challenge facing the aircraft manufacturing industry, social society and the air transport business. By adopting a whole aircraft approach based on the latest developments in active / adaptive technologies, flow control techniques and advances in computational aero-acoustics applied to the major causes ...
Voir le projet

 51

 TERMINÉ 

"MAINtenance, renewaL and Improvement of rail transport iNfrastructure to reduce Economic and environmental impacts" (MAINLINE)

Date du début: 1 oct. 2011, Date de fin: 30 sept. 2014,

"Growth in demand for rail transportation across Europe is predicted to continue. Much of this growth will have to be accommodated on existing lines that contain old infrastructure. This demand will increase both the rate of deterioration of these elderly assets and the need for shorter line closures for maintenance or renewal interventions. However, interventions on elderly infrastructure will al ...
Voir le projet

 21

 TERMINÉ 

Cost Competitive Component integration for StatiOnary Fuel Cell power (C3SOFC)

Date du début: 1 oct. 2011, Date de fin: 30 sept. 2014,

"Solid oxide fuel cells for stationary power have been researched since the late 1980s as potentially high efficiency and environmentally friendly means to generate electricity. Since that time substantial progress has been made however obstacles remain to reach industrial exploitation.For end users, the cost of electricity not only the cost of the fuel cell is of primary concern. This cost is dri ...
Voir le projet

 6

 TERMINÉ 

Fixed Dose Combination drugs for Secondary Cardiovascular Prevention (FOCUS)

Date du début: 1 juil. 2010, Date de fin: 30 juin 2014,

Cardiovascular diseases (CVD) are the leading cause of death worldwide, and their incidence is increasing sharply in developing countries. Two insufficiently addressed factors contribute to increased morbidity and mortality, threatening the effectiveness of any health system: poor patient adherence to treatment, and limited access to medication in resource-poor countries and regions. To address th ...
Voir le projet

 9

 TERMINÉ 

Engine Representative Internal Cooling Knowledge and Applications (ERICKA)

Date du début: 1 juil. 2009, Date de fin: 30 juin 2014,

"The goal of ERICKA is to directly contribute to reductions in aircraft engine fuel consumption with a targeted contribution of 1% reduction in SFC relative to engines currently in service. The fuel efficiency of a jet engine used for aircraft propulsion is dependent on the performance of many key engine components. One of the most important is the turbine whose efficiency has a large influence ...
Voir le projet

 20

 TERMINÉ 

Strategic Research For Innovative Marine Propulsion Concepts (STREAMLINE)

Date du début: 1 mars 2010, Date de fin: 28 févr. 2014,

"Increasing environmental concerns and soaring oil prices are creating a new focus on fuel efficiency for the marine industry. Combining low emissions with demands for more advanced vessels than ever before drives the need for radically new propulsion concepts delivering a step-change in efficiency. STREAMLINE is the response of the marine community to this demand that will be addressed through fo ...
Voir le projet

 23

 TERMINÉ 

Extending the process limits of laser polymer welding with high-brilliance beam sources (POLYBRIGHT)

Date du début: 1 oct. 2009, Date de fin: 31 oct. 2013,

PolyBright will develop high power high brilliance lasers with new wavelengths between 1500 and 1900 nm which are adapted to the absorption properties of polymers. With innovative beam manipulation systems for optimum adaption of energy, the project will provide high speed and flexible laser manufacturing technology to expand the limits of current plastic part assembly. Key innovations of the Poly ...
Voir le projet

 18

 TERMINÉ 

Embryonic Stem cell-based Novel Alternative Testing Strategies (ESNATS)

Date du début: 1 avr. 2008, Date de fin: 30 sept. 2013,

"ESNATS aims at developing a novel toxicity test platform based on embryonic stem cells (ESC), especially human ESC (hESC), to accelerate drug development, reduce R&D costs and propose a powerful alternative to animal tests (3 Rs). ESNATS will address current drug-testing shortcomings: - testing takes place late in the development cycle - animal test systems bear the risk of non-prediction due to ...
Voir le projet

 34

 TERMINÉ 

"Knowledge for Ignition, Acoustics and Instabilities" (KIAI)

Date du début: 1 mai 2009, Date de fin: 30 avr. 2013,

"For the time being, the European engine industry does not have at its disposal methodologies adapted to predict the unsteady behaviour of low NOx combustors. Consequently and in order to be able to set up the development of low NOx technologies, KIAI will deliver reliable unstationary CFD tools which will allow a deep comprehension of unsteady phenomena. The main objective of the KIAI project is ...
Voir le projet

 18

 TERMINÉ 

Useful PLASMa for AEROdynamic control (PLASMAERO)

Date du début: 1 oct. 2009, Date de fin: 31 déc. 2012,

...nd notably the ease of implementation that these innovative devices have over other potential active actuators. The project objectives are: Understand, model and classify, through experimental and numerical studies, the most relevant physical characteristics of surface and jet plasma actuators capable of influencing airflow; Perform comparative experimental tests & numerical studies of different a ...
Voir le projet

 11

 TERMINÉ 

Technologies Enhancement for Clean Combustion in Aero-engines (TECC-AE)

Date du début: 1 juil. 2008, Date de fin: 31 déc. 2012,

"Due to continuous efforts through past and ongoing European projects, lean combustion by means of internally staged injectors now appears to be the promising technology for obtaining the required emission reductions compatible with a sustainable growth of aviation transport. (cf ACARE 2020) Recognising that putting into service such a technology as soon as possible is the only way to effectively ...
Voir le projet

 18

 TERMINÉ 

Collaborative & Robust Engineering using Simulation Capability Enabling Next Design Optimisation (CRESCENDO)

Date du début: 1 mai 2009, Date de fin: 31 oct. 2012,

...“Energy Aircraft”, “Thermal Aircraft” and “Value Generation” design problems and viewpoints during the preliminary design, detailed design, and test and certification phases of a generic aircraft product life-cycle. The BDA will become the new backbone for the simulation world, just as the Digital Mock-up (DMU) is today for the Product Life-cycle Management (PLM) world. This is considered a challe ...
Voir le projet

 59

 TERMINÉ 

High yield and performance stem cell lab (Hyperlab)

Date du début: 1 sept. 2009, Date de fin: 31 août 2012,

The success of stem cell therapy is highly dependent on a safe and reliable supply of human stem cells and stem cell-derived differentiated cells, which must be assured by efficient and robust culture methods. Current culture of human embryonic and adult stem cells is not optimised (with regards to e.g. media, growth factors, supporting biomaterials, differentiation techniques) and is far from ful ...
Voir le projet

 9

 TERMINÉ 

SCAlable & ReconfigurabLe Electronics plaTforms and Tools (SCARLETT)

Date du début: 1 mai 2008, Date de fin: 30 avr. 2012,

"The first generation of Integrated Modular Avionics (IMA1G) has been researched via European funded research projects; PAMELA, NEVADA and VICTORIA. This technology supported a revolutionary step away from federated architectures and their classical bespoke electronics to a modular architecture with common resources. IMA1G was introduced to the market on the A380, A400M and B787 aircraft. IMA1G re ...
Voir le projet

 39

 TERMINÉ 

Transmissions in Aircraft on Unique Path wirEs (TAUPE)

Date du début: 1 sept. 2008, Date de fin: 29 févr. 2012,

...now mature, each technology has its own dedicated wires architecture. The aeronautic sector now needs innovative solutions to merge the architectures in one full avionics-shared electrical and numerical network.To enable the All Electric Aircraft, TAUPE will define a fully optimized avionic architecture for power and data transmission on unique path wires. From this optimized architecture, the rel ...
Voir le projet

 18

 TERMINÉ 

valiDation of Radical Engine Architecture systeMs (DREAM)

Date du début: 1 févr. 2008, Date de fin: 31 janv. 2012,

"Since the publication of the ACARE goals, the commercial and political pressure to reduce CO2 has increased considerably. DREAM is the response of the aero-engine community to this pressure. The first major DREAM objective is to design, integrate and validate new engine concepts based on open rotor contra-rotating architectures to reduce fuel consumption and CO2 emissions 7% beyond the ACARE 2020 ...
Voir le projet

 46

 TERMINÉ 

European Exascale Software Initiative - 2010/2011 (EESI)

Date du début: 1 juin 2010, Date de fin: 30 nov. 2011,

The European Exascale Software Initiative (EESI) goal is to build a European vision and roadmap to address the challenge of the new generation of massively parallel systems composed of millions of heterogeneous cores which will provide Petaflop performances in 2010 and Exaflop performances in 2020. These capabilities lead to outstanding technological breakthrough possibilities in computations and ...
Voir le projet

 8

 TERMINÉ 

TrUsted Revocable Biometric IdeNtitiEs (TURBINE)

Date du début: 1 févr. 2008, Date de fin: 31 janv. 2011,

TURBINE is a multi-disciplinary privacy enhancing technology, combining innovative developments in cryptography and fingerprint biometrics. It aims at providing highly reliable biometric 1:1 verifications, multi-vendor interoperability, and system security, while solving major issues related to privacy concerns associated to the use of biometrics for ID management. Its primary objective is to rend ...
Voir le projet

 10

 TERMINÉ 

Understanding and fighting metastasis via dissection of the Core Invasive Machinery (MetaFight)

Date du début: 1 janv. 2008, Date de fin: 31 déc. 2010,

The co-operative Metafight project will perform functional studies to understand the dissemination and outgrowth of metastasis through systematic analysis of the Core Invasive Machinery contained within integrin-mediated ECM attachment structure. It includes a large and discretely localised intracellular signalling network which drives migration and invasion. Our strategy is based on the hypothesi ...
Voir le projet

 10