16 projets européens trouvés
Recherche sur 125080 projets européens
TERMINÉ
DRiving InnoVation in crisis management for European Resilience (DRIVER)
Date du début: 1 mai 2014, Date de fin: 31 oct. 2018,
DRIVER starts from the experience that neither successful R&D nor strong end-user demand always lead to innovation in the Crisis Management (CM) domain. This is a problem since as societies become more complex, increasing scope and unpredictability of potential crises and faster dynamics of major incidents put increasingly stringent demands on CM. European CM capabilities already constitute a matu ...
Voir le projet
38
Participants partenaires
TERMINÉ
All-in-one manufacturing platform for system in package and micromechatronic systems (NextFactory)
Date du début: 1 sept. 2013, Date de fin: 31 août 2017,
The mission of the NextFactory project is to develop and validate a new type of all-in-one manufacturing technology combining, for the first time, in a single piece of equipment, 3D freeform printing and ultra-precision 3D assembly. This highly flexible and scalable facility will empower microsystem manufacturers - and in particular SMEs - to effectively produce highly miniaturised Smart Products- ...
Voir le projet
11
Participants partenaires
TERMINÉ
European Control System Security Incident Analysis Network (ECOSSIAN)
Date du début: 1 juin 2014, Date de fin: 31 mai 2017,
The protection of critical infrastructures increasingly demands solutions which support incident detection and management at the levels of individual CI, across CIs which are depending on each other, and across borders. An approach is required which really integrates functionalities across all these levels. Cooperation of privately operated CIs and public bodies (governments and EU) is difficult b ...
Voir le projet
22
Participants partenaires
TERMINÉ
Enhanced Lightweight Design (ENLIGHT)
Date du début: 1 oct. 2012, Date de fin: 30 sept. 2016,
Lightweight materials such as carbon-fibre reinforced plastics have been used up to now mostly in high-performance cars with relatively high cost & low production volumes. Instead the electric cars of the future require lightweight solutions that not only enable specific design requirements to be respected but are also cost effective and sustainable throughout their lifecycle.ENLIGHT aims to accel ...
Voir le projet
22
Participants partenaires
TERMINÉ
"High Efficient, Single-Use-Bioreactor simulating mammalian tissue conditions for expression and proliferation" (HESUB)
Date du début: 1 mai 2013, Date de fin: 30 avr. 2016,
A unique combination of earlier EU funded projects allow four research SME´s to create a combined most visionary and innovative product for improved health. There is a strategic decision from pharmaceutical companies and hospitals for:1. continues expressing of biologicals to fulfill the expectation to “personalized medicine” and 2. proliferation of cells to support therapeutic applications and 3. ...
Voir le projet
5
Participants partenaires
TERMINÉ
Enhancing resource Uptake from Roots under stress in cereal crops (EUROOT)
Date du début: 1 janv. 2012, Date de fin: 31 déc. 2015,
The overall goal of EURoot is to help farmers to face both climate change, which is expected to result in increasingly uneven rainfall, and meet the societal demand for sustainable agriculture with reduced use of water and fertilizers. EURoot objective is to enhance the cereal plant capability to acquire water and nutrients through their roots and maintain growth and performance under stress condi ...
Voir le projet
20
Participants partenaires
TERMINÉ
Bioreactor-based, clinically oriented manufacturing of engineered tissues (BIO-COMET)
Date du début: 1 déc. 2011, Date de fin: 30 nov. 2015,
Despite significant achievements in the field of regenerative medicine and the enormous potential for engineered tissue products, significant hurdles have prevented cellular therapies from gaining wide-spread clinical adoption. Manufacturing related issues have been proposed as key challenges to be addressed for the translation of regenerative therapies to the clinic and the successful commerciali ...
Voir le projet
9
Participants partenaires
TERMINÉ
Development of adaptive ProductioN systems for Eco-efficient firing processes (DAPhNE)
Date du début: 1 oct. 2012, Date de fin: 30 sept. 2015,
The overall scope of the DAPhNE project is to develop and demonstrate a package of integrated solutions for energy intensive processes (ceramics, cement and glass), based on tuning micro-wave technologies to the material characteristics and on intelligent control systems, to provide real time information about the energy consumption as well as the product quality.Microwave heating is now a well e ...
Voir le projet
18
Participants partenaires
TERMINÉ
Damage risk assessment, economic impact and mitigation strategies for sustainable preservation of cultural heritage in the times of climate change (CLIMATE FOR CULTURE)
Date du début: 1 nov. 2009, Date de fin: 31 oct. 2014,
Climate change is one of the most critical global challenges of our time which also threatens cultural heritage. As a non-renewable important resource to the European identity, sustainable adaptation strategies are required for long term preservation. For this purpose and for the first time ever, the CLIMATE FOR CULTURE project will couple completely new high resolution (10x10km) climate change ev ...
Voir le projet
28
Participants partenaires
TERMINÉ
New tailor-made PHB-based nanocomposites for high performance applications produced from environmentally friendly production routes (BUGWORKERS)
Date du début: 1 juil. 2010, Date de fin: 30 juin 2014,
The project aims to develop a new cost-competitive and environmentally friendly bionanocomposite material based on the combination of a polyhydroxybutyrate (PHB) matrix with new chemical, structure produced by new fermentation culture technology with two types of nanofibres,cellulose whiskers and lignin-based, in order to have a true alternative to engineering materials in two main sectors: househ ...
Voir le projet
15
Participants partenaires
TERMINÉ
Internet of Things Architecture (IoT-A)
Date du début: 1 sept. 2010, Date de fin: 30 nov. 2013,
Description
The Lighthouse Project IoT-A proposes the creation of an architectural reference model for the IoT as well as the definition of a set of key building blocks to lay the foundation for a ubiquitous IoT.There has been much hype about the “Internet of Things”. The idea of a globally interconnected continuum of devices, objects and ...
Voir le projet
20
Participants partenaires
TERMINÉ
Models and generic interfaces for easy and safe Battery insertion and removal in electric vehicles (EASYBAT)
Date du début: 1 janv. 2011, Date de fin: 30 juin 2013,
"“The Battery is the Car”. New traction battery packs make the fully electric & plug-in vehicles more and more capable. Their share of the price of the car is set to become even more dominant. Factors driving this include the strident demand for better car range. Battery packs increasingly incorporate electronics for safety and power conversion. The integration of these new complex battery packs p ...
Voir le projet
11
Participants partenaires
TERMINÉ
Friendly Intelligent Energy Management System for Existing Residential Buildings (FIEMSER)
Date du début: 1 févr. 2010, Date de fin: 30 avr. 2013,
FIEMSER (Friendly Intelligent Energy Management System for Residential Building) addresses the need of achieving energy positive buildings through solutions based on a rational consumption of energy, local generation and an increase in the consciousness of the building owners towards their energy consumption habits.The main goal of FIEMSER matches with the challenges of the Call by aiming to build ...
Voir le projet
8
Participants partenaires
TERMINÉ
Modeling, Control and Management of Thermal Effects in Electronic Circuits of the Future (THERMINATOR)
Date du début: 1 janv. 2010, Date de fin: 31 déc. 2012,
Electronic devices of the latest generations, being those integrated circuits or discrete components, are often required to operate in harsh environmental conditions, where the temperature may reach over hundred degrees centigrade. Obviously, this has negative impact on several parameters of the electronic devices, ranging from slow-down and transient, recoverable errors to permanent failures and ...
Voir le projet
21
Participants partenaires
TERMINÉ
High Power Electric propulsion: a Roadmap for the future (HiPER)
Date du début: 1 oct. 2008, Date de fin: 31 janv. 2012,
The main objective of the HiPER project is to initiate technological and programmatic consolidation in the development of innovative electric propulsion technologies (and of the related power generation) to fulfill future European space transportation needs. The objective will be pursued by conceiving and substantiating a long term vision for European space transportation and exploration, conside ...
Voir le projet
21
Participants partenaires
TERMINÉ
Best Practices for IPR and Technology Transfer in Nanotechnology Developments (Nano2Market)
Date du début: 1 juil. 2009, Date de fin: 31 août 2010,
The lack of models for technology transfer at nanotechnology developments is of increasing concern for the sector. This CSA will fulfil this gap providing guidelines for technology transfer and rules for IPR and license agreements in nanotechnology developments. To achieve these objectives, a consortium is formed by: 1) Key European research centres in different areas of nano and converging techno ...
Voir le projet