30 projets européens trouvés
Recherche sur 125080 projets européens
TERMINÉ
PRACE 5th Implementation Phase Project (PRACE-5IP)
Date du début: 1 janv. 2017, Date de fin: 30 avr. 2019,
PRACE, the Partnership for Advanced Computing is the permanent pan-European High Performance Computing service providing world-class systems for world-class science. Systems at the highest performance level (Tier-0) are deployed by Germany, France, Italy and Spain providing researchers with over 11 billion core hours of compute time. HPC experts from 25 member states enabled users from academia an ...
Voir le projet
30
Participants partenaires
TERMINÉ
Towards Industrial LES/DNS in Aeronautics – Paving the Way for Future Accurate CFD (TILDA)
Date du début: 1 mai 2015, Date de fin: 30 avr. 2018,
The ability to simulate aerodynamic flows using CFD methods has progressed rapidly over the last decades and has given rise to a change in design processes in aeronautics already. But more improvement is necessary to overcome the (still) existing lack in confidence in CFD usage, based on turbulence modelling. The TILDA project will offer methods and approaches combining advanced and efficient high ...
Voir le projet
12
Participants partenaires
TERMINÉ
Engine Module Validators (ENOVAL)
Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,
The ENOVAL project will provide the next step of engine technologies to achieve and surpass the ACARE 2020 goals on the way towards Flightpath 2050. ENOVAL completes the European 7th Framework Programme (FP7) roadmap of Level 2 aero engine projects. ENOVAL will focus on the low pressure system of ultra-high by-pass ratio propulsion systems (12 < BPR < 20) in conjunction with ultra high overall pre ...
Voir le projet
37
Participants partenaires
TERMINÉ
Engine Breakthrough Components and Subsystems (E-BREAK)
Date du début: 1 oct. 2012, Date de fin: 31 mars 2017,
Future aero engines will need to be more efficient and contribute to the reduction on environmental impact of air transportation. They must reach some standards of performance by reducing emissions and creating some savings on operation costs.EIMG consortium has launched since several years some initiatives to develop future engines in the frame of the European Committee research programmes.Within ...
Voir le projet
48
Participants partenaires
TERMINÉ
The Electric Vehicle revOLUTION enabled by advanced materials highly hybridized into lightweight components for easy integration and dismantling providing a reduced life cycle cost logic (EVOLUTION)
Date du début: 1 nov. 2012, Date de fin: 31 oct. 2016,
Hybrid-EVs and Full-EVs on the market are products where the Internal-Combustion-Engine (ICE) is supplemented by an electric-motor (HEV) or replaced by an all-electric power-train (FEV). Neither approach address lightweight or modularity inheriting the same disadvantages as conventional ICEV - Electrification of mobility must face a conceptual rEVOLUTION! This project breaks the paradigm of curren ...
Voir le projet
25
Participants partenaires
TERMINÉ
Thermal Overall Integrated Conception of Aircraft (TOICA)
Date du début: 1 sept. 2013, Date de fin: 30 sept. 2016,
Thermal behaviour of aircraft has recently become a crucial subject due to many factors: increasing number of complex systems required by modern, more electric, commercial aircraft, the introduction of hotter engines with higher by-pass ratios, the increased use of composite material in aircraft structures, or the confinement of highly dissipative equipment and systems in smaller areas to earn spa ...
Voir le projet
34
Participants partenaires
TERMINÉ
More Affordable Aircraft structure through eXtended, Integrated, and Mature nUmerical Sizing (MAAXIMUS)
Date du début: 1 avr. 2008, Date de fin: 30 sept. 2016,
Even though composite materials are more and more used in modern airframes, many significant improvements are still achievable. Firstly, the substitution of the assembly of many small composite parts by a single one-shot large part provides additional weight reduction. Secondly, the final assembly line process must be adapted to composite properties (lack of ductility, stiffness). Thirdly, if the ...
Voir le projet
60
Participants partenaires
TERMINÉ
Developing Hardware and Design Methodologies for Heterogeneous Low Power Field Programmable Servers (FiPS)
Date du début: 1 sept. 2013, Date de fin: 31 août 2016,
The goal of this project is to reduce the power performance ratio within data-centres by improving the usability and usefulness of FPGAs, embedded CPU (eCPU), GPUs and multi/manycore accelerators in high-performance and low-power heterogeneous computing servers. We target applications between traditional super computing tasks (where huge amount of man-power can be spent for manual algorithm optimi ...
Voir le projet
10
Participants partenaires
TERMINÉ
Efficient Systems and Propulsion for Small Aircraft (ESPOSA)
Date du début: 1 oct. 2011, Date de fin: 30 juin 2016,
The ESPOSA project will develop and integrate novel design and manufacture technologies for a range of small gas turbine engines up to approx. 1000 kW to provide aircraft manufacturers with better choice of modern propulsion units. It will also deal with engine related systems which contribute to the overall propulsion unit efficiency, safety and pilot workload reduction. Through the newly develop ...
Voir le projet
45
Participants partenaires
TERMINÉ
Boltless assembling Of Primary Aerospace Composite Structures (BOPACS)
Date du début: 1 sept. 2012, Date de fin: 29 févr. 2016,
"The main challenge of the BOPACS project is to reduce the weight and costs of primary aerospace structures by developing bolt free adhesive bonded joints that comply with the airworthiness requirements.Until today thin walled composite primary aerospace structures are joined by using a large number of fasteners. Bolt free joining would considerably contribute to the weight and cost reduction of a ...
Voir le projet
14
Participants partenaires
TERMINÉ
Integrating Numerical Simulation and Geometric Design Technology (INSIST)
Date du début: 1 janv. 2012, Date de fin: 31 déc. 2015,
The objective of this ITN is to develop the next generation methods integrating numerical simulation and geometric design technology. Currently, geometric design and simulation is based on different geometry representation hampering the effective design of Engineering structures, materials and components. Isogeometric analysis developed recently tries to remove those drawbacks by integrating CAD s ...
Voir le projet
7
Participants partenaires
TERMINÉ
Smart Intelligent Aircraft Structures (SARISTU)
Date du début: 1 sept. 2011, Date de fin: 31 août 2015,
The project proposal concerns the challenges posed by the physical integration of smart intelligentstructural concepts. It addresses aircraft weight and operational cost reductions as well as animprovement in the flight profile specific aerodynamic performance.This concerns material concepts enabling a conformal, controlled distortion of aerodynamicallyimportant surfaces, material concepts enablin ...
Voir le projet
68
Participants partenaires
TERMINÉ
Novel Electron Beam Surface Sculpting for Efficient Heat Exchange (HEATSCULPTOR)
Date du début: 1 sept. 2013, Date de fin: 31 août 2015,
By combining a new surface engineering process with state-of-the-art thermal modelling, significant design and performance improvements to heat exchangers for electronic and electrical systems can be made. The surface designs created will not only provide an increase in surface area (allowing for smaller size heat exchanger packaging), but also enable ‘designed’ flow over a surface (which will enh ...
Voir le projet
6
Participants partenaires
TERMINÉ
High Integrity Low Distortion Assembly (HILDA)
Date du début: 1 sept. 2012, Date de fin: 31 août 2015,
"HILDA will deliver a cost effective, low distortion welding process for EU shipyards to allow them to maintain competitiveness and produce light, strong, more fuel efficient vessels. The solid state technique will enable the modular construction of dimensionally accurate, high strength, corrosion resistant fabrications across the entire range of steels, enabling the introduction of stronger, toug ...
Voir le projet
8
Participants partenaires
TERMINÉ
Cryogenic Hypersonic Advanced Tank Technologies (CHATT)
Date du début: 1 janv. 2012, Date de fin: 30 juin 2015,
"Topic: Cryogenic propellant management and advanced tank design for hypersonic and advanced future aviation systemsIn future aviation and particularly in hypersonic systems new propellants will be used, such as liquid hydrogen, liquid methane and possibly even liquid oxygen. These systems will require complex technology, ultra light-weight, and reusable propellant tank systems. Challenging techno ...
Voir le projet
11
Participants partenaires
TERMINÉ
Cost Effective Reinforcement of Fastener Areas in Composites (CERFAC)
Date du début: 1 oct. 2010, Date de fin: 31 déc. 2014,
"CERFAC’s major challenge is the design and manufacturing of strong and cost-efficient joints for high performance CFRP aero-structures.In particular, transfer of distributed loading along rivets lines in the assembly of flat or curved thin-walled stiffened panels, and introduction of concentrated loads for connecting lugs with thicker laminates are special & frequent problems. Hence, CERFAC focus ...
Voir le projet
15
Participants partenaires
TERMINÉ
Awareness and Transfer of Innovation in composite materials (Composites)
Date du début: 6 oct. 2008, Date de fin: 30 déc. 2014,
This project aims to reinforce innovation and technology transfer amongst companies in NWE. in order to provide support and assistance throughout the period of profound industrial change linked to the arrival of composite materials. The aim is to rely on the “technological centres of excellence” and on the dynamics that they have created in their area of expertise. whilst providing a favourable cl ...
Voir le projet
13
Participants partenaires
TERMINÉ
Engine Representative Internal Cooling Knowledge and Applications (ERICKA)
Date du début: 1 juil. 2009, Date de fin: 30 juin 2014,
"The goal of ERICKA is to directly contribute to reductions in aircraft engine fuel consumption with a targeted contribution of 1% reduction in SFC relative to engines currently in service. The fuel efficiency of a jet engine used for aircraft propulsion is dependent on the performance of many key engine components. One of the most important is the turbine whose efficiency has a large influence ...
Voir le projet
20
Participants partenaires
TERMINÉ
Low Emission Gas Turbine Technology for Hydrogen-rich Syngas (H2-IGCC)
Date du début: 1 nov. 2009, Date de fin: 30 avr. 2014,
The overall objective of this project is to provide and demonstrate technical solutions which will allow the use of state-of-the-art highly efficient, reliable gas turbines in the next generation of IGCC plants, suitable for combusting undiluted hydrogen-rich syngas derived from a pre-combustion CO2 capture process, with high fuel flexibility. The recognised challenge is to operate a stable and co ...
Voir le projet
25
Participants partenaires
TERMINÉ
Industrialisation of High-Order Methods – A Top-Down Approach (IDIHOM)
Date du début: 1 oct. 2010, Date de fin: 31 mars 2014,
"The proposed IDIHOM project is motivated by the increasing demand of the European aerospace industries to advance their CFD-aided design procedure and analysis by using accurate and fast numerical methods, so-called high-order methods. They will be assessed and improved in a top-down approach by utilising industrially relevant complex test cases, so-called application challenges in the general ar ...
Voir le projet
21
Participants partenaires
TERMINÉ
Integrated management of product heterogeneous data (iProd)
Date du début: 1 févr. 2011, Date de fin: 31 janv. 2014,
Description
iProd aims to improve the efficiency and quality of the Product Development Process of innovative products by developing a flexible, service oriented, customer driven software frameworkData and knowledge management technologies are of strategic importance for industrial innovation, provided they are integrated in the company p ...
Voir le projet
17
Participants partenaires
TERMINÉ
Landing Gear Noise Attenuation (NOISETTE)
Date du début: 1 janv. 2013, Date de fin: 31 janv. 2014,
"Within NOISETTE, Cenaero and VKI combine their respective expertise in computational fluid dynamics and acoustics in order to deliver a tailored solution for the aero-acoustic assessment and design of a low-noise configuration for a regional aircraft nose landing gear. The computational approach relies on performing high quality detached eddy simulations and on using the obtained noise sources fo ...
Voir le projet
2
Participants partenaires
TERMINÉ
Long-Term Advanced Propulsion Concepts and Technologies II (LAPCAT-II)
Date du début: 1 oct. 2008, Date de fin: 31 déc. 2013,
"Lacpat II is a logical follow-up of the previous EC-project which has as objective to reduce antipodal flights to less than 2 to 4 hours. Among the several studied vehicles, only two novel aircraft for a Mach 5 and 8 flight are retained in the present proposal. Starting from the available Mach 5 vehicle and its related precooled turboramjet, assumed performance figures of different components ...
Voir le projet
16
Participants partenaires
TERMINÉ
Development of technology building blocks For structural health monitoring sensing devices in aeronautics (TRIADE)
Date du début: 1 déc. 2008, Date de fin: 31 déc. 2012,
"NEEDS and CONCEPTS: Structural Health Monitoring (SHM) will be very important for Aeronautics. A study from Goodrich stated: "Structural Health Monitoring shows a great potential in terms of cost savings coming from the benefits it would have on inspections which are currently about 25% of the Life Cycle Cost of an airline". Some applications are intended to explore the “out-of-flight domain” con ...
Voir le projet
16
Participants partenaires
TERMINÉ
Industrialization of Manufacturing Technologies for Composite Profiles for Aerospace Applications (IMac-Pro)
Date du début: 1 juil. 2008, Date de fin: 31 déc. 2012,
Main aim of the project is the development of a complete, integrated process chain for the cost effective serial production of various aerospace CFRP stiffener profiles. The production is foreseen in the two steps: Preform manufacturing and infiltration / curing. The project will focus on complex profile geometries with variable cross sections, single or multiple curvature and integrated load int ...
Voir le projet
20
Participants partenaires
TERMINÉ
Future High-Altitude High-Speed Transport 20XX (FAST20XX)
Date du début: 1 déc. 2009, Date de fin: 30 nov. 2012,
"The current project aims at the investigation and development of technologies and steps necessary for approaches to conquer the grey zone between aeronautics and space in Europe, and thus to set the foundation of a new paradigm for transportation in the long term. The underlying concepts considered are a) a European space plane based on an airplane launch approach to advance European know how in ...
Voir le projet
17
Participants partenaires
TERMINÉ
Engine LUBrication SYStem technologies (ELUBSYS)
Date du début: 1 juin 2009, Date de fin: 30 nov. 2012,
"In aeronautics, gas turbine engines are equipped with lubrication systems whose function is to cool and lubricate the highly loaded rolling bearings and gearboxes. Current lubrication systems are based on architectures and technologies that have not much evolved for the last 30 years and that, despite advances made on components, have reached their technological limit. Future aero-engine requirem ...
Voir le projet
20
Participants partenaires
TERMINÉ
valiDation of Radical Engine Architecture systeMs (DREAM)
Date du début: 1 févr. 2008, Date de fin: 31 janv. 2012,
"Since the publication of the ACARE goals, the commercial and political pressure to reduce CO2 has increased considerably. DREAM is the response of the aero-engine community to this pressure. The first major DREAM objective is to design, integrate and validate new engine concepts based on open rotor contra-rotating architectures to reduce fuel consumption and CO2 emissions 7% beyond the ACARE 2020 ...
Voir le projet
46
Participants partenaires
TERMINÉ
Reduced Order Modeling & Optimization: (Constrained) Proper Orthogonal Decomposition (C)POD based surrogates for aircraft design (ROM&O)
Date du début: 18 janv. 2010, Date de fin: 17 déc. 2010,
..., • the surrogate model(s), • the training, • the surrogate model(s) management scheme. The present topic focuses on the second element to be handled by Proper Orthogonal Decomposition (POD). Cenaero possesses the expertise and critical technologies to tackle all these aspects in a coherent way to take a leap forward and make POD techniques truly efficient in an industrial setting. Cenaero propose ...
Voir le projet
1
Participant partenaire
TERMINÉ
Réunir les compétences dispersées en matière de développement dun procédé de soudage innovant dénommé FSW (Friction Stir Welding) appliqué aux alliages daluminium et mis en œuvre notamment dans la construction de systèmes de transport (aéronautique, automobile, ferroviaire,…). Pour la compréhension des phénomènes et en vue dapplications industrielles, ce nouveau procédé nécessite un programme dact ...
Voir le projet