Plus de 40 projets européens trouvés
Recherche sur 125080 projets européens
TERMINÉ
Analytical and Characterisation Excellence in nanomaterial risk assessment: A tiered approach (ACEnano)
Date du début: 1 déc. 2016, Date de fin: 30 nov. 2020,
An increasing number of nanomaterials (NMs) are entering the market in every day products spanning from health care and leisure to electronics, cosmetics and foodstuff. Nanotechnology is a truly enabling technology, with unlimited potential for innovation. However, the novelty in properties and forms of NMs makes the development of a well-founded and robust legislative framework to ensure safe dev ...
Voir le projet
27
Participants partenaires
TERMINÉ
Production of Scandium compounds and Scandium Aluminum alloys from European metallurgical by- products (SCALE)
Date du début: 1 déc. 2016, Date de fin: 30 nov. 2020,
Scandium (Sc) is one of the highest valued elements in the periodic table and an element which is usually grouped in REEs as it shares many characteristics with Yttrium. Scandium technological applications are unique, as it is a key component in producing Solid Oxide Fuel Cells (Scandia-Stabilized-Zirconia solid electrolyte layer) or high strength Aluminum alloys used in aerospace and 3D printing ...
Voir le projet
20
Participants partenaires
TERMINÉ
Smart capture phases for proteomics, glycomics and biomarker assays (BioCapture)
Date du début: 1 nov. 2016, Date de fin: 31 oct. 2020,
The overall objective of BioCapture is to develop novel robust assays for proteinaceous biomarkers associated with cancer and to develop innovative tools for assaying elusive cancer related posttranslational modifications in proteins. This will be achieved by exploiting robust glycan, peptide and protein binders in the form of Molecularly Imprinted Polymers (MIPs) or plastic antibodies alongside g ...
Voir le projet
8
Participants partenaires
TERMINÉ
Fibre break models for designing novel composite microstructures and applications (FiBreMoD)
Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,
Limiting the climate change-induced temperature increase to less than 2°C will require strong reductions in greenhouse gas emissions. Lightweight materials and fibre-reinforced composites in particular, are a key enabling technology to achieve this goal. Current composite applications are however strongly overdesigned due to a lack of reliable design tools and predictive models for their mechanica ...
Voir le projet
10
Participants partenaires
TERMINÉ
Innovation and Networking for Fatigue and Reliability Analysis of Structures - Training forAssessment of Risk (INFRASTAR)
Date du début: 1 mai 2016, Date de fin: 30 avr. 2020,
INFRASTAR aims to develop knowledge, expertise and skill for optimal and reliable management of structures. The generic methodology will be applied to bridges and wind turbines in relation to fatigue offering the opportunity to deal with complementary notions (such as old and new asset management, unique and similar structures, wind and traffic actions) while addressing 3 major challenges: 1/adv ...
Voir le projet
8
Participants partenaires
TERMINÉ
European Centre for Risk Management and Safe Innovation in Nanomaterials Nanotechnologies (EC4SafeNano)
Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,
A significant challenge to ensuring sustainable production and use of nanotechnologies is to understand safety and health risks of the technology and its end-products, and to implement practical strategies to manage these risks. Knowledge is growing rapidly, but effective use of this knowledge for risk management is lagging behind. We therefore need to bridge the gap between knowledge on hazard an ...
Voir le projet
17
Participants partenaires
TERMINÉ
BEYOND STATE-OF-THE-ART TECHNOLOGIES FOR POWER AC CORRIDORS AND MULTI-TERMINAL HVDC SYSTEMS (BEST PATHS)
Date du début: 1 oct. 2014, Date de fin: 30 sept. 2018,
"A group of eight Transmission System Operators with a generator company, manufacturers and research organisations, propose 5 demonstration projects to remove, in 4 years, several barriers which prevent large-scale penetration of renewable electricity production in the European transmission network. The full scale demonstrations led by industry aim at proving the benefits of novel technologies cou ...
Voir le projet
39
Participants partenaires
TERMINÉ
Laser-induced Nanostructures as Biomimetic Model of Fluid Transport in the Integument of Animals (LiNaBioFluid)
Date du début: 1 juil. 2015, Date de fin: 30 juin 2018,
The integument of an animal body has various functions, which are often achieved by specific micro- and/or nano- hierarchical structures. Examples are the very low water friction and air retention of water spiders or the swim fern of salvinia and the outstanding adhesion properties of geckos. In this project, we will employ advanced laser-processing strategies based on self-organization, to mimic ...
Voir le projet
7
Participants partenaires
TERMINÉ
FUEL FLEXIBLE, NEAR -ZERO EMISSIONS, ADAPTIVE PERFORMANCE MARINE ENGINE (HERCULES-2)
Date du début: 1 mai 2015, Date de fin: 30 avr. 2018,
The project HERCULES-2 is targeting at a fuel-flexible large marine engine, optimally adaptive to its operating environment. The objectives of the HERCULES-2 project are associated to 4 areas of engine integrated R&D:• Improving fuel flexibility for seamless switching between different fuel types, including non-conventional fuels.• Formulating new materials to support high temperature component ap ...
Voir le projet
33
Participants partenaires
TERMINÉ
ISOTOPIC TOOLS AS NOVEL SENSORS OF EARTH SURFACE RESOURCES (IsoNose)
Date du début: 1 mars 2014, Date de fin: 28 févr. 2018,
Soil, water, and precious metals are major natural resources present at the Earth´s terrestrial surface and their efficient management is essential for future sustainable development. Their availability is regulated by massive biogeochemical transformations that take place as the chemical elements move from rock to soil, into plants, through ground water, into river water, and into ore deposits. T ...
Voir le projet
8
Participants partenaires
TERMINÉ
Integrated Control and Sensing for Sustainable Operation of Flexible Intensified Processes (CONSENS)
Date du début: 1 janv. 2015, Date de fin: 31 déc. 2017,
Intensified continuous processes are a key innovation of the last decade for the production of high quality, high value and customer-specific products at competitive prices in a sustainable fashion. To realize the potential of this technology, key steps must be made towards long-term stable, tightly controlled and fully automated production. The goal of the CONSENS project is to advance the contin ...
Voir le projet
15
Participants partenaires
TERMINÉ
Nanometrology Standardization Methods for Magnetic Nanoparticles (NANOMAG)
Date du début: 1 nov. 2013, Date de fin: 31 oct. 2017,
The NanoMag project is to improve and redefine existing analyzing methods and in some cases, to develop new analyzing methods for magnetic nanostructures. Using improved manufacturing technologies we will synthesize magnetic nanoparticles with specific properties that will be analyzed with a multitude of characterization techniques (focusing on both structural as well as magnetic properties) and b ...
Voir le projet
18
Participants partenaires
TERMINÉ
Development of an integrated approach based on validated and standardized methods to support the implementation of the EC recommendation for a definition of nanomaterial (NANODEFINE)
Date du début: 1 nov. 2013, Date de fin: 31 oct. 2017,
Nanotechnology is a key enabling technology. Still existing uncertainties concerning EHS need to be addressed to explore the full potential of this new technology. One challenge consists in the development of methods that reliably identify, characterize and quantify nanomaterials (NM) both as substance and in various products and matrices. The European Commission has recently recommended a definit ...
Voir le projet
30
Participants partenaires
TERMINÉ
Development of Novel Analytical Methods to assess Nanoparticle cytotoxicity (NanoCytox)
Date du début: 1 nov. 2015, Date de fin: 31 oct. 2017,
Nanoparticles , NPs, are being used to produce novel materials with unique physico-chemical properties with many applications in fields such as medicine, energy and electronics, consumer goods, among others. Some studies have revealed that the same specific properties that make NPs so unique could also be responsible for potential harmful effects on the environment and human health. Currently, the ...
Voir le projet
1
Participant partenaire
TERMINÉ
Training & Research Involving Polymer Optical Devices (TRIPOD)
Date du début: 1 oct. 2013, Date de fin: 30 sept. 2017,
The project is located in the field of optical fibre sensors - an area where Europe has developed internationally competitive research and commercial activity. The aim is to significantly extend the range of application of optical fibre grating sensors by developing a mature version of the technology in polymer optical fibres and thereby increase European competitiveness.Polymer fibres offer some ...
Voir le projet
8
Participants partenaires
TERMINÉ
Healthier Life with Eco-innovative Components for Housing Constructions (H-House)
Date du début: 1 sept. 2013, Date de fin: 31 août 2017,
H-House is aiming at the development of a number of building components for modern society where awareness for environmental aspects and living comfort are not compromised but complementing each other. The concept of H-House aims at components for the building envelope and components for the interior applied to both new buildings and for renovation. The purpose of an adequate building envelope is ...
Voir le projet
12
Participants partenaires
TERMINÉ
Cost-effective and sustainable Bio-Renewable Indoor Materials with high potential for customisation and creative design in Energy Efficient buildings (BRIMEE)
Date du début: 1 juil. 2013, Date de fin: 30 juin 2017,
"The challenge of today lies in the accomplishment of sustainable and low-energy buildings, which can combine at the same time the thermal insulation properties with healthy, comfortable, accessible and safe indoor environment. Reduction of the energy demand through the use of insulating materials still remains a challenge for European architects and building designers as well as materials produce ...
Voir le projet
15
Participants partenaires
TERMINÉ
Shape-engineered TiO2 nanoparticles for metrology of functional properties: setting design rules from material synthesis to nanostructured devices (SETNanoMetro)
Date du début: 1 déc. 2013, Date de fin: 31 mars 2017,
According to European Commission [EC, COM (2012) 572, 3.10.2012] important challenges at European level are related to the establishment of validated method and instrumentation for detection, characterization and analysis of nanoparticles.In the framework of the SETNanometro project, the use of various measurement techniques for the determination of the NPs properties will allow to move from the c ...
Voir le projet
16
Participants partenaires
TERMINÉ
SEC-2012.1.3.2- Homemade explosives (HMEs) and recipes characterisation- Capability (HOMER)
Date du début: 1 nov. 2013, Date de fin: 31 déc. 2016,
The objective is to establish basic knowledge hitherto unknown about HMEs; their composition and characterisation. The task is also to review freely available recipes (for instance on internet) and to evaluate their dangerousness. During the study, several basic questions should be answered, how can HMEs be produced from ordinary commercially available chemicals and materials? What type of chemic ...
Voir le projet
10
Participants partenaires
TERMINÉ
Production of Coatings for New Efficient and Clean Coal Power Plant Materials (POEMA)
Date du début: 1 janv. 2013, Date de fin: 31 déc. 2016,
"The overall objective is the development of new coatings for supercritical steam power plants for efficient and clean coal utilization. A significant reduction of emissions is expected by increasing efficiencies to ŋ > 50%. Currently, an efficiencies of 45% have been achieved in the last 30 years from subcritical 180 bar/540ºC to ultra-supercritical 300 bar/600-620ºC corresponding to a specific ...
Voir le projet
14
Participants partenaires
TERMINÉ
"The Singlet Oxygen Strategy: sustainable oxidation procedures for applications in material science, synthesis, wastewater treatment, diagnostics and therapeutics" (SO2S)
Date du début: 1 janv. 2013, Date de fin: 31 déc. 2016,
"The SO2S network seeks to exploit Singlet Oxygen (1O2) as a green and benign oxidant for use in novel synthetic methodologies, crosslinking strategies, bioconjugation procedures and materials production. The chemistry described herein generates the means to both understand and influence biological systems by providing probes and reagents – from analytical methods to new drugs - and to modulate ma ...
Voir le projet
9
Participants partenaires
TERMINÉ
Integrity Testing of Deep Foundation Piles (PileInspect)
Date du début: 1 déc. 2013, Date de fin: 30 nov. 2016,
A hundred thousand kilometres of piles are installed yearly in Europe. Problems can occur during pile driving including spalling of concrete at the pile’s head or point and transverse or spiral cracking. Industry figures suggest that as many as 3-5% of piles fail during installation. If a failure is detected, the cost of that pile is increased 4 times due to the remedial work needed to replace it. ...
Voir le projet
10
Participants partenaires
TERMINÉ
Innovative Sensor for the fast Analysis of Nanoparticles in Selected Target Products (INSTANT)
Date du début: 1 mars 2012, Date de fin: 30 nov. 2015,
INSTANT will face the challenge of the detection, identification and quantification of engineered nanoparticles (ENPs) in complex matrices such as cosmetic products and engineered food and drinks. Therefore, new detection methods and technologies are mandatory. This is completely in line with the Call FP7-NMP.2011.1.3-1 which deals especially with innovative, practically implementable and cost eff ...
Voir le projet
11
Participants partenaires
TERMINÉ
Development of reference methods for hazard identification, risk assessment and LCA of engineered nanomaterials (NANOVALID)
Date du début: 1 nov. 2011, Date de fin: 31 oct. 2015,
The growing development, production and use of engineered nanomaterials and associated products will increase exposure of both humans and ecosystems to these new materials. However, current knowledge is still incomplete and established test methods are as yet inappropriate to reliably assess the extent of exposure and risk of materials at the nano-scale. There is an urgent need to develop methods ...
Voir le projet
32
Participants partenaires
TERMINÉ
Integrating European Infrastructure to support science and development of Hydrogen- and Fuel Cell Technologies towards European Strategy for Sustainable, Competitive and Secure Energy (H2FC)
Date du début: 1 nov. 2011, Date de fin: 31 oct. 2015,
"The European Strategy Forum on Research Infrastructures (ESFRI) recognizes in its roadmap for Research Infrastructures that ""in the near future, hydrogen, as an energy carrier derived from a number of other fuels, and fuel cells, as energy transformers, are expected to play a major role, for mobile and stationary applications"". With the current fragmentation of the European R&D infrastructures ...
Voir le projet
20
Participants partenaires
TERMINÉ
High Pressure Hydrogen All Electrochemical Decentralized RefUeling Station (PHAEDRUS)
Date du début: 1 nov. 2012, Date de fin: 31 oct. 2015,
PHAEDRUS addresses the complete scope and objectives of Topic SP1-JTI-FCH.2011.1.8. A new concept and new technologies for a hydrogen retail refuelling system are developed.The major objective is to develop and validate a new concept for 70 MPa hydrogen refuelling retail stations by showing the applicability of electrochemical hydrogen compression technology in combination with a PEM electrolyser, ...
Voir le projet
10
Participants partenaires
TERMINÉ
Sustainable sewage sludge management fostering phosphorus recovery and energy efficiency (P-REX)
Date du début: 1 sept. 2012, Date de fin: 31 août 2015,
Phosphorus is one essential element of life, which can neither be produced synthetically nor substituted by any other substance. Its importance as plant nutrient is emphasized by the huge amount of 975 000 tons of phosphorus annually imported into Europe to sustain good harvests. While phosphorus is a limited fossil element, its extensive recovery from “secondary deposits” is of paramount importan ...
Voir le projet
15
Participants partenaires
TERMINÉ
Development of Quantitative Radiographic Tomography technology for the in-situ Inspection of welded austenitic safety critical pipework in the nuclear power generation and petrochemical industries (TomoWELD)
Date du début: 1 janv. 2013, Date de fin: 30 avr. 2015,
Austenitic stainless steel is often used in the construction of critical pipework in nuclear power plant and petrochemical plant due to its resistance to corrosion and its high fracture resistance. Pipelines are usually constructed by joining sections of pipe together, using welding. These welds can host many types of defects that may go undetected if not inspected and in-service and under stress ...
Voir le projet
7
Participants partenaires
TERMINÉ
Coordination of European Research on Industrial Safety towards Smart and Sustainable Growth (SAF€RA)
Date du début: 1 avr. 2012, Date de fin: 31 mars 2015,
Industrial safety is an enabling and important success-factor in the pursuit of beneficial business activities. For this reason, industrial safety is a vital and important prerequisite for sustainable growth and competitiveness of the EU. Therefore, there is an urgent need to refocus the resources of national research programmes in EU Member States on industrial safety since the problems related t ...
Voir le projet
22
Participants partenaires
TERMINÉ
Autonomous robotic system for thermo-graphic detection of cracks (ThermoBot)
Date du début: 1 janv. 2012, Date de fin: 31 déc. 2014,
Non-destructive testing of components is an important auxiliary process step, not only in post-production but also in regular maintenance. The detection of cracks is currently done by using magnetic particle inspection, which is a decades-old, inefficient and ecologically undesirable process. There is an urgent need in industry to replace this technology with more up-to-date methods that provide f ...
Voir le projet
8
Participants partenaires
TERMINÉ
Integrated Magnetic imAgery based on spIntronics Components (IMAGIC)
Date du début: 1 sept. 2011, Date de fin: 31 déc. 2014,
Structures reliability, installations safety and products quality are requirements that industrial sectors must take into account. The stake is to guarantee the integrity of the structures. In transport and nuclear fields, a major stake of people safety is associated. To take up this challenge, industries are users of non destructive testing (NDT) which gathers methods providing information on the ...
Voir le projet
7
Participants partenaires
TERMINÉ
Cost-effective and reliable hydrogen sensors for facilitating the safe use of hydrogen (H2Sense)
Date du début: 1 juin 2013, Date de fin: 31 août 2014,
This project is related to the effective deployment and availability of reliable hydrogen sensors, primarily but not exclusively for use in applications using hydrogen as an alternative fuel.The objective is to support and unite stakeholders including sensor manufactures/developers, sensor end-users, certification bodies and independent sensor evaluators having the aim to avoid any hazardous event ...
Voir le projet
7
Participants partenaires
TERMINÉ
Multiscale reinforcement of semi-crystalline thermoplastic sheets and honeycombs (M-RECT)
Date du début: 15 avr. 2010, Date de fin: 14 avr. 2014,
The M-RECT project aims to create multiscale-reinforced semi-crystalline thermoplastics (PEEK and PPS), which will outperform all reinforced polymers in terms of strength, stiffness, creep and mainly damping by upscaling and further developing state of the art production methods, within cost-efficient manufacturing routes. The envisaged multiscale reinforcement will comprise of dispersed straighte ...
Voir le projet
23
Participants partenaires
TERMINÉ
Enhanced Design Requirements and Testing Procedures for Composite Cylinders intended for the Safe Storage of Hydrogen (HyCOMP)
Date du début: 1 janv. 2011, Date de fin: 31 mars 2014,
Hydrogen storage is a key enabling technology for the use of hydrogen as an energy vector. To improve volumetric and gravimetric performance, carbon fiber composite cylinders are currently being developed. However, current standards governing the design, qualification and in-service inspection of carbon fiber composite cylinders do not allow cylinder design to be optimized. In particular, safet ...
Voir le projet
12
Participants partenaires
TERMINÉ
Standardising the nano-scratch test (NANOINDENT-plus)
Date du début: 1 sept. 2012, Date de fin: 28 févr. 2014,
This project will further develop, validate and draft standards for nano-scratching, which is an important new tool to investigate the tribological properties of materials on a scale relevant to the fundamental mechanisms of wear. It will facilitate the development of new coatings and engineered surfaces that will give impact through improved competitiveness of industry and a better quality of lif ...
Voir le projet
9
Participants partenaires
TERMINÉ
"Development of a Common Sensor Platform for the Detection of IED ""Bomb Factories""" (CommonSense)
Date du début: 1 janv. 2011, Date de fin: 31 déc. 2013,
The detection of IED manufacturing facilities is crucial for the security of citizens, as well as infrastructures and utilities. Current sensing methods suffer from susceptibility to false positive results due to environmental contaminants, or false negative results to interfering compounds. The need exists for a single distributed network, with a common interface and communications protocol, to m ...
Voir le projet
8
Participants partenaires
TERMINÉ
Railway Induced Vibration Abatement Solutions (RIVAS)
Date du début: 1 janv. 2011, Date de fin: 31 déc. 2013,
"Ground vibration, effected by rail services, is an important environmental concern, affecting European citizens nearby any rail infrastructure. Surveys show that many Europeans are subjected to annoying levels of feelable vibration and vibration-induced noise. Although solutions are available for track in tunnels, tracks at grade are a much more extensive problem even for vibration-induced noise. ...
Voir le projet
27
Participants partenaires
TERMINÉ
Smart Management for Sustainable Human Environment (SmartEN)
Date du début: 1 déc. 2009, Date de fin: 30 nov. 2013,
There are increasing concerns regarding the environmental impact of human actions, the use of the environment and climate changes. These are coupled with ageing infrastructure systems, continuously growing and changing demands on the built and natural environments as well as limited financial and depleting natural resources. Until now, research has been focused on the development of proactive risk ...
Voir le projet
12
Participants partenaires
TERMINÉ
Composite Structural Power Storage for Hybrid Vehicles (StorAGE)
Date du début: 1 janv. 2010, Date de fin: 30 juin 2013,
Weight is a premium; any material which does not contribute to load-carrying capacity is structurally parasitic. The focus of StorAGE is an key example; energy storage. Conventional design attempts to maximise the efficiency of the individual subcomponents. A different approach is to create novel multifunctional materials that simultaneously perform more than one function, thus offering significan ...
Voir le projet
9
Participants partenaires
TERMINÉ
Early Recognition, Monitoring and Integrated Management of Emerging, New Technology Related Risks (iNTeg-Risk)
Date du début: 1 déc. 2008, Date de fin: 31 mai 2013,
iNTeg-Risk is a large-scale integrating project aimed at improving the management of emerging risks in the innovative industry. This will be achieved by building a new risk management paradigm for emerging risks, which is a set of principles supported by a common language, commonly agreed tools & methods and Key Performance Indicators integrated into a single framework. As main impact, it will red ...
Voir le projet