Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Engine Mount System for Ultra High Pass Engine (EMS UHPE)

Date du début: 15 mars 2016, Date de fin: 14 févr. 2022,

Our consortium is applying for the Engine Mounts System (EMS) of the Ultra High Propulsive Efficiency. Our 3 objectives are:1. Assist the Engine Manufacturer & the Airframer in the evaluation & selection of the most promising & suitable Engine Mounts System (EMS) configuration. Criteria for evaluation: weight, cost, dynamic performance, certification, impact on engine & aircraft assembly.2. Design...
Voir le projet

 5

 TERMINÉ 

Distribution and Gauging Interconnected Fuel System for the Next Generation Civil Tilt Rotor (NGCTR DIGIFuel)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2021,

Secondo Mona, an established Italian aerospace SME with over 100 years of contributions to the aerospace industry, proposes to design, develop, test and qualify a high reliability integrated Fuel Gauging and Distribution System (DIGIFuel), providing active CG management, for the NGCTR. Politecnico di Milano will collaborate on new technology developments, especially about power and data transmissi...
Voir le projet

 2

 TERMINÉ 

A.dditive MA.nufacturing for T.iltrotor HO.using (AMATHO)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2021,

AMATHO (A.dditive MA.nufacturing T.iltrotor HO.using) is aimed to design, assess and manufacture a novel tiltrotor drive system housing exploiting the features of additive manufacturing techniques. Preliminarily, functional, structural and technological peculiarities of rotorcraft main gearbox housings are analysed and relevant requirements are issued. In the meantime, viable AM processes are revi...
Voir le projet

 3

 TERMINÉ 

Structured Reactors with INTensified ENergy Transfer for Breakthrough Catalytic Technologies (INTENT)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2021,

Critically important heterogeneous catalytic reactions for energy conversion and chemicals production have been run for several decades in fixed bed reactors randomly packed with catalyst pellets, whose operation is intrinsically limited by slow heat removal/supply. There is urgent need for a new generation of process equipment and chemical reactors to address the current quest for process intensi...
Voir le projet

 1

 TERMINÉ 

Data-Driven Genomic Computing (GeCo)

Date du début: 1 sept. 2016, Date de fin: 31 août 2021,

Next-generation sequencing technology has dramatically reduced the cost and time of reading the DNA. Huge investments are targeted to sequencing the DNA of large populations, and repositories of well-curated sequence data are being collected. Answers to fundamental biomedical problems are hidden in these data, e.g. how cancer arises, how driving mutations occur, how much cancer is dependent on env...
Voir le projet

 1

 TERMINÉ 

Control for Orbit Manoeuvring through Perturbations for Application to Space Systems (COMPASS)

Date du début: 1 août 2016, Date de fin: 31 juil. 2021,

Space benefits mankind through the services it provides to Earth. Future space activities progress thanks to space transfer and are safeguarded by space situation awareness. Natural orbit perturbations are responsible for the trajectory divergence from the nominal two-body problem, increasing the requirements for orbit control; whereas, in space situation awareness, they influence the orbit evolut...
Voir le projet

 1

 TERMINÉ 

Structure-dependent microkinetic modelling of heterogeneous catalytic processes (SHAPE)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2021,

Despite the fact that the catalyst structure has been an important factor in catalysis science since the discovery of structure sensitive reactions in single crystal studies, its effect on reactivity is neglected in state-of-the-art microkinetic modelling. In reality, the catalyst is dynamic by changing its structure, shape and size in response to the different conditions in the reactor. Thus, the...
Voir le projet

 1

 TERMINÉ 

European Training Network on Sustainable Multi-functional Automated Resilient Transport Infrastructures. (SMARTI ETN)

Date du début: 1 mars 2017, Date de fin: 28 févr. 2021,

Sustainable Multi-functional Automated Resilient Transport Infrastructures ETN, will bring together a stimulating platform where the stakeholders of the transport infrastructure sector will work alongside world-wide experts in smartening of systems (developers of high-tech sensors, advanced monitoring equipment, automated structures, etc.,) with direct support from the roads, railways and airport...
Voir le projet

 9

 TERMINÉ 

IMPROVING PHOTOSYNTHETIC SOLAR ENERGY CONVERSION IN MICROALGAL CULTURES FOR THE PRODUCTION OF BIOFUELS AND HIGH VALUE PRODUCTS (SOLENALGAE)

Date du début: 1 mars 2016, Date de fin: 28 févr. 2021,

Solar Energy is the most abundant renewable energy source available for our Planet. Light energy conversion into chemical energy by photosynthetic organisms is indeed the main conversion energy step, which originated high energy containing fossil deposits, now being depleted. By the way, plant or algae biomass may still be used to produce biofuels, as bio-ethanol, bio-diesel and bio-hydrogen. Micr...
Voir le projet

 3

 TERMINÉ 

integrated Smart GRID Cross-Functional Solutions for Optimized Synergetic Energy Distribution, Utilization Storage Technologies (inteGRIDy)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

inteGRIDy aims to integrate cutting-edge technologies, solutions and mechanisms in a scalable Cross-Functional Platform connecting energy networks with diverse stakeholders, facilitating optimal and dynamic operation of the Distribution Grid (DG), fostering the stability and coordination of distributed energy resources and enabling collaborative storage schemes within an increasing share of renewa...
Voir le projet

 31

 TERMINÉ 

Localized Surface Plasmon Resonance in doped semiconductor nanocrystals (SONAR)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

Doped semiconductor nanocrystals (dSNCs) are an exciting emerging material. Carrier densities in the range of 1020-1021cm-3 lead to localized surface plasmon resonances (LSPRs) in the near infrared (NIR). Prominent examples are copper chalcogenides, where doping occurs via vacancy formation, and metal oxides (MOs) that show plasmonic response due to impurity doping. Excitingly, both materials disp...
Voir le projet

 4

 TERMINÉ 

Optical Infrared Coordination Network for Astronomy (OPTICON)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

Europe has become a global leader in optical-near infrared astronomy through excellence in space and ground-based experimental and theoretical research. While the major infrastructures are delivered through major national and multi-national agencies (ESO, ESA) their continuing scientific competitiveness requires a strong community of scientists and technologists distributed across Europe’s nations...
Voir le projet

 34

 TERMINÉ 

Uncertainty Treatment and OPtimisation In Aerospace Engineering (UTOPIAE)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

In an expanding world with limited resources and increasing uncertainty, optimisation and uncertainty quantification become a necessity. Optimisation can turn a problem into a solution, thus the main focus of this ETN is to explore and develop new approaches to treat uncertainty in complex engineering systems and use novel optimisation techniques to efficiently deal with large scale problems with ...
Voir le projet

 12

 TERMINÉ 

Single Point Of aTtachment communications empowered by cLoud computing and bIG data analytics running on-top of massively distributed and loosely-coupled Heterogeneous mobile data neTworks (SPOTLIGHT)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

To handle the unprecedented demand for mobile data traffic, different vendors, operators and research programmes have aimed to develop radio access technologies (RATs) that boost physical-layer link capacity, utilize millimeter wave radio, or further densify network topology. Notable steps have also been made towards shifting baseband processing from the (currently) ultra dense network edge to a c...
Voir le projet

 10

 TERMINÉ 

Sharing Cities (SHAR-LLM)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2020,

Sharing Cities has four key objectives. 1) To achieve scale in the European smart cities market by proving that properly designed smart city solutions, based around common needs, can be integrated in complex urban environments. This will be done in a way that exhibits their true potential and allows for the significant scale-up and consequent increase in social, economic and environmental value....
Voir le projet

 36

 TERMINÉ 

Smart optical and ultrasound diagnostics of breast cancer (SOLUS)

Date du début: 1 déc. 2016, Date de fin: 30 nov. 2020,

SOLUS is a trans-disciplinary 48-month project bringing together 9 partners: industries (4), academic and clinical institutions from 5 countries (engineers, physicists and radiologists) representing cutting-edge expertise in their fields, to develop an innovative non-invasive, point-of-care, low-cost, easy-to-operate, multi-modal imaging system (diffuse optics and ultrasounds/shear wave elastograp...
Voir le projet

 10

 TERMINÉ 

European Training Network for Cell-based Regenerative Medicine (Training4CRM)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2020,

The main objective of Training4CRM is to train a new generation of 15 highly inter-disciplinary early stage researchers at the highest international level and quality, who will be immediately employable in both the academic and industrial sectors due to their highly sought after cross- and interdisciplinary insights and expertise. Training4CRM addresses existing gaps within Cell-based Regenerative...
Voir le projet

 9

 TERMINÉ 

FLExible Dimethyl ether production from biomass Gasification with sorption-enhancED processes (FLEDGED)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2020,

The FLEDGED project will deliver a process for Bio-based dimethyl Ether (DME) production from biomass. The FLEDGED project will combine a flexible sorption enhanced gasification (SEG) process and a novel sorption enhanced DME synthesis (SEDMES) process to produce DME from biomass with an efficient and low cost process.The primary aim of FLEDGED project is to develop a highly intensified and flexib...
Voir le projet

 11

 TERMINÉ 

Network for Innovative Training on ROtorcraft Safety (NITROS)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2020,

Helicopters and the other vertical flight vehicles, like tilt-rotors, compound helicopters, hybrids and rapidly expanding class of easy to fly vertical take-off personal vehicles, are expected to see widespread use in the future especially as means of transport, exploiting the formidable capability to provide point-to-point connections.However, if the expansion of the usage of rotorcraft vehicles ...
Voir le projet

 4

 TERMINÉ 

Integrated Zero Defect Manufacturing Solution for High Value Adding Multi-stage Manufacturing systems (ForZDM)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,

"Manufacturing companies are continuously facing the challenge of operating their manufacturing processes and systems in order to deliver the required production rates of high quality products of increasing complexity, with limited use and waste of resources. "Zero Defect Manufacturing" (ZDM) is a recent paradigm aiming at going beyond traditional six-sigma approaches in highly technology intensiv...
Voir le projet

 13

 TERMINÉ 

Exploring the New Science and engineering unveiled by Ultraintense ultrashort Radiation interaction with mattEr (ENSURE)

Date du début: 1 sept. 2015, Date de fin: 31 août 2020,

With the ENSURE project I aim at attaining ground-breaking results in the field of superintense laser-driven ion acceleration, proposing a multidisciplinary research program in which theoretical, numerical and experimental research will be coherently developed in a team integrating in an unprecedented way advanced expertise from materials engineering and nanotechnology, laser-plasma physics, compu...
Voir le projet

 1

 TERMINÉ 

DAFNE: Use of a Decision-Analytic Framework to explore the water-energy-food NExus in complex and trans-boundary water resources systems of fast growing developing countries. (DAFNE)

Date du début: 1 sept. 2016, Date de fin: 31 août 2020,

Global trends in population growth and rising economic prosperity will increase the demand for energy, food and water, with more severe impact in fast-growing economies, such as in several African countries. The constraints on water, energy, and food could well hamper economic development, lead to social and geopolitical tensions, and cause lasting environmental damage. DAFNE advocates an integrat...
Voir le projet

 13

 TERMINÉ 

INTEGRATED MODEL GUIDED PROCESS OPTIMIZATION OF STEAM CRACKING FURNACES (IMPROOF)

Date du début: 1 sept. 2016, Date de fin: 31 août 2020,

The objective of the project IMPROOF is to drastically improve the energy efficiency of steam cracking furnaces by at least 20%, in a cost effective way, while simultaneously reducing emissions of greenhouse gasses and NOx per ton ethylene produced by at least 25%. One important way to reduce the energy input in steam cracking furnaces is to reduce coke formation on the reactor wall. The use of ei...
Voir le projet

 11

 TERMINÉ 

REsistive-Switch CompUting bEyond CMOS (RESCUE)

Date du début: 1 août 2015, Date de fin: 31 juil. 2020,

Digital computers rely today on CMOS (complementary metal-oxide-semiconductor) technology, which improves its performance every generation thanks to the Moore’s law of downscaling. As CMOS transistor size approaches few nm, alternative logic switches with better scaling capability must be identified to prolong Moore’s law beyond CMOS. Among the emerging switching concepts, resistive switching (RS)...
Voir le projet

 1

 TERMINÉ 

Very fast Imaging by Broadband coherent RAman (VIBRA)

Date du début: 1 juin 2015, Date de fin: 31 mai 2020,

The VIBRA project aims at developing an innovative microscope for real-time non-invasive imaging of cells and tissues, which promises to have a revolutionary impact on several fields of biology and medicine. Chemically specific vibrational signatures of molecules enable their direct structural characterization. Reliable and quantitative endogenous bio-markers can be established, e.g., to follow ce...
Voir le projet

 1

 TERMINÉ 

Adaptive Management of Barriers in European Rivers (AMBER)

Date du début: 1 juin 2016, Date de fin: 31 mai 2020,

Rivers rank among some of the most threatened ecosystems in the world, and are the focus of costly restoration programmes that cost billions to taxpayers. Much of Europe depends on water from rivers for drinking, food production, and the generation of hydropower, which is essential for meeting the EU renewable energy target. Yet only half the EU surface waters have met the WFD’s 2015 target of goo...
Voir le projet

 21

 TERMINÉ 

Restoring Trust in the cyber space: a Systems Security Proposal (PROTASIS)

Date du début: 1 mai 2016, Date de fin: 30 avr. 2020,

Fueled by a string of high profile attacks and recent revelations about unprecedented cyber surveillance, interest in systems security is rising-not just among industry and governments, but even among individual citizens across Europe. Corporate organizations worry about the viability of their businesses, nation states about cyber attacks by other nation states or terrorist groups, and citizens ab...
Voir le projet

 6

 TERMINÉ 

Mechanobiology of nuclear import of transcription factors modeled within a bioengineered stem cell niche. (NICHOID)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2020,

Many therapeutic applications of stem cells require accurate control of their differentiation. To this purpose there is a major ongoing effort in the development of advanced culture substrates to be used as “synthetic niches” for the cells, mimicking the native ones. The goal of this project is to use a synthetic niche cell culture model to test my revolutionary hypothesis that in stem cell differ...
Voir le projet

 2

 TERMINÉ 

MOtivating end-users Behavioral change by combined ICT based tools and modular Information services on energy use, indoor environment, health and lifestyle (MOBISTYLE)

Date du début: 1 oct. 2016, Date de fin: 31 mars 2020,

The overall aim of MOBISTYLE is to raise consumer awareness and awareness of ownership, thus empowering consumers and providing confidence of choosing the right thing, by providing attractive tailor-made combined knowledge services on energy use, indoor environment, health and lifestyle, by ICT-based solutions. This awareness will support and motivate end-users to well informed pro-active behavi...
Voir le projet

 10

 TERMINÉ 

Chip-scale INtegrated Photonics for the mid-Infra REd (INsPIRE)

Date du début: 1 avr. 2015, Date de fin: 31 mars 2020,

Mid-infrared (mid-IR) spectroscopy is a nearly universal way to identify chemical and biological substances, as most of the molecules have their vibrational and rotational resonances in the mid-IR wavelength range. Commercially available mid-IR systems are based on bulky and expensive equipment, while lots of efforts are now devoted to the reduction of their size down to chip-scale dimensions. The...
Voir le projet

 2

 TERMINÉ 

Rail Infrastructure Systems Engineering Network (RISEN)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2020,

Social and economic growth, security and sustainability in Europe are at risk of being compromised due to aging and failing railway infrastructure systems. This partly reflects a recognised skill shortage in railway infrastructure engineering. This project, RISEN, aims to enhance knowledge creation and transfer using both international and intersectoral secondment mechanisms among European Advance...
Voir le projet

 13

 TERMINÉ 

Enhanced Delivery Ecosystem for Neurosurgery in 2020 (EDEN2020)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2020,

Due to an aging population and the spiralling cost of brain disease in Europe and beyond, EDEN2020 aims to develop the gold standard for one-stop diagnosis and minimally invasive treatment in neurosurgery. Supported by a clear business case, it will exploit the unique track record of leading research institutions and key industrial players in the field of surgical robotics to overcome the current ...
Voir le projet

 9

 TERMINÉ 

Zero-defect manufacturing strategies towards on-line production management for European factories (Z-Fact0r)

Date du début: 1 oct. 2016, Date de fin: 31 mars 2020,

Manufacturing represents approximately 21 % of the EU’s GDP and 20 % of its employment, providing more than 30 million jobs in 230 000 enterprises, mostly SMEs. Moreover, each job in industry is considered to be linked to two more in related services. European manufacturing is also a dominant element in international trade, leading the world in areas such as automotive, machinery and agricultural ...
Voir le projet

 13

 TERMINÉ 

Laser and Ultrasound Co-Analyzer for thyroid nodules (LUCA)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2020,

This is a trans-disciplinary project that joins endocrinologists (“end-users”), radiologists (“end-users”), physicists who are experts in medical photonics, engineers who are experts in photonics and ultrasonics and the industry to work towards a concentrated goal - to produce a novel, point-of-care, low-cost, screening device that combines two photonics systems (near-infrared diffuse correlation ...
Voir le projet

 8

 TERMINÉ 

SMart weArable Robotic Teleoperated Surgery (SMARTsurg)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

Robot-assisted minimally invasive surgery (RAMIS) offers many advantages when compared to traditional MIS, including improved vision, precision and dexterity. While the popularity of RAMIS is steadily increasing, the potential for improving patient outcomes and penetrating into many procedures is not fully realised, largely because of serious limitations in the current instrumentation, control and...
Voir le projet

 11

 TERMINÉ 

Dependability Engineering Innovation for CPS - DEIS (DEIS)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

Cyber-Physical-Systems harbor the potential for vast economic and societal impact in all major application domains, however in case of failure this may lead to catastrophic results for industry and society. Thus, ensuring the dependability of such systems is the key to unlocking their full potential and enabling European industries to develop confidently business models that will nurture their soc...
Voir le projet

 10

 TERMINÉ 

Brain injury and trauma monitoring using advanced photonics (BitMap)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

Our vision is to develop a suite of standardised non-invasive devices that will provide essential information about brain health in neurocritical care and neuromonitoring, with a particular emphasis on 1. traumatic brain injury: the “silent epidemic of the third millennium” and 2. hypoxia in newborn children. Survivors present permanent neurological conditions that have a profound impact on the qu...
Voir le projet

 11

 TERMINÉ 

Multiple-actOrs Virtual Empathic CARgiver for the Elder (MoveCare)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

MoveCare develops and field tests an innovative multi-actor platform that supports the independent living of the elder at home by monitoring, assist and promoting activities to counteract decline and social exclusion. It comprises 3 hierarchical layers: 1) A service layer provides monitoring and intervention. It endows objects of everyday use with advanced processing capabilities and integrates th...
Voir le projet

 14

 TERMINÉ 

Renewable residential heating with fast pyrolysis bio-oil (Residue2Heat)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

The overall objective of Residue2Heat is to enable the utilization of sustainable, ash rich biomass and residues in residential heating applications (20-200 kWth) to provide sustainable heat at a competitive price. In this concept, various 2nd generation agricultural, and forestry residue streams are converted into a liquid energy carrier near the biomass origin at an economic viable scale of 15-3...
Voir le projet

 9

 TERMINÉ 

Quality management for building performance - improving energy performance by life cycle quality management (QUANTUM)

Date du début: 1 janv. 2016, Date de fin: 31 déc. 2019,

The estimated average gap between calculated and actual energy performance of the European building stock is 25% for energy performance and 1,5% for comfort performance (as scored by building occupants). Comprehensive research has shown that faultily commissioned and operated building management systems are a main cause for this gap mainly caused by the lack of appropriate and coherent quality man...
Voir le projet

 14