Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

Theory of ultra-fast dynamics in correlated multi-band systems (UfastU)

Date du début: 1 avr. 2017, Date de fin: 31 mars 2022,

Many of the intriguing properties of complex materials, such as magnetism and superconductivity rely on the cooperative behavior of electrons in systems with several active spin and orbital degrees of freedom. Using femtosecond laser pulses it has become possible to probe and control these systems on microscopic timescales. This does not only provide an entirely new approach to understand the emer...
Voir le projet

 1

 TERMINÉ 

Ionic Liquid Interface Dynamcis (ILID)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2021,

The aim of the project is to take the ground-breaking step from our present knowledge of static properties to the understanding and control of dynamical processes at ionic liquid interfaces. Ionic liquids (ILs) are chosen as model systems for liquids in general for two reasons: First, their structural diversity allows their properties to be tailored over a wide range, and second, they can be studi...
Voir le projet

 1

 TERMINÉ 

PRevention Of Malnutrition In Senior Subjects in the EU (PROMISS)

Date du début: 1 avr. 2016, Date de fin: 31 mars 2021,

PROMISS (PRevention Of Malnutrition In Senior Subjects in the EU) is a multi-country project aiming to turn the challenge of tackling malnutrition in community-dwelling older persons into an opportunity for healthy ageing for the future. The PROMISS consortium contains worldwide expertise in epidemiology, clinical trials, geriatrics, nutrition, physical activity, microbiomics, as well as in behavi...
Voir le projet

 24

 TERMINÉ 

RADiation and reliability challenges for electronics used in Space, Avionics, on the Ground and at Accelerators (RADSAGA)

Date du début: 1 mars 2017, Date de fin: 28 févr. 2021,

Reliability and radiation damage issues have a long and important history in the domain of satellites and space missions. Qualification standards were established and expertise was built up in space agencies (ESA), supporting institutes and organizations (CNES, DLR, etc.) as well as universities and specialized companies. During recent years, radiation concerns are gaining attention also in aviati...
Voir le projet

 9

 TERMINÉ 

The European network for observing our changing planet (ERA-PLANET)

Date du début: 1 févr. 2016, Date de fin: 31 janv. 2021,

In the last decade a significant number of projects and programmes in different domains of environmental monitoring and Earth observation have generated a substantial amount of data and knowledge on different aspects related to environmental quality and sustainability. Big data generated by in-situ or satellite platforms are being collected and archived with a plethora of systems and instruments m...
Voir le projet

 38

 TERMINÉ 

The nanoparticle-scope : a new integrated instrument for accurate and reproducible physico-chemical characterisation of nanoparticles (npSCOPE) (npSCOPE)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

The npSCOPE project aims at developing a new integrated instrument (the nanoparticle-scope) optimised for providing a complete physico-chemical characterisation of nanoparticles both in their pristine form or embedded in complex matrices such as biological tissues. Using sophisticated correlative data processing methodologies and algorithms based on statistical methods in conjunction with appropri...
Voir le projet

 9

 TERMINÉ 

3C-SiC Hetero-epitaxiALLy grown on silicon compliancE substrates and 3C-SiC substrates for sustaiNable wide-band-Gap powEr devices (CHALLENGE)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

Silicon carbide presents a high breakdown field (2-4 MV/cm) and a high energy band gap (2.3–3.2 eV), largely higher than for silicon. Within this frame, the cubic polytype of SiC (3C-SiC) is the only one that can be grown on a host substrate with the huge opportunity to grow only the silicon carbide thickness required for the targeted application. The possible growth on silicon substrate has remai...
Voir le projet

 14

 TERMINÉ 

Hybrid Optomechanical Technologies (HOT)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2020,

The hybrid optomechanical technologies (HOT) consortium will lay the foundation for a new generation of devices, which connect, or indeed contain, several platforms at the nanoscale in a single “hybrid” system. As hybrid interfaces they will allow to harness the unique advantages of each subsystem within a nano-scale footprint, while as integrated hybrid devices they will enable entirely novel fun...
Voir le projet

 17

 TERMINÉ 

Applied Public-Private Research enabling OsteoArthritis Clinical Headway (APPROACH)

Date du début: 1 juin 2015, Date de fin: 30 nov. 2020,

The problem: finding the right patient for the right treatmentDespite a large and growing disease burden in osteoarthritis (OA), many pharmaceutical companies have de-emphasized or even abandoned OA drug development due to perceived hurdles. Crucial in this is the lack of appropriate outcome measures that can robustly identify patient benefit from a specific therapy. The lack of specific and sensi...
Voir le projet

 25

 TERMINÉ 

Low energy ELEctron driven chemistry for the advantage of emerging NAno-fabrication methods (ELENA)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,

Chemistry is fundamental to nanotechnology, as chemistry can prepare specifically tailored molecules to serve, in a bottom-up approach, as the building blocks for the fabrication of functional and structured nano-materials. Nanotechnology is the technology of the 21st century with applications from electronics to biotechnology and medicine. The next decade will thus be characterized by an increasi...
Voir le projet

 14

 TERMINÉ 

OMT - Optomechanical Technologies (OMT)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,

The proposed project is built on the successful training and research experience of the leading European research groups working in the field of cavity optomechanics. Our ENT unites a total of 14 leading groups in the field, of which two are major industrial players that utilize MEMS and NEMS - Bosch and IBM. The main goal of the project is to exploit optomechanical interactions in views of novel...
Voir le projet

 14

 TERMINÉ 

Continuous Resolution and Deracemization of Chiral Compounds by Crystallization (CORE)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2020,

Industries are in need of highly skilled academically trained experts and powerful sets of tools enabling the design, control & prediction of optimized & efficient production process of future high-value products such as chiral pharmaceuticals. The CORE Network will in parallel train 15 ESRs and develop tools, approaches and methods within the area of Continuous Resolution (CORE), the process to o...
Voir le projet

 8

 TERMINÉ 

Europäischer Master für Lexikographie / European Master in Lexicography

Date du début: 1 sept. 2015, Date de fin: 31 août 2020,

REFERENCE: 562649-EPP-1-2015-1-DE-EPPKA1-JMD-MOB_EMLexTITLE: European Master in Lexicography, EMLexObjectiveThe master's degree programme European Master in Lexicography (EMLex) is an international course that promotes the international and interdisciplinary training of lexicographers, teaches lexicographical theories at a high international level and shows a pronounced applicability in the practi...
Voir le projet

 8

 TERMINÉ 

A preparative approach to geometric effects in innovative solar cell types based on a nanocylindrical structure (SOLACYLIN)

Date du début: 1 sept. 2015, Date de fin: 31 août 2020,

The ERC Consolidator Grant project SOLACYLIN aims at providing experimental insight into the function of 'third-generation' photovoltaic systems by generating materials stacks structured in a well-defined, accurately tunable, nanocylindrical geometry.To this goal, we will develop and exploit advanced preparative methods based on two fundamental ingredients: (a) ordered 'anodic' porous oxides and (...
Voir le projet

 1

 TERMINÉ 

Micro-scale inhomogeneities in compressed systems and their impact onto the PROCESS- functioning-chain and the PRODUCT-characteristics (Inhomogeneities)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2020,

Compressed fluid systems handled in high pressure processes feature diffusivities smaller than the kinematic viscosity. Therefore during mixing the lifetime of micro(µ)-scale(s) inhomogeneities exceeds that one of macro(m)-scale(s) inhomogeneities. Thus m-s homogeneous systems can still exhibit µ-s inhomogeneities. They affect the functioning-chain of processes, e.g. reactions and phase-transition...
Voir le projet

 1

 TERMINÉ 

MOLECULAR CARPETS ON INSULATING SURFACES: RATIONAL DESIGN OF COVALENT NETWORKS (SURFLINK)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2020,

Inspired by the possibility to create artificial, three-dimensional covalent organic frameworks, the overall aim of this project is to construct novel two-dimensional (2D), covalently-linked, organic networks in a bottom-up approach on insulating surfaces. 2D materials have unique properties suitable for many scientific and technological applications including nano-electronic devices and sensors. ...
Voir le projet

 1

 TERMINÉ 

Structure-Property Relations in Aqueous Foam and Their Control on a Molecular Level (SUPERFOAM)

Date du début: 1 mars 2015, Date de fin: 29 févr. 2020,

Foams are of enormous importance as we find them in many technological relevant applications and food products. Foams as hierarchical materials are dominated by the arrangement and distri-bution of gas bubbles on a macroscopic scale, as well as by thickness and composition of lamella on a mesoscopic scale. Liquid-gas interfaces are, however, the building block of foam with over-whelming importance...
Voir le projet

 1

 TERMINÉ 

Astroparticle and Oscillations Research with Cosmics in the Abyss (ARCA and ORCA) (KM3NeT 2.0)

Date du début: 1 janv. 2017, Date de fin: 31 déc. 2019,

KM3NeT is a large Research Infrastructure that will consist of a network of deep-sea neutrino telescopes in the Mediterranean Sea with user ports for earth and sea sciences. The main science objectives, a description of the technology and a summary of the costs are presented in the KM3NeT 2.0 Letter of Intent. Following the appearance of KM3NeT 2.0 on the ESFRI roadmap 2016 and in line with the re...
Voir le projet

 7

 TERMINÉ 

High sensitivity, portable photonic device for pervasive water quality analysis (WaterSpy)

Date du début: 1 nov. 2016, Date de fin: 31 oct. 2019,

Pervasive and on-line water quality monitoring data is critical for detecting environmental pollution. However, it’s not easy to gather such data, at least not for all contaminants. Currently, water utilities rely heavily on frequent sampling and laboratory analysis in order to acquire this information.For this situation to be improved, portable and high-performance devices for pervasive water qua...
Voir le projet

 9

 TERMINÉ 

MesopOrous matrices for localiZed pH-triggered releAse of theRapeuTic ions and drugs (MOZART)

Date du début: 1 nov. 2015, Date de fin: 31 oct. 2019,

The concept behind MOZART is to develop a library of inorganic nanomatrices to be used as smart platforms for effective, non-invasive and highly targeted therapies. MOZART will address, as proof of concept, nanomatrices to treat delayed bone healing and non-healing chronic skin wounds, which are both characterised by an inflammation and often infection. Mesoporous therapeutic glasses (MTGs), doped...
Voir le projet

 11

 TERMINÉ 

Biological Membranes in Action: A Unified Approach to Complexation, Scaffolding and Active Transport (MEMBRANESACT)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2019,

In recent breakthrough publications, the effect of fluctuations on the affinity of membrane-confined molecules has been evaluated, and a quantitative model for the time evolution of small adhesion domains has been developed under my leadership. Now I propose to bring my research to a new level by tackling the problem of active and passive organisation of proteins into macromolecular structures on ...
Voir le projet

 2

 TERMINÉ 

Modelling the PRocesses leading to Organised crime and TerrOrist Networks (PROTON)

Date du début: 1 oct. 2016, Date de fin: 30 sept. 2019,

PROTON aims at improving existing knowledge on the processes of recruitment to organised crime and terrorist networks (OCTN) through an innovative integration between social and computational sciences. Moving beyond the state of the art, this integration will support evidence-based policies at the international, national and local level. To achieve its aim, PROTON will complete three specific obje...
Voir le projet

 20

 TERMINÉ 

Reactor optimisation by membrane enhanced operation (ROMEO)

Date du début: 14 sept. 2015, Date de fin: 13 sept. 2019,

The integration of reaction and downstream processing steps into a single unit is of central importance in order to achieve a new level of process intensification for catalytic driven and eco-friendly reaction systems. This disruptive technology concept has the ability to reduce the total energy consumption of large volume industrial processes by up to 78%. Additionally, emissions can be reduced b...
Voir le projet

 10

 TERMINÉ 

Enhancing Learning In Teaching via e-inquiries

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

On the basis of the priorities of “Education and Training” EC policy agenda, we seek to establish a Strategic Partnership under the ERASMUS+ framework, with an aim to provide digital professional learning opportunities for secondary teachers’ competence development. Higher education and research Institutions from Greece, the Netherlands, Spain and Germany, one EU association and one network partic...
Voir le projet

 7

 TERMINÉ 

European Training for Coordinate Metrology 4.0

Date du début: 1 sept. 2016, Date de fin: 31 août 2019,

CONTEXT The EU manufacturing sector accounts for 2 million companies and 33 million jobs; it is the source of 15% of EU GDP and 80% of exports. Digital Manufacturing (i.e. Industry 4.0) is a recent strategy at EU level to support innovation processes (Background Paper on "Digitising European Industry", 30 June 2015, European Commission, DG Connect). Highly qualified labour force remains a key sou...
Voir le projet

 6

 TERMINÉ 

Integrating Technology into Mental Health Care Delivery in Europe (ICare)

Date du début: 1 sept. 2015, Date de fin: 31 août 2019,

The evidence base of Internet-based interventions in the prevention and treatment of mental health conditions has rapidly grown in the past decade. Yet many European countries (e.g., Germany, Austria, Switzerland, Great Britain, The Netherlands, Spain) have not implemented these promising approaches into health systems. Individuals with risk conditions or distinct mental health problems interested...
Voir le projet

 13

 TERMINÉ 

Effect of 4500bar injection pressure and super-critical phase change of surrogate and real-world fuels enriched with additives and powering Diesel engines on soot emissions reduction (IPPAD)

Date du début: 1 sept. 2015, Date de fin: 31 août 2019,

Reduction of soot emissions from Diesel engines will be explored by utilising simultaneously (a) injection pressure between 2000-4500bar, (b) engine operation at supercritical conditions relative to the injected fuel’s critical point and (c) additives that improve atomisation and reduce pollutant formation. The detailed processes of nozzle flow cavitation/boiling, atomisation, phase-change and mix...
Voir le projet

 8

 TERMINÉ 

Sarcopenia and Physical fRailty IN older people: multi-componenT Treatment strategies (SPRINTT)

Date du début: 1 juil. 2014, Date de fin: 30 juin 2019,

The current healthcare systems are built around the traditional paradigm of patients suffering from a single acute illness. They are therefore largely unprepared to face the increasing demands for health services arising from the expansion of an older population with specific medical needs related to multiple chronic disorders. As a consequence, the medical conditions of a large and growing seg...
Voir le projet

 27

 TERMINÉ 

CHEAP AND EFFICIENT APPLICATION OF RELIABLE GROUND SOURCE HEAT EXCHANGERS AND PUMPS (Cheap-GSHPs)

Date du début: 1 juin 2015, Date de fin: 31 mai 2019,

To reduce the total cost of low enthalpy geothermal systems by 20-30 % the project will improve actual drilling/installation technologies and designs of Ground Source Heat Exchangers (GSHE’s). This will be combined with an holistic approach for optimum selection, design and implementation of complete systems across different underground and climate conditions. The proposal will focus on one hand...
Voir le projet

 17

 TERMINÉ 

Astronomy ESFRI and Research Infrastructure Cluster (ASTERICS)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2019,

ASTERICS (Astronomy ESFRI & Research Infrastructure Cluster) aims to address the cross-cutting synergies and common challenges shared by the various Astronomy ESFRI facilities (SKA, CTA, KM3Net & E-ELT). It brings together for the first time, the astronomy, astrophysics and particle astrophysics communities, in addition to other related research infrastructures. The major objectives of ASTERICS ar...
Voir le projet

 24

 TERMINÉ 

Screening for Chronic Kidney Disease (CKD) among Older People across Europe (SCOPE) (SCOPE)

Date du début: 1 mai 2015, Date de fin: 30 avr. 2019,

Chronic kidney disease (CKD) is an important public health problem worldwide, especially in older people. Indeed, population aging in industrialized countries is accompanied by an increase in the prevalence of CKD and its complications. Although its prevalence and the importance of an early diagnosis to prevent complications such as end-renal stage disease (ESRD), screening programme in Europe are...
Voir le projet

 11

 TERMINÉ 

Attosecond physics at nanoscale metal tips - strong field physics in the near-field optics regime (NEARFIELDATTO)

Date du début: 1 avr. 2014, Date de fin: 31 mars 2019,

Electron dynamics in metals and nanostructures take place on attosecond timescales. Until today, these extremely fast processes are little understood let alone utilized. With NearFieldAtto, strong-field driven phenomena at nanoscale metal structures will be explored to elucidate collective electron dynamics and to induce optical-field-driven currents -- on attosecond timescales. We will investigat...
Voir le projet

 1

 TERMINÉ 

Free space photon atom coupling - the art of focusing (PACART)

Date du début: 1 mars 2014, Date de fin: 28 févr. 2019,

A conceptually simple but radically new approach will be explored and developed: the interaction of light with a single atom in free space. No experiment has yet come close to the highest possible coupling efficiency attainable in such a fundamental system. The usual way of enhancing light-matter coupling is to place an atom inside a cavity. Another approach involves setting the atom in the near f...
Voir le projet

 1

 TERMINÉ 

Entirely Self-organized: Arrayed Single-Particle-in-a-Cavity Reactors for Highly Efficient and Selective Catalytic/Photocatalytic Energy Conversion and Solar Light Reaction Engineering (APHOTOREACTOR)

Date du début: 1 mars 2014, Date de fin: 28 févr. 2019,

The proposal is built on the core idea to use an ensemble of multiple level self-organization processes to create a next generation photocatalytic platform that provides unprecedented property and reactivity control. As a main output, the project will yield a novel highly precise combined catalyst/photocatalyst assembly to: 1) provide a massive step ahead in photocatalytic applications such as dir...
Voir le projet

 1

 TERMINÉ 

Turning waste from steel industry into a valuable low cost feedstock for energy intensive industry (RESLAG)

Date du début: 1 sept. 2015, Date de fin: 28 févr. 2019,

The RESLAG project proposal is aligned with the challenges outlined in the call WASTE-1-2014: Moving towards a circular economy through industrial symbiosis. In 2010, the European steel industry generated, as waste, about 21.8 Mt of steel slag. The 76 % of the slag was recycled in applications such as aggregates for construction or road materials, but these sectors were unable to absorb the total ...
Voir le projet

 22

 TERMINÉ 

CO2 LOSS FROM STREAMS IN EUROPEAN KARST SYSTEMS (EURO-KARST)

Date du début: 1 févr. 2017, Date de fin: 31 janv. 2019,

The proposed study aims to elucidate novel aspects about carbon cycling within European karstic watersheds, via stable isotope and flux determinations of dissolved and particulate carbon. Rivers situated in karst bedrock are thought to emit significant quantities of CO2, and due to their large combined surface areas and the abundance of karst terrains worldwide, these features play a crucial but a...
Voir le projet

 1

 TERMINÉ 

Nanophotonics by Nanocrystals, from integration to single photon operation (Phonsi)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2018,

Phonsi is a research and training program on the development of nanophotonic devices by means of colloidal nanocrystals. Working at the cross-roads of nanomaterials and nanophotonics, it brings together multinational and start-up companies with universities and research institutes around a research programme combining the synthesis and analysis of quantum dots (QDs) with the formation of QD-based ...
Voir le projet

 7

 TERMINÉ 

Advanced glasses, Composites And Ceramics for High growth Industries (CoACH)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2018,

The aim of CoACH (Advanced glasses, Composites And Ceramics for High growth Industries) is to offer a multidisciplinary training in the field of high-tech GLASSES, CERAMICS and COMPOSITES based on effective and proven industry-academia cooperation. Our scientific goals are to develop advanced knowledge on glass and ceramic based materials and to develop innovative, cost-competitive, and environmen...
Voir le projet

 9

 TERMINÉ 

Drug-Free Antibacterial Hybrid Biopolymers for Medical Applications (HyMedPoly)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2018,

There is a general consensus that biomedical polymers of natural and synthetic origin should and will play a very important role in the development of new therapeutic strategies to treat diseases. Due to resistance of bacteria to drugs, infection has become one of the toughest problems in the medical world as there are hardly any effective antibiotics left in the fight against many pathogens. This...
Voir le projet

 7

 TERMINÉ 

Nano-tailoring organo-mineral materials -Controlling strength and healing with organic molecules in mineral interfaces (NanoHeal)

Date du début: 1 janv. 2015, Date de fin: 31 déc. 2018,

Cement production for the construction industry contributes up to 5% of anthropogenic CO2 emissions. Developing more environmentally friendly concrete requires the assessment of strength for a diverse range of new cement materials. Similar issues arise during the development of biocompatible cements for medical applications. Properties of naturally cemented materials of organic origin are of key i...
Voir le projet

 9