Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 

DRiving InnoVation in crisis management for European Resilience (DRIVER)

Date du début: 1 mai 2014, Date de fin: 31 oct. 2018,

DRIVER starts from the experience that neither successful R&D nor strong end-user demand always lead to innovation in the Crisis Management (CM) domain. This is a problem since as societies become more complex, increasing scope and unpredictability of potential crises and faster dynamics of major incidents put increasingly stringent demands on CM. European CM capabilities already constitute a matu ...
Voir le projet

 38

 TERMINÉ 

European Robotics Challenges (EuRoC)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2017,

Description The EuRoC project proposes to launch three industry-relevant challenges aimed at sharpening the focus of European manufacturing through a number of application experiments, while adopting an innovative approach which ensures benchmarking and performance evaluation. Within an open call framework, three stages of increasing complex ...
Voir le projet

 16

 TERMINÉ 

Low-toxic cost-efficient environment-friendly antifouling materials (BYEFOULING)

Date du début: 1 déc. 2013, Date de fin: 30 nov. 2017,

The BYEFOULING project will address high volume production of low toxic and environmentally friendly antifouling coatings for mobile and stationary maritime applications. The technology will fulfil the coating requirements as a result of the incorporation of novel antifouling agents and a new set of binders into coating formulations for maritime transportation and fishing vessels, floating devices ...
Voir le projet

 19

 TERMINÉ 
eeEmbedded will develop an open BIM-based holistic collaborative design and simulation platform, a related holistic design methodology, an energy system information model and an integrated information management framework for designing energy-efficient buildings and their optimal energetic embedding in the neighbourhood of surrounding buildings and energy systems. A new design control and monitori ...
Voir le projet

 14

 TERMINÉ 

Lean Intelligent Assembly Automation (LIAA)

Date du début: 2 sept. 2013, Date de fin: 1 sept. 2017,

"LIAA aims to keep assembly jobs in Europe by creating and implementing a framework that enables humans and robots to truly to work together in assembly tasks. Co-working allows the senses and intelligence of the human to be complemented by the strength and endurance of the automation and so obtains the best from each of them, reducing repetitive injuries and costs and enhancing job satisfaction a ...
Voir le projet

 15

 TERMINÉ 
The mission of the NextFactory project is to develop and validate a new type of all-in-one manufacturing technology combining, for the first time, in a single piece of equipment, 3D freeform printing and ultra-precision 3D assembly. This highly flexible and scalable facility will empower microsystem manufacturers - and in particular SMEs - to effectively produce highly miniaturised Smart Products- ...
Voir le projet

 11

 TERMINÉ 

FLUIDGLASS

Date du début: 1 sept. 2013, Date de fin: 31 août 2017,

The FLUIDGLASS project develops a new and innovative concept for multifunctional solar thermal glass façades systems. The FLUIDGLASS approach turns passive glass façades into active transparent solar collectors while at the same time controlling the energy flow through the building envelope.FLUIDGLASS unites four key functionalities in one integrated system: The system firstly acts as a fully tran ...
Voir le projet

 11

 TERMINÉ 

ADvanced OPtical SYStem Design (ADOPSYS)

Date du début: 1 sept. 2013, Date de fin: 31 août 2017,

"There is a severe shortage in the European photonics industry of graduates and PhDs with broad expertise in modelling and design of industrially relevant optical systems and components. This shortage is aggravated because most applied design methodologies are strongly based on previous experience of the designer. In general, these methods also have a limited efficiency because they heavily rely o ...
Voir le projet

 10

 TERMINÉ 

Automated Comparison of X-ray Images for cargo Scanning (ACXIS)

Date du début: 1 sept. 2013, Date de fin: 31 mai 2017,

The main objectives of the project ACXIS are to develop a manufacturer independent reference data base for X-ray images of illegal and legitimate cargo, procedures and algorithms to uniform X-ray images of different cargo scanners and measurement parameters, and an automated identification of potentially illegal cargo. Historic images of real detections and images of illegal cargo mock-ups as well ...
Voir le projet

 7

 TERMINÉ 

Printed Logic for Applications of Screen Matrix Activation Systems (PLASMAS)

Date du début: 1 nov. 2013, Date de fin: 30 avr. 2017,

The EU has lost a significant share of the electronics manufacture sector to the Far East, resulting in a negative trade balance of >€100bn/year within this sector. This is (in part) due to the current manufacturing technologies that are based on subtractive processing that are expensive, wasteful and energy intensive, making manufacture in the EU economically and environmentally unfeasible. Print ...
Voir le projet

 11

 TERMINÉ 

COoperative loGISTICS for sustainable mobility of goods (CO-GISTICS)

Date du début: 1 janv. 2014, Date de fin: 31 mars 2017,

Key logistics stakeholders from seven European cities/logistics hubs (Bordeaux, Frankfurt, Thessaloniki, Trieste, Arad, Bilbao and Vigo) have joined forces to deploy, validate and set-up after project life of five piloted cooperative logistics services combining cooperative mobility services and intelligent cargo with real-life logistical aspects. CO-GISTICS services will increase energy efficienc ...
Voir le projet

 33

 TERMINÉ 
The aim of the project is to develop a completely new manufacturing system for the volume production of miniaturised components by overcoming the challenges on the manufacturing with a wide range of materials (metallic alloys, composites, ceramics and polymers), through: (i) developing a high-throughput, flexible and cost-efficient process by simultaneous electrical-forming and electric-fast-sinte ...
Voir le projet

 17

 TERMINÉ 
"With the use of more advanced, but difficult-to-cut materials, on ever-more sophisticated products, the need to further develop and utilise the particular capabilities of the energy beam (EB) processing techniques seem to become a key enabler for the European industry. Although they are of various nature, a set of key communalities can be identified among EB methods when considered as dwell-time ...
Voir le projet

 11

 TERMINÉ 

Large Area Solid State Intelligent Efficient luminaires (LASSIE-FP7)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2016,

According to a recent study, many solid-state lighting (SSL) products do not fulfill the claimed specifications and a deep market penetration of LED modules is at risk. The main problems are decreasing light intensity and varying light chromaticity due to aging and temperature, as well as poor uniformity of large-area luminaires and poor lighting quality. The main objective of the LASSIE-FP7 conso ...
Voir le projet

 10

 TERMINÉ 

Modelling Reliability under Variability (MoRV)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2016,

While feature sizes are continuously scaled towards atomic dimensions, industry is increasingly confronted with unexpected physical artefacts to be considered at each new technology node. Among these, process variation and parameter degradation lead to reliability concerns impacting integrated circuit design at all abstraction levels. As variation and degradation may become a limiting factor for f ...
Voir le projet

 7

 TERMINÉ 
"The triggering of SOLPROCEL took place when COMSA EMTE and ICFO realized the potential that an organic photovoltaic (OPV) based technology has to be incorporated in transparent modules to generate electricity. Indeed, the OPV technology is the only one capable of producing semitransparent colorless cells providing a clear and undistorted image when looking through the device. It can be perfectly ...
Voir le projet

 7

 TERMINÉ 

The Human Brain Project (HBP)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2016,

Understanding the human brain is one of the greatest challenges facing 21st century science. If we can rise to the challenge, we can gain profound insights into what makes us human, develop new treatments for brain diseases and build revolutionary new computing technologies. Today, for the first time, modern ICT has brought these goals within sight. The goal of the Human Brain Project, part of the ...
Voir le projet

 116

 TERMINÉ 

Enhanced Lightweight Design (ENLIGHT)

Date du début: 1 oct. 2012, Date de fin: 30 sept. 2016,

Lightweight materials such as carbon-fibre reinforced plastics have been used up to now mostly in high-performance cars with relatively high cost & low production volumes. Instead the electric cars of the future require lightweight solutions that not only enable specific design requirements to be respected but are also cost effective and sustainable throughout their lifecycle.ENLIGHT aims to accel ...
Voir le projet

 22

 TERMINÉ 

OSMOsis applications for the Sensing Enterprise (OSMOSE)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2016,

The main objective of the OSMOSE project is to develop a reference architecture, a middleware and some prototypal applications for the Sensing-Liquid Enterprise, by interconnecting Real, Digital and Virtual Worlds in the same way a semi-permeable membrane permits the flow of liquid particles through itself.In concrete terms, the OSMOSE project will design and develop:i.\ta Reference Architecture f ...
Voir le projet

 11

 TERMINÉ 
The vision of ReBORN is to demonstrate strategies and technologies that support a new paradigm for re-use of production equipment in old, renewed and new factories; maximizing the efficiency of this re-use and making the factory design process much easier and straight forward, shortening ramp-up times and increasing production efficiency and flexibility. This paradigm will give new life to decommi ...
Voir le projet

 19

 TERMINÉ 

RetroKit - Toolboxes for systemic retrofitting (RETROKIT)

Date du début: 1 sept. 2012, Date de fin: 31 août 2016,

RetroKit will develop and demonstrate multifunctional, modular, low cost and easy to install prefabricated modules, integrating efficient energy use systems and RES for systemic retrofitting of residential buildings. Aiming at external retrofitting concepts with an integration of internal renovation aspects, semi-prefabricated technological solutions will be clustered in a “RetroKit Toolbox” supp ...
Voir le projet

 20

 TERMINÉ 
"Diamond and other ultra-hard materials possess outstanding mechanical, wear and thermal properties that make them attractive to manufacture a wide range of high value-added products such as high-performance, smart tools. However, due to the extreme properties of this group of materials, efficient and precise generation of complex 3D freeform geometries and structures to meet the needs for a furth ...
Voir le projet

 8

 TERMINÉ 
"Competitive manufacturing industry must be able to react to change and to understand the balance of possible options when making decisions on complex multi-faceted problems. Understanding how best to configure and re-configure a global production network, set against rapidly changing product-service requirements is one such complex problem area. This project aims to provide services that support ...
Voir le projet

 15

 TERMINÉ 
The importance of advanced simulation to the competitiveness of both large and small companies is well established. The principal objective of Fortissimo is to enable European manufacturing, particularly small to medium enterprises (SMEs), to benefit from the efficiency and competitive advantage inherent in the use of simulation. However, the simulation of, for example, high-pressure gas cylinders ...
Voir le projet

 96

 TERMINÉ 
Description SME-suitable robots that assist in managing uncertainty by symbiotic Human-Robot-Interaction and embedded cognition Over two-thirds of European workers in manufacturing are employed in small and medium-sized enterprises (SMEs). While robots are able to carry out repetitive tasks to a h ...
Voir le projet

 26

 TERMINÉ 

Safe Adaptive Software for Fully Electric Vehicles (SafeAdapt)

Date du début: 1 juil. 2013, Date de fin: 30 juin 2016,

The promising advent of fully electric vehicles also means a shift towards fully electrical control of the existing and new vehicle functions. In particular, critical X-by-wire functions require sophisticated redundancy solutions. As a result, the overall Electric/Electronic (E/E) architecture of a vehicle is becoming even more complex and costly.The main idea of SafeAdapt is to develop novel arch ...
Voir le projet

 10

 TERMINÉ 
This project will demonstrate on large scale the sustainable production of bio-fuels based on low-cost microalgae cultures. The full chain of processes from algal ponds to biomass separation, processing for oil and other chemicals extraction, and downstream biofuel production, as well as the use in vehicles, will be implemented on a 10 ha site.Depending on the methodology chosen during the researc ...
Voir le projet

 7

 TERMINÉ 
The mine of the future will exploit mineral raw materials at greater depths than today, requiring completely different approaches compared to today’s deep mines, in order to get mineral rights. Only these eco-efficient mines will contribute to improved access to domestic mineral resources, secure the supply of mineral raw materials for Europe and reduce the import dependency.IntelliMine will contr ...
Voir le projet

 27

 TERMINÉ 
Cyber-physical networks based on embedded systems are part of our society and gain spread and importance. Next generations of aircrafts and cars will be tightly interconnected with each other, with the Internet and other infrastructures. The same holds for many industries and areas of our life. Ubiquitous, highly critical systems go online and create a domain of mixed criticalities, where security ...
Voir le projet

 15

 TERMINÉ 

SUstainable Novel FLexible Organic Watts Efficiently Reliable (SUNFLOWER)

Date du début: 1 oct. 2011, Date de fin: 31 mars 2016,

Organic photovoltaics (OPV) represent the newest generation of technologies in solar power generation, offering the benefits of flexibility, low weight and low cost enabling the development of new consumer nomadic applications and the long term perspective of easy deployment in Building Integrated Photo Voltaics (BIPV) and energy production farms. This is a key opportunity for the EU to further e ...
Voir le projet

 23

 TERMINÉ 

BRilliant Industrial Diode LasEr (BRIDLE)

Date du début: 1 sept. 2012, Date de fin: 29 févr. 2016,

The BRIDLE project seeks to harness the power and efficiency of diode lasers to develop an affordable direct diode laser source for industrial applications requiring the cutting and welding of sheet metal. Specifically, BRIDLE's diode laser will have a power >2kW from a 100um diameter (NA 40%. (This is ~2.5x more powerful, 10x brighter and 1.7x more efficient than the best spectral beam combined d ...
Voir le projet

 8

 TERMINÉ 

Enhancing resource Uptake from Roots under stress in cereal crops (EUROOT)

Date du début: 1 janv. 2012, Date de fin: 31 déc. 2015,

The overall goal of EURoot is to help farmers to face both climate change, which is expected to result in increasingly uneven rainfall, and meet the societal demand for sustainable agriculture with reduced use of water and fertilizers. EURoot objective is to enhance the cereal plant capability to acquire water and nutrients through their roots and maintain growth and performance under stress condi ...
Voir le projet

 20

 TERMINÉ 
"NOTOX will develop and establish a spectrum of systems biological tools including experimental and computational methods for i) organotypic human cell cultures suitable for long term toxicity testing and ii) the identification and analysis of pathways of toxicological relevance. NOTOX will initially use available human HepaRG and primary liver cells as well as mouse small intestine cultures in 3D ...
Voir le projet

 13

 TERMINÉ 
"Assessment of repeated dose toxicity is a standard requirement in human safety evaluation and relies on animal testing as no alternatives are currently accepted for regulatory purposes. An integrated research strategy for the replacement of animal tests needs to comprise the development of biomarkers of long-term toxicity in human target cells. To this aim, the DETECTIVE project will set up a scr ...
Voir le projet

 15

 TERMINÉ 

Dynamic manufacturing of thin-walled work pieces by milling process (DYNAMILL)

Date du début: 1 nov. 2012, Date de fin: 31 oct. 2015,

Lightweight components are gaining in importance in EU key industries with good market growth potential (aerospace, automotive, power generation, medical technology etc.). To achieve weight reductions, complex thin-walled structures are combined with high strength materials. However, the lower stiffness of work pieces leads to severe challenges during the milling process:- Difficulty to achieve hi ...
Voir le projet

 10

 TERMINÉ 
In the global economy, European manufacturers face increased competitive pressure and continuous innovation is required to remain competitive. ICT offer a seemingly boundless source of innovation, promising to deliver precisely the capabilities European manufacturing businesses require to remain competitive and to furthermore enable them to run their business in a sustainable way. However, the pot ...
Voir le projet

 8

 TERMINÉ 
Description TREASORES: producing cheaper large area organic optoelectronic devices using roll-to-roll processes; developing new transparent, conductive, flexible electrodes and better barrier films.TREASORES (Transparent Electrodes for Large Area, Large Scale Production of Organic Optoelectronic Devices) is a project that seeks to develop ...
Voir le projet

 16

 TERMINÉ 
The overall scope of the DAPhNE project is to develop and demonstrate a package of integrated solutions for energy intensive processes (ceramics, cement and glass), based on tuning micro-wave technologies to the material characteristics and on intelligent control systems, to provide real time information about the energy consumption as well as the product quality.Microwave heating is now a well e ...
Voir le projet

 18

 TERMINÉ 
Insights gained in FI-PPP Phase 1 emphasize the need for novel ICT solutions that allow radical improvements for collaboration in business networks. Primary sectors demanding such solutions are Agri-Food and Transport & Logistics industries: several actors (incl. enterprises, authorities, service providers) need to exchange information & communicate across org. borders to conduct business. Current ...
Voir le projet

 39

 TERMINÉ 
Recent years have seen a rapidly growing demand from aeronautic industry regarding function-oriented, highly integrated, energy-efficient and lightweight structures. In advanced composites a promising material was found, which integrates these characteristics allowing for continuously elevating the complexity of new components concerning shape and internal structure. The consequences of this incre ...
Voir le projet

 12