Rechercher des projets européens

Plus de 40 projets européens trouvés

Recherche sur 125080 projets européens

 TERMINÉ 
The EU and Turkey face mounting challenges both in relation to one another and internationally. The EU is confronted with an economic crisis which is likely to make differentiation a growing phenomenon. Turkey faces polarisation between different political forces, the state and civil society. The neighbourhood is unravelling to the east and south and a power shift is under way at global level. Thi ...
Voir le projet

 15

 TERMINÉ 
The EU and the USA have highly-productive, immensely-innovative and excellence-driven research and innovation systems. Acknowledging the particular strengths of each landscape, a balanced transatlantic STI partnership of equals bears great potential and contributes to the ultimate goal of tackling societal challenges and boost economic competitiveness. International cooperation between power nodes ...
Voir le projet

 16

 TERMINÉ 
Vancomycin is the critically important antibiotic to treat neonatal Late Onset Sepsis (LOS) due to Gram positive bacteria in neonates, including Coagulase Negative Staphylococci (CoNS) and Staphylococcus aureus. These organisms also create biofilms which are extremely resistant to antibiotics. The increased incidence of LOS due to bacteria such as CoNS and MRSA in NICUs has led to a marked increas ...
Voir le projet

 14

 TERMINÉ 
The project HERITAG aims to develop an interdisciplinary reform in higher education programmes at master level and continuing education integrating Geo-information Technologies (GIT) applied to cultural heritage documentation, tourism management and entrepreneurship.The project promotes the synergy of three main groups of stakeholders: Universities, industry and Administration. The curricular refo ...
Voir le projet

 16

 TERMINÉ 
In conditions of very low youth labor force participation and unappealing perspectives in employment upon graduation, universities lack capacity to equip their students with entrepreneurial skills. Lack of internships and other professional training opportunities during studies, among others, lead to discouragement, lack of motivation and inactivity among the youth. Large group of GE and KG youth ...
Voir le projet

 16

 TERMINÉ 

Health and Environment-wide Associations based on Large population Surveys (HEALS)

Date du début: 1 oct. 2013, Date de fin: 30 sept. 2018,

Assessing individual exposure to environmental stressors and predicting health outcomes implies that both environmental exposures and epi/genetic variations are reliably measured simultaneously. HEALS (Health and Environment-wide Associations based on Large population Surveys) brings together in an innovative approach a comprehensive array of novel technologies, data analysis and modeling tools th ...
Voir le projet

 37

 TERMINÉ 

BIOMECHATRONIC EPP UPPER LIMB PROSTHESIS (BIOMECHATRONICS EPP)

Date du début: 16 août 2013, Date de fin: 16 avr. 2018,

Upper limb prostheses have made considerable scientific progress in the last 20 years. This progress though is based on velocity control, which is not the best option for subconscious control. Extended Physiological Proprioception (EPP) provides position control and has been proven to be better as a control methodology for upper-limb prostheses than velocity control. EPP is difficult to implement ...
Voir le projet

 1

 TERMINÉ 
The innovative and challenging objective of the MASTER project is the numerical modeling and optimum design of complex carbon nanotube (CNT)-reinforced composite morphologies, via a novel and computationally efficient molecular mechanics-based, multiscale stochastic numerical simulation approach, in conjunction with a robust optimization methodology. The rationale of the project is to propose a ge ...
Voir le projet

 1

 TERMINÉ 

Critical State Soil Mechanics Revisited: Fabric Effects (SOMEF)

Date du début: 1 mars 2012, Date de fin: 28 févr. 2018,

The theory of Critical State Soil Mechanics (CSSM) has become a paradigm within the framework of which elastoplastic soil constitutive models have been developed for the last 50 years. The present project will constructively challenge this paradigm from a missing fundamental perspective, namely the effect of soil fabric on the premises of CSSM.The current CSSM postulates that at critical state the ...
Voir le projet

 4

 TERMINÉ 

Managing Aquatic ecosystems and water Resources under multiple Stress (MARS)

Date du début: 1 févr. 2014, Date de fin: 31 janv. 2018,

"MARS will support managers and policy makers in the practical implementation of the WFD, of related legislation and of the Blueprint to Safeguard Europe’s Water Resources by conducting new research and synthesising existing knowledge concerning effects and management of multiple stressors in surface water and groundwater bodies; by advising the 3rd RMBP cycle and the revision of the WFD; and by d ...
Voir le projet

 25

 TERMINÉ 

Quality Assurance for Essential Climate Variables (QA4ECV)

Date du début: 27 sept. 2013, Date de fin: 1 janv. 2018,

Policy makers are increasingly relying on Earth Observation (EO) data to make decisions on mitigating and adapting to climate change. These decisions need to be 'evidence-based' and this requires complete confidence in EO-derived products. Although EO data is plentiful, it is rare to have reliable, traceable and understandable quality information. The situation is often further confused because va ...
Voir le projet

 19

 TERMINÉ 

Nanostructured Biocompatible/Bioactive Materials (NanoBioMat)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2017,

The primary goal of the Joint Exchange Program (Project) is to create multicomponent materials for biomedical applications and to combine knowledge and experience of the different scientific groups concerning interdisciplinary milestones of the proposal in order to deliver the final product.In the framework of the Project the following materials: porous and nonporous silica oxides, nanostructured ...
Voir le projet

 4

 TERMINÉ 
With numerous European industries heavily depended on imported REE raw materials, there is a need for EU to secure a viable supply of REE minerals as well as develop from the ground up the currently non-existent European REE extraction and processing industry. The goal of the EURARE project will be (i) to characterize the potential REE resources in Europe; and (ii) to research, develop, optimize a ...
Voir le projet

 23

 TERMINÉ 

Demonstrate Ecosystem Services Enabling Innovation in the Water Sector (DESSIN)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2017,

The main objectives of DESSIN are- To demonstrate and promote innovative solutions to water-related challenges with a focus on: (i) water quality issues related to the implementation of the Water Framework Directive (WFD) and (ii) water scarcity.- To demonstrate a methodology for the valuation of ecosystem services (ESS) as catalyser for innovation in water management.DESSIN will launch demonstrat ...
Voir le projet

 21

 TERMINÉ 

Complex wetting phenomena (COWET)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2017,

Static and dynamic wetting of solid surfaces by liquids is a focus of numerous theoretical, computational and experimental investigations. Most of the research and training activities are focused on the wetting of simple solids by one-component liquids. However, a wide variety of industrial processes mostly include wetting/spreading of complex multiphase liquids over heterogeneous, structured or ( ...
Voir le projet

 13

 TERMINÉ 
"Innovative processes with streamlining and improved control will be conducted in FIBRALSPEC, through Unit for Continuous PAN-based Carbon Fiber Pilot Production. Testing of laminates and prepregs production based the new developed carbon fibres followed by manufacturing of laminates/coupons and high-performance filament wound tubes are also foreseen (equipment for delivering precise volumes the m ...
Voir le projet

 11

 TERMINÉ 

Preparing for Extreme And Rare events in coastaL regions (PEARL)

Date du début: 1 janv. 2014, Date de fin: 31 déc. 2017,

"Coastal floods are one of the most dangerous and harmful natural hazards affecting urban areas adjacent to shorelines. Rapid urbanisation combined with climate change and poor governance means a significant increase in the risk of local surface flooding coinciding with high water levels in rivers and high tide or storm surges from the sea, posing a greater risk of devastation to coastal communiti ...
Voir le projet

 26

 TERMINÉ 
"DISCOVERY aims at supporting dialogues between Europe and North America (US and Canada); and fostering cooperation in collaborative ICT R&I, both under Horizon 2020 and under US and Canada funding programmes. With this purpose, DISCOVERY proposes a radically new approach to engage more actively and strategically in supporting dialogues and partnership building for ICT R&I cooperation. At the core ...
Voir le projet

 9

 TERMINÉ 

Low-toxic cost-efficient environment-friendly antifouling materials (BYEFOULING)

Date du début: 1 déc. 2013, Date de fin: 30 nov. 2017,

The BYEFOULING project will address high volume production of low toxic and environmentally friendly antifouling coatings for mobile and stationary maritime applications. The technology will fulfil the coating requirements as a result of the incorporation of novel antifouling agents and a new set of binders into coating formulations for maritime transportation and fishing vessels, floating devices ...
Voir le projet

 19

 TERMINÉ 
A new EU 7th Framework Programme project, “LEANWIND” (Logistic Efficiencies And Naval architecture for Wind Installations with Novel Developments) seeks to apply lean principles to the offshore wind farm project lifecycle. The primary LEANWIND objective is to provide cost reductions across the offshore wind farm lifecycle and supply chain through the application of lean principles and the developm ...
Voir le projet

 32

 TERMINÉ 

THE MICRO ALGAE BIOREFINERY (D-FACTORY)

Date du début: 1 déc. 2013, Date de fin: 30 nov. 2017,

The D-Factory aims to set a world benchmark for a sustainable biorefinery based on biomass from halophilic microalgae. Representing the largest (100s ha) of current commercial cultivation technologies for any microalga, Dunaliella microalgal biomass production uses raceways and lakes, and will be expanded with biorefinery concepts by drawing in European innovations in key biomass processing techno ...
Voir le projet

 14

 TERMINÉ 

AdVanced Aerodynamic Tools for lArge Rotors (AVATAR)

Date du début: 1 nov. 2013, Date de fin: 31 oct. 2017,

The motivation for the AVATAR project lies in the fact that upscaling wind turbine designs towards 10-20 MW requires radical innovations to make this feasible. Many of these innovationshave a strong aerodynamic component and can be considered as unconventional from an aerodynamic point of view. As such the analysis of the resulting rotor designs falls outside the validated range of applicability o ...
Voir le projet

 14

 TERMINÉ 
The overall objectives of the INNWIND.EU project are the high performance innovative design of a beyond-state-of-the-art 10-20MW offshore wind turbine and hardware demonstrators of some of the critical components. These ambitious primary objectives lead to a set of secondary objectives, which are the specific innovations, new concepts, new technologies and proof of concepts at the sub system and t ...
Voir le projet

 29

 TERMINÉ 
"ECCO-MATE aims to create a research and training platform for the development and implementation of novel fuel mixture preparation, injection profiling, air management and staged/low temperature combustion technologies both in marine and light-duty automotive diesel engines. The marine (slow speed, large-sized, two-stroke engines) and land-transport (high speed, small-to-medium-sized, four-stroke ...
Voir le projet

 12

 TERMINÉ 
"Our aim is to create a multiannual joint programme dedicated to exchanges of research staff between European (Sweden, Greece, UK) research entities and other third countries (Brazil, Belarus, and In-dia) to increase knowledge on adipose tissue plasticity and human thermogenesis. The proposal stems from recent reports suggesting that mammalian adipose tissue has the ability to alter its structure ...
Voir le projet

 3

 TERMINÉ 
"Cardio-metabolic disorders (CMD) represent a heavy public health burden for Europe which has one of the highest adult mortality rates in the world, primarily due to a very high incidence of CMD. The 2011 FP7 Health Work Programme included three Calls targeted specifically on understanding CMD nature and pathophysiology, while the World Health Organization Regional Office for Europe recently recog ...
Voir le projet

 3

 TERMINÉ 

Low Emissions Core-Engine Technologies (LEMCOTEC)

Date du début: 1 oct. 2011, Date de fin: 30 juin 2017,

The main objective of the LEMCOTEC project will be the improvement of core-engine thermal efficiency by increasing the overall pressure ratio (OPR) to up to 70 leading to a further reduction of CO2. Since NOx increases with OPR, combustion technologies have to be further developed, at the same time, to at least compensate for this effect. The project will attain and exceed the ACARE targets for 20 ...
Voir le projet

 39

 TERMINÉ 

Open Project for the European Radiation Research Area (OPERRA)

Date du début: 1 juin 2013, Date de fin: 31 mai 2017,

"Within the OPERRA project, it is proposed that the MELODI Association, as a well-advanced network, takes the lead in establishing the necessary structures able to manage the long-term European research programmes in radiation protection, also taking advantage of the valuable experience gathered through the DoReMi network of excellence. Whilst in fields adjacent to low-dose risk research (radioeco ...
Voir le projet

 71

 TERMINÉ 
The objective of the HELMETH project is the proof of concept of a highly efficient Power-to-Gas (P2G) technology with methane as a chemical storage and by thermally integrating high temperature electrolysis (SOEC technology) with methanation. This thermal integration balancing the exothermal and endothermal processes is an innovation with a high potential for a most energy-efficient storage soluti ...
Voir le projet

 7

 TERMINÉ 
In vapour-compression cycles (VCC) and more specifically in heat pumps, mechanical work is supplied to the compressor for increasing the pressure of the evaporated refrigerant. Heat is rejected in the condenser (effective heating at heating mode), for the condensation of the refrigerant, which is then expanded in a throttle valve (no power produced), in order to decrease its pressure, resulting to ...
Voir le projet

 8

 TERMINÉ 
Since 2008, Europe has been shaken by an ongoing crisis. If relevant parts of populations are exposed to socioeconomic risks, it is a distinctive characteristic of European political ethics that they must not be left alone, but should be subject to support and solidarity by budget support policy, economic development policies and social policy at different levels. But, in analogy with medical and ...
Voir le projet

 10

 TERMINÉ 

New Technologies for Tunnelling and Underground Works (NETTUN)

Date du début: 1 sept. 2012, Date de fin: 28 févr. 2017,

The NeTTUN 54M project will enable groundbreaking change in the construction, management and maintenance of tunnels in pursuit of the goals of NMP.2011.4.0-2 via 9 focussed WPs addressing key scientific and technical challenges: (i) a multi-sensor ground prediction system for TBMs to enable effective look-ahead during boring; (ii) a robotic maintenance system that enables automation of inspection ...
Voir le projet

 24

 TERMINÉ 
The project aims to deal with the numerous requirements of facade panel retrofitting by developing a light-weight, durable, cost effective and high performance panel. Its layered structure allows for separate but also synergistic function regarding high thermal and acoustic insulation, excellent mechanical properties, up to standards flame retardancy and photocatalytic activity. Employing nanofill ...
Voir le projet

 10

 TERMINÉ 
...romises to redefine fall prevention by motivating people to be more active, in a friendly way and with tele-supervision if necessary. By covering the entire value-chain (academics: National Technical University of Athens, University of Orléans, University of Barcelona; private research organization: CEIT; Industry: SingularLogic, BRAINSTORM, MEDeTIC, health service provider: MEDeTIC), KINOPTIM int ...
Voir le projet

 8

 TERMINÉ 
Cultural expression is not limited to architecture, monuments or collections of artifacts. It also includes fragile intangible live expressions, which involve knowledge and skills. Such expressions include music, dance, singing, theatre, human skills and craftsmanship.These manifestations of human intelligence and creativeness constitute our Intangible Cultural Heritage (ICH). ICH is at the same t ...
Voir le projet

 17

 TERMINÉ 

Spaces of possibility for the creative re-use of Europeana's content (Europeana Space)

Date du début: 1 févr. 2014, Date de fin: 31 janv. 2017,

The objective of Europeana Space is to increase and enhance the creative industries' use of Europeana by delivering a range of resources to support their engagement. The use of Europeana by the creative industries is still limited by factors including issues around the IPR status of content and the need for business models demonstrating the potential for exploitation of available content. In addr ...
Voir le projet

 29

 TERMINÉ 

Europeana Sounds

Date du début: 1 févr. 2014, Date de fin: 31 janv. 2017,

The Europeana Sounds is Europeana's 'missing' fifth domain aggregator, joining APEX (Archives), EUscreen (television), the Europeana Film Gateway (film) and TEL (libraries). It will increase the opportunities for access to and creative re-use of Europeana's audio and audio-related content and will build a sustainable best practice network of stakeholders in the content value chain to aggregate, en ...
Voir le projet

 24

 TERMINÉ 
eNanoMapper will develop a data management and analysis infrastructure together with ontologies supporting the safety assessment activities of the European Nanomaterials research and development community. The project will address the requirements of safety assessment of nanomaterials by providing databases, analysis tools and ontologies for risk assessment and linking them with existing resources ...
Voir le projet

 11

 TERMINÉ 
Construct-PV will develop and demonstrate customizable, efficient, and low cost BIPV for opaque surfaces of buildings. Opaque surfaces are selected because they represent massive wide-area spaces of untapped harvesting potential across Europe. To develop highly efficient systems, most promising PV technologies have been selected, i.e. back contact cells fabricated with MWT technology, extensively ...
Voir le projet

 12

 TERMINÉ 

STI International Cooperation Network for Eastern Partnership Countries (INCONET EAP)

Date du début: 1 sept. 2013, Date de fin: 31 déc. 2016,

The project aims to support the advancement of the bi-regional STI policy dialogue between the EU MS/AC and the Eastern Partnership countries, with an explicit focus on the Societal Challenges that have been identified to be of mutual interest for the two regions, namely Climate Change, Energy and Health. In particular the project will identify actions and stakeholders and will implement innovativ ...
Voir le projet

 21